Search NASA⌕ Search

SEARCH · Search NASA

Results for “Net Zero”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

DWPF SIMULANT CPC STUDIES FOR SB7B

Lab-scale DWPF simulations of Sludge Batch 7b (SB7b) processing were performed. Testing was performed at the Savannah River National Laboratory - Aiken County Technology Laboratory (SRNL-ACTL). The primary goal of the simulations was to define a likely operating window for acid stoichiometry for the DWPF Sludge Receipt and Adjustment Tank (SRAT). In addition, the testing established conditions for the SRNL Shielded Cells qualification simulation of SB7b-Tank 40 blend, supported validation of the current glass redox model, and validated the coupled process flowsheet at the nominal acid stoichiometry. An acid window of 105-140% by the Koopman minimum acid (KMA) equation (107-142% DWPF Hsu equation) worked for the sludge-only flowsheet. Nitrite was present in the SRAT product for the 105% KMA run at 366 mg/kg, while SME cycle hydrogen reached 94% of the DWPF Slurry Mix Evaporator (SME) cycle limit in the 140% KMA run. The window was determined for sludge with added caustic (0.28M additional base, or roughly 12,000 gallons 50% NaOH to 820,000 gallons waste slurry). A suitable processing window appears to be 107-130% DWPF acid equation for sludge-only processing allowing some conservatism for the mapping of lab-scale simulant data to full-scale real waste processing including potentially non-conservative noble metal and mercury concentrations. This window should be usable with or without the addition of up to 7,000 gallons of caustic to the batch. The window could potentially be wider if caustic is not added to SB7b. It is recommended that DWPF begin processing SB7b at 115% stoichiometry using the current DWPF equation. The factor could be increased if necessary, but changes should be made with caution and in small increments. DWPF should not concentrate past 48 wt.% total solids in the SME cycle if moderate hydrogen generation is occurring simultaneously. The coupled flowsheet simulation made more hydrogen in the SRAT and SME cycles than the sludge-only run with the same acid stoichiometric factor. The slow acid addition in MCU seemed to alter the reactions that consumed the small excess acid present such that hydrogen generation was promoted relative to sludge-only processing. The coupled test reached higher wt.% total solids, and this likely contributed to the SME cycle hydrogen limit being exceeded at 110% KMA. It is clear from the trends in the SME processing GC data, however, that the frit slurry formic acid contributed to driving the hydrogen generation rate above the SME cycle limit. Hydrogen generation rates after the second frit addition generally exceeded those after the first frit addition. SRAT formate loss increased with increasing acid stoichiometry (15% to 35%). A substantial nitrate gain which was observed to have occurred after acid addition (and nitrite destruction) was reversed to a net nitrate loss in runs with higher acid stoichiometry (nitrate in SRAT product less than sum of sludge nitrate and added nitric acid). Increased ammonium ion formation was also indicated in the runs with nitrate loss. Oxalate loss on the order 20% was indicated in three of the four acid stoichiometry runs and in the coupled flowsheet run. The minimum acid stoichiometry run had no indicated loss. The losses were of the same order as the official analytical uncertainty of the oxalate concentration measurement, but were not randomly distributed about zero loss, so some actual loss was likely occurring. Based on the entire set of SB7b test data, it is recommended that DWPF avoid concentrating additional sludge solids in single SRAT batches to limit the concentrations of noble metals to SB7a processing levels (on a grams noble metal per SRAT batch basis). It is also recommended that DWPF drop the formic acid addition that accompanies the process frit 418 additions, since SME cycle data showed considerable catalytic activity for hydrogen generation from this additional acid (about 5% increase in stoichiometry occurred from the frit formic acid). Frit 418 also does not appear to need formic acid addition to prevent gel formation in the frit slurry. Simulant processing was successful using 100 ppm of 747 antifoam added prior to nitric acid instead of 200 ppm. This is a potential area for DWPF to cut antifoam usage in any future test program. An additional 100 ppm was added before formic acid addition. Foaming during formic acid addition was not observed. No build-up of oily or waxy material was observed in the off-gas equipment. Lab-scale mercury stripping behavior was similar to SB6 and SB7a. More mercury was unaccounted for as the acid stoichiometry increased.

