Search NASA⌕ Search

SEARCH · Search NASA

Results for “Design Parameters”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

Optimal Methanol Production via Sorption-Enhanced Reaction Process

To counter the equilibrium limitations in traditional methanol production from synthesis gas, a periodic and sorption-enhanced methanol synthesis process (SE-MeOH) with in situ removal of water byproduct is designed and optimized. A generalized reaction–adsorption modeling and simulation framework is coupled with a simulation-based constrained gray-box optimizer to obtain the optimal cycle configuration, design parameters, process specifications, and operating conditions. The best-case results indicate that SE-MeOH processes can break the barrier of the current limit of industrial methanol yield and improve it by 55–87% with a slight compromise (9–46%) on CH 3 OH production capacity. This trade-off is a result of periodic operation which is required for sorption enhancement. The techno-economic optimization of a base industrial reactor also leads to more than 7% improvement in methanol yield with only 2% decrease in production capacity while keeping the cost of syngas-to-methanol production competitive. The SE-MeOH system is further optimized through varying the feed specifications and number of reactor tubes. Furthermore, the results suggest that the synthesis gas composition, flow rate, and number of tubes are the major factors in determining methanol process performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CH 3 Radical Generation in Microplasmas for Up-Conversion of Methane

The conversion of methane, CH 4 , into higher value chemicals using low temperature plasmas is challenged by both improving efficiency and selectivity. One path towards selectivity is capturing plasma produced methyl radicals, CH 3 , in a solvent for aqueous processing. Due to the rapid reactions of methyl radicals in the gas phase, the transport distance from production of the CH 3 to its solvation should be short, which then motivates the use of microplasmas. The generation of CH 3 in Ar/CH 4 /H 2 O plasmas produced in nanosecond pulsed dielectric barrier discharge microplasmas is discussed using results from a computational investigation. The microplasma is sustained in the channel of a microfluidic chip in which the solvent flows along one wall or in droplets. CH 3 is primarily produced by electron-impact of and dissociative excitation transfer to CH 4 , as well as CH 2 reacting with CH 4 . CH 3 is rapidly consumed to form C 2 H 6 which, in spite of being subject to these same dissociative processes, accumulates over time, as do other stable products including C 3 H 8 and CH 3 OH. The gas mixture and electrical properties were varied to assess their effects on CH 3 production. CH 3 production is largest with 5% CH 4 in the Ar/CH 4 /H 2 O mixture due to an optimal balance of electron-impact dissociation, which increases with CH 4 percentage, and dissociative excitation transfer and CH 2 reacting with CH 4 , which decrease with CH 4 percentage. Design parameters of the microchannels were also investigated. Increasing the permittivity of the dielectrics in contact with the plasma increased the ionization wave intensity which increased CH 3 production. Increased energy deposition per pulse generally increased CH 3 production as does lengthening pulse length up to a certain point. The arrangement of the solvent flow in the microchannel can also affect the CH 3 density and fluence to the solvent. The fluence of CH 3 to the liquid solvent is increased if the liquid is immersed in the plasma as a droplet or is a layer on the wall where the ionization wave terminates. The solvation dynamics of CH 3 with varying numbers of droplets was also examined. Here, the maximum density of solvated methyl radicals CH 3aq occurs with a large number of droplets in the plasma. However, the solvated CH 3aq density can rapidly decrease due to desolvation, emphasizing the need to quickly react the solvated species in the solvent.

03 NATURAL GAS↗

Nanofiber-Based Total Internal Reflection Microscopy for Characterizing Colloidal Systems at the Microscale

Bulk colloidal interactions are dictated by the physical properties of individual particles dispersed in solution. However, for many applications it remains challenging to predict system-level colloidal behavior. Comprehensive characterization typically requires disparate techniques that can observe correlations between microscale particle–surface interactions and physical properties of the particles. In this work, we present a unique tin dioxide (SnO2) nanofiber-based total internal reflection microscopy (TIRM) method to efficiently characterize colloidal behavior as a function of particle-level properties in complex fluidic conditions. We develop and model the device physics to understand the physical underpinnings of the raw device data and then use these models to design proof-of-concept experiments to verify device function. Statistical trends in the data collected from a nominal system of 80 nm gold nanoparticles correspond to theoretical predictions as we vary key design parameters such as particle size, surface charge, and solution ionic strength. Lastly, we consider the practical limitations of the technique gleaned from our studies and offer suggestions for utilizing the platform to quantitatively analyze nonideal colloidal systems with distributed or heterogeneous system parameters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigating Spillover Energy as a Descriptor for Single-Atom Alloy Catalyst Design

