Search NASA⌕ Search

SEARCH · Search NASA

Results for “test correlation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Using angular two-point correlations to self-calibrate the photometric redshift distributions of DECaLS DR9

Calibrating the redshift distributions of photometric galaxy samples is essential in weak lensing studies. The self-calibration method combines angular auto- and cross-correlations between galaxies in multiple photometric redshift (photo-z) bins to reconstruct the scattering rates matrix between redshift bins. In this paper, we test a recently proposed self-calibration algorithm using the DECaLS Data Release 9 and investigate to what extent the scattering rates are determined. We first mitigate the spurious angular correlations due to imaging systematics by a machine learning based method. We then improve the algorithm for χ 2 minimization and error estimation. Finally, we solve for the scattering matrices, carry out a series of consistency tests, and find reasonable agreements: (1) finer photo-z bins return a high-resolution scattering matrix, and it is broadly consistent with the low-resolution matrix from wider bins; (2) the scattering matrix from the Northern Galactic Cap is almost identical to that from Southern Galactic Cap; (3) the scattering matrices are in reasonable agreement with those constructed from the power spectrum and the weighted spectroscopic subsample. We also evaluate the impact of cosmic magnification. Although it changes little the diagonal elements of the scattering matrix, it affects the off-diagonals significantly. The scattering matrix also shows some dependence on scale cut of input correlations, which may be related to a known numerical degeneracy between certain scattering pairs. In conclusion, this work demonstrates the feasibility of the self-calibration method in real data and provides a practical alternative to calibrate the redshift distributions of photometric samples.

79 ASTRONOMY AND ASTROPHYSICS↗

Altered white matter connectivity in patients with schizophrenia: An investigation using public neuroimaging data from SchizConnect

Several studies have produced extensive evidence on white matter abnormalities in schizophrenia (SZ). However, optimum consistency and reproducibility have not been achieved, and reported low white matter tract integrity in patients with SZ varies between studies. A whole-brain imaging study with a large sample size is needed. This study aimed to investigate white matter integrity in the corpus callosum and connections between regions of interests (ROIs) in the same hemisphere in 122 patients with SZ and 129 healthy controls with public neuroimaging data from SchizConnect. For each diffusion-weighted image (DWI), two-tensor full-brain tractography was performed; DWIs were parcellated by processing and registering T1 images with FreeSurfer and Advanced Normalization Tools. White matter query language was used to extract white matter fiber tracts. We evaluated group differences in means of diffusion measures between the patients and controls, and correlations of diffusion measures with the severity of clinical symptoms and cognitive impairment in the patients using the Positive and Negative Syndrome Scale (PANSS), a letter-number sequencing (LNS) test, vocabulary test, letter fluency test, category fluency test, and trail-making test, part A. To correct for multiple comparisons, a false discovery rate of q < 0.05 was applied. In patients with SZ, we observed significant radial diffusivity (RD) and trace (TR) increases in left thalamo-occipital tracts and the right uncinate fascicle, and a significant RD increase in the right middle longitudinal fascicle (MDLF) and the right superior longitudinal fascicle ii. Correlations were present between TR of left thalamo-occipital tracts, and the letter fluency test and the LNS test, and RD in the right MDLF and PANSS positive subscale score. However, these correlations were not significant after correction for multiple comparisons. These results indicated widespread white matter fiber tract abnormalities in patients with SZ, contributing to SZ pathophysiology.

60 APPLIED LIFE SCIENCES↗

Circular RNA HIPK3 exerts oncogenic properties through suppression of miR-124 in lung cancer