08 HYDROGEN↗

Ti{sub 3}CrCu{sub 4}: A possible 2-D ferromagnetic spin fluctuating system

Ti{sub 3}CrCu{sub 4} is a new ternary compound which crystallizes in the tetragonal Ti{sub 3}Pd{sub 5} structure type. The Cr atoms form square nets in the a-b plane (a = 3.124 Å) which are separated by an unusually large distance c = 11.228 Å along the tetragonal axis, thus forming a -2-D Cr-sublattice. The paramagnetic susceptibility is characterized by a low effective moment, μ{sub eff} = 1.1 μ{sub B}, a low paramagnetic Curie temperature θ{sub P} (below 7 K) and a temperature independent χ{sub 0} = 6.7 x 10{sup −4} emu/mol. The magnetization at 1.8 K increases rapidly with field nearly saturating to 0.2 μ{sub B}/f.u. The zero field heat capacity C/T shows an upturn below 7 K (∼190 mJ/mol K{sup 2} at ∼0.1K) which is suppressed in applied magnetic fields and interpreted as suggesting the presence of spin fluctuations. The resistivity at low temperatures shows non-Fermi liquid behavior. Overall, the experimental data thus reveal an unusual magnetic state in Ti{sub 3}CrCu{sub 4}, which likely has its origin in the layered nature of the Cr sub-lattice and ferromagnetic spin fluctuations. Density functional theoretical calculations reveal a sharp Cr density of states peak just above the Fermi level, indicating the propensity of Ti{sub 3}CrCu{sub 4} to become magnetic.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Impact of Firebrick Resistance-Heated Energy Storage (FIRES) on Electricity Prices in a Nuclear Renewable Grid

Electricity markets are changing with the addition of wind and solar. Large-scale wind or solar will drive down the price of electricity at times of high wind or solar output to near zero. This revenue effect provides the economic limit for deployment of wind or solar but is also bad on the economics of base-load nuclear power plants. The historical proposed solution to revenue collapse has been electricity storage—from pumped hydro to batteries. However, such devices are expensive. The alternative is conversion of low-price electricity into high-temperature heat stored in very cheap firebrick. The energy is transferred from the electric sector to the industrial sector or (longer term) with an FHR with NACC into peak electricity. The net effect is to put a floor on the price of electricity equal to the price of natural gas or whatever fossil fuel is used by industry. That benefits solar, wind, base-load (LWR) nuclear, and the FHR with NACC. It also significantly reduces greenhouse gas emissions from the industrial and utility sectors with efficient use of all electricity generating sources.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Magnetic order and physical properties of the kagome metal UNb 6 ⁢Sn 6

The 𝑅⁢𝑀 6 ⁢𝑋 6 family of materials (𝑅 = rare-earth, 𝑀 = transition metal, 𝑋 = Ga, Si, Ge, Sn) produces an array of emergent phenomena, such as charge density waves, intrinsic Hall effects, and complex magnetic order, due to its kagome net of transition metal atoms, its local-moment magnetic anisotropies, and its extensive chemical tunability. Here, in this study, we report UNb 6⁢ Sn 6 , a new “166” material containing both an actinide and a 4⁢𝑑 transition metal, along with its nonmagnetic analog ThNb6⁢Sn6, to investigate the properties of a 5⁢𝑓−4⁢𝑑 electron 166 system. UNb 6 ⁢Sn 6 crystallizes in the hexagonal 𝑃⁢6/𝑚⁢𝑚⁢𝑚 space group with a small degree of disorder due to shifts in the size of the CoSn-like cages along the 𝑐 axis. Upon cooling at zero magnetic field, the material undergoes two magnetic phase transitions at 𝑇 2 = 46K and 𝑇 N = 43K. The low-temperature, zero-field phase is an antiferromagnet with ordered uranium moments and a k = (0,0,1/2) propagation vector determined by neutron diffraction. Remarkably, with a magnetic field applied along the 𝑐 axis, five additional magnetic transitions occur, evidenced by magnetization and resistivity data, before the moment saturates at 2.62 𝜇 B /U at 2 K and ≥ 13.6T. In two magnetic phase regions, the Hall resistivity of UNb 6⁢ Sn 6 significantly deviates from the magnetization, suggesting that the phases have a large Berry curvature or a change in the Fermi surface. The unknown magnetic ordering of the field-dependent phases of UNb 6⁢ Sn 6 demonstrates the complexity of the 5⁢𝑓−4⁢𝑑 166 system and encourages further study of its properties.