The identification of thermodynamic descriptors of catalytic performance is essential for the rational design of heterogeneous catalysts. Here, we investigate how spillover energy, a descriptor quantifying whether intermediates are more stable at the dopant or host metal sites, can be used to design single-atom alloys (SAAs) for formic acid dehydrogenation. Further, using theoretical calculations, we identify NiCu as a SAA with favorable spillover energy and demonstrate that formate intermediates produced after the initial O–H activation are more stable at Ni sites where rate-determining C–H activation occurs. Surface science experiments demonstrated that NiCu(111) SAAs are more reactive than Cu(111) while they still follow the formate reaction pathway. However, reactor studies of silica-supported NiCu SAA nanoparticles showed only a modest improvement over Cu resulting from surface coverage effects. Overall, this study demonstrates the potential of engineering SAAs using spillover energy as a design parameter and highlights the importance of adsorbate–adsorbate interactions under steady-state operation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Asymmetric Miktoarm Star Polymers as Polyester Thermoplastic Elastomers

A library of polyester-based A(BA') n asymmetric miktoarm star polymers was synthesized with A, A' = poly(l-lactide) (PLLA) as the semicrystalline hard blocks and B = poly(4-methylcaprolactone) (PMCL) as the soft segment using a grafting-through platform known as μSTAR. The synthetic versatility of μSTAR enabled a systematic investigation of architectural design parameters, in particular the number of BA' arms (n), while holding the A, A', and B block lengths constant. The value of n has a pronounced impact on the mechanical properties of these high-molecular-weight miktoarm materials. Tensile toughness increases with n, an effect likely related to bridging, as the modulus drops because the hard-block volume fraction decreases. Furthermore, these insights expand our understanding of architecture effects in sustainable thermoplastic elastomers.

36 MATERIALS SCIENCE↗

Unraveling Ion Transport in Trifluoromethanesulfonimide Pentablock Copolymer Membranes in Nonaqueous Electrolytes

Cation exchange membranes provide a key function in various nonaqueous energy storage technologies. As such, understanding the role of a nonaqueous liquid electrolyte on ion transport through a membrane is imperative. This study unravels relationships between membrane ion transport and electrolyte salt concentration utilizing a trifluoromethanesulfonimide-based pentablock copolymer membrane with polar and nonpolar nonaqueous electrolyte solutions. Here, the membrane plasticized with propylene carbonate (PC) exhibits a single-ion conductivity of 9.3 × 10 –6 S/cm at 25 °C. Tailoring the nonaqueous electrolyte and electrolyte salt concentration enables the single-ion conducting membrane to maintain a high cation transport number, >0.75, and boost ion conductivity more than 10 times to 1.3 × 10 –4 S/cm at 25 °C for the PC-based electrolyte solution. The findings provide critically important design parameters for energy storage systems utilizing nonaqueous electrolytes, such as Li- and Na-ion batteries and nonaqueous flow battery technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Miktoarm Stars via Grafting-Through Copolymerization: Self-Assembly and the Star-to-Bottlebrush Transition

The grafting-through copolymerization of two distinct macromonomers via ring-opening metathesis polymerization is normally used to form statistical or diblock bottlebrush polymers with large total backbone degrees of polymerization (N BB ) relative to that of the side-chains (N SC ). Here, we demonstrate that Grubbs-type chemistry in the opposite limit, namely N BB << N SC , produces well-defined materials with excellent control over ensemble-averaged properties, including molar mass, dispersity, composition, and number of branch points. The dependence of self-assembly on these molecular design parameters was systematically probed using small angle X-ray scattering and self-consistent field theoretic simulations. Moreover, our analysis supports the notion that two-component bottlebrush copolymers with small N BB behave like miktoarm star polymers. The star-to-bottlebrush transition is quantifiable for both statistical and diblock sequences by unique signatures in the experimental scaling of domain spacing and simulated distribution of backbone/side-chain density within lamellar unit cells. These findings represent a conceptual framework that simplifies the synthesis of miktoarm star polymers when dispersity in the number of arms and composition can be tolerated. The analytical approach introduced to distinguish chain conformations in complex macromolecules also complements previous methods, for example form factor scattering and rheology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Trap-Assisted Dopant Compensation Prevents Shunting in Poly-Si Passivating Interdigitated Back Contact Silicon Solar Cells

