Search NASA⌕ Search

SEARCH · Search NASA

Results for “Microstructural properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

High-throughput simulations for insight into grain boundary structure-property relationships and other complex microstructural phenomena

High-throughput simulations can be a powerful tool in the discovery of new materials and behaviors. As part of a special issue on Rising Stars in Computational Materials Science, this paper uses the work of the author to show how high-throughput simulations have had an impact in grain boundary structure-property relationships and other complex microstructural phenomena. The work demonstrates how new tools designed to analyze large datasets produced by high-throughput simulations are enabling comprehensive grain boundary structure-property relationships to be obtained. High-throughput simulations are also used to demonstrate the impact descriptive and inferential statistics has had in extracting key aspects of deformation in metallic glasses. Finally, several different examples are used to show a balanced approach between simulations designed to survey and simulations designed for detailed analysis. Together, the two approaches provide a comprehensive picture of the variety of behaviors that exist, while ensuring that the physics underlying the behaviors are thoroughly understood.

36 MATERIALS SCIENCE↗

Correlation between structural and mechanical properties of RF magnetron sputter deposited hydroxyapatite coating

Highlights: • Microstructure and mechanical properties of textured hydroxyapatite (HA) coatings were evaluated. • TEM results revealed two types of coating microstructure corresponding to the film texture. • Elastic performance of the coating was determined by the texture of the HA coating. • HA coating with (300) texture showed larger elastic recovery. - Abstract: In the present study hydroxyapatite (HA) thin films with a,b-plain and c-plain preferential orientation were prepared by means of RF-magnetron sputtering with water vapor addition into a working gas atmosphere to investigate the influence of microstructural features on mechanical performance of the coating at nanoscale. The mechanical properties of the HA coatings textured along a,b- and c-axes by nanoindentation conclusively highlight that elastic modulus, H/E ratio, H{sup 3}/E{sup 2} parameter and percent of elastic recovery are determined by preferential orientation of the film. Nanoindentation reveals that the HA films exhibiting (300) texture possess commensurate nanohardness and lower elastic modulus compared to (002) oriented films, indicating that the former films possess higher resistance to cracking. The (002) and (300) textured coatings exhibited a nanohardness of 4.7 ± 2.0 GPa and 4.4 ± 2.2 GPa, respectively. The elastic modulus of the HA film with (300) and (002) preferential orientation was 75 ± 40 GPa and 103 ± 40 GPa, respectively. The HA coating with (300) texture showed a higher percentage of elastic recovery of 92% within unloading than that of the (002) textured film (69%).

36 MATERIALS SCIENCE↗

Peculiar Features of Thermal Aging and Degradation of Rapidly Quenched Stainless Steels under High-Temperature Exposures

This article presents the results of comparative studies of mechanical properties and microstructure of nuclear fuel tubes and semifinished stainless steel items fabricated by consolidation of rapidly quenched powders and by conventional technology after high-temperature exposures at 600 and 700°C. Tensile tests of nuclear fuel tube ring specimens of stainless austenitic steel of grade AISI 316 and ferritic–martensitic steel are performed at room temperature. The microstructure and distribution of carbon and boron are analyzed by metallography and autoradiography in nuclear fuel tubes and semifinished items. Rapidly quenched powders of the considered steels are obtained by the plasma rotating electrode process. Positive influence of consolidation of rapidly quenched powders on mechanical properties after high-temperature aging is confirmed. The correlation between homogeneous distribution of carbon and boron and mechanical properties of the considered steel is determined. The effects of thermal aging and degradation of the considered steels are determined at 600°C and 700°C, respectively.

36 MATERIALS SCIENCE↗

Structural and Magnetic Characteristics of Ferroxplana Co{sub 2}Y Nanoferrites Synthesized via Two Chemical Routes

