Search NASA⌕ Search

SEARCH · Search NASA

Results for “Dislocation structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

Precipitation of boron in silicon on high-dose implantation

Precipitation of boron implanted in silicon with a dose of 1 x 10{sup 16} cm{sup -2} is studied in relation to the concentration of substitutional boron C{sub B{sub 0}} introduced before implantation and before subsequent annealing at 900 deg. C. It is shown that C{sub B{sub 0}} = 2.5 x 10{sup 20} cm{sup -3} is the critical concentration, at which the formation of precipitates is independent of the concentration of point defects introduced by implantation (far from or close to the mean projected range R{sub p}) and constitutes the prevailing channel of deactivation of boron. At lower concentrations C{sub B{sub 0}} close to the equilibrium concentration, precipitation is observed only far from R{sub p}, in the regions of reduced concentrations of point defects. At the same time, in the region of R{sub p} with a high concentration of point defects, most boron atoms are drawn into clustering with intrinsic interstitial atoms with the formation of dislocation loops and, thus, become electrically inactive as well.

36 MATERIALS SCIENCE↗

Nonequilibrium Diffusional Phase Transformations in Alloys Induced by Migration of Grain Boundaries and Dislocations

The main scenarios of nonequilibrium diffusional transformations induced by moving defects (dislocations, grain boundaries) in alloys under severe plastic deformation are considered. It has been shown that the phase state locally changes in the area of a defect where thermodynamic properties of alloy are locally changed, and the attained state is frozen after the displacement of a defect due to the difference between the rates of bulk diffusion and diffusion on a defect. For this reason, an alloy shifts from the state of its thermodynamic equilibrium under treatment, thus different nonequilibrium states, such as the disordering of alloy, the dissolution of equilibrium phase precipitates, the appearance of nonequilibrium phases, and the formation of regular structures, are possible depending on the type of the system. These effects may take place if the treatment of an alloy is performed at moderate temperatures, when diffusion is frozen in the bulk and rather active on defects. The phenomena of phase and structural instability developing under severe plastic deformation at moderate temperatures are considered within the framework of the proposed model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

In-situ transmission electron microscopy study of oxygen vacancy ordering and dislocation annihilation in undoped and Sm-doped CeO 2 ceramics during redox processes

Ceria (CeO 2 ) based ceramics have been widely used for many applications due to their unique ionic, electronic, and catalytic properties. We report our findings in investigating into the redox processes of undoped and Sm-doped CeO 2 ceramics stimulated by high-energy electron beam irradiation within a transmission electron microscope (TEM). The reduced structure with oxygen vacancy ordering has been identified as the CeO 1.68 (C-Ce 2 O 3+δ ) phase via high-resolution TEM. The reduction of Ce 4+ to Ce 3+ has been monitored by electron energy-loss spectroscopy. The decreased electronic conductivity of the Sm-doped CeO 2 (Sm 0.2 Ce 0.8 O 1.9 , SDC) is revealed by electron holography, as positive electrostatic charges accumulated at the surfaces of SDC grains under electron beam irradiation, but not at CeO 2 grains. The formation of the reduced CeO 1.68 domains corresponds to lattice expansion compared to the CeO 2 matrix. Therefore, the growth of CeO 1.68 nuclei builds up strain inside the matrix, causing annihilation of dislocations inside the grains. By using in-situ high-resolution TEM and a fast OneView camera recording system, we investigated dislocation motion inside both CeO 2 and SDC grains under electron beam irradiation. The dislocations prefer to dissociate into Shockley partials bounded by stacking faults. Then, the partials can easily glide in the {111} planes to reach the grain surfaces. Even the Lomer-Cottrell lock can be swept away by the phase change induced strain field. Our results revealed the high mobility of dislocations inside CeO 2 and SDC grains during their respective redox processes

36 MATERIALS SCIENCE↗

Comparison of hardening and microstructures of ferritic/martensitic steels irradiated with fast neutrons and dual ions

Ferritic/martensitic steels T91 and HT9 were irradiated with neutrons (BOR-60 reactor) and dual ions (9 MeV Fe 3+ and 3.42 MeV energy degraded He 2+ ) from 369 to 520 °C and damage levels of 16.6 to 72 dpa to quantify the possibility of using ion irradiation to simulate neutron irradiation in terms of microstructures and mechanical properties. Nanoindentation testing was performed to obtain the bulk equivalent hardness of the dual-ion irradiated samples. For the neutron irradiated samples, both nanoindentation and Vickers hardness testing were conducted. Transmission Electron Microscopy (TEM) characterizations of the cavities, dislocation loops and precipitates were conducted to account for the strengthening contribution of each microstructure element. The good agreement between the microstructure-predicted (dispersed barrier hardening) and measured strength of the irradiated specimens demonstrated the accuracy of the strengthening model and the nanoindentation tests. Furthermore, the comparison of mechanical property and microstructure changes in ion and neutron irradiated structural materials indicated that ion irradiation replicated many neutron irradiation features. However, a single 70 °C temperature shift is insufficient to match all complex microstructures of neutron vs. ion irradiation over the irradiation temperature range of 369–520 °C.

