Search NASA⌕ Search

SEARCH · Search NASA

Results for “Biomass Utilization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

Monitoring the Vernal Advancement and Retrogradation (Green Wave Effect) of Natural Vegetation

The author has identified the following significant results. The Great Plains Corridor rangeland project successfully utilized natural vegetation systems as phenological indicators of seasonal development and climatic effects upon regional growth conditions. An effective method was developed for quantitative measurement of vegetation conditions, including green biomass estimates, recorded in bands 5 and 6, corrected for sun angle, were used to compute a ratio parameter (TV16) which is shown to be highly correlated with green biomass and vegatation moisture content. Analyses results of ERTS-1 digital data and correlated ground data are summarized. Attention was given to analyzing weather influences and test site variables on vegetation condition measurements with ERTS-1 data.

Rouse, J. W., Jr.↗

Computational Design of Lignin Depolymerization Catalysts

Lignin is a major component of plant cell walls that is typically underutilized in selective conversion strategies for renewable fuels and chemicals. The mechanisms by which thermal and catalytic treatments deconstruct lignin remain elusive, for which quantum mechanical calculations can offer fundamental insights. In this work, a computational approach has been used to elucidate the reductive deconstruction pathway of a ruthenium-catalyzed system. Transition states have been computed to determine the rate-limiting steps for a catalyst that cleaves arylether linkages. Our calculations are supported by experimental synthesis and kinetic and thermodynamic measurements of the deconstruction of model lignin dimers by a ruthenium catalyst with the ultimate objective of designing new catalysts to eventually utilize lignin in biorefineries.

09 BIOMASS FUELS↗

Butanol tolerance in microorganisms

Provided herein are recombinant yeast host cells and methods for their use for production of fermentation products from a pyruvate utilizing pathway. Yeast host cells provided herein comprise reduced pyruvate decarboxylase activity and modified adenylate cyclase activity. In embodiments, yeast host cells provided herein comprise resistance to butanol and increased biomass production.

59 BASIC BIOLOGICAL SCIENCES↗

Woody Feedstock 2018 State of Technology Report

The U.S. Department of Energy promotes production of advanced liquid transportation fuels from lignocellulosic biomass by funding fundamental and applied research that advances the state of technology (SOT). As part of its involvement with this overall mission, Idaho National Laboratory completes annual SOT reports for biomass feedstock logistics. The purpose of the SOTs are to provide the status of feedstock supply system technology development for biomass to biofuels, based on actual data and experimental results relative to technical targets and cost goals from specific design cases. The 2018 Woody Feedstock SOT has been separated into three individual thermochemical conversion pathways that utilize woody feedstocks: indirect liquefaction (IDL), catalytic fast pyrolysis (CFP), and algal-blend hydrothermal liquefaction (AHTL). The 2018 delivered cost for the feedstocks were found to be ${$}$63.76/dry ton, ${$}$87.82/dry ton and ${$}$70.31/dry ton, respectively (2016${$}$). In addition to the SOT analyses, projections for each pathway have been made for the year 2022. In 2022, the feedstock costs for IDL and AHTL are estimated to remain constant over the period, while the feedstock cost for CFP is projected to be reduced to ${$}$70.31/dry ton due to advancements in air classification and leaching, that will allow forest residue to be sufficiently cleaned to match or exceed the quality of clean pine.

09 BIOMASS FUELS↗

Adsorption characteristics of siloxanes in landfill gas by the adsorption equilibrium test