Barium Y-type hexaferrite Ba{sub 2}Co{sub 2}Fe{sub 12}O{sub 22} nanopowders have been purposefully tailored using two different chemical wet methods, namely sol-gel auto-combustion (SGA) and co-precipitation (CP) routes. The impact of the pre-annealing and the annealing temperature of the formed precursors synthesized using two strategies on the structural, microstructure, and magnetic properties was investigated using x-ray diffraction (XRD), scanning electron microscopic (SEM), Fourier transform infrared spectroscopy (FT-IR), and vibrating sample magnetometer (VSM). For instance, well-defined Ba{sub 2}Co{sub 2}Fe{sub 12}O{sub 22} hexagonal plate-like particles was observed using SGA and CP routes for the precursors pre-annealed at 600 {sup ∘}C for 4 h and then annealed at low temperature 1000 {sup ∘}C for 2 h. The magnetic properties measured at room temperature evinced that hexaferrite Co{sub 2}Y particles have ferromagnetic characteristics. Good magnetic properties involving saturation magnetization (M{sub s}) of 23.64 and 24.37 emu/g and the coercivity (H{sub c}) of 417.76 and 280.92 Oe were accomplished for the samples pre-annealed at 600 {sup ∘}C for 4 h and then annealed at 1000 {sup ∘}C for 2 h for SGA and CP methods, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Additive Manufacturing of Metallic Materials: A Review

In this review article, the latest developments of the four most common additive manufacturing methods for metallic materials are reviewed, including powder bed fusion, direct energy deposition, binder jetting, and sheet lamination. In addition to the process principles, the microstructures and mechanical properties of AM-fabricated parts are comprehensively compared and evaluated. Finally, several future research directions are suggested.

36 MATERIALS SCIENCE↗

Predictive design of novel nickel-based superalloys beyond Haynes 282

Nickel-based superalloys are in great demand for harsh-service conditions involving high temperatures and oxidative environments. Haynes 282 stands out due to its excellent high-temperature properties and easy fabricability. However, the upper operation temperature of Haynes 282 is limited due to its relatively low liquidus temperature. Equipped with high-fidelity density-functional theory calculations and high-throughput experimentation methodology, we explored new compositional spaces that exhibit higher liquidus temperature and higher strength. While maintaining the manufacturability, the newly designed alloy shows improved strength and ductility at room temperature and better oxidation resistance up to 800°C. Here, the new compositions showcase a minor change in the refractory and metalloid content can significantly impact the mechanical and oxidation performance of superalloys.

36 MATERIALS SCIENCE↗

Evolution of the role of molybdenum in duplex stainless steels during thermal aging: From enhancing spinodal decomposition to forming heterogeneous precipitates

Thermal aging of ferrite in duplex stainless steels leads to a complex microstructural evolution that can give way to large deleterious changes in mechanical properties. The microstructural evolution mechanisms that happen concurrently are strongly linked to minor changes in composition. By characterizing duplex stainless steels with various compositions over a range of aging conditions, it was revealed that adding a modest amount of Mo to cast austenitic stainless steel (such as changing from grade CF3 to grade CF3M) not only increases the kinetics of spinodal decomposition and Ni-Si-Mn-rich G-phase precipitation, but it also forms a separate Mo-rich phase. At shorter equivalent aging times, Mo segregates from Fe and towards Cr accelerating spinodal decomposition. At longer aging times, Mo enriches in the Ni-Si-Mn clusters before phase separating into an adjoined Mo-rich cluster. We found that these phase changes and precipitation events result in a rather steep drop in fracture and impact toughness. These results will inform the design of similar alloys for use at high temperatures.

36 MATERIALS SCIENCE↗

Effect of cooling rate and Mg addition on the structural evaluation of rapidly solidified Al-20wt%Cu-12wt%Fe alloy

The present work examines the effect of Mg contents and cooling rate on the morphology and mechanical properties of Al{sub 20}Cu{sub 12}Fe quasicrystalline alloy. The microstructure of the alloys was analyzed by scanning electron microscopy and the phase composition was identified by X-ray diffractometry. The melting characteristics were studied by differential thermal analysis under an Ar atmosphere. The mechanical features of the melt-spun and conventionally solidified alloys were tested by tensile-strength test and Vickers micro-hardness test. It was found that the final microstructure of the Al{sub 20}Cu{sub 12}Fe samples mainly depends on the cooling rate and Mg contents, which suggests that different cooling rates and Mg contents produce different microstructures and properties. The average grain sizes of the melt spun samples were about 100–300 nm at 35 m/s. The nanosize, dispersed, different shaped quasicrystal particles possessed a remarkable effect to the mechanical characteristics of the rapidly solidified ribbons. The microhardness values of the melt spun samples were approximately 18% higher than those of the conventionally counterparts. - Highlights: •Quasicrystal-creating materials have high potential for applications. •Different shaped nanosize quasicrystal particles were observed. •The addition of Mg has an important impact on the mechanical properties. •H{sub V} values of the MS0, MS3 and MS5 samples at 35 m/s were 8.56, 8.66 and 8.80 GPa. •The volume fraction of IQC increases with increasing cooling rates.

