Search NASA⌕ Search

SEARCH · Search NASA

Results for “Particle methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

Erosion Experimentation in Solar Power Systems

An alternate and sustainable form of energy is concentrated solar power (CSP) systems, which capture and store the sun’s energy in the form of heat. To increase the efficiency and overall cost of the plant, particles were used as a heat transfer medium. As particles flow through this system, the movement of particles creates erosion, in the forms of abrasion and attrition. Experiments were tested at room temperature and 800 degrees Celsius for both abrasion wear and attrition erosion. In abrasion wear, specimens were placed inside a container, particles were added, and the specimen rotated in and out of the particles. In attrition erosion, a steel disk rotated amongst particles which resulted in particles rubbing against each other. Abrasion wear increased when temperature increased while attrition showed that the particles broke down as the amount of time increased. For attrition at 800 degrees Celsius, oxide was increased and mixed with the particles. Durability models will be created to predict attrition and abrasion based on the particle and specimen mechanical properties. This discovery shows that this method of utilizing particles for CSP plants would improve efficiency and decrease overall costs.

14 SOLAR ENERGY↗

Riverine Plastic Pollution: Sampling and Analysis Methods

Riverine plastic pollution has been found in all major U.S. rivers, but the exact amount of plastic being released to the oceans has not been quantified. Field studies conducted in U.S. rivers have used a range of sampling and analysis techniques and rarely measured the mass of the plastic collected. Measurements of riverine plastic pollution are needed to calibrate and validate models used to estimate the U.S. riverine plastic emissions to the oceans. This report surveys measurement methods used to quantify riverine pollution and current estimates of U.S. riverine plastic pollution from measurements and models. Measurement methods include field sampling and laboratory analysis. Field sampling methods are described for large (macro) and small (micro) plastic particles. Laboratory analysis methods are described for macro and microplastic with an emphasis on the detailed characterization processes of microplastics. Waterborne leachate analysis is also briefly described. Three models are described that estimate plastic pollution based on mismanaged plastic waste in the river catchment basins. The models were validated and calibrated with global data sources. The data sources were predominantly outside of the U.S., where the magnitude and composition of plastic pollution is different than what is found in U.S. rivers. Comprehensive measurements of riverine plastics are needed not only to characterize the riverine plastic pollution, but also parameterize and validate models of plastic fate and transport. This report also describes five key U.S. rivers that span a range of sizes and environmental conditions that could be sampled to obtain data to support characterization and model development of plastic pollution from rivers to oceans. Sampling and analysis protocol recommendations are made to ensure the highest quality of data are collected in the five rivers.

54 ENVIRONMENTAL SCIENCES↗

Effect of particle presence on the incompressible inviscid flow through a two dimensional compressor cascade

A computational model for calculating the flow field, in the presence of solid particles, through a two dimensional compressor cascade is presented. The method treats the particle phase in the Lagrangian system and the fluid phase in the Eulerian system. The equations of momentum of the fluid phase are modified to account for the momentum exchange between the two phases. The resulting modified momentum and continuity equations are reduced to the conventional stream function-vorticity formulation. The analysis yields the change in the blade surface pressure distribution, the total pressure and velocity in the flow field. Based on this, it is possible to predict the decrease in compressor performance under the presence of particles.

Balan, C.↗

Faddeev random-phase approximation for molecules

The Faddeev random-phase approximation is a Green's function technique that makes use of Faddeev equations to couple the motion of a single electron to the two-particle-one-hole and two-hole-one-particle excitations. This method goes beyond the frequently used third-order algebraic diagrammatic construction method: all diagrams involving the exchange of phonons in the particle-hole and particle-particle channel are retained, but the phonons are now described at the level of the random-phase approximation, which includes ground-state correlations, rather than at the Tamm-Dancoff approximation level, where ground-state correlations are excluded. Previously applied to atoms, this paper presents results for small molecules at equilibrium geometry.

