Search NASA⌕ Search

SEARCH · Search NASA

Results for “weakness analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Deuterium Retention in NSTX with Lithium Conditioning

High (approximate to 90%) deuterium retention was observed in NSTX gas balance measurements both with- and without lithiumization of the carbon plasma-facing components. The gas retained in ohmic discharges was measured by comparing the vessel pressure rise after a discharge to that of a gas-only pulse with the pumping valves closed. For neutral beam heated discharges the gas input and gas pumped by the NB cryopanels were tracked. The discharges were followed by outgassing of deuterium that reduced the retention. The relationship between retention and surface chemistry was explored with a new plasma-material interface probe connected to an in vacuo surface science station that exposed four material samples to the plasma. XPS and TDS analysis demonstrated that binding of D atoms in graphite is fundamentally changed by lithium - in particular atoms are weakly bonded in regions near lithium atoms bound to either oxygen or the carbon matrix. This is in contrast to the strong ionic bonding that occurs between D and pure Li. (C) 2010 Elsevier B.V. All rights reserved.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Broad area search for regions and objects of interest

A quad chart provides an overview on the on-going project 'Broad Area Search for Regions and Objects of Interest' funded by the DOE Office of Nonproliferation and Verification Research and Development. Specifically, the quad chart shows: (1) Project title 'Broad Area Search for Regions and Objects of Interest'; (2) PI and Co-investigators; (3) Concept Panel outlining the project's approach built upon front-end scale-space image analysis; (4) Technical Challenges posed by the project, such as robustness, non-conformities, disparate spatial configuration and weak correlation between presence of objects of interest and low-level description of the surrounding geospatial background; and (5) Planned Accomplishment.

47 OTHER INSTRUMENTATION↗

Spectroscopic data, spin-orbit functions, and revised analysis of strong perturbative interactions for the A {sup 1{Sigma}+} and b {sup 3{Pi}} states of RbCs

The current interest in producing ultracold RbCs molecules by optical excitation from weakly bound Feshbach resonances and stimulated decay to the absolute ground state requires detailed analyses of the intermediate excited states. In this study, we present two sets of experimental Fourier-transform spectroscopic data of the A {sup 1{Sigma}+}-b {sup 3{Pi}} complex. The A-b mixed vibrational levels are the most likely candidates to be intermediates in the molecular formation. The more recent and more accurate data set is from mixed A-b{yields}X transitions, while the second is derived in large part from (4) {sup 1{Sigma}+{yields}}A-b emission and extends to higher A-b energy levels. From a detailed analysis of the spectroscopic data we obtain term values which allow one to construct potentials and spin-orbit functions. Vibrational numbering of the A state has been raised by one quantum over a previous report [T. Bergeman et al., Phys. Rev. A 67, 050501 (2003)] while the numbering of the b state is established with a considerable degree of certainty with help of data on the {sup 85}Rb{sup 133}Cs and {sup 87}Rb{sup 133}Cs isotopomers. In addition, we have performed calculations of spin-orbit functions by two distinct methods. The fitted spin-orbit coupling matrix element between the two {Omega}{sup p}=0{sup +} states, A {sup 1{Sigma}+} and b {sup 3{Pi}}{sub 0+}, happens to agree rather well with the results from both of these methods, while for the diagonal b {sup 3{Pi}} state spin-orbit function, the fitted function agrees fairly well with that obtained by the other method.

74 ATOMIC AND MOLECULAR PHYSICS↗

Simulations, Modeling and Data Analysis of Parity Violating Electron Scattering Experiments

