Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffraction pattern”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

Thermal behavior of the amorphous precursors of the ZrO{sub 2}-SnO{sub 2} system

Thermal behavior of the amorphous precursors of the ZrO{sub 2}-SnO{sub 2} system on the ZrO{sub 2}-rich side of the concentration range, prepared by co-precipitation from aqueous solutions of the corresponding salts, was monitored using differential thermal analysis, X-ray powder diffraction, Raman spectroscopy, field emission scanning electron microscopy (FE-SEM) and energy dispersive X-ray spectrometry (EDS). The crystallization temperature of the amorphous precursors increased with an increase in the SnO{sub 2} content, from 405 deg. C (0 mol% SnO{sub 2}) to 500 deg. C (40 mol% SnO{sub 2}). Maximum solubility of Sn{sup 4+} ions in the ZrO{sub 2} lattice ({approx}25 mol%) occurred in the metastable products obtained upon crystallization of the amorphous precursors. A precise determination of unit-cell parameters, using both Rietveld and Le Bail refinements of the powder diffraction patterns, shows that the incorporation of Sn{sup 4+} ions causes an asymmetric distortion of the monoclinic ZrO{sub 2} lattice. The results of phase analysis indicate that the incorporation of Sn{sup 4+} ions has no influence on the stabilization of cubic ZrO{sub 2} and negligible influence on the stabilization of tetragonal ZrO{sub 2}. Partial stabilization of tetragonal ZrO{sub 2} in products having a tin content above its solid-solubility limit was attributed to the influence of ZrO{sub 2}-SnO{sub 2} surface interactions. In addition to phases closely structurally related to cassiterite, monoclinic ZrO{sub 2} and tetragonal ZrO{sub 2}, a small amount of metastable ZrSnO{sub 4} phase appeared in the crystallization products of samples with 40 and 50 mol% of SnO{sub 2} calcined at 1000 deg. C. Further temperature treatments caused a decrease in and disappearance of metastable phases. The results of the micro-structural analysis show that the sinterability of the crystallization products significantly decreases with an increase in the SnO{sub 2} content.

36 MATERIALS SCIENCE↗

Partial rotational lattice order–disorder in stefin B crystals

Crystal lattice disorders are a phenomenon which may hamper the determination of macromolecular crystal structures. Using the case of the crystal structure of stefin B, identification of rotational order–disorder and structure determination are described. At present, the determination of crystal structures from data that have been acquired from twinned crystals is routine; however, with the increasing number of crystal structures additional crystal lattice disorders are being discovered. Here, a previously undescribed partial rotational order–disorder that has been observed in crystals of stefin B is described. The diffraction images revealed normal diffraction patterns that result from a regular crystal lattice. The data could be processed in space groups I4 and I422, yet one crystal exhibited a notable rejection rate in the higher symmetry space group. An explanation for this behaviour was found once the crystal structures had been solved and refined and the electron-density maps had been inspected. The lattice of stefin B crystals is composed of five tetramer layers: four well ordered layers which are followed by an additional layer of alternatively placed tetramers. The presence of alternative positions was revealed by the inspection of electron-density score maps. The well ordered layers correspond to the crystal symmetry of space group I422. In addition, the positions of the molecules in the additional layer are related by twofold rotational axes which correspond to space group I422; however, these molecules lie on the twofold axis and can only be related in a statistical manner. When the occupancies of alternate positions and overlapping are equal, the crystal lattice indeed fulfills the criteria of space group I422; when these occupancies are not equal, the lattice only fulfills the criteria of space group I4.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermoelectric properties of ultra-low thermal conductivity half-Heusler alloy

The half-Heusler alloy HfNiGe has been synthesized by arc melting from high purity elements followed by annealing at 1000 K for 6 days to homogenize completely. The X-ray diffraction pattern indicates the presence of mainly an orthorhombic phase with small amount of other binary phases. The electrical resistivity is found to be low and increases slightly with temperature from 14 µΩ-m to 24 µΩ-m, indicating a semi metallic behavior. As a result the Seebeck coefficient is found to be low and also increases with temperature from −11 µV K{sup −1} to −19.5 µV K{sup −1}. The thermal conductivity has been determined using a combination of heat capacity and thermal diffusivity. It decreases from ~ 1.9 Wm{sup −1}K{sup −1} at room temperature to ~ 0.007 Wm{sup −1}K{sup −1} at 843 K, an extremely low value for a half-Heusler alloy. The thermal conductivity reduction is found to be mainly due to a sharp decrease in heat capacity for T> 650 K. This leads to a divergence of figure of merit at high temperatures, >800 K, from ~0.05 to 2 at 843 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

