Search NASA⌕ Search

SEARCH · Search NASA

Results for “FLUID MEASUREMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

Synchrotron-radiation-based determination of Xe L-subshell Coster-Kronig yields: A reexamination via high-resolution x-ray spectroscopy

The xenon L-subshell Coster-Kronig (CK) transition yields were revisited via high-resolution measurements of the Lalpha{sub 1,2} (L{sub 3}-M{sub 4,5}) and Lbeta{sub 1} (L{sub 2}-M{sub 4}) x-ray emission lines. The L x-ray spectra were measured employing a Johansson-type curved crystal spectrometer and energy-tunable synchrotron radiation. The CK yields were derived from the relative L x-ray intensity jumps at the L edges by fitting the fluorescence intensities as a function of the photon energy to the L-subshell photoionization cross sections. The latter were obtained from the measured L-edge photoabsorption spectrum. Values of 0.118+-0.029, 0.383+-0.037, and 0.096+-0.016 were found for the f{sub 23}, f{sub 13}, and f{sub 12} CK yields, respectively. Thanks to high resolution, the L{sub 1} fluorescence yield of 0.059+-0.002 was also determined from intensity ratios of the well-resolved Lbeta{sub 4} (L{sub 1}-M{sub 2}) and Lbeta{sub 1} (L{sub 2}-M{sub 4}) lines.

74 ATOMIC AND MOLECULAR PHYSICS↗

Oscillations of a standing shock wave generated by the Richtmyer-Meshkov instability

In a typical Richtmyer-Meshkov experiment a fast moving flat shock strikes a stationary perturbed interface between fluids A and B creating a transmitted and a reflected shock, both of which are perturbed. We propose shock tube experiments in which the reflected shock is stationary in the laboratory. Such a standing perturbed shock undergoes well-known damped oscillations. We present the conditions required for producing such a standing shock wave, which greatly facilitates the measurement of the oscillations and their rate of damping. We define a critical density ratio R critical , in terms of the adiabatic indices of the two fluids, and a critical Mach number M critical s of the incident shock wave, which produces a standing reflected wave. If the initial density ratio R of the two fluids is less than R critical then a standing shock wave is possible at M s =M critical s . Otherwise a standing shock is not possible and the reflected wave always moves in the direction opposite the incident shock. Examples are given for present-day operating shock tubes with sinusoidal or inclined interfaces. We consider the effect of viscosity, which affects the damping rate of the oscillations. Furthermore, we point out that nonlinear bubble and spike amplitudes depend relatively weakly on the viscosity of the fluids and that the interface area is a better diagnostic.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Insulator-to-Conducting Transition in Dense Fluid Helium

By combining diamond-anvil-cell and laser-driven shock wave techniques, we produced dense He samples up to 1.5 g/cm{sup 3} at temperatures reaching 60 kK. Optical measurements of reflectivity and temperature show that electronic conduction in He at these conditions is temperature-activated (semiconducting). A fit to the data suggests that the mobility gap closes with increasing density, and that hot dense He becomes metallic above {approx}1.9 g/cm{sup 3}. These data provide a benchmark to test models that describe He ionization at conditions found in astrophysical objects, such as cold white dwarf atmospheres.

79 ASTRONOMY AND ASTROPHYSICS↗

Spray Pyrolysis-Aerosol Deposition for the Production of Thick Yttria-Stabilized Zirconia Coatings

Aerosol deposition (AD) is a coating technique wherein particles are impacted onto a target substrate at reduced pressures, and supersonic particle impact velocities lead to coating consolidation. The limiting step in AD application is often not supersonic deposition operation, but aerosolization of powder particles with the proper size distribution; the translational impact velocity is strongly size-dependent. It is demonstrated that by directly synthesizing particles in the gas phase, size-controlled ceramic particles can be injected into AD systems. This in situ formation step obviates the need for particle aerosolization. Ultrasonic spray pyrolysis (USP) is applied to produce yttria-stabilized zirconia (YSZ), and USP is directly coupled with AD to produce consolidated, thick, YSZ coatings on metal substrates. USP-AD yields YSZ coatings on stainless steel and aluminum substrates with porosities <0.20, which grow to thicknesses beyond 100 μm. Aerodynamic particle spectrometry and electron microscopy reveal that the depositing particles are 200 nm–1.2 μm in diameter, though each particle is composed of nanocrystalline YSZ. Supporting computational fluid dynamics calculations demonstrate that the YSZ particle impact speeds are above 300 m s -1 . Thermal conductivity measurements demonstrate that USP-AD coatings have conductivities consistent with those produced from high-temperature processes.