36 MATERIALS SCIENCE↗

Micromechanical Fields Associated with Irregular Deformation Twins in Magnesium

Understanding and controlling the development of deformation twins is paramount for engineering strong and stable hexagonal close-packed (HCP) Mg alloys. Actual twins are often irregular in boundary morphology and twin crystallography, deviating from the classical picture commonly used in theory and simulation. In this work, the elastic strains and stresses around irregular twins are examined both experimentally and computationally to gain insight into how twins develop and the microstructural features that influence their development. A nanoprecession electron diffraction (N-PED) technique is used to measure the elastic strains within and around a $\left\{ {10\overline{1}2} \right\}$ tensile twin in AZ31B Mg alloy with nm scale resolution. A full-field elasto-viscoplastic fast Fourier transform (EVP-FFT) crystal plasticity model of the same sub-grain and irregular twin structure is employed to understand and interpret the measured elastic strain fields. The calculations predict spatially resolved elastic strain fields in good agreement with the measurement, as well as all the stress components and the dislocation density fields generated by the twin, which are not easily obtainable from the experiment. The model calculations find that neighboring twins, several twin thicknesses apart, have little influence on the twin-tip micromechanical fields. Furthermore, this work reveals that irregularity in the twin-tip shape has a negligible effect on the development of the elastic strains around and inside the twin. Importantly, the major contributor to these micromechanical fields is the alignment of the twinning shear direction with the twin boundary.

36 MATERIALS SCIENCE↗

Overcoming diffusion-related limitations in semiconductor defect imaging with phonon-plasmon-coupled mode Raman scattering

Carrier diffusion is of paramount importance in many semiconductor devices, such as solar cells, photodetectors, and power electronics. Structural defects prevent such devices from reaching their full performance potential. Although a large carrier diffusion length indicates high material quality, it also implies increased carrier depletion by an individual extended defect (for instance, a dislocation) and obscures the spatial resolution of neighboring defects using optical techniques. For commonly utilized photoluminescence (PL) imaging, the spatial resolution is dictated by the diffusion length rather than by the laser spot size, no matter the spot is at or below the diffraction limit. We show how Raman imaging of the LO phonon-plasmon-coupled mode can be used to recover the intrinsic spatial resolution of the optical system, and we demonstrate the effectiveness of the technique by imaging defects in GaAs with diffraction-limited optics, achieving a 10-fold improvement in resolution. Furthermore, by combining Raman and PL imaging, we can independently and simultaneously determine the spatial dependence of the electron density, hole density, radiative recombination rate, and non-radiative recombination rate near a dislocation-like defect, which has not been possible using other techniques.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Pervasive symmetry-lowering nanoscale structural fluctuations in the cuprate La 2−𝑥 ⁢Sr 𝑥 ⁢Cu⁢O 4

The cuprate superconductors are among the most widely studied quantum materials, yet there remain fundamental open questions regarding their electronic properties and the role of structural degrees of freedom. Recent neutron and x-ray scattering measurements uncovered exponential scaling with temperature of the strength of orthorhombic fluctuations in the tetragonal phase of La 2−𝑥⁢ Sr 𝑥 ⁢Cu⁢O 4 and Tl 2 ⁢Ba 2 ⁢Cu⁢O 6+𝛿 , unusual behavior that closely resembles prior results for the emergence of superconducting fluctuations, and that points to a common origin rooted in inherent correlated structural inhomogeneity. Here, in this study, we use neutron and x-ray diffuse scattering to provide further insight into structural fluctuations in La 2−𝑥 ⁢Sr 𝑥 ⁢Cu⁢O 4 . We perform measurements up to temperatures that approach the melting point of the undoped parent compound, and we investigate the effects of in situ in-plane uniaxial elastic stress and plastic deformation. Our neutron scattering results for the parent compound La 2 ⁢Cu⁢O 4 reveal that short-range orthorhombic fluctuations persist to the maximum experimental temperature of nearly 1000 K, i.e., to a significant fraction of the crystallization temperature. At this temperature, the spatial characteristic length extracted from the momentum-space data is still about three lattice constants. The neutron scattering experiment enables quasistatic discrimination and reveals that the response is increasingly dynamic at higher temperatures. We also find that neither compressive elastic stress along the tetragonal [110] direction nor irreversible plastic deformation activating the ⟨100⟩⁢[001] slip system significantly alter the robust orthorhombic fluctuations. Overall, these results support the notion that these fluctuations couple to subtle, underlying inhomogeneity that underpins the cuprate phase diagram. Finally, in La 1.8⁢ Sr 0.2⁢ Cu⁢O 4 , we uncover low-energy structural fluctuations at a nominally forbidden reflection that are distinct from the orthorhombic distortions. While the origin of these fluctuations is not clear, they might be related to the presence of extended defects such as dislocations or stacking faults.