Highlights: • Equilibrium test was attempted to evaluate adsorption characteristics of siloxane. • L2 had higher removal efficiency in carbon compared to noncarbon adsorbents. • Total adsorption capacity of siloxane was 300 mg/g by coal activated carbon. • Adsorption characteristics rely on size of siloxane molecule and adsorbent pore. • Conversion of siloxane was caused by adsorption of noncarbon adsorbents. - Abstract: Due to the increase in energy cost by constantly high oil prices and the obligation to reduce greenhouse effect gases, landfill gas is frequently used as an alternative energy source for producing heat and electricity. Most of landfill gas utility facilities, however, are experiencing problems controlling siloxanes from landfill gas as their catalytic oxidizers are becoming fouled by silicon dioxide dust. To evaluate adsorption characteristics of siloxanes, an adsorption equilibrium test was conducted and parameters in the Freundlich and Langmuir isotherms were analyzed. Coconut activated carbon (CA1), coal activated carbon (CA2), impregnated activated carbon (CA3), silicagel (NCA1), and activated alumina (NCA2) were used for the adsorption of the mixed siloxane which contained hexamethyldisiloxane (L2), octamethylcyclotetrasiloxane (D4), and decamethylcyclopentasiloxane (D5). L2 had higher removal efficiency in noncarbon adsorbents compared to carbon adsorbents. The application of Langmuir and Freundlich adsorption isotherm demonstrated that coconut based CA1 and CA3 provided higher adsorption capacity on L2. And CA2 and NCA1 provided higher adsorption capacity on D4 and D5. Based on the experimental results, L2, D4, and D5 were converted by adsorption and desorption in noncarbon adsorbents. Adsorption affinity of siloxane is considered to be affect by the pore size distribution of the adsorbents and by the molecular size of each siloxane.

09 BIOMASS FUELS↗

A decomposition approach based on meta-heuristics and exact methods for solving a two-stage stochastic biofuel hub-and-spoke network problem

An alternative to the production of fossil transportation fuels is the production of biofuels, particularly, bioethanol. One of the main opportunity areas is the reduction in the overall cost of biofuel. An approach to reduce this cost is to design and implement a supply chain (SC) that considers the quality-related properties of the biomass as well as the economies of scale to minimize the logistics and quality-related costs. This problem is formulated as a hub location problem, which has been classified as an NP-hard problem, thus, meta-heuristics are a suitable approach to solve this problem. We propose a hybrid meta-heuristic solution procedure to solve large-scale instances of a two-stage stochastic biomass-to-biorefinery hub-and-spoke network problem. This solution procedure is proposed to support the large-scale production and distribution of bioethanol by considering the variability in its moisture and ash contents. The hybrid method utilizes a simulated annealing-simplex method to find an initial solution and a tabu search-simplex method to improve the solution. Numerical experimentation was performed on a realistic case study in Texas. The findings demonstrate that the hybrid procedure outperforms the standard L-shaped (LS) method. The meta-heuristic combining simulated annealing and tabu search with the simplex method (SATS-SM) achieved 2.48% lower costs and required 96.57% less time, on average, when compared to the results from using the LS.

09 BIOMASS FUELS↗

Sustainable Biofuels Development Center

The mission of the Sustainable Bioenergy Development Center (SBDC) is to enhance the capability of America’s bioenergy industry to produce transportation fuels and chemical feedstocks on a large scale, with significant energy yields, at competitive cost, through sustainable production techniques. Research within the SBDC is organized in five areas: (1) Development of Sustainable Crops and Agricultural Strategies, (2) Improvement of Biomass Processing Technologies, (3) Biofuel Characterization and Engine Adaptation, (4) Production of Byproducts for Sustainable Biorefining, and (5) Sustainability Assessment, including evaluation of the ecosystem/climate change implication of center research and evaluation of the policy implications of widespread production and utilization of bioenergy. The overall goal of this project is to develop new sustainable bioenergy-related technologies. To achieve that goal, three specific activities were supported with DOE funds: bioenergy-related research initiation projects, bioenergy research and education via support of undergraduate and graduate students, and Research Support Activities (equipment purchases, travel to attend bioenergy conferences, and seminars). Numerous research findings in diverse fields related to bioenergy were produced from these activities and are summarized in this report.

09 BIOMASS FUELS↗

High Performance Polymers from Biomass

The objective of this study was to demonstrate feasibility and scale-up of cellulosic feedstocks for the production of a commercial C6 lactone. Visolis, Inc. has developed a fermentation platform for production of the lactone at high titers and yields. The lactone is used in high-end cosmetics industry and also serves as a valuable intermediate for production of biopolymers and biofuels. Strains employed by Visolis are capable of metabolizing both glucose and xylose, enabling full utilization of cellulosic hydrolysates as feedstock. Visolis and ABPDU conducted a 2L proof-of-concept fermentation campaign followed by a 50L scale-up campaign.