36 MATERIALS SCIENCE↗

Ferromagnetism in ZrFe12-xAlx and HfFe12-xAlx (x = 6.0, 6,.5, 7.0)

Results of crystal structure, microstructure, and magnetic properties studies of arcmelted and annealed ZrFe{sub 6}Al{sub 6}, ZrFe{sub 5.5}Al{sub 6.5}, ZrFe{sub 5}Al{sub 7}, HfFe{sub 6}Al{sub 6}, HfFe{sub 5.5}Al{sub 6.5}, and HfFe{sub 5}Al{sub 7} are reported. These compounds adopt the ThMn12 structure-type (space group 139, I4/mmm), like their more common rare-earth analogues. Analysis of powder x-ray diffraction data show that the 8f site is occupied by Fe, the 8i site by Al, and the 8j site by a mixture of Fe and Al. All of the compounds undergo a ferromagnetic transition at temperatures ranging from 170 to 270 K. Three effects on the magnetic properties are noted as the Fe content is increased: decrease in the Curie temperature, decrease in the magnetic moment per Fe at high fields, and the development of non-monotonic temperature dependence of the low-field magnetization below the Curie temperature. First principles calculations indicate a ferromagnetic ground state, but find antiferromagnetic interactions among Fe moments on 8j sites which is likely important in understanding the observed behavior.

36 MATERIALS SCIENCE↗

Non-contact direct measurement of the magnetocaloric effect in thin samples

An experimental setup, based on a non-contact temperature sensor, is proposed to directly measure the magnetocaloric effect of samples few micrometers thick. The measurement of the adiabatic temperature change of foils and ribbons is fundamental to design innovative devices based on magnetocaloric thin materials or micro-structuring bulk samples. The reliability of the proposed setup is demonstrated by comparing the measurements performed on a bulk gadolinium sample with the results obtained by an experimental setup based on a Cernox bare chip thermoresistance and by in-field differential scanning calorimetry. We show that this technique can measure the adiabatic temperature variation on gadolinium sheets as thin as 27 μm. Heat transfer simulations are added to describe the capability of the presented technique.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Giant strain with low cycling degradation in Ta-doped [Bi{sub 1/2}(Na{sub 0.8}K{sub 0.2}){sub 1/2}]TiO{sub 3} lead-free ceramics

Non-textured polycrystalline [Bi{sub 1/2}(Na{sub 0.8}K{sub 0.2}){sub 1/2}](Ti{sub 1−x}Ta{sub x})O{sub 3} ceramics are fabricated and their microstructures and electrical properties are characterized. Transmission electron microscopy reveals the coexistence of the rhombohedral R3c and tetragonal P4bm phases in the form of nanometer-sized domains in [Bi{sub 1/2}(Na{sub 0.8}K{sub 0.2}){sub 1/2}]TiO{sub 3} with low Ta concentration. When the composition is x = 0.015, the electrostrain is found to be highly asymmetric under bipolar fields of ±50 kV/cm. A very large value of 0.62% is observed in this ceramic, corresponding to a large-signal piezoelectric coefficient d{sub 33}* of 1240 pm/V (1120 pm/V under unipolar loading). These values are greater than most previously reported lead-free polycrystalline ceramics and can even be compared with some lead-free piezoelectric single crystals. Additionally, this ceramic displays low cycling degradation; its electrostrain remains above 0.55% even after undergoing 10 000 cycles of ±50 kV/cm bipolar fields at 2 Hz. Therefore, Ta-doped [Bi{sub 1/2}(Na{sub 0.8}K{sub 0.2}){sub 1/2}]TiO{sub 3} ceramics show great potential for large displacement devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