BiNb{sub 3}O{sub 9}, a metastable perovskite phase with Bi/vacancy ordering: Crystal structure and dielectric properties

The perovskite, BiNb{sub 3}O{sub 9}, is a metastable phase in the Bi{sub 2}O{sub 3}:Nb{sub 2}O{sub 5} system that forms only when cooled from a liquid phase. Crystals of BiNb{sub 3}O{sub 9} prepared in this way display pseudocubic 2a×2a×2a diffraction patterns, due to non-merohedral twinning of a tetragonal a×a×2a cell, with the doubled axis oriented along all three pseudocubic axes. The structure was refined using data collected on a twinned crystal to R{sub 1}=0.034 for 318 observed reflections. BiNb{sub 3}O{sub 9} has tetragonal symmetry, P4/mmm with a=3.9459(3) Å, c=7.8919(6) Å. Partial ordering of Bi atoms and vacancies occurs, with alternate (0 0 1) planes having 28% and 42% Bi occupancies. The Bi atoms are displaced from the A-site special positions by up to 0.4 Å. The compound exhibits a relatively high permittivity value of ∼230 at room temperature, and shows a sharp increase with increasing temperature towards an apparent diffuse phase transition above ∼180 °C, with an associated frequency dependent peak in the dielectric loss. - Graphical abstract: Structure for BiNb{sub 3}O{sub 9}, showing split Bi atoms. Highlights: ► First characterisation of a new perovskite phase with potentially useful dielectric properties. ► Solving of the structure using single crystal data on a multiply twinned crystal. ► Measurement of dielectric properties that show the phase has a high dielectric permittivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Studies on the structural, electrical and magnetic properties of LaCrO{sub 3}, LaCr{sub 0.5}Cu{sub 0.5}O{sub 3} and LaCr{sub 0.5}Fe{sub 0.5}O{sub 3} by sol–gel method

Highlights: ► LaCr{sub 0.5}M{sub 0.5}O{sub 3} (M = Cr{sup 3+}, Cu{sup 2+} and Fe{sup 3+}) was synthesized by simple sol–gel technique with subsequent heat treatment. ► The compound formation temperature was optimized through XRD analysis. ► The effects of Cu{sup 2+} and Fe{sup 3+} on the electrical properties of LaCrO{sub 3} were studied using impedance spectroscopy. ► The temperature dependence of electrical conductivity was discussed for LaCr{sub 0.5}Cu{sub 0.5}O{sub 3}. ► The magnetization was found to be enhanced in the LaCr{sub 0.5}Fe{sub 0.5}O{sub 3}. -- Abstract: The structural, electrical and magnetic properties of LaCr{sub 0.5}M{sub 0.5}O{sub 3} (M = Cr{sup 3+}, Cu{sup 2+} and Fe{sup 3+}) synthesized by a sol–gel technique were studied. The X-ray diffraction pattern shows the structure to be orthorhombic and the size of the particles is around 100 nm as seen from the TEM images. The effects of Cu{sup 2+} and Fe{sup 3+} on the electrical properties of LaCrO{sub 3} were studied using impedance spectroscopy at room temperature (RT). The properties of LaCr{sub 0.5}Cu{sub 0.5}O{sub 3} were studied over a wide range of temperature from RT to 533 K. A maximum conductivity of 1.7 × 10{sup −3} S cm{sup −1} was observed for LaCr{sub 0.5}Cu{sub 0.5}O{sub 3} at a measured temperature of 533 K. The impedance spectra indicate a negative temperature coefficient of resistance (NTCR) and also imply the conduction is through bulk of the material. The magnetic studies performed using a SQUID magnetometer interpret the antiferromagnetically ordered LaCrO{sub 3} to behave ferromagnetically on the addition of Cu{sup 2+} and Fe{sup 3+}, and the magnetization was found to be enhanced in the LaCr{sub 0.5}Fe{sub 0.5}O{sub 3}.