09 BIOMASS FUELS↗

Promoting Utilization of Saccharum spp. Genetic Resources through Genetic Diversity Analysis and Core Collection Construction

Sugarcane (Saccharum spp.) and other members of Saccharum spp. are attractive biofuel feedstocks. One of the two World Collections of Sugarcane and Related Grasses (WCSRG) is in Miami, FL. This WCSRG has 1002 accessions, presumably with valuable alleles for biomass, other important agronomic traits, and stress resistance. However, the WCSRG has not been fully exploited by breeders due to its lack of characterization and unmanageable population. In order to optimize the use of this genetic resource, we aim to 1) genotypically evaluate all the 1002 accessions to understand its genetic diversity and population structure and 2) form a core collection, which captures most of the genetic diversity in the WCSRG. We screened 36 microsatellite markers on 1002 genotypes and recorded 209 alleles. Genetic diversity of the WCSRG ranged from 0 to 0.5 with an average of 0.304. The population structure analysis and principal coordinate analysis revealed three clusters with all S. spontaneum in one cluster, S. officinarum and S. hybrids in the second cluster and mostly non-Saccharum spp. in the third cluster. A core collection of 300 accessions was identified which captured the maximum genetic diversity of the entire WCSRG which can be further exploited for sugarcane and energy cane breeding. Sugarcane and energy cane breeders can effectively utilize this core collection for cultivar improvement. Further, the core collection can provide resources for forming an association panel to evaluate the traits of agronomic and commercial importance.

59 BASIC BIOLOGICAL SCIENCES↗

Production of C5 Hydrocarbons from Water Biomass

The objective of this study was to demonstrate feasibility and scale-up of cellulosic feedstocks for the production of a commercial C 6 lactone. Visolis, Inc. has developed a fermentation platform for production of the lactone at high titers and yields. The lactone is used in high-end cosmetics industry and also serves as a valuable intermediate for production of biopolymers and biofuels. Strains employed by Visolis are capable of metabolizing both glucose and xylose, enabling full utilization of cellulosic hydrolysates as feedstock. Visolis and ABPDU conducted a 2L proof-of-concept fermentation campaign followed by a 50L scale-up campaign.

09 BIOMASS FUELS↗

Techno-Economic Analysis and Life Cycle Assessment for Guiding Bioenergy Pathway Development