In the Standard Model (SM) of nuclear and particle physics, parity violation is incorporated through the representation of the weak interaction as a chiral gauge interaction. Only the left-handed components of particles and right-handed components of antiparticles participate in weak interactions in the Standard Model. This implies that parity is asymmetric for the weak interaction. Parity violating electron scattering (PVES) experiments are designed to probe the physics parameters related to the SM, with the possibility to discover physics beyond the SM (BSM) by measuring the parity violating asymmetry ¿¿¿ of longitudinally polarized electrons scattered off unpolarized targets with high precision. This dissertation will be focused on two PVES experiments, the next 208Pb Lead Radius Experiment (PREX-II), and the Measurement of a Lepton-Lepton Electroweak Reaction (MOLLER) experiment, as well as in some small sections, the Calcium Radius Experiment (CREX) and P2 experiment which are also PVES experiments). PREX-II and CREX experiments, performed in Hall A at the Thomas Jefferson National Accelerator Facility (Jefferson Lab), measured ¿¿¿ in the elastic scattering of longitudinally polarized electrons from 208Pb and 48Ca targets to provide a precise model independent determination of the neutron skin thickness of 208Pb and 48Ca nuclei, respectively. The MOLLER experiment, proposed to start in 2027 and also to be performed in Hall A at Jefferson Lab, is to measure ¿¿¿ of longitudinally polarized electrons scattered off unpolarized electrons (Møller scattering) to determine the weak charge of electrons ¿¿¿ and the weak mixing angle ¿¿ with high precision. As for the P2 experiment, which will be performed at the upcoming MESA accelerator in Mainz Germany, it is to measure the weak charge of proton ¿¿¿ using ¿¿¿ in the elastic electron-proton scattering of polarized electrons off unpolarized protons. The final results from the PREX-II experiment are presented as ¿¿¿=550±16 (¿¿¿¿)±8 (¿¿¿¿) parts-per-billion (ppb). Combining the PREX-I and PREX-II results, the neutron skin thickness from PREX experiments is determined as ¿¿-¿¿=0.283±0.071 ¿¿ in 208Pb. This thesis lists the software and computational contribution of the author to these PVES experiments, including writing scripts and software to help with the PREX-II/CREX experiments, analyzing data to provide useful information and systematic uncertainty for the PREX-II experiment, modeling and simulations for the MOLLER, and providing an alternative design of an electronic equipment for the P2 experiment.

Chen, Yufan↗

Simulations, Modeling and Data Analysis of Parity Violating Electron Scattering Experiments

In the Standard Model (SM) of nuclear and particle physics, parity violation is incorporated through the representation of the weak interaction as a chiral gauge interaction. Only the left-handed components of particles and right-handed components of antiparticles participate in weak interactions in the Standard Model. This implies that parity is asymmetric for the weak interaction. Parity violating electron scattering (PVES) experiments are designed to probe the physics parameters related to the SM, with the possibility to discover physics beyond the SM (BSM) by measuring the parity violating asymmetry ¿¿¿ of longitudinally polarized electrons scattered off unpolarized targets with high precision. This dissertation will be focused on two PVES experiments, the next 208Pb Lead Radius Experiment (PREX-II), and the Measurement of a Lepton-Lepton Electroweak Reaction (MOLLER) experiment, as well as in some small sections, the Calcium Radius Experiment (CREX) and P2 experiment which are also PVES experiments). PREX-II and CREX experiments, performed in Hall A at the Thomas Jefferson National Accelerator Facility (Jefferson Lab), measured ¿¿¿ in the elastic scattering of longitudinally polarized electrons from 208Pb and 48Ca targets to provide a precise model independent determination of the neutron skin thickness of 208Pb and 48Ca nuclei, respectively. The MOLLER experiment, proposed to start in 2027 and also to be performed in Hall A at Jefferson Lab, is to measure ¿¿¿ of longitudinally polarized electrons scattered off unpolarized electrons (Møller scattering) to determine the weak charge of electrons ¿¿¿ and the weak mixing angle ¿¿ with high precision. As for the P2 experiment, which will be performed at the upcoming MESA accelerator in Mainz Germany, it is to measure the weak charge of proton ¿¿¿ using ¿¿¿ in the elastic electron-proton scattering of polarized electrons off unpolarized protons. The final results from the PREX-II experiment are presented as ¿¿¿=550±16 (¿¿¿¿)±8 (¿¿¿¿) parts-per-billion (ppb). Combining the PREX-I and PREX-II results, the neutron skin thickness from PREX experiments is determined as ¿¿-¿¿=0.283±0.071 ¿¿ in 208Pb. This thesis lists the software and computational contribution of the author to these PVES experiments, including writing scripts and software to help with the PREX-II/CREX experiments, analyzing data to provide useful information and systematic uncertainty for the PREX-II experiment, modeling and simulations for the MOLLER, and providing an alternative design of an electronic equipment for the P2 experiment.

