Search NASA⌕ Search

SEARCH · Search NASA

Results for “Perturbative methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

A Monte Carlo study of photochemical model uncertainties affecting the calculation of subsonic perturbations in the upper troposphere

Monte Carlo methods are frequently applied to the evaluation of uncertainties in models with multiple inputs that themselves have associated imprecisions. In the case of photochemical models used to evaluate changes in O3 or OH, inputs analyzed include rate coefficients measured in the laboratory, and chemical and physical constituents measured in the atmosphere. The Monte Carlo method was used with the 1-dimensional GSFC tropospheric photochemical model to examine uncertainty propagation to calculation of NO(x) and the major oxidants (O3, OH) in the upper troposphere. In all cases chemical kinetics inputs are varied and the NO(x) perturbation of a subsonic fleet is simulated. A series of model runs is used to explore sensitivities of model-computed parameters to other parameters: heterogeneous processes, the uncertainty in upper tropospheric H2O vapor measurements, aircraft emissions at different latitudes.

Thompson, Anne M.↗

Analysis of Fourth-, Fifth-, and Infinite-Order Triple Excitations in Unitary Coupled Cluster Theory

Here, in this work, we introduce a perturbative correction to the unitary coupled cluster method with single and double excitations (UCCSD) that incorporates the effects of missing triple excitations through fifth-order in many-body perturbation theory (MBPT). Referred to as UCCSD[T-5], this method is benchmarked alongside the previously developed UCCSD[T] to lend insight into the behavior of perturbative triples corrections relative to UCCSDT, which inherently provides an infinite-order treatment of triple excitations, as well as full configuration interaction (FCI). Two key findings emerge from this analysis. First, UCCSD[T] consistently yields ground-state energies in closest agreement with FCI, outperforming both UCCSD[T-5] and UCCSDT. Second, UCCSD[T-5] largely emulates the behavior of UCCSDT, suggesting a close relationship between fifth- and infinite-order triple-excitation contributions. Given the growing interest in UCC ansätze for quantum computing and the limitations of current quantum hardware, these results highlight the potential of classically computed perturbative corrections within UCC theory to capture triple-excitation effects without the additional quantum resources required by the UCCSDT ansatz.

Windom, Zachary W. [Oak Ridge National Laboratory ↗

Thermal instabilities in protogalactic clouds

The means by which a protogalaxy can fragment to form the first generation of stars and globular clusters remains an important problem in astrophysics. Gravitational instabilities grow on timescales too long to drive fragmentation before the background density grows by many orders of magnitude (see Murray and Lin 1989a, and references therein). Thermal instability provides a much more likely mechanism. After its initial collapse, a protogalactic cloud is expected to be shock heated to its virial temperature approx. 10(exp 6) K. Cooling by H and He+ below 10(exp 6) K has a negative slope, so that the cloud is subject to strong thermal instabilities. Density enhancements may then grow rapidly, fragmenting the protogalaxy as it cools to lower temperatures. The role of dynamical effects upon the growth of perturbations is considered here. The method used is similar to that used in Murray and Lin (1989a; see also the Erratum to appear September 15), which examined the growth of thermal instabilities with a one-dimensional Lagrangian hydrodynamics code, written for spherical symmetry. Perturbed regions therefore take the form of shells. The dynamical variables are integrated explicitly, while the temperature, ionization fraction, and molecular fraction are integrated implicitly, and account is taken for non-equilibrium values of these quantities.