36 MATERIALS SCIENCE↗

Permeability Evolution of Fractures in Shale in the Presence of Supercritical CO 2

We experimentally examined the impact of supercritical carbon dioxide (scCO 2 ) on fracture permeability and fracture surface characteristics in shales of various compositions. We measured permeability and fracture normal displacement at different effective stresses using both argon and scCO 2 as pore fluids. Both natural fractures and saw cuts in intact samples were used in our study. The permeability and fracture normal displacement decrease after multiple loading/unloading cycles, apparently as the result of inelastic compaction. In samples with high carbonate content, we observe an increase in permeability and fracture surface degradation after more than 3.5 days of exposure to scCO 2 , apparently due to carbonate dissolution. We demonstrate that the sensitivity of permeability to effective normal stress correlates well with the fracture normal displacement. The dependence of permeability on effective normal stress increases after exposure to scCO 2 as the fracture surface became more compliant.

58 GEOSCIENCES↗

Implementation of extreme ultraviolet spectroscopy on a sheared-flow-stabilized Z pinch

A diagnostic for extreme ultraviolet spectroscopy was fielded on the sheared-flow-stabilized (SFS) fusion Z-pinch experiment (FuZE-Q) for the first time. The spectrometer collected time-gated plasma emission spectra in the 5–40 nm wavelength (30–250 eV) range for impurity identification, radiative power studies, and for plasma temperature and density measurements. The unique implementation of the diagnostic included fast (10 ns risetime) pulsed high voltage electronics and a multi-stage differential pumping system that allowed the vacuum-coupled spectrometer to collect three independently timed spectra per FuZE-Q shot while also protecting sensitive internal components. Analysis of line emission identifies oxygen (N-, C-, B-, Be-, Li-, and He-like O), peaking in intensity shortly after maximum current (>500 kA). This work provides a foundation for future high energy spectroscopy experiments on SFS Z-pinch devices.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Thermo-Mechanical Distortion of Tungsten-Coated Steel During High Heat Flux Testing Using Plasma Arc Lamps

An experimental setup and a test section were designed and fabricated for high heat flux testing (HHFT) of neutron-irradiated specimens using water-wall plasma arc lamps. Because of the radiological considerations and limitations of reactor irradiation, the size of the test articles was limited to disks less than 10 mm in diameter. The specimen was clamped onto an actively cooled block, and clamping allowed the insertion of several thermocouples on the back surface of the specimen through a copper (Cu) block. Five vacuum plasma sprayed tungsten (W)–coated F82H steel specimens were subjected to HHFT. Surface profilometry measurements, which were conducted after HHFT, revealed central bowing of the top W surface. This type of residual distortion occurred for all of the specimens, and the larger the specimens were, the larger was the distortion.In an attempt to understand specimen distortion and address the science questions related to the testing of subsize specimens during HHFT, a simplified thermo-mechanical model was developed. By using a measured temperature in the Cu as an isothermal boundary condition, the model eliminated the need for coupling cooling fluid flow models with stress models, greatly simplifying the analysis. The main variable in the proposed model is hC, i.e., the thermal contact conductance between the F82H and the Cu washer. Inelastic properties, including hardening properties, were considered for F82H steel and Cu. Numerical simulation results demonstrated a buildup of residual deformation during HHFT and a very complex state of stress and deformation during typical heat flux (HF) cycling. Additionally, hoop stress evolution during a high heat flux cycle reveals that F82H at an interface with W would be mainly in compression during HF application and experienced a transition to a tension state during cooldown. Also, specimen distortion evolves during each HF cycle, as the specimen bows downward during HF application and upward during the cooldown period between HF cycles. The final specimen distortion, i.e., upward bowing of the specimen center, was qualitatively predicted for hC values of 4000 to 5000 W/(m 2 ·K). This hC range of values, for which bulging is obtained, is at the lower spectrum of the range of values for hC, consistent with the low thermal contact conductance expected from the unpolished F82H surface.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