Spieker, R. J. [Univ. of Minnesota, Minneapolis, M↗

Uncertainty Quantification and Management for Multi-scale Nuclear Materials Modeling

Understanding and improving microstructural mechanical stability in metals and alloys is central to the development of high strength and high ductility materials for cladding and cores structures in advanced fast reactors. Design and enhancement of radiation-induced damage tolerant alloys are facilitated by better understanding the connection of various unit processes to collective responses in a multiscale model chain, including: dislocation nucleation, absorption and desorption at interfaces; vacancy production, radiation-induced segregation of Cr and Ni at defect clusters (point defect sinks) in BCC Fe-Cr ferritic/martensitic steels; investigation of interaction of interstitials and vacancies with impurities (V, Nb, Ta, Mo, W, Al, Si, P, S); time evolution of swelling (cluster growth) phenomena of irradiated materials; and energetics and kinetics of dislocation bypass of defects formed by interstitial clustering and formation of prismatic loops, informing statistical models of continuum character with regard to processes of dislocation glide, vacancy agglomeration and swelling, climb and cross slip.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Arc-Fault Primer: Numerical, Analytical, and Experimental Characteristics of Initiation and Sustainment of Arc Plasmas (DRAFT)

While arc-faults are rare in electrical installations, many documented events have led to fires that resulted in significant damage to energy-generation, commercial and residential systems, as well as surrounding structures, in both the United States and abroad. Arc-plasma discharges arise over time due to a variety of reliability issues related to cable material degradation, electrical and mechanical stresses or acute conductive wiring dislocations. These may lead to discontinuity between energized conductors, facilitating arcing events and fires. Arc-flash events rapidly release significant energy in a localized volume, where the electric arc experiences a reduction in resistance. This facilitates a reduction in electrical resistance as the arc temperature and pressure can increase rapidly. Strong pressure waves, electromagnetic interference (EMI), and intense light from an arc pose a threat to electrical worker safety and system equipment. This arc-fault primer provides basic fundamental insight into arc-fault plasma discharges, and an overview of direct current (DC) and alternating current (AC) arc-fault phenomena. This primer also covers pressure waves and EMI arc-fault hazard analyses related to incident energy prediction and potential damage analysis. Mitigation strategies are also discussed related to engineering design and employment of protective devices including arc-fault circuit interrupters (AFCIs). Best practices related to worker safety are also covered, especially as they pertain to electrical codes and standards, particularly Institute of Electrical and Electronics Engineers (IEEE) 1584 and National Fire Protection Agency (NFPA) 70E. Throughout the primer various modelling and test capabilities at Sandia National Laboratories are also covered, especially as they relate to novel methods of arc-fault/arc-flash characterization and mitigation approaches. Herein, this work describes methods for producing and characterizing controlled, sustained arcs at atmospheric pressures as well as methods for mitigation with novel materials.

42 ENGINEERING↗

Investigation of single-layer/multilayer self-assembled InAs quantum dots on GaAs{sub 1-x}Sb{sub x}/GaAs composite substrates