Murray, S. D.↗

A global ab initio potential energy surface for the X{sup 2}A{sup ′} ground state of the Si + OH → SiO + H reaction

We report the first global potential energy surface (PES) for the X{sup 2}A{sup ′} ground electronic state of the Si({sup 3}P) + OH(X{sup 2}Π) → SiO(X{sup 1}Σ{sub g}{sup +}) + H({sup 2}S) reaction. The PES is based on a large number of ab initio energies obtained from multireference configuration interaction calculations plus Davidson correction (MRCI+Q) using basis sets of quadruple zeta quality. Corrections were applied to the ab initio energies in the reactant channel allowing a proper description of long-range interactions between Si({sup 3}P) and OH(X{sup 2}Π). An analytical representation of the global PES has been developed by means of the reproducing kernel Hilbert space method. The reaction is found barrierless. Two minima, corresponding to the SiOH and HSiO isomers, and six saddle points, among which the isomerization transition state, have been characterized on the PES. The vibrational spectra of the SiOH/HSiO radicals have been computed from second-order perturbation theory and quantum dynamics methods. The structural, energetic, and spectroscopic properties of the two isomers are in good agreement with experimental data and previous high quality calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Feasibility study of a single, elliptical heliocentric Earth-Mars trajectory

The initial intent of this design project was to evaluate the existence and feasibility of a single elliptical heliocentric Earth/Mars trajectory. This trajectory was constrained to encounter Mars twice in its orbit, within a time interval of 15 to 180 Earth days between encounters. The single ellipse restriction was soon found to be prohibitive for reasons shown later. Therefore, the approach taken in the design of the round-trip mission to Mars was to construct single-leg trajectories which connected two planets on two prescribed dates. Three methods of trajectory design were developed. Method 1 is an eclectic approach and employs Gaussian Orbit Determination (Method 1A) and Lambert-Euler Preliminary Orbit Determination (Method 1B) in conjunction with each other. Method 2 is an additional version of Lambert's Solution to orbit determination, and both a coplanar and a noncoplanar solution were developed within Method 2. In each of these methods, the fundamental variables are two position vectors and the time between the position vectors. In all methods, the motion was considered Keplerian motion and the reference frame origin was located at the sun. Perturbative effects were not considered in Method 1. The feasibility study of round-trip Earth/Mars trajectories maintains generality by considering only heliocentric trajectory parameters and planetary approach conditions. The coordinates and velocity components of the planets, for the standard epoch J2000, were computed from an approximate set of osculating elements by the procedure outlined in an ephemeris of coordinates.

Blake, M.↗

Theoretical study of the CO 2 –O 2 van der Waals complex: potential energy surface and applications

A four-dimensional-potential energy surface (4D-PES) of the atmospherically relevant carbon dioxide–oxygen molecule (CO 2 –O 2 ) van der Waals complex is mapped using the ab initio explicitly correlated coupled cluster method with single, double, and perturbative triple excitations (UCCSD(T)-F12b), and extrapolation to the complete basis set (CBS) limit using the cc-pVTZ-F12/cc-pVQZ-F12 bases and the l –3 formula. An analytic representation of the 4D-PES was fitted using the method of interpolating moving least squares (IMLS). These calculations predict that the most stable configuration of CO 2 –O 2 complex corresponds to a planar slipped-parallel structure with a binding energy of V ~ –243 cm –1 . Another isomer is found on the PES, corresponding to a non-planar cross-shaped structure, with V ~ –218 cm –1 . The transition structure connecting the two minima is found at V ~ –211 cm –1 . We also performed comparisons with some CO 2 –X van der Waals complexes. Moreover, we provide a SAPT analysis of this molecular system. Then, we discuss the complexation induced shifts of CO 2 and O 2 . Afterwards, this new 4D-PES is employed to compute the second virial coefficient including temperature dependence. A comparison between quantities obtained in our calculations and those from experiments found close agreement attesting to the high quality of the PES and to the importance of considering a full description of the anisotropic potential for the derivation of thermophysical properties of CO 2 –O 2 mixtures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A wave-envelope technique for wave propagation in non-uniform ducts

The method of variation of parameters is used to analyze wave propagation in variable area, plane ducts with no mean flow. The method has an explicit representation of the fast axial variation of the acoustic modes, and numerical integration is required only for the slower axial variations of the mode amplitudes and phases. Results are presented which demonstrate the numerical advantages of the method. Comparison of the results with those of a small perturbation theory are given. The relationship between this method and the method of weighted residuals is discussed.

