Search NASA⌕ Search

SEARCH · Search NASA

Results for “Methods in superconductivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

Origin of the Magnetism in Undoped and Mn-Doped In{sub 2}O{sub 3}: A First-Principles Study

The magnetism of undoped and Mn-doped In{sub 2}O{sub 3} has been investigated by employing density functional calculations. For undoped In{sub 2}O{sub 3}, a neutral In vacancy in In{sub 2}O{sub 3} leads to the formation of a net moment of 3 μ{sub B}, which originates from the strong spin polarization of 2p orbitals of O atoms. While, Mn-doped In{sub 2}O{sub 3} system shows robust ferromagnetism which can be attributed to the p-d hybridization between Mn and their neighboring O atoms. In addition, because two O atoms between the two Mn atoms are removed, the ground state of the system have a transformation from the ferromagnetic to the antiferromagnetic state, which further demonstrates that the ferromagnetism is mediated through the p-d interaction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhanced Magnetoresistance in In-Plane Monolayer MoS{sub 2} with CrO{sub 2} Electrodes

Magnetoresistance of monolayer MoS{sub 2} is reported to increase when used in in-plane configuration with CrO{sub 2} half-metal ferromagnet (HMF) electrodes. Density functional theory (DFT)- and non-equilibrium Green’s function (NEGF)-based simulations show that high magnetoresistance (MR) values of ∼860% can be achieved in in-plane monolayer MoS{sub 2} with CrO{sub 2} electrodes, which is much higher than the MR value of ∼300% for nine-layer and the MR value of ∼70% for single-layer out-of-plane MoS{sub 2} reported in Dolui et al., Phys. Rev. B 90(R), 041401 (2014) past by other researchers. High spin-injection efficiency ∼100% is also obtained at high bias voltages. High MR and perfect spin filtration suggests the importance of this configuration in spintronics applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic Properties and Lattice Dynamics Studies of the Nickel-Based Superconductor ThNiAsN

We perform theoretical studies of the newly discovered nickel-based pnictide ThNiAsN. The obtained large density of states may explain the normal-state Sommerfeld coefficient observed by former experiments. The obtained band structure and Fermi surfaces are rather two-dimensional with a small hole-like Fermi surface around X point and three electron-like ones around M point, which share great similarities with LaNiAsO. Meanwhile, the lattice dynamics of ThNiAsN are also studied within density functional perturbation theory (DFPT). The electron-phonon coupling constant is 0.67, suggesting that ThNiAsN is a phonon-mediated superconductor. In the end, as a prototype of nickel-based superconductor, we obtain an effective tight-binding model by means of the maximally localized Wannier function (MLWF). Based on this model, the nesting properties have been studied using Lindhard function for nominal doping and hole doping. We find the hole doping will introduce better nesting properties, making this system a potential candidate to develop magnetic and unconventional superconducting instabilities.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Effect of Oxygen Adsorption for Vacancy-Induced d{sup 0} Magnetism in HfO{sub 2} (110) Surface

Based on the density functional theory, we investigated the electronic structures and magnetic properties of the oxygen adsorption on the defective cubic HfO{sub 2} (110) surface. The adsorption capacities of the perfect and defective surfaces follow in the sequence as: oxygen-deficient model >perfect surface >hafnium-deficient model. When the oxygen molecules adsorb on the nonmagnetic perfect HfO{sub 2} surface, the system has a local magnetic moment and the antiferromagnetic coupling is more stable. For the defective cubic HfO{sub 2} (110) surface, it is found that the oxygen vacancy is more easy to form than the hafnium vacancy by comparing the vacancy formation energy. And the hafnium vacancy could induce a large magnetic moment while the oxygen vacancy alone could not. After adsorption of the oxygen molecule, the nonmagnetic oxygen-deficient HfO{sub 2} model is transformed into the magnetic surface. On the contrary, the introduction of adsorbed oxygen molecule causes the magnetic moment of hafnium-deficient HfO{sub 2} surface to reduce. Additionally, if the oxygen molecules adsorb on the defective HfO{sub 2} (110) surface, the ferromagnetic coupling is energetically favorable.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ferromagnetism in (X, Y)-Codoped 4H-GaN Polytype X = Na and Mg, Y = Na and Mg: Ab Initio Study