The structure-performance properties of single-layered and multi-layered InAs/GaAs{sub 1−x}Sb{sub x} quantum dot (QD) system, grown by molecular beam epitaxy on GaAs (001) substrates, have been investigated as a function of Sb concentration. Electron microscopy observations showed no significant crystalline defects for the single-layered InAs QDs (Sb 20%). X-ray diffraction analysis revealed that the increase of Sb concentration from 7.3% to 10.2% for the multi-layered QDs increased the strain relaxation from 0% to ∼23% and the dislocation density of GaAsSb layers went up to 3.6 × 10{sup 9 }cm{sup −2}. The peak energy of QD luminescence was red-shifted with increasing Sb concentration due to reduced strain inside QDs. Moreover, the carrier lifetime of the QDs was highly improved from 1.7 to 36.7 ns due to weak hole confinement as the Sb concentration was increased from 7.3% to 10.2%. These structures should be highly promising as the basis for photovoltaic solar-cell applications. Finally, the increased Sb concentration increased the thermal activation energy of electrons confined in the QDs from 163.7 to 206.8 meV, which was indicative of the improved thermal stability with Sb concentration.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Controlling potential barrier height by changing V-shaped pit size and the effect on optical and electrical properties for InGaN/GaN based light-emitting diodes

The internal quantum efficiency (IQE) of InGaN/GaN multiple quantum wells (MQWs) with blue light emission was improved by inserting an InGaN/GaN superlattice (SL) beneath the MQWs. While the SL technique is useful for improving the light-emitting diode (LED) performance, its effectiveness from a multilateral point of view requires investigation. V-shaped pits (V-pits), which generate a potential barrier and screen the effect of the threading dislocation, are one of the candidates for increasing the light emission efficiency of LEDs exceptionally. In this research, we investigated the relationship between the V-pit and SL and revealed that the V-pit diameter is strongly correlated with the IQE by changing the number of SL periods. Using scanning near-field optical microscopy and photoluminescence measurements, we demonstrated the distinct presence of the potential barrier formed by the V-pits around the dislocations. The relationship between the V-pit and the number of SL periods resulted in changing the potential barrier height, which is related to the V-pit diameter determined by the number of SL periods. In addition, we made an attempt to insert pit expansion layers (PELs) composed of combination of SL and middle temperature grown GaN layer instead of only SL structure. As a result of the evaluation of LEDs using SL or PEL, the EL intensity was strongly related to pit diameter regardless of the structures to form the V-pits. In addition, it was clear that larger V-pits reduce the efficiency droop, which is considered to be suppression of the carrier loss at high injection current.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Growth of AlN nanostructure on GaN using MOCVD

Aluminum nitride (AlN) nanowalls have been epitaxially grown on dislocation assisted GaN/Al{sub 2}O{sub 3} template by metal organic chemical vapor deposition (MOCVD) without any help of metal catalysts. A large number of nanowalls with thicknesses of 1.5-2.0 µm and height 400 nm have been deposited. The AlN nanowalls were found to have a preferred c-axis oriented with a hexagonal crystal structure. The AlN nanowalls and GaN/Al{sub 2}O{sub 3} template have been characterize at room temperature photoluminescence (PL) and high resolution X-ray diffraction (HRXRD)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cross slip of extended dislocations in face-centered cubic metals through phase-field modeling

Cross slip is a dislocation mechanism that significantly impacts the mechanical behavior of engineering alloys. Here, in this work, we advance a 3D phase-field dislocation dynamics (PFDD) mesoscale technique to simulate cross slip across a broad range of face-centered cubic (FCC) metals. The formulation incorporates elastic anisotropy, an FCC numerical grid, and a high-fidelity representation of the entire γ -surface from density functional theory for eight FCC metals and no adjustable parameters or rules. The relaxed core structures under zero stress for all metals are predicted to extend in plane. The analytical model for stacking fault width agrees well with the PFDD result under the assumption of elastic isotropy but overestimates it under elastic anisotropy, when the degree of anisotropy is large. The dynamic simulations are designed to elucidate the material parameters that influence the propensity for cross slip. Whether cross slip occurs under a non-Schmid stress or to bypass a hard obstacle, the critical stress to cross slip scales strongly with the anisotropic energy coefficient for a screw dislocation.

36 MATERIALS SCIENCE↗

Fundamental Studies and Development of III-N Visible LEDs for High-Power Solid-State Lighting Applications

The goal of this program is to understand in a fundamental way the impact of strain, defects, polarization, and Stokes loss in relation to unique device structures upon the internal quantum efficiency (IQE) and efficiency droop (ED) of III-nitride (III-N) light-emitting diodes (LEDs) and to employ this understanding in the design and growth of high-efficiency LEDs capable of highly-reliable, high-current, high-power operation. This knowledge will be the basis for our advanced device epitaxial designs that lead to improved device performance. The primary approach we will employ is to exploit new scientific and engineering knowledge generated through the application of a set of unique advanced growth and characterization tools to develop new concepts in strain-, polarization-, and carrier dynamics-engineered and low-defect materials and device designs having reduced dislocations and improved carrier collection followed by efficient photon generation. We studied the effects of crystalline defect, polarizations, hole transport, electron-spillover, electron blocking layer, underlying layer below the multiplequantum- well active region, and developed high-efficiency and efficiency-droop-mitigated blue LEDs with a new LED epitaxial structure. We believe new LEDs developed in this program will make a breakthrough in the development of high-efficiency high-power visible III-N LEDs from violet to green spectral region.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Spectral neighbor analysis method for automated generation of quantum-accurate interatomic potentials