The Center for Bioenergy Innovation (CBI) is a bioenergy research center recently launched by the U.S. Department of Energy Office of Science's Biological and Environmental Research program. CBI's objective is to enable innovations across the bioenergy supply chain through development of poplar and switchgrass phenotypes, microorganisms for consolidated bio-processing (CBP), in which biomass fermentation and conversion is accomplished in a single unit operation, and lignin valorization processes. In addition to basic science, CBI's activities involve the application of techno-economic analysis (TEA) and life cycle assessment (LCA) to the bioenergy pathways under study. TEA and LCA is used to quantify the impacts that research and development breakthroughs have on the economic viability and sustainability of a bioenergy pathway, and to identify drivers for reducing costs and improving sustainability through targeted research efforts. Combining TEA and LCA allows for understanding the economic and sustainability benefits and trade-offs of these integrated bioenergy systems. The focus of this presentation is a parameterized, integrated TEA-LCA model, which will be discussed along with an application to bioenergy pathways currently under study. The model combines data and information developed by CBI researchers into a superstructure of potential bioenergy pathways and their life cycles. Model parameters include feedstock species and phenotype, farming, harvesting, storage and transportation practices, and the microbes used for biomass conversion and lignin valorization, among others. The parameterized TEA-LCA model allows for the rapid quantification of pathway economic and sustainability metrics such as minimum fuel selling price, payback period, fossil fuel consumption and net greenhouse gas emissions. To demonstrate the model, economic and sustainability metrics for a bioenergy pathway utilizing CBP will be quantified and compared to the same metrics for a conventional bioenergy pathway. Results of the comparison will be used to identify and prioritize high-impact research areas within the CBP pathway. fermentation and conversion is accomplished in a single unit operation, and lignin valorization processes. In addition to basic science, CBI's activities involve the application of techno-economic analysis (TEA) and life cycle assessment (LCA) to the bioenergy pathways under study. TEA and LCA is used to quantify the impacts that research and development breakthroughs have on the economic viability and sustainability of a bioenergy pathway, and to identify drivers for reducing costs and improving sustainability through targeted research efforts. Combining TEA and LCA allows for understanding the economic and sustainability benefits and trade-offs of these integrated bioenergy systems. The focus of this presentation is a parameterized, integrated TEA-LCA model, which will be discussed along with an application to bioenergy pathways currently under study. The model combines data and information developed by CBI researchers into a superstructure of potential bioenergy pathways and their life cycles. Model parameters include feedstock species and phenotype, farming, harvesting, storage and transportation practices, and the microbes used for biomass conversion and lignin valorization, among others. The parameterized TEA-LCA model allows for the rapid quantification of pathway economic and sustainability metrics such as minimum fuel selling price, payback period, fossil fuel consumption and net greenhouse gas emissions. To demonstrate the model, economic and sustainability metrics for a bioenergy pathway utilizing CBP will be quantified and compared to the same metrics for a conventional bioenergy pathway. Results of the comparison will be used to identify and prioritize high-impact research areas within the CBP pathway.

09 BIOMASS FUELS↗

The evolution of the GAL actose utilization pathway in budding yeasts

The Leloir galactose utilization or GAL pathway of budding yeasts, including that of the baker’s yeast Saccharomyces cerevisiae and the opportunistic human pathogen Candida albicans, breaks down the sugar galactose for energy and biomass production. Here, the GAL pathway has long served as a model system for understanding how eukaryotic metabolic pathways, including their modes of regulation, evolve. More recently, the physical linkage of the structural genes GAL1, GAL7, and GAL10 in diverse budding yeast genomes has been used as a model for understanding the evolution of gene clustering. In this review, we summarize exciting recent work on three different aspects of this iconic pathway’s evolution: gene cluster organization, GAL gene regulation, and the population genetics of the GAL pathway.

59 BASIC BIOLOGICAL SCIENCES↗

Competing effects of soil fertility and toxicity on tropical greening

Tropical forests are expected to green up with increasing atmospheric CO 2 concentrations, but primary productivity may be limited by soil nutrient availability. However, rarely have canopy-scale measurements been assessed against soil measurements in the tropics. Here, we sought to assess remotely sensed canopy greenness against steep soil nutrient gradients across 50 1-ha mature forest plots in Panama. Contrary to expectations, increases in in situ extractable soil phosphorus (P) and base cations (K, Mg) corresponded to declines in remotely sensed mean annual canopy greenness (r 2 = 0.77– 0.85; p < 0.1), controlling for precipitation. The reason for this inverse relationship appears to be that litterfall also increased with increasing soil P and cation availability (r 2 = 0.88–0.98; p < 0.1), resulting in a decline in greenness with increasing annual litterfall (r 2 = 0.94; p < 0.1). As such, greater soil nutrient availability corresponded to greater leaf turnover, resulting in decreased greenness. However, these decreases in greenness with increasing soil P and cations were countered by increases in greenness with increasing soil nitrogen (N) (r 2 = 0.14; p < 0.1), which had no significant relationship with litterfall, likely reflecting a direct effect of soil N on leaf chlorophyll content, but not on litterfall rates. In addition, greenness increased with extractable soil aluminum (Al) (r 2 = 0.97; p < 0.1), but Al had no significant relationship with litterfall, suggesting a physiological adaptation of plants to high levels of toxic metals. Thus, spatial gradients in canopy greenness are not necessarily positive indicators of soil nutrient scarcity. Using a novel remote sensing index of canopy greenness limitation, we assessed how observed greenness compares with potential greenness. We found a strong relationship with soil N only (r 2 = 0.65; p < 0.1), suggesting that tropical canopy greenness in Panama is predominantly limited by soil N, even if plant productivity (e.g., litterfall) responds to rock-derived nutrients. Moreover, greenness limitation was also significantly correlated with fine root biomass and soil carbon stocks (r 2 = 0.62–0.71; p < 0.1), suggesting a feedback from soil N to canopy greenness to soil carbon storage. Altogether, these data point to the potential utility of a remote sensing product for assessing belowground properties in tropical ecosystems.