Chen, Yufan↗

Influence of metallic contaminants on the electrochemical and thermal behavior of Li-ion electrodes

Emerging nondestructive (direct) recycling techniques for lithium-ion batteries may introduce metallic impurities into recycled electrodes. In the present work, the impact of such nonionic contaminants on the practical performance of both anode and cathode materials is evaluated using a synergistic combination of electrochemical and thermal analysis. The impurities under study have been selected through evaluation of industrially shredded batteries, and include Fe0, Al0, Mg0, Cu0, and Si0. The electrochemical behavior of materials containing each individual contaminant at either the anode or the cathode is evaluated in both half-cell and full-cell format. Further, the first-cycle thermal signatures of full cells are used to validate and complement electrochemical signatures, and the two techniques are used in conjunction to suggest distinct mechanisms of electrochemical reactivity for the various impurities. At the anode, metallic contaminants are found to disrupt performance through direct reaction with Li and may serve as weak catalysts to accelerate electrolyte degradation. At the cathode, metallic contaminants show evidence of crossover during formation cycling to disrupt SEI formation. We suggest that coupled electrochemical and thermal analysis may be used to both identify the presence of contaminants and to elucidate specific mechanisms of reactivity for metallic impurities under anodic and cathodic conditions.

Contaminant↗

Machine Learning-Assisted Recovery of Delicate Kinetic Information from Transient Reactor Experiments

Identifying active sites and their roles in chemical reaction steps remains a vital challenge in heterogeneous catalysis. Transient experiments offer a unique way to probe active sites and distinguish subtle kinetic features. Although physics-based analysis methods may be well-developed, they can be highly susceptible to experimental noise, and smoothing methods may erase or even distort important features; a smooth curve is not always the best curve. We demonstrate a new workflow for the direct interpretation of intrinsic kinetic information from exit flux curves measured in transient reactor experiments. This workflow contains three artificial neural networks (ANNs), including a noise reducer, a concentration predictor, and a rate predictor to analyze experimental data, followed by the virtual TAP (VTAP) physics-based reactor model and density functional theory (DFT) calculations of adsorption energies on specific sites. We use this workflow to analyze the data from experiments titrating Pt/Al 2 O 3 and Pt/SiO 2 catalysts with carbon monoxide (CO) in the temporal analysis of products (TAP) reactor. Our workflow separates the time-evolving chemical reaction and mass transfer information contained in the TAP pulse response. The existence of strong- and weak-binding sites on the Pt/Al 2 O 3 catalyst is observed in the catalyst titration experiment in the transient reactor. The structures of the strong- and weak-binding sites are then identified by using DFT calculations. We find that the Pt/SiO 2 catalyst has only strong-binding sites, which aligns with the inactive support effect of SiO 2 . We demonstrate how machine learning methods provide unique insights with high-resolution data analysis that cannot be achieved by using state-of-the-art physics-based methods.

Adsorption↗

Extracting the Spectral Function of the Cuprates By a Full Two-Dimensional Analysis: Angle-Resolved Photoemission Spectra of Bi(2)Sr(2)CuO(6)