We present a new interatomic potential for solids and liquids called Spectral Neighbor Analysis Potential (SNAP). The SNAP potential has a very general form and uses machine-learning techniques to reproduce the energies, forces, and stress tensors of a large set of small configurations of atoms, which are obtained using high-accuracy quantum electronic structure (QM) calculations. The local environment of each atom is characterized by a set of bispectrum components of the local neighbor density projected onto a basis of hyperspherical harmonics in four dimensions. The bispectrum components are the same bond-orientational order parameters employed by the GAP potential [1]. The SNAP potential, unlike GAP, assumes a linear relationship between atom energy and bispectrum components. The linear SNAP coefficients are determined using weighted least-squares linear regression against the full QM training set. This allows the SNAP potential to be fit in a robust, automated manner to large QM data sets using many bispectrum components. The calculation of the bispectrum components and the SNAP potential are implemented in the LAMMPS parallel molecular dynamics code. We demonstrate that a previously unnoticed symmetry property can be exploited to reduce the computational cost of the force calculations by more than one order of magnitude. We present results for a SNAP potential for tantalum, showing that it accurately reproduces a range of commonly calculated properties of both the crystalline solid and the liquid phases. In addition, unlike simpler existing potentials, SNAP correctly predicts the energy barrier for screw dislocation migration in BCC tantalum.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Quantitative assessment of carbon allocation anomalies in low temperature bainite

Low temperature bainite is a mixture of ferrite and austenite with a high dislocation density and nanoscale precipitates produced by isothermal transformation of the austenite in high-carbon high-silicon steels. The mass balance for carbon is systematically unsuitable when considering only ferrite and austenite forming the structure, but no attempt has been made to evaluate the amount of carbon located at linear defects and precipitates. Additionally, bainitic ferrite has been recently shown to have a tetragonal crystal structure, allowing greater amounts of carbon in solid solution than those expected by the paraequilibrium phase boundaries. In order to quantify the contribution of all the carbon sinks, we have followed the evolution of carbon in ferrite and austenite, along with the precipitation of cementite and η–carbide, during the isothermal bainitic transformation at 220 and 250 °C by means of in-situ synchrotron high energy X-ray diffraction and complementary transmission electron microscopy (TEM) and atom probe tomography (APT) analyses. Furthermore, this is the first time that the mass balance for carbon is successfully achieved by considering all the transformation products together with an estimation of the carbon segregated to linear defects.

36 MATERIALS SCIENCE↗

Generation of nanocrystalline surface layer in short pulse laser processing of metal targets under conditions of spatial confinement by solid or liquid overlayer

The effect of spatial confinement by a solid or liquid overlayer on short pulse laser-induced surface microstructure modification is investigated in a series of large-scale atomistic simulations performed for Ag targets irradiated in the regime of melting and resolidification, below the thresholds for laser spallation and ablation. For Ag targets with free surfaces, the formation of a nanocrystalline region with random crystallographic grain orientation is observed under irradiation conditions leading to the generation of numerous sub-surface voids that slow down the solidification process. When no voids are generated, the resolidification produces grains misoriented with respect to the bulk of the target by just several degrees and separated from each other by low angle grain boundaries or dislocation walls. The presence of a liquid or solid overlayer suppresses nucleation of sub-surface voids, provides an additional pathway for cooling through the heat conduction to the overlayer, and facilitates the formation of nanocrystalline structure in a region of the metal target adjacent to the overlayer. Moreover, the stabilizing effect of the solid overlayer may result in an incomplete melting of metal in the vicinity of the interface, making it possible for grains growing from the interface to retain “memory” of the target orientation and to produce nanocrystalline interfacial region with small misorientation of grains with respect to the bulk of the target. In all simulations, the nanocrystalline layers generated by laser processing of single crystal Ag targets are characterized by a high density of stacking faults, twin boundaries, and point defects produced in the course of the rapid resolidification.

Chemistry↗