GRAVITATIONAL RADIATION FROM HYDRODYNAMIC TURBULENCE IN A DIFFERENTIALLY ROTATING NEUTRON STAR

The mean-square current quadrupole moment associated with vorticity fluctuations in high-Reynolds-number turbulence in a differentially rotating neutron star is calculated analytically, as are the amplitude and decoherence time of the resulting, stochastic gravitational wave signal. The calculation resolves the subtle question of whether the signal is dominated by the smallest or largest turbulent eddies: for the Kolmogorov-like power spectrum observed in superfluid spherical Couette simulations, the wave strain is controlled by the largest eddies, and the decoherence time approximately equals the maximum eddy turnover time. For a neutron star with spin frequency nu{sub s} and Rossby number Ro, at a distance d from Earth, the root mean square wave strain reaches h{sub rms} approx 3 x 10{sup -24} Ro{sup 3}(nu{sub s}/30 Hz){sup 3}(d/1 kpc){sup -1}. Ordinary rotation-powered pulsars (nu{sub s} approx< 30 Hz, Ro approx< 10{sup -4}) are too dim to be detected by the current generation of long-baseline interferometers. Millisecond pulsars are brighter; for example, an object born recently in a Galactic supernova or accreting near the Eddington rate can have nu{sub s} approx 1 kHz, Ro approx> 0.2, and hence h{sub rms} approx 10{sup -21}. A cross-correlation search can detect such a source in principle, because the signal decoheres over the timescale tau{sub c} approx 1 x 10{sup -3} Ro{sup -1}(nu{sub s}/30 Hz){sup -1} s, which is adequately sampled by existing long-baseline interferometers. Hence, hydrodynamic turbulence imposes a fundamental noise floor on gravitational wave observations of neutron stars, although its polluting effect may be muted by partial decoherence in the hectohertz band, where current continuous-wave searches are concentrated, for the highest frequency (and hence most powerful) sources. This outcome is contingent on the exact shape of the turbulent power spectrum, which is modified by buoyancy and anisotropic global structures, such as stratified boundary layers, in a way that is understood incompletely even in laboratory situations.

79 ASTRONOMY AND ASTROPHYSICS↗

MODE IDENTIFICATION OF MHD WAVES IN AN ACTIVE REGION OBSERVED WITH HINODE/EIS

In order to better understand the possibility of coronal heating by MHD waves, we analyze Fe XII 195.12A data observed with the EUV Imaging Spectrometer on board Hinode. We performed a Fourier analysis of EUV intensity and Doppler velocity time series data in the active region corona. Notable intensity and Doppler velocity oscillations were found for two moss regions out of the five studied, while only small oscillations were found for five apexes of loops. The amplitudes of the oscillations were 0.4%-5.7% for intensity and 0.2-1.2 km s{sup -1} for Doppler velocity. In addition, oscillations of only the Doppler velocity were seen relatively less often in the data. We compared the amplitudes of intensity and those of Doppler velocity in order to identify MHD wave modes and calculated the phase delays between Fourier components of intensity and those of Doppler velocity. The results are interpreted in terms of MHD waves as follows: (1) few kink modes or torsional Alfven mode waves were seen in both moss regions and the apexes of loops, (2) upwardly propagating and standing slow mode waves were found in moss regions, and (3) consistent with previous studies, estimated values of energy flux of the waves were several orders of magnitude lower than that required for heating active regions.