Highlights: • CircHIPK3 is upregulated in human lung cancer cells. • CircHIPK3 siRNA inhibits lung cancer cell survival and proliferation. • CircHIPK3 overexpression promotes lung cancer cell survival and proliferation. • CircHIPK3 regulates expression miR-124 and its targets in lung cancer cells. • CircHIPK3 upregulation correlates with miR-124 downregulation in human lung cancer tissues. The current study tested the expression and potential functions of circular RNA HIPK3 (circHIPK3) in human lung cancer. Our results show that circHIPK3 expression is upregulated in established (A549 line) and primary human lung cancer cells, when compared to its low level in the lung epithelial cells. siRNA-mediated silencing of circHIPK3 potently inhibited survival and proliferation of lung cancer cells, but inducing significant apoptosis activation. Contrarily, forced overexpression of circHIPK3 by a lentiviral construct promoted lung cancer cell survival and proliferation. CircHIPK3 acted as a microRNA-124 (miR-124) sponger and regulated the expression of miR-124 mRNA targets, including SphK1, CDK4 and STAT3, in lung cancer cells. Transfection of miR-124 inhibitor significantly inhibited circHIPK3 siRNA-induced lung cancer cell death and apoptosis. At last, we show that circHIPK3 levels are upregulated in human lung cancer tissues, correlated with miR-124 downregulation. The miR-124 targets (SphK1, STAT3 and CDK4) are upregulated in lung cancer tissues. Together, we propose that circHIPK3 promotes lung cancer cell progression possibly by sponging miR-124. These observations indicate a possible novel therapeutic strategy involving circHIPK3-miR-124 pathway against lung cancer.

60 APPLIED LIFE SCIENCES↗

Feasibility of using thermal response methods for nonintrusive compressed air flow measurement

Robust, low-cost nonintrusive flow meters are of interest in many industries. Particularly, a reliable nonintrusive flow measurement for the diagnosis of air leaks in compressed air systems is desirable. Measurement of the air flow due to leaks in the system ensures an accurate estimation of potential cost and energy savings. This study evaluates a novel method of using thermal responses to nonintrusively measure leakage rates in compressed air lines. The method uses heat and the resulting thermal response to calculate the flow rate inside the compressed air line. Compared to the current methods for flow measurement, this method can simplify flow measurement while decreasing the sensitivity to errors when measuring flow rates. In this study, the methodology of the proposed method is explained along with the potential advantages to the design. Two approaches are evaluated: a dynamic step response and sinusoidal frequency response. Simulated tests evaluate the feasibility of the proposed methods, followed by experiments that validate the simulation results. A clear correlation between the thermal step response and the flow rate indicate viability of the proposed method in simulation. Experimental results yielded similar results, confirming the validity of the proposed method. The results of a field test in an industrial environment demonstrate the capability of the approach to other flow rate measurement techniques.

42 ENGINEERING↗

Surface rheology and interface stability.

We have developed a mature laboratory at Sandia to measure interfacial rheology, using a combination of home-built, commercially available, and customized commercial tools. An Interfacial Shear Rheometer (KSV ISR-400) was modified and the software improved to increase sensitivity and reliability. Another shear rheometer, a TA Instruments AR-G2, was equipped with a du Nouey ring, bicone geometry, and a double wall ring. These interfacial attachments were compared to each other and to the ISR. The best results with the AR-G2 were obtained with the du Nouey ring. A Micro-Interfacial Rheometer (MIR) was developed in house to obtain the much higher sensitivity given by a smaller probe. However, it was found to be difficult to apply this technique for highly elastic surfaces. Interfaces also exhibit dilatational rheology when the interface changes area, such as occurs when bubbles grow or shrink. To measure this rheological response we developed a Surface Dilatational Rheometer (SDR), in which changes in surface tension with surface area are measured during the oscillation of the volume of a pendant drop or bubble. All instruments were tested with various surfactant solutions to determine the limitations of each. In addition, foaming capability and foam stability were tested and compared with the rheology data. It was found that there was no clear correlation of surface rheology with foaming/defoaming with different types of surfactants, but, within a family of surfactants, rheology could predict the foam stability. Diffusion of surfactants to the interface and the behavior of polyelectrolytes were two subjects studied with the new equipment. Finally, surface rheological terms were added to a finite element Navier-Stokes solver and preliminary testing of the code completed. Recommendations for improved implementation were given. When completed we plan to use the computations to better interpret the experimental data and account for the effects of the underlying bulk fluid.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Searching for Conformity Across Cosmic Time with Local Group and Local Volume Star Formation Histories