Using a trap-assisted compensation model, we explain why polycrystalline Si (poly-Si) passivating contacts are able to achieve low leakage current between the doped fingers of interdigitated back contact (IBC) monocrystalline Si solar cells despite mixing of boron and phosphorus dopants in the isolation region. The fill factor of IBC solar cells is strongly affected by the electrical isolation region between n- and p-type fingers, as this region is critical in minimizing shunting losses. During fabrication of monocrystalline Si solar cells with poly-Si passivating contacts, the intrinsic poly-Si isolation region inevitably gets contaminated with both p- and n-type dopants. Using dopant profiles measured with time-of-flight secondary ion mass spectrometry and scanning probe measurements of the isolation region, we demonstrate that despite the dopant spreading during cell processing, a well-compensated region between the doped fingers exists that prevents shunting. The trap-assisted dopant compensation mechanism significantly widens the compensated region to tens of microns, where the residual dopant densities are below the trap density. This enables a high-resistivity region, resulting in low shunt current. Using one-dimensional (1-D) finite element diode simulations, we identify the design parameters and experimental conditions under which a sufficiently resistive region can form. Furthermore, our measurements of 2-D local resistivity and work function maps across the isolation region using scanning spreading resistance microscopy and Kelvin probe force microscopy demonstrate the existence of a highly resistive, wide compensated region and confirm our proposed compensation mechanism. For our structures, this region is ~25 µm in width within a ~150 µm wide finger isolation region with nearly 3 orders of magnitude higher resistivity than the regions dominated by a single type of dopant.

14 SOLAR ENERGY↗

Quaternized Polynorbornene Random Copolymers for Fuel Cell Devices

Quaternized polymers are critical components for various energy devices. Vinyl-addition polynorbornenes provide high mechanical strength, high ion conductivity, and chemical stability in a wide range of pH environments due to the all-C–C bond backbone. In this paper, we present the synthesis of a series of quaternized polynorbornene random copolymers via vinyl addition polymerization and elucidate the impact of polymer composition on their properties. The quaternary ammonium alkyl tether length and the ratio of n-hexylnorbornene to unsubstituted norbornene are systemically tailored. A copolymer of 5-(3-bromopropyl)-2-norbornene and norbornene with pendant trimethylammonium groups achieved hydroxide conductivity of 109 mS/cm at 80 °C with a modest water uptake of 72%. The addition of n-hexylnorbornene to the copolymer, to make a terpolymer, allows for the polymer composition to be tailored for properties, including a decrease in water uptake and higher processability, despite a slightly decreased hydroxide conductivity. Moreover, the developed membranes are chemically robust and highly mechanically stable, enabling thin membranes to be easily fabricated. This study provides insight into important design parameters for quaternized polynorbornenes for a variety of energy storage and conversion devices, especially fuel cells.

25 ENERGY STORAGE↗

Engineering the Kinetics of Directed Self-Assembly of Block Copolymers toward Fast and Defect-Free Assembly

Directed self-assembly (DSA) of block copolymers (BCPs) can achieve perfectly aligned structures at thermodynamic equilibrium, but the self-assembling morphology can become kinetically trapped in defective states. Understanding and optimizing the kinetic pathway toward domain alignment is crucial for enhancing process throughput and lowering defectivity to levels required for semiconductor manufacturing, but there is a dearth of experimental, three-dimensional studies of the kinetic pathways in DSA. Here, we combined arrested annealing and TEM tomography to probe the kinetics and structural evolution in the chemoepitaxy DSA of PS-b-PMMA with density multiplication. During the initial stages of annealing, BCP domains developed independently at first, with aligned structures at the template interface and randomly oriented domains at the top surface. As the grains coarsened, the assembly became cooperative throughout the film thickness, and a metastable stitch morphology was formed, representing a kinetic barrier. The stitch morphology had a three-dimensional structure consisting of both perpendicular and parallel lamellae. On the basis of the mechanistic information, we studied the effect of key design parameters on the kinetics and evolution of structures in DSA. Three types of structural evolutions were observed at different film thicknesses: (1) immediate alignment and fast assembly when thickness 1.64L(0). We found that the DSA kinetics can be significantly improved by avoiding the formation of the metastable stitch morphology. Increasing template topography also enhanced the kinetics by increasing the PMMA guiding surface area. A combination of 0.75L(0) BCP thickness and 0.50L(0) template topography achieved perfect alignment over 100 times faster than the baseline process. This research demonstrates that an improved understanding of the evolution of structures during DSA can significantly improve the DSA process.