In this work, the magnetic behavior of 4H-GaN polytype codoped with (X = Na and Mg, Y = Na and Mg) is studied by means of first-principle calculations based on spin-density functional theory within the generalized-gradient approximation. It is found that the most stable configuration reveals the smallest cohesion energy and the X–Y bond length is minimal. (X, Y )-codoped 4H-GaN reveals magnetism behavior, and the total magnetic moment comes mainly from the N host atoms. Interestingly, (Na, Na)-codoped 4H-GaN is found to be half-metallic ferromagnetic with a magnetic moment of 4 μ{sub B}. Results show also that (Mg, Na)- and (Na, Mg)-codoped 4H-GaN are found to be nearly half-metallic ferromagnetic with a magnetic moment of 2.96 and 2.97 μ{sub B}, respectively. Whereas (Mg, Mg)-codoped 4H-GaN have a metallic ferromagnetic behavior with a magnetic moment of 1.87 μ{sub B}. The partial density of states denotes that magnetism is achieved through a p-p-like coupling between the impurity X-2p states of X atom, Y-2p states of Y atom, and N-2p states of N host atoms. These theoretical results make Na–Na-codoped 4H-GaN very promising materials for spintronic technology.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrical, Structural, and Thermal Properties of Ferrite/Superconductor (Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4}){sub x}/YBa{sub 2}Cu{sub 3}O{sub 7-δ}) Nanocomposite Materials

The superconductor YBa{sub 2}Cu{sub 3}O{sub 7-δ} (Y123) is prepared by the solid-state route, while the nanosized Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} (Ni-Zn ferrite) is synthesized via citric acid sol-gel technique. The composite material of the type (Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4}){sub x}/YBa{sub 2}Cu{sub 3}O{sub 7-δ}, where x = 0.00, 0.03, 0.10, and 0.50 wt%, is prepared by a modified solid-state method to study the effect of doping Ni-Zn nanosized ferrite on the superconducting, structure, and thermal properties of Y123. The prepared samples show Meissner effect which confirmed the presence of superconducting phase at liquid nitrogen temperature (77 K). The prepared samples have been characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersion of X-ray (EDX), infra-red (IR) spectroscopy, thermogravimetric analysis (TGA), vibrating sample magnetometer (VSM), DC resistance by four-probe, and critical current density measurements. It was found that by increasing Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} nanoparticles in the Y123 compound, the unit cell volume of the orthorhombic phase decreases, but the transition temperature T{sub c} and critical current density J{sub c} decrease for low doping (x = 0.03 wt%) then increase (x = 0.10 and 0.50 wt%) for Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} doped in Y123. The transport properties of the (Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4}){sub x}/YBa{sub 2}Cu{sub 3}O{sub 7}-{sub δ} composite as electrical resistance R, T{sub c}, and J{sub c} are interpreted according to Bean’s critical state model and charge-vortex interaction combined with vortex pinning in Y123 high-T{sub c} mixed-state type-II superconductor. Highlights: The critical current density J{sub c} decreased for low doping of nanosized Ni-Zn ferrite into Y123 with ratio of 0.03 wt% and increased by increasing doping ratio to 0.50 wt%. The physical properties are improved by the coexistence of the superconductor Y123 and nanosized Ni-Zn ferrites in nanocomposite material.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Electronic and Vibrational Properties of LiBO{sub 2} Crystals

On the basis of the density functional theory using the CRYSTAL code, electronic and vibrational properties of lithium metaborate in the monoclinic and tetragonal phases are studied. The band spectra, elastic moduli, long-wave vibrational frequencies at the point Г, dynamic charges, and acoustic velocities are calculated for both phases. The influence of structural features and short-range order in trigonal BO{sub 3}- and tetragonal BO{sub 4}- groups on the significant difference in physical properties in the low-temperature and high-temperature phases of LiBO{sub 2} crystal is established.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Intramolecular Halogen Atom Coordinated H Transfer via Ion-Neutral Complex in the Gas Phase Dissociation of Protonated Dichlorvos Derivatives