36 MATERIALS SCIENCE↗

Impact of Market Behavior, Fleet Composition, and Ancillary Services on Revenue Sufficiency

Revenue insufficiency, or the missing money problem, occurs when the revenues that generators earn from the market are not sufficient to cover both fixed and variable costs to remain in the market and/or justify investments in new capacity, which may be needed for reliability. The near-zero marginal cost of variable renewable generators further exacerbates these revenue challenges. Estimating the extent of the missing money problem in current electricity markets is an important, nontrivial task that requires representing both how the power system operates and how market participants behave. This paper explores the missing money problem using a production cost model that represented a simplified version of the Electric Reliability Council of Texas (ERCOT) energy-only market for the years 2012-2014. We evaluate how various market structures -- including market behavior, ancillary services, and changing fleet compositions -- affect net revenues in this ERCOT-like system. In most production cost modeling exercises, resources are assumed to offer their marginal capabilities at marginal costs. Although this assumption is reasonable for feasibility studies and long-term planning, it does not adequately consider the market behaviors that impact revenue sufficiency. In this work, we simulate a limited set of market participant strategic bidding behaviors by means of different sets of markups; these markups are applied to the true production costs of all gas generators, which are the most prominent generators in ERCOT. Results show that markups can help generators increase their net revenues overall, although net revenues may increase or decrease depending on the technology and the year under study. Results also confirm that conventional, variable-cost-based production cost simulations do not capture prices accurately, and this particular feature calls for proxies for strategic behaviors (e.g., markups) and more accurate representations of how electricity markets work. The analysis also shows that generators face revenue sufficiency challenges in this ERCOT-like energy-only market model; net revenues provided by the market in all base markup cases and sensitivity scenarios (except when a large fraction of the existing coal fleet is retired) are not sufficient to justify investments in new capacity for thermal and nuclear power units. Overall, the work described in this paper points to the need for improved behavioral models of electricity markets to more accurately study current and potential market design issues that could arise in systems with high penetrations of renewable generation.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Adhesive Wear of Rollers in Vacuum

This work was done to support NASA's James Webb Space Telescope that is equipped with a Near Infrared Camera and Spectrograph and Micro Shutter Assembly (MSA). A MSA mechanism's qualification test in cryogenic vacuum at 30deg K for 96K cycles resulted in roller wear and formation of some debris. Lab tests in vacuum were conducted at NASA Glenn Research Center (GRC) to understand the wear of Ti6Al4V mated with 440F steel rollers. Misalignment angle was found to have the most significant effect on debris formation. At misalignment angle of 1.4deg, significant amount of wear debris were formed within 50,000 cycles. Very few wear particles were found for a zero misalignment angle, and the total wear was small even after 367,000 cycles. The mode of wear in all the tests was attributed to adhesion, which was clearly evident from video records as well as the plate-like amalgamated debris material from both rollers. The adhesive wear rate was found to be approximately proportional to the misalignment angle. The wear is a two-way phenomenon, and the mixing of both roller materials in wear debris was confirmed by x-ray fluorescence (XRF) and EDX spectra. While there was a net loss of mass from the steel rollers, XRF and energy dispersive x-ray (EDX) spectra showed peaks of Ti on steel rollers, and peaks of Fe on Ti rollers. These results are useful for designers in terms of maintaining appropriate tolerances to avoid misalignment of rolling elements and the resulting severe wear

Shaeef, Iqbal↗

Effect of melting processes on the structure and precipitation of a heavy rainstorm in Beijing

Abstract Beijing and its surrounding areas experienced a torrential rainstorm from July 21 to 22, 2012. Previous studies have shown that melting was the main rainwater source in this process. In this paper, melting conversion processes were set to zero (NPMLT test) to analyze the effect of microphysical processes on the structure and precipitation of the convective system. The results showed that without the melting processes, the wind shear at the 700 hPa level decreased, and the wind field in Beijing and its surrounding areas changed. The cold front system moved faster, and the rainfall amount only reached the low rain level, much lower than that during the actual rainstorm. The hydrometeors sources had apparently changed. Though the latent heat release was large and little latent heat absorption occurred in the NPMLT test, the net latent heat did not affect the development of the convective system, and the precipitation was low. Therefore, microphysical processes greatly influence precipitation and convective system.