74 ATOMIC AND MOLECULAR PHYSICS↗

Meshfree simulation and experimental validation of extreme thermomechanical conditions in friction stir extrusion

Abstract Friction stir extrusion (FSE) is a novel solid-phase processing technique that consolidates and extrudes metal powders, flakes, chips, or billets into high-performance parts by plastic deformation, which has the potential to save substantial processing time and energy. Currently, most studies on FSE are experimental and only a few numerical models have been developed to explain and predict the complex physics of the process. In this work, a meshfree simulation framework based on smoothed particle hydrodynamics (SPH) was developed for FSE. Unlike traditional grid-based methods, SPH is a Lagrangian particle-based method that can handle severe material deformations, capture moving interfaces and surfaces, and monitor the field variable histories explicitly without complicated tracking schemes. These aspects of SPH make it attractive for the FSE process, where in situ evolution of field variables is difficult to observe experimentally. To this end, a 3-D, fully thermomechanically coupled SPH model was developed to simulate the FSE of aluminum wires. The developed model was thoroughly validated by comparing the numerically predicted material flow, strain, temperature history, and extrusion force with experimental results for a certain set of process parameters. The validated SPH model can serve as an effective tool to predict and better understand the extreme thermomechanical conditions during the FSE process.

99 GENERAL AND MISCELLANEOUS↗

Synthesis, Characterization, and Catalytic Oxygen Electroreduction Activities of Carbon-Supported PtW Nanoparticle Catalysts

Carbon-supported PtW (PtW/C) alloy nanoparticle catalysts with well-controlled particle size, dispersion, and composition uniformity, have been synthesized by wet chemical methods of decomposition of carbonyl cluster complexes, hydrolysis of metal salts, and chemical reactions within a reverse microemulsion. The synthesized PtW/C catalysts were characterized by X-ray diffraction, high-resolution transmission electron microscopy, and energy-dispersive spectroscopy. The catalytic oxygen electroreduction activities were measured by the hydrodynamic rotating disk electrode technique in an acidic electrolyte. The influence of the synthesis method on PtW particle size, size distribution, composition uniformity, and catalytic oxygen electroreduction activity, have been investigated. Among the synthesis methods studied, PtW/C catalysts prepared by the decomposition of carbonyl cluster complexes displayed the best platinum mass activity for oxygen reduction reaction under the current small scale production; a 3.4-fold catalytic enhancement was achieved in comparison to a benchmark Pt/C standard.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pyrolysis fuels and methods for processing pyrolysis fuels

Pyrolysis fuels and methods for processing pyrolysis fuel are provided. In one embodiment, a method of processing pyrolysis fuel converts biomass to pyrolysis fuel including pyrolysis oil and char particles. Also, the method includes resizing a portion of the char particles so that substantially all resized char particles have a largest dimension no greater than about 5 microns.

Baird, Lance Awender↗

Separation of nanoparticles via acoustofluidic flow relocation

The present disclosure describes a method of separating particles using a combination of acoustophoresis and acoustic fluid relocation. The disclosure also describes a microfluidic device that can be used to separate particles using a combination of acoustophoresis and acoustic fluid relocation. The disclosure describes methods of separating nanoparticles, microparticles, nanoparticles from microparticles, and micron-sized particles from sub-micron-sized particles.

Piyasena, Menake E.↗

Fuel cell catalyst

A method is provided for making a supported catalyst comprising nanostructured elements which comprise microstructured support whiskers bearing nanoscopic catalyst particles, where the method comprises step a) of vacuum deposition of material from at least a first carbon target in the presence of nitrogen and step b) of vacuum deposition of material from a second target comprising at least one transition metal, the second target comprising no precious metals. In one embodiment, step a) is carried out prior to step b). In another embodiment, steps a) and b) are carried out simultaneously. Typically the deposition steps are carried out in the absence of oxygen. Typically, the transition metal is iron or cobalt, and most typically iron. The present disclosure also provides a supported catalyst comprising nanostructured elements which comprise microstructured support whiskers bearing nanoscopic catalyst particles made according to the present method. The present disclosure also provides a fuel cell membrane electrode assembly comprising the present supported catalyst.

36 MATERIALS SCIENCE↗

Particle simulation for direct plasma injection in a radio frequency quadrupole matching section

We have been investigating direct plasma injection scheme (DPIS) for high-intensity heavy-ion beam acceleration. In the DPIS, laser-produced plasma is directly injected into a radio frequency quadrupole (RFQ) linac. To study the beam dynamics of the ion injection in the DPIS, we tracked particle motions in the RFQ matching section using three-dimensional particle-in-cell method. As a result of the numerical simulation, we found that the electrostatic field generated by the extraction electrode reduces the transmission efficiency. To avoid the radially defocusing force, the input beam into the RFQ has to be initially convergent. In the DPIS, further optimization of the plasma density is required for better matching.