Intramolecular halogen atom coordinated H transfer reaction in the gas phase dissociation of protonated dichlorvos derivatives has been explored by electrospray ionization tandem mass spectrometry. Upon collisional activation, protonated dichlorvos underwent dissociation reaction via cleavage of the P–O bond to give reactive ion-neutral complex (INC) intermediate, [dimethoxylphosphinoylium + dichloroacetaldehyde]. Besides direct dissociation of the complex, intramolecular chlorine atom coordinated H transfer reaction within the complex takes place, leading to the formation of protonated dimethyl chlorophosphate. To investigate the fragmentation mechanism, deuterium-labeled experiments and several other halogen-substituted (Br and F) analogs of dichlorvos were prepared and evaluated, which display a similar intramolecular halogen transfer. Density functional theory (DFT)-based calculations were performed and the computational results also support the mechanism. .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Self-consistent field theory simulations of polymers on arbitrary domains

We introduce a framework for simulating the mesoscale self-assembly of block copolymers in arbitrary confined geometries subject to Neumann boundary conditions. We employ a hybrid finite difference/volume approach to discretize the mean-field equations on an irregular domain represented implicitly by a level-set function. The numerical treatment of the Neumann boundary conditions is sharp, i.e. it avoids an artificial smearing in the irregular domain boundary. This strategy enables the study of self-assembly in confined domains and enables the computation of physically meaningful quantities at the domain interface. In addition, we employ adaptive grids encoded with Quad-/Oc-trees in parallel to automatically refine the grid where the statistical fields vary rapidly as well as at the boundary of the confined domain. This approach results in a significant reduction in the number of degrees of freedom and makes the simulations in arbitrary domains using effective boundary conditions computationally efficient in terms of both speed and memory requirement. Finally, in the case of regular periodic domains, where pseudo-spectral approaches are superior to finite differences in terms of CPU time and accuracy, we use the adaptive strategy to store chain propagators, reducing the memory footprint without loss of accuracy in computed physical observables.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study of Mg{sub x}Cd{sub 1−x}O applying density functional theory: Stability, structural phase transition and electronic properties

Stability of B1 and B2 phases of Mg{sub x}Cd{sub 1−x}O is studied by calculating the formation energy within the framework of density functional theory applying the crystalline-orbital program package. Structural and electronic properties of the two polymorphs are reported for x=0.25, 0.50 and 0.75. The equilibrium lattice constants and bulk moduli are computed. Enthalpy calculations show pressure induced B1→B2 phase transitions at 92 GPa, 138 GPa and 212 GPa, respectively, for Mg{sub 0.25}Cd{sub 0.75}O, Mg{sub 0.50}Cd{sub 0.50}O and Mg{sub 0.75}Cd{sub 0.25}O compositions. Formation energy of ternary oxides in the B1 phase is negative with respect to mixing of B2-MgO with B1-CdO. Mixing B1-MgO with B2-CdO also leads to negative formation energy in Cd rich B1 phase ternary oxides (0≤x≤0.5). Band structure calculations predict direct band gaps in the B1 phase and indirect band gaps in the B2 phase ternary oxides. Mulliken population analysis is performed for the two polymorphs to study the charge transfer. - Graphical abstract: Diagram reveals trends in formation energy while mixing B2-MgO with B1-CdO to form B1-Mg{sub x}Cd{sub 1−x}O. Formation energies obtained from mixing isostructural and nonisostructural components are also shown. Display Omitted - Highlights: • Lattice constants and bulk moduli are computed for Mg{sub 0.25}Cd{sub 0.75}O, Mg{sub 0.50}Cd{sub 0.50}O and Mg{sub 0.75}Cd{sub 0.25}O compositions. • Enthalpy calculations signify pressure induced B1→B2 phase transitions at 92 GPa, 138 GPa and 212 GPa, respectively, in Mg{sub 0.25}Cd{sub 0.75}O, Mg{sub 0.50}Cd{sub 0.50}O and Mg{sub 0.75}Cd{sub 0.25}O. • Band structure calculations predict direct band gaps in the B1 phase ternary oxides. • In the B2 phase ternary oxides band structure calculations show valence band maximum along the Γ–X direction and the conduction band minimum at the Γ point of symmetry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic structure and electron-phonon coupling in TiH$_2$