36 MATERIALS SCIENCE↗

Room temperature ferromagnetism in Mn, Ni and Co ions doped Cu{sub 2}O nanorods

Here we report the synthesis and characterization of Cu{sub 2}O nanorods doped with Mn, Ni and Co transition metal ions and the study of their magnetic properties. Synthesis of the nanorods was carried out by the modified polyol method. Powder X-ray diffraction patterns clearly showed them to be polycrystalline single phase material. They exhibited ferromagnetic behavior at room temperature, however no such behavior was observed for the reference undoped sample, which indicated that unintentionally introduced magnetic impurities were not responsible for the observed phenomenon. Ferromagnetic behavior was found to be dependent on the dopant concentration and increased consistently with its increment in the material. The total magnetic moments contribution was calculated for the dopant concentration and was found to be insignificant to account for the observed ferromagnetism, therefore it was suggested that ferromagnetism could have conjured up from the induced magnetic moment in the defects created as cation vacancies in the material. The presence of the defects was supported by the room temperature photoluminescence study which showed that intensity of the peaks was dependent on the dopant concentration and increased consistently with it. There was strong correlation between the magnitude of the photoluminescence peak and the observed ferromagnetic property in the doped samples. -- Graphical Abstract: Room temperature ferromagnetism was observed in the Cu{sub 2}O nanorods doped with Mn, Ni and Co ions. The origin seems to be the defects of cation vacancies created by the dopant ions. Display Omitted

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structure of oxides prepared by decomposition of layered double Mg–Al and Ni–Al hydroxides

Abstracts: Thermal decomposition of Mg–Al and Ni–Al layered double hydroxides LDH at temperatures lower than 800 °C leads to the formation of oxides with different structures. Mg–Al oxide has a very defective structure and consists of octahedral layers as in periclase MgO and mixed octahedral–tetrahedral layers as in spinel MgAl{sub 2}O{sub 4}. Mixed Ni–Al oxide has a sandwich-like structure, consisting of a core with Al-doped NiO-like structure and some surface layers with spinel NiAl{sub 2}O{sub 4} structure epitaxial connected with the core. Suggested models were verified by simulation of X-ray diffraction patterns using DIFFaX code, as well as HRTEM, IR-, UV-spectroscopies, and XPS. - Graphical abstract: In the Mg–Al layered double hydroxide Al{sup 3+} ions migrate into interlayers during decomposition. The Mg–Al oxide represents sequence of octahedral and octahedral–tetrahedral spinel layers with vacancies. The Ni–Al oxide has a sandwich-like structure with NiO-like core and surface spinel layers as a result of migration of Al{sup 3+} ions on the surface. The models explain the presence and absence of “memory effect” for the Mg–Al and Ni–Al oxides, respectively. - Highlights: • We study products of Mg(Ni)–Al LDH decomposition by calcination at 500(400)–800 °C. • In Mg–Al/Ni–Al LDH Al ions migrate into interlayers/on the surface during decomposition. • Mg–Al oxide represents sequence of periclase- and spinel-like layers with vacancies. • Ni–Al oxide has a sandwich-like structure with NiO-like core and surface spinel layers. • The models explain the presence/absence of “memory effect” for Mg–Al/Ni–Al oxides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Study of Lead Free Ferroelectric Films for New Solar Cells

We report on the deposition by a sol-gel process of Ba{sub 0.8}Sr{sub 0.2}TiO{sub 3} and Ba{sub 0.9}Sr{sub 0.1}TiO{sub 3} films on platinum coated silicon substrates. X-Ray diffraction patterns show that the films are (111) preferentially oriented. The surface morphology is smooth, without cracks and the grain size is about 50 nm as determined by AFM and SEM. The dielectric constant measured from 10{sup 2} to 10{sup 6} Hz decreases slightly and is around 400 at 10{sup 4} Hz. The losses are constant in a first approximation for a 1.5 {mu}m thick BST(80/20) film with a value of 0.03 at 10 kHz. The existence of an hysteresis cycle attests that the films, whatever their thickness, are in a ferroelectric state. Pyroelectric coefficients have been determined and the best figure of merit obtained on BST(90/10) at 293 K and 10 kHz is of 149 {mu}C/m{sup 3}/K. The best dielectric and pyroelectric properties (tg{delta} = 0.006 at 1 MHz, tunability = 30%, {gamma} = 340 {mu}C/m{sup 2}/K) were obtained on the 400 nm BST(90/10) film. Work is in progress to characterize the piezoelectric and photovoltaic properties of our BST films.