EVOLUTION OF SIZE DISTRIBUTION OF ICY GRAINS BY SUBLIMATION AND CONDENSATION

In the outer part of a protoplanetary disk, dust grains consist of silicate core covered by an ice mantle. A temporal heating event in the disk results in sublimation of the ice mantle. After the end of the heating event, as the temperature decreases, H{sub 2}O molecules recondense on the surface of the dust grain. Ultimately, the dust grain is covered by an ice mantle. Because the equilibrium vapor pressure on the grain surface decreases with the grain size, a large grain grows faster than a small grain. As a result, the size of an icy dust grain changes as a result of the heating event. The change in size also affects the mechanical properties of the dust aggregates formed by the icy grains. In this paper, we investigated the evolution of the size distribution of icy dust grains during sublimation and condensation. We found that the size evolution of icy grains can be divided into two stages. In the first stage, the icy grains grow through condensation of H{sub 2}O molecules. In the second stage, the size of grains changes further as H{sub 2}O molecules are transferred between icy grains while the surrounding gas condenses. The size distribution of the icy dust grains becomes bimodal, with a small number of relatively large grains and many small grains without an icy mantle. Possible effects of the size change on the evolution of icy dust aggregates are discussed.

36 MATERIALS SCIENCE↗

Sintered-reaction Bonded Silicon Nitride Densified by a Gas Pressure Sintering Process Effects of Rare Earth Oxide Sintering Additives

Reaction-bonded silicon nitrides containing rare-earth oxide sintering additives were densified by gas pressure sintering. The sintering behavior, microstructure and mechanical properties of the resultant specimens were analyzed. For that purpose, Lu2O3-SiO2 (US), La2O3-MgO (AM) and Y2O3-Al2O3 (YA) additive systems were selected. Among the tested compositions, densification of silicon nitride occurred at the lowest temperature when using the La2O3-MgO system. Since the Lu2O3-SiO2 system has the highest melting temperature, full densification could not be achieved after sintering at 1950oC. However, the system had a reasonably high bending strength of 527 MPa at 1200oC in air and a high fracture toughness of 9.2 MPa m1/2. The Y2O3-Al2O3 system had the highest room temperature bending strength of 1.2 GPa

36 MATERIALS SCIENCE↗

Modeling of Heat and Mass Transfer in Fusion Welding

In fusion welding, parts are joined together by melting and subsequent solidification. Although this principle is simple, complex transport phenomena take place during fusion welding, and they determine the final weld quality and performance. The heat and mass transfer in the weld pool directly affect the size and shape of the pool, the solidification microstructure, the formation of weld defects such as porosity and humping, and the temperature distribution in the fusion zone and heat-affected zone (HAZ). Furthermore, the temperature evolution affects the kinetics and extent of various solid-state phase transformations, which in turn determine the final weld microstructure and mechanical properties. The formation of residual stresses and distortion originates from the thermal expansion and contraction during welding heating and cooling, respectively.

36 MATERIALS SCIENCE↗

Modeling of Failure Modes Induced by Plastic Strain Localization in Dual Phase Steels

Microstructure level inhomogeneity between the harder martensite phase and the softer ferrite phase renders the dual phase (DP) steels more complicated failure mechanisms and associated failure modes compared to the conventionally used low alloy homogenous steels. This paper examines the failure mode DP780 steel and DP 980 steel under different loading conditions using finite element analyses on the microstructure levels. Micro-mechanics analyses based on the actual microstructures of DP steel are performed. The two-dimensional microstructure of DP steel was recorded by scanning electron microscopy (SEM). Mechanical properties of the ferrite and martensite phases exhibit the dependency of the different chemistry and thermal mechanical processes. The plastic work hardening properties of the ferrite phase was determined by the synchrotron-based high-energy X-ray diffraction technique. The work hardening properties of the martensite phase were calibrated and determined based on the uniaxial tensile test results. Under different loading conditions, different failure modes are predicted in the form of plastic strain localization. The local failure mode was closely related to the stress state in the material. Under plane stress condition with free lateral boundary, one dominant shear band develops and leads to final failure of the material. However, if the lateral boundary was strictly constrained, splitting failure perpendicular to the loading direction is predicted. On the other hand, under plane strain loading condition, commonly observed necking phenomenon is predicted which leads to the final failure of the material. Numerical predictions were well validated by the experimental.