Calculations using first principles methods and strong coupling theory are carried out to understand the electronic structure and superconductivity in cubic and tetragonal TiH$_2$. A large electronic density of states at the Fermi level in the cubic phase arises from Ti-$t_{2g}$ states and leads to a structural instability against tetragonal distortion at low temperatures. However, constraining the in-plane lattice constants diminishes the energy gain associated with the tetragonal distortion, allowing the cubic phase to be stable at low temperatures. Furthermore, calculated phonon dispersions show decoupled acoustic and optic modes arising from Ti and H vibrations, respectively and frequencies of optic modes to be rather high. The cubic phase has a large electron-phonon coupling parameter $\lambda$ and critical temperature of several K. Contribution of the hydrogen sublattice to $\lambda$ is found to be small in this material, which we understand from strong coupling theory to be due to the small H-$s$ DOS at the Fermi level and high energy of hydrogen modes at the tetrahedral sites.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A density functional theory and time-dependent density functional theory investigation on the anchor comparison of triarylamine-based dyes

To understand the effects of the anchor part in organic dyes on the energy conversion efficiency of dye-sensitized solar cells (DSCs), two different anchor groups used in metal-free triphenylamine (TPA)-based organic dyes for DSCs have been theoretically compared. Density functional theory (DFT) and time-dependent DFT (TDDFT) study of geometry properties, excitations, and electronic structures of triarylamine-based dyes (TC1 and TPAR1) before and after binding to titanium has been performed under the level of TD-PBE1PBE/6-311G(d,p)//B3LYP/6-311G(d,p). The result shows that cyanoacrylic acid anchor favors better photoelectrochemical properties of DSCs than that of rhodanine-3-acetic acid anchor via providing more shift of TiO{sub 2} conduction band toward the vacuum energy levels (larger open circuit potentials) and more favorable conjugation with titanium. This study is expected to shed light on the design of metal-free organic dyes for DSCs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multiscale modeling of the influence of Fe content in a Al-Si-Cu alloy on the size distribution of intermetallic phases and micropores

A multiscale model was developed to simulate the formation of Fe-rich intermetallics and pores in quaternary Al-Si-Cu-Fe alloys. At the microscale, the multicomponent diffusion equations were solved for multiphase (liquid-solid-gas) materials via a finite difference framework to predict microstructure formation. A fast and robust decentered plate algorithm was developed to simulate the strong anisotropy of the solid/liquid interfacial energy for the Fe-rich intermetallic phase. The growth of porosity was controlled by local pressure drop due to solidification and interactions with surrounding solid phases, in addition to hydrogen diffusion. The microscale model was implemented as a subroutine in a commercial finite element package, producing a coupled multiscale model. This allows the influence of varying casting conditions on the Fe-rich intermetallics, the pores, and their interactions to be predicted. Synchrotron x-ray tomography experiments were performed to validate the model by comparing the three-dimensional morphology and size distribution of Fe-rich intermetallics as a function of Fe content. Large platelike Fe-rich {beta} intermetallics were successfully simulated by the multiscale model and their influence on pore size distribution in shape castings was predicted as a function of casting conditions.

36 MATERIALS SCIENCE↗

Finite element model-simulation-based characterization of a magnetostrictive gyrosensor

This paper analyzes a prototype microgyrosensor that employs the magnetostrictive alloy Galfenol for transduction of Coriolis-induced forces into an electrical output for quantifying a given angular velocity. The magnetic induction distribution in the Galfenol sensor patch depends on its bending shape and magnetoelastic properties and is investigated using a finite element model. Fluctuations in magnetic induction caused by a sinusoidal rotation of the sensor produce an amplitude modulated voltage in a surrounding coil which is simulated and measured.

36 MATERIALS SCIENCE↗

Study of anticlastic deformation in a silicon crystal for channeling experiments

Anticlastic deformation (AD) is an established mechanical property of isotropic solid bodies, which has been recently used to steer particle beams through channeling in Si crystals. An analysis of AD in an anisotropic material, such as Si, has been worked out with particular emphasis to the cases used in channeling experiments. Both a theoretical model and finite element simulations were developed and compared to experimental data achieved by optical profilometry on bent Si crystals. A quantifier of the extent of AD, namely the ratio between primary and secondary curvature radii, has been found to be orientation dependent and determined analytically. The realistic case of crystal bending by a mechanical holder has been studied for applications. We addressed the case of the holder with a crystal at the energy currently under operation in the CERN super proton synchrotron and its possible extension to higher energy cases such as for the large hadron collider. Anisotropy-driven torsion of the crystal was investigated, determining a limitation to the portion of the crystal suitable for channeling. The geometry of the jaws clamping the crystal was considered too.