Conformity denotes the correlation of properties between pairs of galaxies as a function of separation. Correlations between properties such as the star formation rate (SFR), stellar mass, and specific star formation rate (sSFR) have implications for the impact of environment upon galaxy formation and evolution. Conformity between primary galaxies and satellites within the same dark matter halo has been well documented in simulations and observations. However, the existence of conformity at greater distances—known as two-halo conformity—remains uncertain. We investigate whether galaxies in the Local Volume to a distance of 4 Mpc show conformity by examining the SFR, sSFR, stellar mass, and quenched fraction as a function of physical separation. Making use of the star formation histories of these galaxies, we then extend this analysis back in time to offer the first probe of conformity inside our past light cone. At the present day, we find that the stellar mass or sSFR of a galaxy correlates with the median SFR of neighboring galaxies at a separation of 2–3 Mpc. At a lookback time of 1 Gyr, we find a correlation with the quenched fraction of neighboring galaxies, again at a 2–3 Mpc separation. These signals of conformity likely arise from the differences between the recent star formation histories of Local Group dwarf galaxies and those outside the Local Group. As current and future missions including JWST, Rubin, and Roman expand the sample of Local Volume galaxies, tests of conformity using star formation histories will provide an important tool for exploring spatiotemporal correlations between galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗

Exploring the Random Phase Approximately for materials chemistry and physics

This proposal focuses on improved accuracy for the delicate energy differences of interest in materials chemistry with the fully nonlocal random phase approximation (RPA) in a density functional context. Could RPA or RPA-like approaches become standard methods of first-principles electronic-structure calculation for atoms, molecules, solids, surfaces, and nano-structures? Direct RPA includes the full exact exchange energy and a nonlocal correlation energy from the occupied and unoccupied Kohn-Sham orbitals and orbital energies, with an approximate but universal description of long-range van der Waals attraction. RPA also improves upon simple pair-wise interaction potentials or vdW density functional theory. This improvement is essential to capture accurate energy differences in metals and different phases of semiconductors. The applications in this proposal are challenges for the simpler approximations of Kohn-Sham density functional theory, which are part of the current “standard model” for quantum chemistry and condensed matter physics. Within this project we already applied RPA on different structural phase transitions on semiconductors, metals and molecules. Although RPA predicts accurate structural parameters, RPA has proven not equally accurate in all kinds of structural phase transitions. Therefore a correction to RPA can be necessary in many cases. We are currently implementing and testing a nonempirical, spatially nonlocal, frequency-dependent model for the exchange-correlation kernel in the adiabatic-connection fluctuation-dissipation context. This kernel predicts a nearly-exact correlation energy for the electron gas of uniform density. If RPA or RPA-like approaches prove to be reliably accurate, then expected increases in computer power may make them standard in the electronic-structure calculations of the future.

74 ATOMIC AND MOLECULAR PHYSICS↗

Research on the influence of anaerobic stabilization of various dairy sewage sludge on biodegradation of polycyclic aromatic hydrocarbons PAHs with the use of effective microorganisms