36 MATERIALS SCIENCE↗

A first-principles study of cementite (Fe{sub 3}C) and its alloyed counterparts: Elastic constants, elastic anisotropies, and isotropic elastic moduli

A comprehensive computational study of elastic properties of cementite (Fe{sub 3}C) and its alloyed counterparts (M{sub 3}C (M = Al, Co, Cr, Cu, Fe, Hf, Mn, Mo, Nb, Ni, Si, Ta, Ti, V, W, Zr, Cr{sub 2}FeC and CrFe{sub 2}C) having the crystal structure of Fe{sub 3}C is carried out employing electronic density-functional theory (DFT), all-electron PAW pseudopotentials and the generalized gradient approximation for the exchange-correlation energy (GGA). Specifically, as a part of our systematic study of cohesive properties of solids and in the spirit of materials genome, following properties are calculated: (i) single-crystal elastic constants, C{sub ij}, of above M{sub 3}Cs; (ii) anisotropies of bulk, Young’s and shear moduli, and Poisson’s ratio based on calculated C{sub ij}s, demonstrating their extreme anisotropies; (iii) isotropic (polycrystalline) elastic moduli (bulk, shear, Young’s moduli and Poisson’s ratio) of M{sub 3}Cs by homogenization of calculated C{sub ij}s; and (iv) acoustic Debye temperature, θ{sub D}, of M{sub 3}Cs based on calculated C{sub ij}s. We provide a critical appraisal of available data of polycrystalline elastic properties of alloyed cementite. Calculated single crystal properties may be incorporated in anisotropic constitutive models to develop and test microstructure-processing-property-performance links in multi-phase materials where cementite is a constituent phase.

36 MATERIALS SCIENCE↗

Analysis on the Fracture of Al-Cu Dissimilar Materials Friction Stir Welding Lap Joint

Friction stir welding (FWS) is regarded as a more plausible alternative to other welding methods for Al-Cu dissimilar joining. However, the structure of an FSW joint is different from others. In this study, lap joints of 6061 aluminum alloy and commercially pure copper were produced by FSW, and the effects of rotation rate on macromorphology, microstructure and mechanical properties were investigated. In addition, a fracture J integral model was used to analyze the effect of microstructure on the mechanical properties. The results revealed that the macrodefect-free joints were obtained at a feed rate of 150 mm/min and 1100 rpm and that the failure load of the joint reached as high as 4.57 kN and only reached 2.91 kN for the 900 rpm, where tunnel defects were identified. Particle-rich zones composed of Cu particles dispersed in an Al matrix, and “Flow tracks” were observed by the EDS. The J integral results showed that the microdefects on the advancing side cause serious stress concentration compared with the microdefects located on the Al-Cu interface, resulting in the fracture of the joints.

36 MATERIALS SCIENCE↗

Relating microstructure, temperature, and chemistry to explosive ignition and shock sensitivity

An analysis is put forth that relates explosive properties including microstructure, temperature, and chemistry to explosive ignition and sensitivity. Unlike approaches that focus only on elucidating mesoscopic mechanisms important to ignition, the present analysis seeks a methodology directly applicable to continuum explosive burn models. Because the Scaled Uniform Reactive Front (SURF) burn model has a microstructural basis, it is chosen as the starting point of the present analysis. To build upon the SURF framework, a literal translation is performed of the high-level conceptual notions for which SURF is based, to concrete ignition–combustion parameters, a statistical description of the microstructure, and other thermo-chemical data acquired by non-shock experiments. The analysis requires a void volume fraction distribution acquired from ultra-small angle neutron scattering (USANS). The shock response of PBX 9502 is used to illustrate the theory. While the analysis requires calibration to a shock experiment (the pop plot, for example), the results are a self-consistent set of realistic physical quantities that contribute to the shock initiation process including, initial temperature, chemical kinetics, a statistical description of the microstructure, and the hot spot size, spacing, and temperature. The utility of having a mesoscale based theory is that once the critical hot spot temperature, as a function of shock pressure, is known for a given explosive and initial porosity distribution, the entire set of meso- and macro-scale results, including the pop plot can be calculated for any other porosity. Thus, one can understand changes in sensitivity at different densities (void size distributions), relying only on the assumption that the hot spot temperature curve would not differ significantly if the morphology of the hots spots were similar. Another important utility of the present analysis is to address the question of the role of initial temperature on the observed shock sensitivity of PBX 9502 and other explosives.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