36 MATERIALS SCIENCE↗

Insertion of an organic interlayer for hole current enhancement in inverted organic light emitting devices

We report the enhancement of hole current density in the hole transport part of an inverted top-emission organic light emitted diode by applying an organic insertion layer of 1,4,5,8,9,11-hexaazatriphenylene-hexacarbonitrile (HAT-CN). Poor hole transporting performance of Al/4,4{sup '}-bis(N-phenyl-1-naphthylamino)biphenyl (NPB)/indium tin oxide is greatly improved by the HAT-CN insertion between Al and NPB layer. The highest occupied molecular orbital level onset of the NPB bends toward Fermi level at the HAT-CN/NPB interface. This extra charge generation layer made of pure organic molecules substantially enhances hole injection from Al anode as revealed by the results of ultraviolet photoelectron spectroscopy and J-V measurement data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modeling Of Microstructure Evolution Of BCC Metals Subjected To Severe Plastic Deformation

Prediction of microstructure evolution and properties of ultrafine-grained materials is one of the most significant, current problems in materials science. Several advanced methods of analysis can be applied for this issue: vertex models, phase field models, Monte Carlo Potts, finite element method (FEM) discrete element method (DEM) and finally cellular automata (CA). The main asset of the CA is ability for a close correlation of the microstructure with the mechanical properties in micro- and meso-scale simulation. Joining CA with the DEM undoubtedly improves accuracy of modeling of coupled phenomena during the innovative forming processes in both micro- and macro-scale. Deformation in micro-scale shows anisotropy, which connected with that the polycrystalline material contains grains with different crystallographic orientation, and grain deformation is depended from configuration of directions of main stresses and axis of grain. Then, CA and DEM must be joint solutions of crystal plasticity theory. In the present model, deformation in macro-scale is transferred to meso-sale, where a block contains several, score or hundreds grains, and then is applied in micro-scale to each grain. Creation of low-angle boundaries and their development into high-angle boundaries are simulated by the cellular automata on the base of calculations using finite element method and crystal plasticity theory. The idea proposed in this study and particular solutions are discussed for the case of ultrafine-grained low-carbon steel.

36 MATERIALS SCIENCE↗

Scaling behavior of quantum nanosystems: Emergence of quasi-particles, collective modes, and mixed exchange symmetry states

Examples of quantum nanosystems are graphene nanoribbons, molecular wires, and superconducting nanoparticles. The objective of the multiscale theory presented here is to provide a new perspective on the coupling of processes across scales in space and time underlying the dynamics of these systems. The long range objective for this multiscale approach is to serve as an efficient computational algorithm. Long space-time dynamics is derived using a perturbation expansion in the ratio {epsilon} of the nearest-neighbor distance to a nanometer-scale characteristic length and a theorem on the equivalence of long time-averages and expectation values. This dynamics is shown to satisfy a coarse-grained wave equation (CGWE) which takes a Schroedinger-like form with modified masses and interactions. The scaling of space and time is determined by the orders of magnitude of various contributions to the N-body potential. If the spatial scale of the coarse-graining is too large, the CGWE would imply an unbounded growth of gradients; if it is too short, the system's size would display uncontrolled growth inappropriate for the bound states of interest, i.e., collective motion or migration within a stable nanoassembly. The balance of these two extremes removes arbitrariness in the choice of the scaling of space-time. Since the long-scale dynamics of each Fermion involves its interaction with many others, we hypothesize that the solutions of the CGWE have mean-field character to good approximation, i.e., can be factorized into single-particle functions. This leads to a coarse-grained mean-field approximation that is distinct in character from traditional Hartree-Fock theory. A variational principle is used to derive equations for the single-particle functions. This theme is developed and used to derive an equation for low-lying disturbances from the ground state corresponding to long wavelength density disturbances or long-scale migration. An algorithm for the efficient simulation of quantum nanosystems is suggested.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