Sewage sludge was taken from a dairy WWTP belonging to Mlekovita Cooperative in Wysokie Mazowieckie. There were excess sludge, flotation sludge and a mixture of excess and flotation sludge from pre-treatment of dairy sewage. The initial content of 16 PAHs in excess sludge before fermentation was approximately 689 µg·kg{sup −1} in dry mass, whereas in post-flotation sludge (which constituted around 30% of raw sludge) it was approximately 95 µg·kg{sup −1} in dry mass. A mixture of excess and flotation sludge had the content of 497,7 µg·kg{sup −1} in dry mass. Through comparison of particular hydrocarbons content in raw sewage sludge to the total PAHs content, it was shown that tricyclic compounds, which constituted 46,3% of the PAHs sum (excess sludge), and tetracyclic compounds, which constituted 60,0% of the PAHs sum (flotation sludge), were the dominating fractions. In the sludge subjected to fermentation in reactors with mixed sludge and surplus activated sludge, the general trend of the course of changes in concentrations of PAHs was similar. Both in the sludge inoculated with EM and in that not inoculated with EM, a significant increase in the total PAHs contents was observed in the first fermentation phase (acidic fermentation) after 7 days of the process. Addition of EM into the sludge did not prevent the PAHs release, and therefore higher concentrations of PAHs sum were recorded during the hydrolysis stage than in sludge before fermentation. A decrease in the sum of PAHs was observed after 2 weeks of fermentation in relation to the quantity observed after 1 week of fermentation (except from post-flotation sludge). In the following weeks, there was further decrease in the concentration of the 16 PAHs sum in all sludge types. However, in sludge without EM inoculation, it was lower than in sludge with EM inoculation. The loss of the majority of tested hydrocarbons was reported in the final phase of fermentation. - Highlights: • The influence of applying Effective Microorganisms on PAHs degradation in dairy sewage sludge during fermentation has been examined. • To study the relationship between quantitative parameters and to describe the correlation strength, Spearman's rank correlation coefficient was used. • In order to verify whether there was a statistically significant change, the Wilcoxon test was applied for individual observation pairs.

54 ENVIRONMENTAL SCIENCES↗

Cost-effective fabrication of (g-C3N4 + Mo) added photostable ZnO thin films for enhanced visible light responsive photocatalytic dye degradation

Highlights: • First report on ZnO:Mo/GCN films prepared by simple cost-effective jet nebulizer spray method for dye degradation. • A remarkable enhancement in the photocatalytic dye degradation efficiency is achieved for ZnO. • The mechanism for the enhanced degradation is explained on the basis of the obtained point of zero charge values. • Optical, PL, SEM and XPS studies support the discussion on the photocatalytic property of ZnO:Mo/GCN. - Abstract: The photocatalytic activity of ZnO:Mo/GCN (ZnO:Molybdenum/g-C{sub 3}N{sub 4}) thin films deposited using a simple cost-effective jet nebulizer spray pyrolysis technique with different Mo doping concentrations (1,2 and 3 at.%) was studied. The photocatalytic degradation test was carried out against Methylene blue (MB) and Rhodamine B (RhB) dyes under visible light. It is found that thin film of ZnO:Mo/GCN with 1 at.% of Mo exhibits superior photocatalytic efficiency compared with the other samples. The degradation rate constant of this sample is 0.0727 and 0.0268 min{sup −1} for the tested MB and RhB dyes, respectively which are nearly two times and four times greater than the respective rate constant values of pristine ZnO. The mechanism involved in the enhanced photocatalytic activity is addressed with the help of obtained results. The properties of the deposited samples are correlated appropriately with the photocatalytic efficiency of the samples. The photostability of the prepared catalysts is tested experimentally.

36 MATERIALS SCIENCE↗

Progress Report on Computing Excited-State Hadron Masses in Lattice QCD

Our progress in computing the spectrum of excited baryons and mesons in lattice QCD is described. Sets of spatially-extended hadron operators with a variety of different momenta are used. A new method of stochastically estimating the low-lying effects of quark propagation is utilized which allows reliable determinations of temporal correlations of both single-hadron and multi-hadron operators. The method is tested on the isoscalar mesons in the scalar, pseudoscalar, and vector channels, and on the two-pion system of total isospin I = 0,1,2.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

On the Direct Correlation between Gamma-Rays and PeV Neutrinos from Blazars

We study the frequently used assumption in multi-messenger astrophysics that the gamma-ray and neutrino fluxes are directly connected because they are assumed to be produced by the same photohadronic production chain. An interesting candidate source for this test is the flat-spectrum radio quasar PKS B1424-418, which recently called attention to a potential correlation between an IceCube PeV neutrino event and its burst phase. We simulate both the multi-waveband photon and the neutrino emission from this source using a self-consistent radiation model. We demonstrate that a simple hadronic model cannot adequately describe the spectral energy distribution for this source, but a lepto-hadronic model with a subdominant hadronic component can reproduce the multi-waveband photon spectrum observed during various activity phases of the blazar. As a conclusion, up to about 0.3 neutrino events may coincide with the burst, which implies that the leptonic contribution dominates in the relevant energy band. We also demonstrate that the time-wise correlation between the neutrino event and burst phase is weak.