Guo, Chunwei↗

Catalytic Resonance Theory: Forecasting the Flow of Programmable Catalytic Loops

Chemical transformations on catalyst surfaces occur through series and parallel reaction pathways. These complex networks and their behavior can be most simply evaluated through a three-species surface reaction loop (A* to B* to C* to A*) that is internal to the overall chemical reaction. Application of an oscillating dynamic catalyst to this reactive loop has been shown to exhibit one of three types of behavior: (1) a positive net flux of molecules about the loop in the clockwise direction, (2) a negative net flux of molecules about the loop in the counterclockwise direction, or (3) negligible flux of molecules about the loop at the limit cycle of reaction. Three-species surface loops were simulated with microkinetic modeling to assess the reaction loop behavior resulting from a catalytic surface oscillating between two or more catalyst surface energy states. Selected input parameters for the simulations spanned an 11-dimensional parameter space using 127 688 different parameter combinations. Their converged limit cycle solutions were analyzed for their loop turnover frequencies, the majority of which were found to be approximately zero. Classification and regression machine learning models were trained to predict the sign and magnitude of the loop turnover frequency and successfully performed above accessible baselines. Notably, the classification models exhibited a baseline weighted F1 score of 0.49, whereas trained models achieved weighted F1 scores of 0.94 and 0.96 when trained on the parameters used to define the simulations and derived rate constants, respectively. The trained models successfully predicted catalytic loop behavior, and interpretation of these models revealed all input parameters to be important for the prediction and performance of each model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Effect of an Equatorial Continent on the Tropical Rain Belt. Part 1: Annual Mean Changes in the ITCZ

The TRACMIP (Tropical Rain Belts with an Annual Cycle and Continent Model Intercomparison Project) ensemble includes slab-ocean aquaplanet controls and experiments with a highly idealized tropical continent, characterized by modified aquaplanet grid cells with increased evaporative resistance, increased albedo, reduced heat capacity, and no ocean heat transport (zero Q-flux). In the annual mean, an equatorial cold tongue develops west of the continent and induces dry anomalies and a split in the oceanic intertropical convergence zone (ITCZ). Ocean cooling is initiated by advection of cold, dry air from the winter portion of the continent; warm, humid anomalies in the summer portion are restricted to the continent by anomalous surface convergence. The surface energy budget suggests that ocean cooling persists and intensifies because of a positive feedback between a colder surface, drier and colder air, reduced downwelling longwave (LW) flux, and enhanced net surface LW cooling (LW feedback). A feedback between wind, evaporation, and SST (so-called WES feedback) also contributes to the establishment and maintenance of the cold tongue. Simulations with a gray-radiation model and simulations that diverge from protocol (with negligible winter cooling) confirm the importance of moist-radiative feedbacks and of rectification effects on the seasonal cycle. This mechanism coupling the continental and oceanic climate might be relevant to the double ITCZ bias. The key role of the LW feedback suggests that the study of interactions between monsoons and oceanic ITCZs requires full-physics models and a hierarchy of land models that considers evaporative processes alongside heat capacity as a defining characteristic of land.

54 ENVIRONMENTAL SCIENCES↗

The problem of partial gravity on the Moon and Mars

Astronauts who spend many weeks or months in space in zero g suffer serious health problems including muscle atrophy, cardiovascular deconditioning, bone calcium loss, impaired vision, and immune system change. The debilitating effects of weightlessness were first demonstrated on the early Skylab, Salyut, and Mir missions, but it was too optimistically hoped that in-flight exercise and resistance training could prevent these problems. Similar problems are anticipated in the partial gravity of the Moon and Mars. Partial gravity exposure below 0.4 g seems too low to maintain musculoskeletal and cardiopulmonary conditioning in the long term. Some studies show a strong correlation between heart rate, oxygen consumption, net metabolic rate and simulated gravity from 0 to 1 g. Exposure to Moon and Mars gravities probably will cause less severe physiological deconditioning than experienced in 0 g, but the benefit of partial gravity seems likely to be roughly proportional to the 1/6 or 1/3 gravity experienced. As in 0 g, exercise countermeasures seem necessary but insufficient to preserve all physiological systems to a 1 g standard.