43 PARTICLE ACCELERATORS↗

Transverse-Momentum and Pseudorapidity Distributions of Charged Hadrons in pp Collisions at {radical}(s)=7 TeV

Charged-hadron transverse-momentum and pseudorapidity distributions in proton-proton collisions at {radical}(s)=7 TeV are measured with the inner tracking system of the CMS detector at the LHC. The charged-hadron yield is obtained by counting the number of reconstructed hits, hit pairs, and fully reconstructed charged-particle tracks. The combination of the three methods gives a charged-particle multiplicity per unit of pseudorapidity dN{sub ch}/d{eta}|{sub |{eta}|<0.5}=5.78{+-}0.01(stat){+-}0.23(syst) for non-single-diffractive events, higher than predicted by commonly used models. The relative increase in charged-particle multiplicity from {radical}(s)=0.9 to 7 TeV is [66.1{+-}1.0(stat){+-}4.2(syst)]%. The mean transverse momentum is measured to be 0.545{+-}0.005(stat){+-}0.015(syst) GeV/c. The results are compared with similar measurements at lower energies.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Falling particle receiver systems with mass flow control

The present disclosure is directed to systems and methods to control particle mass flow rate in solar receivers and associated heat exchangers based on feedback from one or more temperatures of particles in the system.

Ho, Clifford K.↗

Center for Gyrokinetic/MHD Hybrid Simulation of Energetic Particle Physics in Toroidal Plasmas (Final Report)

At Colorado University-Boulder the primary task is to extend our gyrokinetic Particle-in-Cell simulation of tokamak micro-turbulence and transport to the area of energetic particle physics. We have implemented a gyrokinetic ion/massless fluid electron hybrid model in the global δƒ-PIC code GEM, and benchmarked the code with analytic results on the thermal ion radiative damping rate of Toroidal Alfvén Eigenmodes (TAE) and with mode frequency and spatial structure from eigenmode analysis. We also performed nonlinear simulations of both a single-n mode (n is the toroidal mode number) and multiple-n modes, and in the case of single-n, benchmarked the code on the saturation amplitude vs. particle collision rate with analytical theory. Most simulations use the f method for both ions species, but we have explored the full-ƒ method for energetic particles in cases where the burst amplitude of the excited instabilities is large as to cause significant re-distribution or loss of the energetic particles. We used the hybrid model to study the stability of high-n TAEs in ITER. Our simulations show that the most unstable modes in ITER lie in the rage of 10 < n < 20. Thermal ion pressure effect and alpha particles non-perturbative effect are important in determining the mode radial location and stability threshold. The thermal ion Landau damping rate and radiative damping rate from the simulations are compared with analytical estimates. The thermal ion Landau damping is the dominant damping mechanism. Plasma elongation has a strong stabilizing effect on the alpha driven TAEs. The central alpha particle pressure threshold for the most unstable n=15 mode is about β α (0) = 0.7% for the fully shaped ITER equilibrium. We also carried nonlinear simulations of the most unstable n = 15 mode and found that the saturation amplitude for the nominal ITER discharge is too low to cause large redistribution or loss of alpha particles. To include kinetic electron effects in the hybrid model we have studied a kinetic electron closure scheme for the fluid electron model. The most important element of the closure scheme is a complete Ohm’s law for the parallel electric field E || , derived by combining the quasi-neutrality condition, the Ampere’s equation and the v || moment of the gyrokinetic equations. A discretization method for the closure scheme is studied in detail for a three-dimensional shear-less slab plasma. It is found that for long-wavelength shear Alfvén waves the kinetic closure scheme is both more accurate and robust than the previous GEM algorithm using the split-scheme, whereas for the ion-gradient-driven instability the previous algorithm is more efficient. This kinetic electron closure scheme will be implemented in GEM in the future. We have studied the beam driven Reverse Shear Alfven Eigenmodes (RSAE) observed in DIII-D discharge 142111. For this purpose a new scheme for obtaining the electric potential is implemented, i.e., by solving the gyrokinetic moment (GKM) equation, which is essentially the equation for $∂\phi/∂t$ used in GEM’s split-weight scheme, and then integrating in time. Due to charge-neutrality the ExB motions of the equilibrium densities of all species cancel each other and do not cause charge separation if there is no finite Larmor radius effect. The advantage of solving the GKM equation is that this lowest-order cancellation can be made explicit. The GKM approach is found to be more accurate and robust. GEM simulations have reproduced many features of RSAE seen in the experiment, such as frequency chirping and the chirping range. It has been reported by other simulation codes that the shearing direction of the mode structure in the poloidal plane disagrees with observation. We found that the mode structure, including the shearing in the poloidal plane, is in general sensitive to the beam distribution. Using the same beam density profile as in other codes but with a slowing-down distribution in velocity, GEM simulations reproduce the mode shearing direction seen in the experiment. We have carried out extensive nonlinear simulations of RSAE.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Numerical experiments on unstructured PIC stability.