79 ASTRONOMY AND ASTROPHYSICS↗

Space-time generalization of mutual information

The mutual information characterizes correlations between spatially separated regions of a system. Yet, in experiments we often measure dynamical correlations, which involve probing operators that are also separated in time. Here, we introduce a space-time generalization of mutual information which, by construction, satisfies several natural properties of the mutual information and at the same time characterizes correlations across subsystems that are separated in time. In particular, this quantity, that we call the space-time mutual information, bounds all dynamical correlations. We construct this quantity based on the idea of the quantum hypothesis testing. As a by-product, our definition provides a transparent interpretation in terms of an experimentally accessible setup. We draw connections with other notions in quantum information theory, such as quantum channel discrimination. Finally, we study the behavior of the space-time mutual information in several settings and contrast its long-time behavior in many-body localizing and thermalizing systems.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Experimental and Computational Heat Transfer Study of sCO 2 Single-Jet Impingement

This study experimentally and computationally investigates the heat transfer capability of supercritical carbon dioxide (sCO 2 ) single jet impingement. The evaluated jet Reynolds number range is between 80,000 and 600,000, with a nondimensional jet-to-target surface spacing of 2.8. CO 2 -impinging jet stagnation conditions were maintained at approximately 200 bar and a temperature of ∼400 °C for most experiments. The goal is to understand how changes in the aforementioned parameters influence heat transfer between the working fluid and the heated surface. Additionally, due to the elevated Reynolds numbers and difference in thermodynamic properties between air and CO 2 , air-derived impingement correlations may not be appropriate for CO 2 impingement; these correlations will be evaluated against experimental sCO 2 impingement data. At the time of this study, no sCO 2 impingement data was available relevant to sCO 2 power cycles. The target surface is a 1.5-in. diameter copper block centered on the 3 mm jet orifice. A mica heating element bolted to the bottom of the copper block provides a uniform heat flux. Thermocouples embedded in the copper block are used to determine the surface temperature. Nusselt numbers obtained from experimental sCO 2 test data are compared to area-averaged Nusselt numbers from air-derived correlations. The comparisons showed that air correlations drastically underpredict the heat transfer when sCO 2 is used as the working fluid. A modified sCO 2 correlation using experimental data at discussed conditions is derived based on an existing air correlation. A CFD study is also performed to further investigate sCO 2 heat transfer characteristics, and assess the numerical model applicability to this problem type.

42 ENGINEERING↗

An Experimental and Modeling Investigation on High-Rate Formability of Aluminum

This work describes the integrated experimental and modeling effort at PNNL to enhance the room-temperature formability of aluminum alloys by taking advantage of formability improvements generally associated with high-strain-rate forming. Al alloy AA5182-O sheets were deformed in near plane-strain conditions at strain-rates exceeding 1000 /s using the electrohydraulic forming (EHF) technique, and at quasi-static strain-rates via a bulge test. A novel capability, combining high-speed imaging with digital image correlation technique, was developed to quantify the deformation history during high-rate forming. Sheet deformation under high rates was modeled in Abaqus and validated with experimentally determined deformation data. The experimental results show a ~2.5x increase in formability at high rates, relative to quasi-static rates, under a proportional loading path that was verified by the experimental data. The model shows good correlation with the experimentally determined strain path. It is anticipated that such integrated experimental and modeling work will enable room-temperature forming of Al and industrial implementation of high-rate forming processes.