79 ASTRONOMY AND ASTROPHYSICS↗

Saturation amplitude of the f-mode instability

We investigate strong nonlinear damping effects which occur during high amplitude oscillations of neutron stars, and the gravitational waves they produce. For this, we use a general relativistic nonlinear hydrodynamics code in conjunction with a fixed spacetime (Cowling approximation) and a polytropic equation of state (EOS). Gravitational waves are estimated using the quadrupole formula. Our main interest are l=m=2 f modes subject to the CFS (Chandrasekhar, Friedman, Schutz) instability, but we also investigate axisymmetric and quasiradial modes. We study various models to determine the influence of rotation rate and EOS. We find that axisymmetric oscillations at high amplitudes are predominantly damped by shock formation, while the nonaxisymmetric f modes are mainly damped by wave breaking and, for rapidly rotating models, coupling to nonaxisymmetric inertial modes. From the observed nonlinear damping, we derive upper limits for the saturation amplitude of CFS-unstable f modes. Finally, we estimate that the corresponding gravitational waves for an oscillation amplitude at the upper limit should be detectable with the advanced LIGO (Laser Interferometer Gravitational Wave Observatory) and VIRGO interferometers at distances above 10 Mpc. This strongly depends on the stellar model, in particular, on the mode frequency.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Wastewater Disposal Has Not Significantly Altered the Regional Stress State in Southern Kansas

Wastewater disposal is primarily responsible for the increased seismicity rate since ~2013 in southern Kansas. Previous work that used shear-wave splitting (SWS) in southern Kansas interpreted an ~90° temporal rotation in the fast polarization direction and attributed it to increased pore pressures resulting from fluid injection. However, this interpreted rotation coincided with a change in the stations used to make the SWS measurements. We investigate the temporal variability of fast azimuths in southern Kansas by making SWS measurements on earthquake families with similar source–receiver paths recorded on a stable local seismic network. We select high-quality SWS measurements by investigating the stability of results across 65 different frequency bands between 0.5 and 15 Hz. We find that the fast polarization direction in southern Kansas is relatively constant with an average east-northeast (~N79°E) orientation between 2014 and 2017. Our fast polarization measurements are primarily a reflection of the maximum principal horizontal stress direction (SHmax). We observe a slight spatial change in SHmax to the northeast (~N55°E) near the Nemaha ridge in Oklahoma. However, we do not observe any significant temporal rotation of SHmax or variation in delay time (i.e., crack density) in southern Kansas, contrary to the earlier study. The previously interpreted ~90° rotation may either be a reflection of a very local stress change or a misinterpretation of SWS results potentially due to the use of inconsistent source–receiver paths. Our SWS measurements cover the period of peak wastewater disposal and seismicity rates and suggest an absence of significant temporal rotations in the local anisotropy and stress orientations associated with wastewater disposal.

Geochemistry & Geophysics↗

Preliminary Design Study for an Eddy Current Flow Meter for Versatile Test Reactor

The eddy current flow meter (ECFM) serves the purpose of monitoring velocities and temperatures of conductive liquid coolant surrounding nuclear reactor cells. The ECFM can also detect voids in two-phase liquid metal flows. Measurement of this flow in reactor cells can greatly improve the accuracy of the empirical formulas used for fluid dynamics near the reactor core, as well as, aid in mapping any non-uniformities in fluid flow, its temperature estimation and phase. With modeling and experimental verification, an extensible ECFM for multiple facilities and environments can lead to an understanding of the liquid coolant flow; while saving cost of calibration and development. This can be done by characterizing the ECFM performance based on its parameters and then optimizing a sensor for a given use case. Simulation results using an ECFM and an aluminum rod medium are presented and discussed herein. Additionally, liquid metal simulations for Mercury and Galinstan will compare the ECFM behavior for different liquid velocities and excitation frequencies. After sensor calibration curves are generated and experimentally verified, ECFMs can be developed and deployed using the model introduced.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Heat Transfer of Supercritical Carbon Dioxide in 3D-Printed Tubes with Internal Ribs and Yttria Stabilized Zirconia Coating

This technical report describes measurements performed in NETL’s Heat Exchanger Experimental Test (HEET) facility using supercritical carbon dioxide as the working fluid. 3D printed tubes with internal ribs and yttria stabilized zirconia (YSZ) exterior coatings were employed in the heat exchanger. Heat transfer and friction factor enhancements from the internal ribs were characterized over a range of flow conditions. Additionally, the thermal resistance from the YSZ coating was characterized for both a freshly applied coating and a coating subjected to thermal aging.