Harry W Jones↗

Effects of Rangeland Evapotranspiration on Groundwater Recharge, Discharge, and Flow at the Tuba City, Arizona, Disposal Site - 17159

The US Department of Energy Office of Legacy Management is modeling groundwater flow and contaminant transport at a former uranium mill site near Tuba City, Arizona. A goal is to project groundwater travel times and flow volumes between the former mill site and Moenkopi Wash, a down-gradient stream. Aquifer recharge and discharge are sensitive model parameters; however, assigning representative rates is inexact and involves approximations. We applied a remote sensing algorithm to determine spatially variable evapotranspiration (ET), precipitation recharge, and groundwater discharge rates for use in a large scale groundwater flow model for the site. ET is the combination of evaporation and plant transpiration from soil and groundwater. We estimated landscape-scale ET over a 13-year period (2000 to 2012) for distinct plant communities within a 3531-hectare groundwater model domain (GMD), and then evaluated effects of ET on groundwater recharge and discharge within the GMD. Our empirical algorithm was derived from ground ET measurements, multispectral satellite imagery, and temperature data. Groundwater recharge or discharge rates were calculated for each plant community (or ET Zone) as the difference between precipitation (PPT) and ET rates. Recharge occurred in plant communities where PPT exceeded ET; discharge occurred where ET exceeded PPT. Estimates of groundwater recharge rates for upland plant communities that survive on meteoric water ranged from 0 to 88 mm yr{sup -1}. Estimates of groundwater discharge for phreatophyte plant communities ranged from 23 mm yr{sup -1} to 150 mm yr{sup -1}. Phreatophytes are plants that survive by extracting groundwater. Zero recharge occurred in plant communities where ET rates equaled annual average precipitation. An increase in groundwater recharge (PPT > ET) was associated with past land disturbances and heavy livestock grazing in upland areas. Groundwater discharge (ET > PPT) was highest in riparian phreatophyte communities, but lower than optimal in upland phreatophyte communities impacted by heavy grazing. Protecting phreatophyte communities from grazing at Tuba City could potentially increase ET from 153 mm yr{sup -1} to at least 500 mm yr{sup -1}. The validity of using the ET algorithm to estimate recharge and discharge was evaluated by comparing the net volumetric outflow rate for the model domain with base flow measurements collected from Moenkopi Wash. Modeled outflow approximated measured flow gains in the Wash, increasing our confidence in the ET algorithm and in the model. Results suggest that rangeland management practices that reduce groundwater recharge rates and increase groundwater discharge rates should be evaluated as part of an overall groundwater remediation strategy. (authors)

54 ENVIRONMENTAL SCIENCES↗

Soil–plant–atmosphere conditions regulating convective cloud formation above southeastern US pine plantations

Abstract Loblolly pine trees ( Pinus taeda L.) occupy more than 20% of the forested area in the southern United States, represent more than 50% of the standing pine volume in this region, and remove from the atmosphere about 500 g C m per year through net ecosystem exchange. Hence, their significance as a major regional carbon sink can hardly be disputed. What is disputed is whether the proliferation of young plantations replacing old forest in the southern United States will alter key aspects of the hydrologic cycle, including convective rainfall, which is the focus of the present work. Ecosystem fluxes of sensible ( ) and latent heat (LE) and large‐scale, slowly evolving free atmospheric temperature and water vapor content are known to be first‐order controls on the formation of convective clouds in the atmospheric boundary layer. These controlling processes are here described by a zero‐order analytical model aimed at assessing how plantations of different ages may regulate the persistence and transition of the atmospheric system between cloudy and cloudless conditions. Using the analytical model together with field observations, the roles of ecosystem and LE on convective cloud formation are explored relative to the entrainment of heat and moisture from the free atmosphere. Our results demonstrate that cloudy–cloudless regimes at the land surface are regulated by a nonlinear relation between the Bowen ratio and root‐zone soil water content, suggesting that young/mature pines ecosystems have the ability to recirculate available water (through rainfall predisposition mechanisms). Such nonlinearity was not detected in a much older pine stand, suggesting a higher tolerance to drought but a limited control on boundary layer dynamics. These results enable the generation of hypotheses about the impacts on convective cloud formation driven by afforestation/deforestation and groundwater depletion projected to increase following increased human population in the southeastern United States.