Recently, angle-resolved photoemission spectroscopy (ARPES) has revealed a dispersion anomaly at high binding energy near 0.3--0.5eV in various families of the high-temperature superconductors. For further studies of this anomaly, we present a new two-dimensional fitting scheme and apply it to high-statistics ARPES data of the strongly overdoped Bi{sub 2}Sr{sub 2}CuO{sub 6} cuprate superconductor. The procedure allows us to extract the self-energy in an extended energy and momentum range. It is found that the spectral function of Bi{sub 2}Sr{sub 2}CuO{sub 6} can be parametrized using a small set of tight-binding parameters and a weakly momentum-dependent self-energy up to 0.7eV in binding energy and over the entire first Brillouin zone. Moreover, the analysis gives an estimate of the momentum dependence of the matrix element, a quantity, which is often neglected in ARPES analyses.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Detonation mode and frequency analysis under high loss conditions for stoichiometric propane-oxygen

In this paper, the propagation characteristics of galloping detonations were quantified with a high-time-resolution velocity diagnostic. Combustion waves were initiated in 30-m lengths of 4.1-mm inner diameter transparent tubing filled with stoichiometric propane–oxygen mixtures. Chemiluminescence from the resulting waves was imaged to determine the luminous wave front position and velocity every 83.3 μ. As the mixture initial pressure was decreased from 20 to 7 kPa, the wave was observed to become increasingly unsteady and transition from steady detonation to a galloping detonation. While wave velocities averaged over the full tube length smoothly decreased with initial pressure down to half of the Chapman–Jouguet detonation velocity (D CJ ) at the quenching limit, the actual propagation mechanism was seen to be a galloping wave with a cycle period of approximately 1.0 ms, corresponding to a cycle length of 1.3–2.0 m or 317–488 tube diameters depending on the average wave speed. The long test section length of 7300 tube diameters allowed observation of up to 20 galloping cycles, allowing for statistical analysis of the wave dynamics. In the galloping regime, a bimodal velocity distribution was observed with peaks centered near 0.4 D CJ and 0.95 D CJ . Decreasing initial pressure increasingly favored the low velocity mode. Galloping frequencies ranged from 0.8 to 1.0 kHz and were insensitive to initial mixture pressure. Wave deflagration-to-detonation transition and detonation failure trajectories were found to be repeatable in a given test and also across different initial mixture pressures. The temporal duration of wave dwell at the low and high velocity modes during galloping was also quantified. It was found that the mean wave dwell duration in the low velocity mode was a weak function of initial mixture pressure, while the mean dwell time in the high velocity mode depended exponentially on initial mixture pressure. Analysis of the velocity histories using dynamical systems ideas demonstrated trajectories that varied from stable to limit cycles to aperiodic motion with decreasing initial pressure. Finally, the results indicate that galloping detonation is a persistent phenomenon at long tube lengths.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dark Energy Survey Year 3 results: Cosmology from combined galaxy clustering and lensing validation on cosmological simulations

In this work, we present a validation of the Dark Energy Survey Year 3 (DES Y3) 3×2-point analysis choices by testing them on Buzzard2.0, a new suite of cosmological simulations that is tailored for the testing and validation of combined galaxy clustering and weak-lensing analyses. We show that the buzzard2.0 simulations accurately reproduce many important aspects of the DES Y3 data, including photometric redshift and magnitude distributions, and the relevant set of two-point clustering and weak-lensing statistics. We then show that our model for the 3×2-point data vector is accurate enough to recover the true cosmology in simulated surveys assuming the true redshift distributions for our source and lens samples, demonstrating robustness to uncertainties in the modeling of the nonlinear matter power spectrum, nonlinear galaxy bias, and higher-order lensing corrections. Additionally, we demonstrate for the first time that our photometric redshift calibration methodology, including information from photometry, spectroscopy, clustering cross-correlations, and galaxy–galaxy lensing ratios, is accurate enough to recover the true cosmology in simulated surveys in the presence of realistic photometric redshift uncertainties.