36 MATERIALS SCIENCE↗

SULI Report - Development of a Molten Salt Circulation Loop for in-situ Spectroscopy

This project supports the development of real time optical monitoring capabilities for molten salt reactor (MSR) environments by designing, testing, and refining a molten salt circulation loop suitable for combined laser induced breakdown spectroscopy (LIBS) and ultraviolet visible (UV Vis) absorption measurements. Online spectroscopic monitoring is increasingly important for nuclear safeguards, corrosion tracking, and material accountancy, yet MSR process fluids present substantial challenges due to their chemical complexity and hazards such as high temperatures and radiation. To address these needs, this work focuses on Phase I, the development of a room temperature aqueous circulation loop that serves as a surrogate platform for evaluating flow behavior, optical access, and component performance prior to high temperature salt operation. Initial testing identified several practical issues—including leaks, obstructions, and two-phase flow through the absorption cell—that were systematically resolved through hardware replacement, flow path redesign, and venturi pressure optimization. Relocating the flow cell upstream of the primary venturi enabled periods of stable single-phase flow, demonstrating the feasibility of integrating optical diagnostics into a circulation system. The results of Phase I provide essential design insight for Phase II, which will incorporate furnace compatible materials and LiCl KCl eutectic salt. Completion of the molten salt system will deliver a reusable testbed for evaluating multimodal spectroscopic techniques, advancing nondestructive, real time monitoring tools for future MSR and nuclear fuel cycle applications.

98 - NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL↗

Relativistic Hydrodynamics with Wavelets

Methods to solve the relativistic hydrodynamic equations are important in a large number of astrophysical simulations, which may be very dynamic and involve multiscale features. This requires computational methods that are highly adaptive and capable of automatically resolving numerous localized features and instabilities that emerge across the computational domain and over many temporal scales. While this has been historically accomplished with adaptive-mesh-refinement-based methods, alternatives using wavelet bases and the wavelet transformation have recently achieved significant success in adaptive representation for advanced engineering applications. The current work presents a new method, extending the wavelet adaptive multiresolution representation method, for the integration of the relativistic hydrodynamic equations using iterated interpolating wavelets and introduces a highly adaptive implementation for multidimensional simulation. We note the wavelet coefficients provide a direct measure of the local approximation error for the solution and place collocation points that naturally adapt to the fluid flow while providing good conservation of fluid quantities. The resulting implementation, OAHU , is applied to a series of demanding 1D and 2D problems that explore high Lorentz factor outflows and the formation of several instabilities, including the Kelvin–Helmholtz instability and the Rayleigh–Taylor instability.

79 ASTRONOMY AND ASTROPHYSICS↗

Electron density analysis of the effects of sugars on the structure of lipid bilayers at low hydration - a preliminary study

Small angle X-ray scattering is used to study the effects of sugars on membranes during dehydration. Previous work has shown that the bilayer and chain-chain repeat spacings of DPPC bilayers are relatively unaffected by the presence of sugars. In this work we present a preliminary analysis of the electron density profiles of DPPC in the presence of sugars at low hydration. The difficulties of determining the correct phasing are discussed. Sugars and other small solutes have been shown to have an important role in improving the tolerance of a range of species to desiccation and freezing. In particular it has been shown that sugars can stabilize membranes in the fluid membrane phase during dehydration, and in the fully dehydrated state. Equivalently, at a particular hydration, the presence of sugars lowers the transition temperature between the fluid and gel phases. There are two competing models for explaining the effects of sugars on membrane phase transition temperatures. One, designated the water replacement hypothesis (WRH) states that sugars hydrogen bond to phospholipid headgroups, thus hindering the fluid-gel phase transition. One version of this model suggests that certain sugars (such as trehalose) achieve the measured effects by inserting between the phospholipid head groups. An alternative model explains the observed effects of sugars in terms of the sugars effect on the hydration repulsion that develops between opposing membranes during dehydration. The hydration repulsion leads to a lateral compressive stress in the bilayer which squeezes adjacent lipids more closely together, resulting in a transition to the gel phase. When sugars are present, their osmotic and volumetric effects reduce the hydration repulsion, reduce the compressive stress in the membranes, and therefore tend to maintain the average lateral separation between lipids. This model is called the hydration forces explanation (HFE). We recently showed that neither mono- nor di-saccharides affect the average distance between lipid chains in the bilayer, supporting the predictions of the HFE. In this paper we further investigate the effects of sugars on membrane structure by conducting electron density analysis of recent data. This preliminary analysis sheds additional light onto the effects of sugars on membrane structure.