36 MATERIALS SCIENCE↗

Structural investigation and microwave characteristics of (Ba{sub 0.2}La{sub 0.8})Fe{sub 0.2}Mn{sub 0.4}Ti{sub 0.4}O{sub 3} absorbing materials

Synthesis and characterization of (Ba{sub 0.2}La{sub 0.8})Fe{sub 0.2}Mn{sub 0.4}Ti{sub 0.4}O{sub 3} absorbing material by mechanical alloying process has been performed. The absorbing material was prepared by oxide materials, namely BaCO{sub 3}, La{sub 2}O{sub 3}, TiO{sub 2}, Fe{sub 2}O{sub 3}, and MnCO{sub 3}. The mixture was milled for 10 h and then sintered at a temperature of 1000 ° C for 10 h. The refinement results of x-ray diffraction pattern of lanthanum manganite substituted with barium showed that the sample consisted of two phases, namely, La{sub 0.9125}MnO{sub 3} phase which has a structure monoclinic (I12/a1) with lattice parameters a = 5.527(1) Å, b = 5.572(1) Å and c = 7.810(1) Å, α = γ = 90° and β = 89.88(5)°, the unit cell volume of V = 240.57(8) Å{sup 3}, and the atomic density of ρ = 6.238 gr.cm{sup −3}. The microstructure analyses showed that the particle shapes was polygonal with the varied particle sizes of 1 ∼ 3 μm distributed homogeneously on the surface of the samples. The results of the electromagnetic wave absorption curve analysis by using a vector network analyzer (VNA) showed that the sample can absorb microwaves in the frequency range of 8-15 GHz with a very wide absorption bandwidth. It indicates that the as prepared absorber presents potential absorbing property in X and Ku-band. We concluded that the (Ba{sub 0.2}La{sub 0.8})Fe{sub 0.2}Mn{sub 0.4}Ti{sub 0.4}O{sub 3} material can be applied as a candidate absorber material of microwaves or electromagnetic wave.

36 MATERIALS SCIENCE↗

Multiferroic and magnetoelectric properties of CoFe{sub 2}O{sub 4}/Pb{sub 1−x}Sr{sub x}TiO{sub 3} composite films

To realize multiferroic and magnetoelectric properties, bi-layered nanocomposite films consisting of CoFe{sub 2}O{sub 4} (CFO)/Pb{sub 1−x}Sr{sub x}TiO{sub 3} (PST) phases (x = 0.1, 0.2, and 0.3) have been deposited on Pt/TiO{sub 2}/SiO{sub 2}/Si substrate by using a metallo-organic decomposition process. Both the PST perovskite and the CFO spinel phases are confirmed from X-ray diffraction patterns and Raman spectra of the composite films. The composite films exhibit room temperature multiferroic properties. The values of saturation magnetization (M{sub s}), remanent magnetization (M{sub r}), and coercive field (H{sub c}) of the composite films are in the range of 108–119 kA/m, 42–51 kA/m, and 44.5–64.1 kA/m, respectively. In addition, the saturation polarization (P{sub s}), remanent polarization (P{sub r}), and electrical coercive field (E{sub c}) are observed in the range of 11.3–14.4 μC/cm{sup 2}, 2.9–4.8 μC/cm{sup 2}, and 56–59.5 kV/cm, respectively. The dielectric response in the presence of applied magnetic field, H{sub dc} ∼ 238.6 kA/m shows a high magnetocapacitance value ∼385% at frequency 100 kHz for CFO/PST composite film with x = 0.1. The maximum magnetoelectric voltage co-efficient value, α{sub E} ∼ 380 kV/(m × T) has been achieved in the composite films with x = 0.1. The influence of elastic/and or interfacial strain on multiferroic magnetoelectric properties is evident from the results.