79 ASTRONOMY AND ASTROPHYSICS↗

Turbulent Transport of Trapped-Electron Modes in Collisionless Plasmas

Global gyrokinetic particle simulations of collisionless trapped-electron mode turbulence in toroidal plasmas find that electron heat transport exhibits a device size scaling with a gradual transition from Bohm to gyro-Bohm scaling. A comprehensive analysis of spatial and temporal scales shows that the turbulence eddies are predominantly microscopic because of zonal flow shearing, but the presence of mesoscale structures drives a nondiffusive component in the electron heat flux due to the weak nonlinear detuning of the precessional resonance that excites the linear instability.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Weak Value Theory

I show that the weak value theory is useful from the viewpoints of the experimentally verifiability, consistency, capacity for explanation as to many quantum paradoxes, and practical advantages. As an example, the initial state in the Hardy paradox can be experimentally verified using the weak value via the weak measurement.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Coronary circulation: Pressure/flow parameters for assessment of ischemic heart disease

Both invasive and non-invasive parameters have been reported for assessment of the physiological status of the coronary circulation. Fractional flow reserve and coronary (or myocardial) flow reserve may be obtained by invasive or non-invasive means. These metrics of coronary stenosis severity have achieved wide clinical acceptance for guiding revascularization decisions and risk stratification. Other indices are obtained invasively (e.g., instantaneous wave-free ratio, iFR; hyperemic stenosis resistance) or non-invasively (e.g., PET absolute myocardial blood flow (mL/min/g)) and have been used for the same purposes. Both iFR, and whole-cycle distal coronary to aortic mean pressure (Pd/Pa) are measured under basal condition and used for assessment of hemodynamic stenosis severity as is index of basal stenosis resistance (BSR). These metrics typically are dichotomized at an empirically derived cut point into “normal” and “abnormal” categories for purposes of clinical decision making and data analysis. Once dichotomized the indices do not always point in the same direction and so confusion may arise. This review, therefore, will present basic principles relevant to understanding commonly employed metrics of the physiological status of the coronary circulation, potential strengths and weaknesses, and hopefully an improved appreciation of the clinical information provided by each.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Validating the C i 5052.17 Å/Mg ii 4481 Å Equivalent Width Ratio as a Diagnostic for F-type Lambda Boo Stars

The Lambda Boo-type stars are chemically peculiar stars with deficiencies of iron-peak elements but near-solar C, N, O, and S abundances. Since the prototype Lambda Boötis was first reported as peculiar, this group has been expanded from a small group of early A-type stars to a larger group of late B to early F-type dwarfs. Although a detailed abundance analysis that supports the Lambda Boo-like abundance pattern is the definitive confirmation of this Lambda Boo characteristic, the rapid rotation of many Lambda Boo stars generally limits how much detail can be derived from an abundance analysis. Traditionally, Lambda Boo candidates have been classified by visually examining the difference between their spectra and spectra of standard stars. Therefore, some ambiguity remains especially for mild or borderline Lambda Boo stars. This is the third paper in a series that establishes a straightforward yet reliable way to identify Lambda Boo-type stars. In previous papers, we identified line equivalent width (EW) ratios in the ultraviolet and visible regions that can distinguish Lambda Boo stars from other metal-weak stars. In this paper, we apply the visible line EW ratio diagnostic to 25 Lambda Boo candidates and carry out a detailed abundance analysis of HD 81290, an F2 star with a C i/Mg ii EW ratio in the range expected for Lambda Boo-type stars. Our elemental abundance analysis results confirm HD 81290's Lambda Boo membership and demonstrate the utility of our EW ratio as a diagnostic for cooler F-type Lambda Boo stars.

79 ASTRONOMY AND ASTROPHYSICS↗

3D Relativistic MHD Simulations of Magnetized Spine-Sheath Relativistic Jets

We have performed numerical simulations of weakly and strongly magnetized relativistic jets embedded in a weakly and strongly magnetized stationary or mildly relativistic (0.5c) sheath using the RAISHIN code. In the numerical simulations a jet with Lorentz factor gamma=2.5 is precessed to break the initial equilibrium configuration. Results of the numerical simulations are compared to theoretical predictions from a normal mode-analysis of the linearized RMHD equations describing a uniform axially magnetized cylindrical relativistic jet embedded in a uniform axially magnetized moving sheath. The prediction of increased stability of a weakly-magnetized system with mildly relativistic sheath flow to Kelvin-Helmholtz instabilities and the stabilization of a strongly-magnetized system with mildly relativistic sheath flow is confirmed by the numerical simulations.