Ren, Jiaxing↗

Roadmap of Solid-State Lithium-Organic Batteries toward 500 Wh kg –1

Over the past few years, solid-state electrolytes (SSEs) have attracted tremendous attention due to their credible promise toward high-energy batteries. In parallel, organic battery electrode materials (OBEMs) are gaining momentum as strong candidates thanks to their lower environmental footprint, flexibility in molecular design and high energy metrics. Integration of the two constitutes a potential synergy to enable energy-dense solid-state batteries (SSBs) with high safety, low cost, and long-term sustainability. Here, we present the technological feasibility of combining OBEMs with SSEs along with the possible cell configurations that may result from this peculiar combination. We provide an overview of organic SSBs and discuss their main challenges. We analyze the performance-limiting factors and the critical cell design parameters governing cell-level specific energy and energy density. Lastly, we propose guidelines to achieve 500 Wh kg –1 cell-level specific energy with solid-state Li–organic batteries.

25 ENERGY STORAGE↗

Accelerated Self-Healing and Property Recovery in Brush Particle Solids Featuring Brush Dispersity

Brush particles, hybrid materials consisting of polymer chains tethered to particle surfaces, offer tunable properties that make them promising candidates for advanced functional materials. This study investigated the role of chain dispersity in the viscoelastic self-healing of poly (methyl acrylate) (PMA)-based brush particle solids. Increasing the molecular weight dispersity of grafted chains significantly enhanced both strain-to-fracture and toughness of brush particle solids, while the elastic modulus and glass transition temperature were independent of chain dispersity. Cut-and-adhere testing revealed a significant acceleration of the rate of toughness recovery in high-dispersity systems as compared to low-dispersity analogs for which toughness recovery markedly lagged the recovery of Young’s modulus. The results suggest that structure and property recovery in brush particle solids are sensitive to the dynamical heterogeneity of brush canopies and highlight the role of molecular weight dispersity as a design parameter to enable hybrid materials with advanced self-healing ability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Viscosity-Controlled Thiol–Ene Reaction and Its Impact on Mechanical Response of Dynamic Networks

The impact of curing conditions on the final properties of thioester-thiol-based dynamic polymer networks was systematically investigated. Despite identical monomer and cross-linker compositions, networks synthesized in the absence of solvent exhibited significantly higher shear moduli and longer relaxation times compared to those cured in solvent. These differences arise from viscosity-controlled photoinitiated thiol–ene reactions, where reduced chain mobility under solvent-free conditions suppresses termination between two polymer radicals, leading to higher reaction conversion. Fourier Transform Infrared (FTIR) spectroscopy and solid-state NMR (ssNMR) spectroscopy confirmed a greater degree of “click” reaction completion in higher viscosity environments. Control experiments revealed that prolonged radical lifetimes and suppressed termination reactions under solvent-free curing conditions contribute to these variations. Here, this study highlights the crucial role of processing conditions in determining cross-link density and, consequently, the dynamic mechanical behavior of polymer networks. It demonstrates that, beyond polymer chemistry, dynamic cross-linker design, and phase separation, curing conditions serve as a key design parameter for tailoring material performance to specific applications.

polymers↗

Tunable Nanoscale Structure via Divalent Ion Identity in Charged-Neutral Polymer Blends

Charged-neutral polymer blends, wherein an ioncontaining polymer is blended with a neutral polymer, are potential candidates for battery electrolytes due to their improved ion transport properties and electrochemical stability. Though electrostatic interactions in charged polymer blends can theoretically stabilize ordered nanostructures analogous to those observed in neutral block copolymers, direct experimental evidence remains limited. Here, we investigate the effects of divalent cation identity on the nanoscale morphology of charged-neutral polymer blends composed of poly(ethylene oxide) (PEO) and Mg 2+ or Ca 2+ ioncontaining polymers, poly[3-(methylacryloxy)propylsulfonyl-1-(trifluoromethanesulfonylimide)] (P(Mg(MTFSI) 2 ) or P(Ca- (MTFSI) 2 ). By tuning the size of the divalent counterion, we are able to precisely tune the ion solvation between the free cation and PEO, which acts as a solvent in this system. Differential scanning calorimetry (DSC) and small-angle X-ray scattering (SAXS) measurements reveal that Mg 2+ and Ca 2+ ions induce distinct structural behavior. In both systems, the blends become more miscible as the concentration of ion-containing polymer is increased indicated by increased suppression of PEO crystallinity. At the highest concentrations of P(Mg(MTFSI) 2 ), the blends undergo microphase separation and generate nanostructures with shortranged ordering. In contrast, calcium ions, which are more readily solvated by PEO, produce more homogeneous blends characterized by a single glass-transition temperature and featureless SAXS data. The results demonstrate the novel experimental confirmation that charged-neutral polymer blends can undergo microphase separation and show that counterion identity can be exploited as a design parameter to control nanoscale morphology.