36 MATERIALS SCIENCE↗

Effect of conjugation with biomolecules on photoluminescence and structural characteristics of CdSe/ZnS quantum dots

The photoluminescence and photoluminescence excitation spectra, the X-ray diffraction patterns, and the effect of conjugation with biomolecules upon these characteristics are studied for silanized CdSe/ZnS quantum dots. Along with the band of annihilating excitons in the quantum dots, the luminescence spectra exhibit emission associated with defects. It is established that the emission spectrum of defects involves at least two components. It is shown that the defects are located mainly at the small-sized quantum dots; the defects responsible for the long-wavelength component are located mainly at the quantum dots larger in size than the quantum dots, at which the defects responsible for the short-wavelength component are located. It is found that conjugation with biomolecules induces not only the blue shift of the excitonic band, but transformation of the emission spectra of defects and an increase in the contribution of defects to the luminescence spectrum as well. The changes observed in the emission spectrum of defects are attributed to the formation of certain emission centers. It is shown that, when conjugated with biomolecules, the quantum dots experience increasing compression strains. This effect is responsible for the blue shift of the luminescence band of the quantum dots.

36 MATERIALS SCIENCE↗

Effect of the cadmium chloride treatment on RF sputtered Cd{sub 0.6}Zn{sub 0.4}Te films for application in multijunction solar cells

Single phase Cd{sub 0.6}Zn{sub 0.4}Te (CdZnTe) films of 1 μm thickness were deposited by radio frequency planar magnetron sputter deposition on commercial soda lime glass samples coated with fluorine-doped tin oxide and cadmium sulphide (CdS). The stack was then treated with cadmium chloride (CdCl{sub 2}) at different temperatures using a constant treatment time. The effect of the CdCl{sub 2} treatment was studied using optical, materials, and electrical characterization of the samples and compared with the as-deposited CdZnTe film with the same stack configuration. The band gap deduced from Tauc plots on the as-deposited CdZnTe thin film was 1.72 eV. The deposited film had good crystalline quality with a preferred orientation along the {111} plane. After the CdCl{sub 2} treatment, the absorption edge shifted toward longer wavelength region and new peaks corresponding to cadmium telluride (CdTe) emerged in the x-ray diffraction pattern. This suggested loss of zinc after the CdCl{sub 2} treatment. The cross sectional transmission electron microscope images of the sample treated at 400 °C and the energy dispersive elemental maps revealed the absence of chlorine along the grain boundaries of CdZnTe and residual CdTe. The presence of chlorine in the CdTe devices plays a vital role in drastically improving the device performance which was not observed in CdZnTe samples treated with CdCl{sub 2}. The loss of zinc from the surface and incomplete recrystallization of the grains together with the presence of high densities of stacking faults were observed. The surface images using scanning electron microscopy showed that the morphology of the grains changed from small spherical shape to large grains formed due to the fusion of small grains with distinct grain boundaries visible at the higher CdCl{sub 2} treatment temperatures. The absence of chlorine along the grain boundaries, incomplete recrystallization and distinct grain boundaries is understood to cause the poor performance of the fabricated devices.

36 MATERIALS SCIENCE↗

Adaptively coupled phase retrieval in multi-peak Bragg coherent diffraction imaging

Recent advances in Bragg coherent diffraction imaging (BCDI) experimental techniques permit routine measurement of multiple Bragg peaks from a single crystalline grain. The resulting images contain the full lattice distortion vector field which can be differentiated to provide lattice strain and rotation. With the advent of fourth-generation synchrotron light sources, such multi-peak datasets are produced at high rates, facilitating the need for rapid phase retrieval of the multiple peaks and subsequent image analysis. Here we describe and demonstrate a new implementation of a coupled phase retrieval technique for multi-peak BCDI which simultaneously treats each Bragg peak of the dataset and produces a three-dimensional image of the crystal's morphology and lattice distortion field. In addition, this method uses the redundant information contained in the various Bragg diffraction patterns to detect and suppress spurious signal appearing on the detector in a subset of the measurements. Compared with manual data editing, adaptive coupling produces a more consistent phase profile in reciprocal space and sharper surfaces in direct space, with no significant difference in computational cost. These improvements reduce the need for manual preprocessing and enable robust high-throughput analysis of multi-peak BCDI data, supporting near-real-time strain microscopy at modern synchrotron facilities.