Mizuno, Yosuke↗

3D RMHD Simulations of Magnetized Spine-Sheath Relativistic Jets

We have performed numerical simulations of weakly and strongly magnetized relativistic jets embedded in a weakly and strongly magnetized stationary or mildly relativistic (0.5c) sheath flow using the RAISHIN code. In the numerical simulations a jet with Lorentz factor gamma=2.5 is processed to break the initial equilibrium configuration. Results of the numerical simulations are compared to theoretical predictions from a normal mode analysis of the linearized RMHD equations describing a uniform axially magnetized cylindrical relativistic jet embedded in a uniform axially magnetized sheath flow. The prediction of increased stability of a weakly-magnetized system with mildly relativistic sheath flow to Kelvin-Helmholtz instabilities and the stabilization of a strongly magnetized system with mildly relativistic sheath flow is confirmed by the numerical simulations.

Mizuno, Yosuke↗

3D RMHD Simulations of Magnetized Spine-sheath Relativistic Jets

We have performed numerical simulations of weakly and strongly magnetized relativistic jets embedded in a weakly and strongly magnetized stationary or mildly relativistic'(0.5c) sheath flow using the RAISHIN code. In the numerical simulations a jet with Lorentz factor gamma=2.5 is processed to break the initial equilibrium configuration. Results of the numerical simulations are compared to theoretical predictions from a normal mode analysis of the linearized RMHD equations describing a uniform axially magnetized cylindrical relativistic jet embedded in a uniform axially magnetized sheath flow. The prediction of increased stability of a weakly-magnetized system with mildly relativistic sheath flow to Kelvin-Helmholtz instabilities and the stabilization of a strongly-magnetized system with mildly relativistic sheath flow is confirmed by the numerical simulations.

Mizuno, Yosuke↗

Two lead(II) 2,4-dioxo-1,2,3,4-tetrahydropyrimidine-5-carboxylate complexes exhibiting different topologies and fluorescent properties

The reactions of PbCl{sub 2} with 2,4-dioxo-1,2,3,4-tetrahydropyrimidine-5-carboxylic acid (H{sub 3}iso) gave two complexes [Pb(H{sub 2}iso){sub 2}(H{sub 2}O)]{sub n} (1) and [Pb(Hiso)(H{sub 2}O)]{sub n} (2), which were characterized by IR spectroscopy, elemental analysis, thermogravimetric analysis, powder X-ray diffraction and single crystal X-ray diffraction analysis. The two complexes display different topologies. 1 shows a three-dimensional framework with the Schlaefli symbol (4.8{sup 5})(4.8{sup 2}) no matter if the weak Pb-O bonds are included or not. However, 2 presents a 3,3-connected two-dimensional sheet with the Schlaefli symbol (4.8{sup 2})(4.8{sup 2}) based on the calculation of only the normal Pb-O bonds and a 5,5-connected 3D network with the Schlaefli symbol (4{sup 15}.6{sup 4})(4{sup 4}.6{sup 8}.8{sup 2}) when the weak Pb-O bonds are also included. The fluorescent studies reveal an emission attributed to intraligand emission for 1 and an emission assigned to LMCT for 2. -- Graphical abstract: The reactions of PbCl{sub 2} with 2,4-dioxo-1,2,3,4-tetrahydropyrimidine-5-carboxylic acid (H{sub 3}iso) gave two complexes [Pb(H{sub 2}iso){sub 2}(H{sub 2}O)]{sub n} (1) and [Pb(Hiso)(H{sub 2}O)]{sub n} (2), which display different topologies and fluorescent properties. Display Omitted Highlights: {yields} Two Pb(II) complexes were prepared from the reactions of PbCl{sub 2} with the same ligand. {yields} The two title complexes display different topologies. {yields} Both normal and weak Pb-O bonds are discussed in the manuscript.{yields} The title two complexes show different fluorescent properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