Manoli, Gabriele↗

Weakening temperature control on the interannual variations of spring carbon uptake across northern lands

Ongoing spring warming allows the growing season to begin earlier, enhancing carbon uptake in northern ecosystems. We use 34 years of atmospheric CO 2 concentration measurements at Barrow, Alaska (BRW, 71° N) to show that the interannual relationship between spring temperature and carbon uptake has recently shifted. Here, we use two indicators: the spring zero-crossing date of atmospheric CO 2 (SZC) and the magnitude of CO 2 drawdown between May and June (SCC). The previously reported strong correlation between SZC, SCC and spring land temperature (ST) was found in the first 17 years of measurements, but disappeared in the last 17 years. As a result, the sensitivity of both SZC and SCC to warming decreased. Simulations with an atmospheric transport model coupled to a terrestrial ecosystem model suggest that the weakened interannual correlation of SZC and SCC with ST in the last 17 years is attributable to the declining temperature response of spring net primary productivity (NPP) rather than to changes in heterotrophic respiration or in atmospheric transport patterns. Reduced chilling during dormancy and emerging light limitation are possible mechanisms that may have contributed to the loss of NPP response to ST. These results thus challenge the ‘warmer spring–bigger sink’ mechanism.

54 ENVIRONMENTAL SCIENCES↗

Inertial Effects in Suspension Dynamics

The present work analyses the dynamics of a suspension of heavy particles in shear flow. The magnitude of the particle inertia is given by the Stokes number St = m(gamma/6(pi)a, which is the ratio of the viscous relaxation time of a particle tau(sub p) = m=6pi(eta)a to the flow time gamma(sup -1). Here, m is the mass of the particle, a is its size, eta is the viscosity of the suspending fluid and gamma is the shear rate. The ratio of the Stokes number to the Reynolds number, Re = (rho)f(gamma)a(exp 2)/eta, is the density ratio rho(sub p)/rho(sub f). Of interest is to understand the separate roles of particle (St) and fluid (Re) inertia in the dynamics of suspensions. In this study we focus on heavy particles, rho(sub p)/rho(sub f) much greater than 1, for which the Stokes number is finite, but the Reynolds number is sufficiently small for inertial forces in the fluid to be neglected; thus, the fluid motion is governed by the Stokes equations. On the other hand, the probability density governing the statistics of the suspended particles satisfies a Fokker-Planck equation that accounts for both configuration and momentum coordinates, the latter being essential for finite St. The solution of the Fokker-Planck equation is obtained to O(St) via a Chapman-Enskog type-procedure, and the conditional velocity distribution so obtained is used to derive a configuration-space Smoluchowski equation with inertial corrections. The inertial effects are responsible for asymmetry in the relative trajectories of two spheres in shear flow, in contrast to the well known symmetric structure in the absence of inertia. Finite St open trajectories in the plane of shear suffer a downward lateral displacement resulting from the inability of a particle of finite mass to follow the curvature of the zero-Stokes-number pathlines. In addition to the induced asymmetry, the O(St) inertial perturbation dramatically alters the nature of the near-field trajectories. The stable closed orbits (for St = 0) in the plane of shear now spiral in, approaching particle-particle contact in the limit. All trajectories starting from an initial offset of O(St(sup 1/2) or less (which remain open for St = 0) also spiral in. The asymmetry of the trajectories leads to a non-Newtonian rheology and diffusive behavior. The latter because a given particle (moving along a finite St open trajectory) suffers a net displacement in the transverse direction after a single interaction. A sequence of such uncorrelated displacements leads to the particle executing a random walk. The inertial diffusivity tensor is anisotropic on account of differing strengths of interaction in the gradient and vorticity directions. Since the entire region (constituting an in finite area) of closed orbits in the plane of shear spirals onto contact for #finite St, the latter represents a singular surface for the pair-distribution function. The exact form of the pair-distribution function at contact is still, however, indeterminate in the absence of non-hydrodynamic effects. It should also be noted that finite St non-rectilinear flows do not support a spatially uniform number density owing to the cross-streamline inertial migration of particles.