54 ENVIRONMENTAL SCIENCES↗

CO2-Based Manufacturing System for Recombinant Protein Production

Space biomanufacturing is a potential In Situ Resource Utilization (ISRU) strategy to provide critical consumables and products while minimizing the launched mass for long-duration, deep space missions. On Earth, the primary biological conversion of CO 2 to biomass is through photosynthesis, and sugars from photosynthetic organisms are used as feedstocks for microbial biomanufacturing. The efficiency of non-biological reduction of CO 2 to organic molecules, such as acetate or ethanol, has greatly increased in recent years. We are designing a biomanufacturing system to rely on electrochemical CO 2 conversion products for carbon substrates to support microbial growth and production of recombinant proteins. The preliminary design includes a gas-permeable membrane bioreactor with dry salts that are rehydrated and mixed with the carbon source to support growth of bacteria or yeast. The system architecture has a partially automated bioprocessing system to concentrate biomass and purify recombinant protein. This system is designed to operate semi-autonomously with minimal crew intervention. The specific use-case scenario is to produce a thermal stable carbonic anhydrase to increase the efficiency of a proposed liquid amine CO 2 removal subsystem of an environmental control and life-support system (ECLSS) on Mars.

Biomanufacturing↗

Development of a Space Compatible Biomanufacturing System

Space biomanufacturing is a potential In Situ Resource Utilization (ISRU) strategy to provide critical consumables and products while minimizing the launched mass for long-duration, deep space missions. On Earth, the primary biological conversion of CO 2 to biomass is through photosynthesis, and sugars from photosynthetic organisms are used as feedstocks for microbial biomanufacturing. The efficiency of non-biological reduction of CO 2 to organic molecules, such as acetate or ethanol, has greatly increased in recent years. We are designing a biomanufacturing system to rely on electrochemical CO 2 conversion products for carbon substrates to support microbial growth and production of recombinant proteins. The preliminary design includes a gas-permeable membrane bioreactor with dry salts that are rehydrated and mixed with the carbon source to support growth of bacteria or yeast. The system architecture has a partially automated bioprocessing system to concentrate biomass and purify recombinant protein. This system is designed to operate semi-autonomously with minimal crew intervention. The specific use-case scenario is to produce a thermal stable carbonic anhydrase to increase the efficiency of a proposed liquid amine CO 2 removal subsystem of an environmental control and life-support system (ECLSS) on Mars.

Recombinant↗

Muconic acid production from algae hydrolysate as a high-value co-product of an algae biorefinery

Muconic acid is an attractive bio-derived product because it can be easily converted to adipic acid, a high-value and high-volume monomer used in the production of nylon and other valuable consumer plastics. As such, production of muconic acid from algae hydrolysate was explored to expand the suite of products available from algal biomass. Here we have established initial performance parameters and have shown that the range of substrates present in algae hydrolysate that are consumed by Pseudomonas putida includes at least glucose, mannose, glycerol, acetic acid, and lactic acid. We achieved complete utilization of these major carbon sources found in Scenedesmus acutus hydrolysate with a maximum muconic acid productivity of 0.25 g/L h. Final titer was 13.0 g/L (27% molar process yield) at approximately 50 h. In addition, algae hydrolysate does not require any additional nutrients to achieve these performance metrics. Techno-economic analysis showed the potential to support up to 150 algal biorefineries at this yield with significant greenhouse gas reductions.

09 BIOMASS FUELS↗