36 MATERIALS SCIENCE↗

Thickness dependent structural, magnetic and magneto-transport properties of epitaxial Nd{sub 0.50}Sr{sub 0.50}MnO{sub 3} thin films

We report the thickness-dependent structural, magnetic and magneto-transport properties in epitaxial Nd{sub 0.50}Sr{sub 0.50}MnO{sub 3} thin films (10 to 300nm) prepared by DC magnetron sputtering technique on single crystalline (001) oriented substrate LaAlO{sub 3}. X-ray diffraction pattern reveals the epitaxial growth of all the films and the out-of-plane lattice parameter of films were found to increase with thickness. As thickness of the film increases the paramagnetic insulator (PMI) to ferromagnetic metal (FMM) transition temperature (T{sub C}), charge ordered transition temperature (T{sub CO}) and magnetic moment were found to increase with a strong bifurcation in ZFC-FC magnetization. The asymmetry in the coercivity seen in field dependent magnetization loops (M-H loops) suggests the presence of exchange bias (EB) effect. While temperature dependent resistivity of films show the semiconducting nature for thickness 10-200nm in temperature range from 5-300K, the film of thickness 300nm shows the insulator to metal transition with transition temperature (T{sub IM}) at 175K. Temperature dependent low field magnetoresistance (LFMR) measured at 4kOe found to decrease with thickness and for high field magnetoresistance (HFMR) at 40kOe and 60kOe also show similar dependence and a crossover at intermediate temperature range in the magnitude of MR between 10nm and 200nm films at constant field. Colossal increase in magnetoresistance observed for 10nm film at low temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

POWTEX visits POWGEN

The high-intensity time-of-flight (TOF) neutron diffractometer POWTEX for powder and texture analysis is currently being built prior to operation in the eastern guide hall of the research reactor FRM II at Garching close to Munich, Germany. Because of the world-wide 3 He crisis in 2009, the authors promptly initiated the development of 3 He-free detector alternatives that are tailor-made for the requirements of large-area diffractometers. Herein is reported the 2017 enterprise to operate one mounting unit of the final POWTEX detector on the neutron powder diffractometer POWGEN at the Spallation Neutron Source located at Oak Ridge National Laboratory, USA. As a result, presented here are the first angular- and wavelength-dependent data from the POWTEX detector, unfortunately damaged by a 50 g shock but still operating, as well as the efforts made both to characterize the transport damage and to successfully recalibrate the voxel positions in order to yield nonetheless reliable measurements. Also described is the current data reduction process using the PowderReduceP2D algorithm implemented in Mantid [Arnold et al. (2014). Nucl. Instrum. Methods Phys. Res. A , 764 , 156–166]. The final part of the data treatment chain, namely a novel multi-dimensional refinement using a modified version of the GSAS-II software suite [Toby & Von Dreele (2013). J. Appl. Cryst. 46 , 544–549], is compared with a standard data treatment of the same event data conventionally reduced as TOF diffraction patterns and refined with the unmodified version of GSAS-II . This involves both determining the instrumental resolution parameters using POWGEN's powdered diamond standard sample and the refinement of a friendly-user sample, BaZn(NCN) 2 . Although each structural parameter on its own looks similar upon comparing the conventional (1D) and multi-dimensional (2D) treatments, also in terms of precision, a closer view shows small but possibly significant differences. For example, the somewhat suspicious proximity of the a and b lattice parameters of BaZn(NCN) 2 crystallizing in Pbca as resulting from the 1D refinement (0.008 Å) is five times less pronounced in the 2D refinement (0.038 Å). Similar features are found when comparing bond lengths and bond angles, e.g. the two N—C—N units are less differently bent in the 1D results (173 and 175°) than in the 2D results (167 and 173°). The results are of importance not only for POWTEX but also for other neutron TOF diffractometers with large-area detectors, like POWGEN at the SNS or the future DREAM beamline at the European Spallation Source.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ferromagnetism and Carrier Transport in n-type Diluted Magnetic Semiconductors Ge{sub 0.96−x}Bi{sub x}Fe{sub 0.04}Te Thin Film