Particle-In-Cell (PIC) is a method for plasmas simulation. Particles are pushed with Verlet time integration. Fields are modeled using finite differences on a tensor product mesh (cells). The Unstructured PIC methods studied here use instead finite element discretizations on unstructured (simplicial) meshes. PIC is constrained by stability limits (upper bounds) on mesh and time step sizes. Numerical evidence (2D) and analysis will be presented showing that similar bounds constrain unstructured PIC.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Influence of dynamical parameters on pre-scission particles and fission probability in heavy-ion collisions

A stochastic approach to fission dynamics based on one- and three-dimensional Langevin equations was applied to calculate the fission probability and the pre-scission particle multiplicity. Evaporation of pre-scission light particles along Langevin fission trajectories from the ground state of the compound nucleus to its scission and fission probability have been calculated using a Monte Carlo simulation technique. To examine this approach we used {sup 19}F+{sup 181}Ta and {sup 16}O+{sup 197}Au systems. Our results show that the fission probability and pre-scission particle multiplicity in three dimensions is different from the one-dimensional Langevin approach. The theoretical results of pre-scission neutron, proton, and {alpha}-particle multiplicities and the fission probability for given systems based on this model are compared with available experimental data. The obtained results using three-dimensional calculations are in better agreement with experimental data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Accurately simulating nine-dimensional phase space of relativistic particles in strong fields

Next-generation high-power laser systems that can be focused to ultra-high intensities exceeding 10 23 W/cm 2 are enabling new physics regimes and applications. The physics of how these lasers interact with matter is highly nonlinear, relativistic, and can involve lowest-order quantum effects. The current tool of choice for modeling these interactions is the particle-in-cell (PIC) method. In the presence of strong electromagnetic fields, the motion of charged particles and their spin is affected by radiation reaction (either the semi-classical or the quantum limit). Standard (PIC) codes usually use Boris or similar operator-splitting methods to advance the particles in standard phase space. These methods have been shown to require very small time steps in the strong-field regime in order to obtain accurate results. In addition, some problems require tracking the spin of particles, which creates a nine-dimensional (9D) particle phase space, i.e., (x, u, s). Therefore, numerical algorithms that enable high-fidelity modeling of the 9D phase space in the strong-field regime (where both the spin and momentum evolution are affected by radiation reaction) are desired. Here we present a new particle pusher that works in 9D and 6D phase space (i.e., with and without spin) based on analytical rather than leapfrog solutions to the momentum and spin advance from the Lorentz force, together with the semi-classical form of radiation reaction in the Landau-Lifshitz equation and spin evolution given by the Bargmann-Michel-Telegdi equation. Analytical solutions for the position advance are also obtained, but these are not amenable to the staggering of space and time in standard PIC codes. These analytical solutions are obtained by assuming a locally uniform and constant electromagnetic field during a time step. The solutions provide the 9D phase space advance in terms of a particle's proper time, and a mapping is used to determine the proper time step duration for each particle as a function of the lab frame time step. Due to the analytical integration of particle trajectory and spin orbit, the constraint on the time step needed to resolve trajectories in ultra-high fields can be greatly reduced. The time step required in a PIC code for accurately advancing the fields may provide additional constraints. We present single-particle simulations to show that the proposed particle pusher can greatly improve the accuracy of particle trajectories in 6D or 9D phase space for given laser fields. We have implemented the new pusher into the PIC code Osiris. Example simulations show that the proposed pusher provides improvement for a given time step. A discussion on the numerical efficiency of the proposed pusher is also provided.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Preparation for Scaling Studies of Ice-Crystal Icing at the NRC Research Altitude Test Facility

This paper describes experiments conducted at the National Research Council (NRC) of Canadas Research Altitiude Test Facility between March 26 and April 11, 2012. The tests, conducted collaboratively between NASA and NRC, focus on three key aspects in preparation for later scaling work to be conducted with a NACA 0012 airfoil model in the NRC Cascade rig: (1) cloud characterization, (2) scaling model development, and (3) ice-shape profile measurements. Regarding cloud characterization, the experiments focus on particle spectra measurements using two shadowgraphy methods, cloud uniformity via particle scattering from a laser sheet, and characterization of the SEA Multi-Element probe. Overviews of each aspect as well as detailed information on the diagnostic method are presented. Select results from the measurements and interpretation are presented which will help guide future work.

Ice formation↗