J. F. Brady↗

Closing in on critical net-baryon fluctuations at LHC energies: Cumulants up to third order in Pb–Pb collisions

Fluctuation measurements are important sources of information on the mechanism of particle production at LHC energies. This article reports the first experimental results on third-order cumulants of the net-proton distributions in Pb–Pb collisions at a center-of-mass energy $\sqrt{s_{NN}}$ = 5.02 TeV recorded by the ALICE detector. The results on the second-order cumulants of net-proton distributions at $\sqrt{s_{NN}}$ = 2.76 and 5.02 TeV are also discussed in view of effects due to the global and local baryon number conservation. The results demonstrate the presence of long-range rapidity correlations between protons and antiprotons. Such correlations originate from the early phase of the collision. The experimental results are compared with HIJING and EPOS model calculations, and the dependence of the fluctuation measurements on the phase-space coverage is examined in the context of lattice quantum chromodynamics (LQCD) and hadron resonance gas (HRG) model estimations. The measured third-order cumulants are consistent with zero within experimental uncertainties of about 4% and are described well by LQCD and HRG predictions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A box model for representing estuarine physical processes in Earth system models

Appropriately treating riverine freshwater discharge into the oceans in Earth system models is a challenging problem. Commonly, the river runoff is discharged into the ocean models with zero salinity and arbitrarily distributed either horizontally or vertically over several grid cells. Those approaches entirely neglect estuarine physical processes that modify river inputs before they reach the open ocean. Here in order to realistically represent riverine freshwater inputs in Earth system models, a physically based Estuary Box Model (EBM) is developed to parameterize the mixing processes in estuaries. The EBM represents the estuary exchange circulation with a two-layer box structure. It takes as input the river volume flux from the land surface model and the subsurface salinity at the estuary mouth from the ocean model. It delivers the estuarine outflow salinity and net volume flux into and out of the estuary to the ocean model. An offline test of the EBM forced with observed conditions for the Columbia River system shows good agreement with observations of outflow salinity and high-resolution simulations of the exchange flow volume flux. To illustrate the practicality of use of the EBM in an Earth system model, the EBM is implemented for all coastal grid cells with river runoff in the Community Earth System Model (CESM). Compared to the standard version of CESM, which treats runoff as an augmentation to precipitation, the EBM increases sea surface salinity and reduces stratification near river mouths. The EBM also leads to significant regional and remote changes in CESM ocean surface salinities.

54 ENVIRONMENTAL SCIENCES↗

Anisotropic Superfluidity in a Dipolar Bose Gas

We study the superfluid character of a dipolar Bose-Einstein condensate (DBEC) in a quasi-two dimensional geometry. We consider the dipole polarization to have some nonzero projection into the plane of the condensate so that the effective interaction is anisotropic in this plane, yielding an anisotropic dispersion relation. By performing direct numerical simulations of a probe moving through the DBEC, we observe the sudden onset of drag or creation of vortex-antivortex pairs at critical velocities that depend strongly on the direction of the probe's motion. This anisotropy emerges because of the anisotropic manifestation of a rotonlike mode in the system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Measurement of fifth- and sixth-order fluctuations of (net-)proton number in Au + Au collisions from phase II of the beam energy scan program at RHIC

We report high-statistics measurements of fifth- and sixth-order factorial cumulants and cumulant ratios of (net-)proton multiplicity distributions in Au+Au collisions at $\sqrt{s_{NN}}$ = 7.7–27GeV, using data from the STAR experiment collected during the Beam Energy Scan Phase II at RHIC. Protons and antiprotons are identified at midrapidity (|𝑦| < 0.5) with transverse momentum 0.4 < 𝑝 𝑇 < 2.0GeV/𝑐. The proton factorial cumulants 𝜅 4 , 𝜅 5 , and 𝜅 6 increase with order but exhibit no sign alternation within current uncertainties, offering no evidence for a two-component structure in the proton multiplicity distribution, as might be expected near a first-order phase transition. The cumulant ratios 𝐶 5 /𝐶 1 and 𝐶 6 /𝐶 2 fluctuate around zero in collisions at 0–40% centrality. The results are consistent with both the negative predictions from lattice QCD and the positive trends obtained from the ultrarelativistic quantum molecular dynamics (UrQMD) model. At $\sqrt{s_{NN}}$ ≳ 27GeV, the 𝐶 4 /𝐶 2 and 𝐶 5 /𝐶 1 results are compatible with predictions from lattice QCD, functional renormalization group (FRG), and hadron resonance gas (HRG) models, while UrQMD describes the data better at lower energies. Here, these measurements place constraints on baryon number fluctuations and offer valuable insights into the QCD phase structure.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