Rohatgi, Aashish↗

Increasing the Pressure‐Free Stripping Capacity of the Lithium Metal Anode in Solid‐State‐Batteries by Carbon Nanotubes

Abstract Lithium metal is the key anode material for solid‐state‐batteries as its successful implementation will drastically increase their energy and power densities. However, anode contact loss during stripping leads to dendrites upon plating and subsequent cell failure. Design strategies to mitigate these issues are crucial to enable the use of lithium metal anodes. This paper reports the dissolution kinetics of composite anodes made of lithium metal and carbon nanotubes (CNTs) with a garnet‐type solid electrolyte (SE). In addition to an enhancement of the effective diffusion within the anode, its dissolution is fundamentally changed from being 2D to 3D. By maintaining contact with the SE, the CNTs facilitate lithium transport to the interface, which yields more than 20 mAh cm −2 discharge capacity at 100 µ A cm −2 without the application of external stack pressure ( > 1 MPa). Conclusions drawn from electrochemical data on the anode microstructure are validated using cryo‐focused‐ion‐beam scanning electron microscopy and correlated with the mechanical properties. Micro‐indentation, acoustic analysis, and stress–strain testing show that mechanical properties of the anode, like yield strength and hardness, are adjustable. Overall, it is shown that the mechanical and electrochemical properties of Li–CNT composite electrodes can be tailored to suit the requirements of a practical cell.

Fuchs, Till↗

In situ observation of the deformation and fracture of an alumina-alumina ceramic-matrix composite at elevated temperature using x-ray computed tomography

The deformation and fracture of a 0/90° Nextel 720 mullite fibre / alumina matrix ceramic-matrix composite material has been observed by in situ synchrotron x-ray computed micro-tomography at ambient temperature and at 1100 °C. A three-point loading configuration was used and samples were loaded monotonically until final fracture. Here, the flexural strength was found to be unaffected by temperature. 3D visualisation of the microstructure showed fracture occurred by propagation of internal cracks at stresses close to the flexural strength. Shear fractures propagated across fibre bundles that were oriented perpendicular to the flexural stress at both room temperature and 1100 °C. At the higher temperature, an additional failure mode of delamination was observed, that may arise from relaxation of thermal residual stresses and creep.

36 MATERIALS SCIENCE↗

HLE17: An Efficient Way To Predict Band Gaps of Complex Materials

The recently developed HLE 17 exchange-correlation functional, which is a local functional with high local exchange, is tested for determining the band gaps of various kinds of semiconductors and insulators, including metal organic frameworks (MOFs), covalent organic frameworks (COFs), perovskites, zeolites, and others. The calculated band gaps are compared to those calculated by more conventional functionals, in particular PBE, PBEsol, PBE+U, and HSE06. The HLE 17 functional is found to be more accurate PBE, PBEsol, and PBE+U and almost as accurate as the much more expensive HSE06. For the MOFs, HLE 17 is as accurate as HSE06 with almost 100 times less computational cost. As a result, the HLE 17 functional is found to be more accurate than the hybrid functional for covalent organic frameworks (COFs), β-GaSe, and BC 3 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A regression algorithm for accelerated lattice QCD that exploits sparse inference on the D-Wave quantum annealer

We propose a regression algorithm that utilizes a learned dictionary optimized for sparse inference on a D-Wave quantum annealer. In this regression algorithm, we concatenate the independent and dependent variables as a combined vector, and encode the high-order correlations between them into a dictionary optimized for sparse reconstruction. On a test dataset, the dependent variable is initialized to its average value and then a sparse reconstruction of the combined vector is obtained in which the dependent variable is typically shifted closer to its true value, as in a standard inpainting or denoising task. Here, a quantum annealer, which can presumably exploit a fully entangled initial state to better explore the complex energy landscape, is used to solve the highly non-convex sparse coding optimization problem. The regression algorithm is demonstrated for a lattice quantum chromodynamics simulation data using a D-Wave 2000Q quantum annealer and good prediction performance is achieved. The regression test is performed using six different values for the number of fully connected logical qubits, between 20 and 64. The scaling results indicate that a larger number of qubits gives better prediction accuracy.

97 MATHEMATICS AND COMPUTING↗