The structural, Hall effect, electronic transport, and magnetic properties of Ge{sub 0.96−x}Bi{sub x}Fe{sub 0.04}Te epitaxial thin film as prepared by pulsed laser deposition technique were reported. X-ray diffraction patterns including linear scans and phi scans confirmed that all films are high quality epitaxy and crystallinity. With the substitution of high valence Bi for Ge element, we found that the previous carriers of hole were changed to electron, which was testified by the negative slopes obtained from the measurements of Hall effect under different temperatures. The electronic transports show a typical semiconductor behavior and can be understood by the small polaron hopping model because the lattice distortions increase the electron-phonon interaction. An obvious ferromagnetic properties occur in the high Bi-doping Ge{sub 0.64}Bi{sub 0.32}Fe{sub 0.04}Te rather than in that with low Bi-doping concentration, indicating that the ferromagnetic establishment is entirely dependent on carrier’s transmissions. The first-principles calculation performed on this system also reveals that the ferromagnetic state exactly exists in the present n-type diluted magnetic semiconductors with Bi co-dopants.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

SEARCHING FOR SUB-KILOMETER TRANS-NEPTUNIAN OBJECTS USING PAN-STARRS VIDEO MODE LIGHT CURVES: PRELIMINARY STUDY AND EVALUATION USING ENGINEERING DATA

We present a pre-survey study of using the Panoramic Survey Telescope and Rapid Response System (Pan-STARRS) high sampling rate video mode guide star images to search for trans-Neptunian objects (TNOs). Guide stars are primarily used by Pan-STARRS to compensate for image motion and hence improve the point-spread function. With suitable selection of the guide stars within the Pan-STARRS 7 deg{sup 2} field of view, the light curves of these guide stars can also be used to search for occultations by TNOs. The best target stars for this purpose are stars with high signal-to-noise ratio (S/N) and small angular size. In order to do this, we compiled a catalog using the S/N calculated from stars with m{sub V} < 13 mag in the Tycho2 catalog, then cross matched these stars with the Two Micron All Sky Survey catalog, and estimated their angular sizes from (V - K) color. We also outlined a new detection method based on matched filter that is optimized to search for diffraction patterns in the light curves due to occultation by sub-kilometer TNOs. A detection threshold is set to compromise between real detections and false positives. Depending on the theoretical size distribution model used, we expect to find up to a hundred events during the three-year lifetime of the Pan-STARRS-1 project. The high sampling (30 Hz) of the project facilitates detections of small objects (as small as 400 m), which are numerous according to power-law size distribution, and thus allows us to verify various models and further constrain our understanding of the structure in the outer reach of the solar system. We have tested the detection algorithm and the pipeline on a set of engineering data (taken at 10 Hz instead of 30 Hz). No events were found within the engineering data, which is consistent with the small size of the data set and the theoretical models. Meanwhile, with a total of {approx}22 star-hours video mode data (|{beta}| < 10{sup 0}), we are able to set an upper limit of N(>0.5 km) {approx} 2.47 x 10{sup 10} deg{sup -2} at 95% confidence limit.

79 ASTRONOMY AND ASTROPHYSICS↗

Luminescence enhancement by energy transfer in melamine-Y{sub 2}O{sub 3}:Tb{sup 3+} nanohybrids

The phenomenon of luminescence enhancement was studied in melamine-Y{sub 2}O{sub 3}:Tb hybrids. Terbium doped Y{sub 2}O{sub 3} mesoporous nanowires were synthesized by hydrothermal method. X-ray diffraction patterns and Raman scattering spectra testified the realization of a cubic crystal phase. Organic-inorganic melamine-Y{sub 2}O{sub 3}:Tb{sup 3+} hybrid system was successfully obtained by vapour deposition method. Vibration Raman active modes of the organic counterpart were investigated in order to verify the achievement of hybrid system. Photoluminescence excitation and photoluminescence spectra, preformed in the region between 250 and 350 nm, suggest a strong interaction among melamine and Terbium ions. In particular, a remarkable improvement of {sup 5}D{sub 4}→ F{sub J} Rare Earth emission (at about 542 nm) of about 10{sup 2} fold was observed and attributed to an efficient organic-Tb energy transfer. The energy transfer mechanism was studied by the use of time resolved photoluminescence measurements. The melamine lifetime undergoes to a significant decrease when adsorbed to oxide surfaces and it was connected to a sensitization mechanism. The detailed analysis of time decay profile of Terbium radiative recombination shows a variation of double exponential law toward a single exponential one. Its correlation with surface defects and non-radiative recombination was thus discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