Ions↗

Chaotrope-Based Approach for Rapid In Vitro Assembly and Loading of Bacterial Microcompartment Shells

Bacterial microcompartments (BMCs) are proteinaceous organelles that self-assemble into selectively permeable shells that encapsulate enzymatic cargo. BMCs enhance catalytic pathways by reducing crosstalk among metabolites, preventing harmful intermediates from leaking into the cytosol and increasing reaction efficiency via enzyme colocalization. The intrinsic properties of BMCs make them attractive for biotechnological engineering. However, in vivo expression methods for shell synthesis have significant drawbacks that limit the potential design space for these nanocompartments. Here, we describe the development of an efficient and rapid method for the in vitro assembly of BMC shells from their protein building blocks. Our method enables large-scale construction of BMC shells by utilizing urea as a chaotropic agent to control self-assembly and provides an approach for encapsulation of both biotic and abiotic cargo under a broad range of reaction conditions. We demonstrate an enhanced level of control over the assembly of BMC shells in vitro and expand the design parameter space for engineering BMC systems with specialized and enhanced catalytic properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tracking Optical Phonon Dynamics in InP Nanocrystals via Transient Absorption and Femtosecond Stimulated Raman Spectroscopy

Semiconductor nanocrystals (NCs) offer actualized and prospective utility in optoelectronic technologies, yet key aspects of their thermal and vibrational behaviors remain unresolved. Compared with bulk crystals, heat dissipation involving NCs can differ substantially owing to pervasiveness of interfacial scattering, phonon confinement, and relaxed phonon momentum selection rules, as well as influences of ligands. Here, in addition to transient absorption, we use femtosecond stimulated Raman spectroscopy to track nonequilibrium optical-phonon dynamics in InP NCs capped with myristic acid ligands and compare the same particles coated with a ZnS shell. We identify distinct phonon decay pathways in ligand-capped versus ZnS-shelled NCs. Increasing the excitation density and introducing the ZnS shell measurably modify optical-phonon lifetimes, whereas phonon formation times remain largely unchanged. In addition, we observe phonon mode softening in ligand-capped nanocrystals, consistent with lattice expansion. Together, these results demonstrate that core–shell structures can strongly govern nanocrystal thermal dissipation pathways and should be considered a key design parameter for optoelectronic operation.

dissipation↗

Controlling Mass Transport in Direct Carbon Dioxide Zero-Gap Electrolyzers via Cell Compression

The development of high-performance CO 2 electrolyzers is crucial for accelerating the sustainable production of fuels and chemicals integrated with renewable energy sources. Here, we introduce a methodology to actively control mass transport inside a realistic zero-gap membrane electrode assembly of a CO 2 electrolyzer by varying the gasket thickness, which consequently changes the cell compression. This allows control over the thickness and porosity of the gas diffusion electrodes, influencing the overall electrolyzer performance, as demonstrated using Ag-deposited electrodes. At low operating voltages (<2.9 V), both high- and low-compression electrolyzers exhibit similar faradaic efficiencies and partial current densities for CO formation. However, at high voltages, the low-compression electrolyzer with high electrode porosity demonstrates superior CO selectivity and activity with suppressed H 2 formation. These experimental results are validated by the computational membrane electrode assembly (MEA) model developed by using the measured in situ electrode thicknesses and electrode porosities. Additionally, liquid electrolyte saturation at the catalyst layer is found to play a dominant role in determining the mass transport, resulting in a decreased electrolyzer performance with low electrode porosity. Finally, the systematic investigation in this study improves the understanding of the transport dynamics in MEA-based devices and provides insights into optimizing device design parameters for industry-relevant CO 2 electrolysis.

30 DIRECT ENERGY CONVERSION↗

Dynamics of soft Nanomaterials captured by transmission electron microscopy in liquid water

In this paper we present in situ transmission electron microscopy (TEM) of soft, synthetic nanoparticles with a comparative analysis using conventional TEM methods. This comparison is made with the simple aim of describing what is an unprecedented example of in situ imaging by TEM. However, we contend the technique will quickly become essential in the characterization of analogous systems, especially where dynamics are of interest in the solvated state. In this case, particles were studied which were obtained from the direct polymerization of an oxaliplatin analog, designed for an ongoing program in novel chemotherapeutic delivery systems. The resulting nanoparticles provided sufficient contrast for facile imaging in situ, and point toward key design parameters that enable this new characterization approach for organic nanomaterials. We describe the preparation of the synthetic micellar nanoparticles to- gether with their characterization in liquid water.

Environmental Molecular Sciences Laboratory↗