08 HYDROGEN↗

Finding MP and CP using ultrasonic velocity profile on rectangular twin jets

Geometry similar to the parallel rectangular jets is found in next generation nuclear reactors, such as the sodium-cooled fast reactor. This type of configuration is located in the lower plenum, where flows entering from rectangular openings with similar spacing mix and interact. Understanding the mixing and characteristics of the flow is important for various safety purposes and simulation verification. The purpose of this experiment is to use the UVP (Ultrasonic Velocity Profiler) to find the characteristics and regions of two parallel twin jets mixing underwater. An issue with using PIV, particle image velocimetry, occurs when the fluid is opaque and the particles are undetected by a camera. This is where UVP could obtain data since it uses ultrasonic waves without dependence on the visibility of the medium. It can be used with fluids such as liquid metals for flow visualization and obtain an instantaneous velocity profile. Unlike PIV, UVP requires measurements at different locations which are not taken simultaneously, unless various probes and different locations are used. The present work will only take a look at finding the merging point (MP) and combining point (CP) within the flow, which will be compared to values previously obtained by Wang et al.. Previous work done with UVP by Wiggins and Ruggles compared the velocity vector magnitude and location within the flow with PIV. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Density wavenumber spectrum measurements, synthetic diagnostic development, and tests of quasilinear turbulence modeling in the core of electron-heated DIII-D H-mode plasmas

Abstract Measurements of the turbulent density wavenumber spectrum, δ n ˆ e ( k ⊥ ) , using the Doppler Back-Scattering (DBS) diagnostic are reported from DIII-D H-mode plasmas with electron cyclotron heating as the only auxiliary heating method. These electron-heated plasmas have low collisionality, ν e ∗ < 1 , T e / T i > 1 , and zero injected torque—a regime expected to be relevant for future fusion devices. We probe density fluctuations in the core ( ρ ≈ 0.7) over a broad wavenumber range, 0.5 ⩽ k ⊥ ⩽ 16 cm −1 ( 0.1 ⩽ k ⊥ ρ s ⩽ 5 ), to characterize plasma instabilities and compare with theoretical predictions. We present a novel synthetic DBS diagnostic to relate the back-scattered power spectrum, P s ( k ⊥ ) —which is directly measured by DBS—to the underlying electron density fluctuation spectrum, δ n ˆ e ( k ⊥ ) . The synthetic DBS P s ( k ⊥ ) spectrum is calculated by combining the SCOTTY beam-tracing code with a model δ n ˆ e ( k ⊥ ) predicted either analytically or numerically. In this work we use the quasi-linear code Trapped Gyro-Landau Fluid (TGLF) to approximate the δ n ˆ e ( k ⊥ ) spectrum. We find that TGLF, using the experimental profiles, is capable of closely reproducing the DBS measurements. Both the DBS measurements and the TGLF-DBS synthetic diagnostic show a wavenumber spectrum with variable decay. The measurements show weak decay ( k −0.6 ) for k < 3.5 cm −1 , with k −2.6 at intermediate- k ( 3.5 ⩽ k ⩽ 8.5 cm −1 ), and rapid decay ( k −9.4 ) for k > 8.5 cm −1 . Scans of physics parameters using TGLF suggest that the normalized ∇ T e scale-length, R / L T e , is an important factor for distinguishing microturbulence regimes in these plasmas. A combination of DBS observations and TGLF simulations indicate that fluctuations remain peaked at ITG-scales (low k ) while R / L T e -driven TEM/ETG-type modes (intermediate/high k ) are marginally sub-dominant.

synthetic diagnostics↗