Kaiser, J. E.↗

Application of step-response lambda tuning to proportional-integral controllers in water resource recovery facilities

Proportional-integral-derivative (PID) controllers in water resource recovery facilities (WRRFs) feedback control loops are commonplace. While simple to implement, such control loops are rarely tuned optimally or systematically. Heuristic tuning approaches are commonly applied with varying degrees of success using trial-and-error, ad hoc tuning rules, or duplication of tuning values from a similar system. However, there are effective methods, such as lambda tuning, produce acceptable tuning with limited effort. These are based on the step-response method, where a manual process perturbation is used to define the relationship between the manipulated and controlled variables. Based on such an experiment, a simple process model is constructed and used to determine the controller tuning values. In this work, we used the step-response method and lambda tuning for two control systems in full-scale WRRFs. This led to responsive and stable behavior of the controlled system as defined by the absolute average error of the controlled variable to setpoint and standard deviation of the manipulated variable. Tuning of feedback control loops can be completed successfully through a systematic approach, and this work suggests that tuning tools, like lambda, should be part of all wastewater treatment control engineers' toolbox.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

State-of-the-art ab initio potential energy curve for the krypton atom pair and thermophysical properties of dilute krypton gas

A new reference krypton-krypton interatomic potential energy curve was developed by means of quantum-chemical ab initio calculations for 36 interatomic separations. Highly accurate values for the interaction energies at the complete basis set limit were obtained using the coupled-cluster method with single, double, and perturbative triple excitations as well as t-aug-cc-pV5Z and t-aug-cc-pV6Z basis sets including mid-bond functions, with the 6Z basis set being newly constructed for this study. Higher orders of coupled-cluster terms were considered in a successive scheme up to full quadruple excitations. Core-core and core-valence correlation effects were included. Furthermore, relativistic effects were studied not only at a scalar relativistic level using second-order direct perturbation theory, but also utilizing full four-component and Gaunt-effect computations. An analytical pair potential function was fitted to the interaction energies, which is characterized by a depth of 200.88 K with an estimated standard uncertainty of 0.51 K. Thermophysical properties of low-density krypton were calculated for temperatures up to 5000 K. Second and third virial coefficients were obtained from statistical thermodynamics. Viscosity and thermal conductivity as well as the self-diffusion coefficient were computed using the kinetic theory of gases. The theoretical results are compared with experimental data and with results for other pair potential functions from the literature, especially with those calculated from the recently developed ab initio potential of Waldrop et al. [J. Chem. Phys. 142, 204307 (2015)]. Highly accurate experimental viscosity data indicate that both the present ab initio pair potential and the one of Waldrop et al. can be regarded as reference potentials, even though the quantum-chemical methods and basis sets differ. However, the uncertainties of the present potential and of the derived properties are estimated to be considerably lower.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stochastic fluctuation and transport of tokamak edge plasmas with the resonant magnetic perturbation field

Here we present that a statistical method known as the complexity–entropy analysis is useful to characterize a state of plasma turbulence and flux in the resonant magnetic perturbation (RMP) edge localized mode (ELM) control experiment. The stochastic pedestal top temperature fluctuation in the RMP ELM suppression phase is distinguished from the chaotic fluctuation in the natural ELM-free phase. It is discussed that the stochastic temperature fluctuation can be originated from the narrow layer of the field penetration on the pedestal top. The forced magnetic island can emit the resonant drift wave of comparable sizes (relatively low-k) in the RMP ELM suppression phase, and it can result in the generation of stochastic higher wavenumber fluctuations coupled to tangled fields around the island. The analysis of the ion saturation current measurement around the major outer striking point on the divertor shows that it also becomes more stochastic as the stronger plasma response to the RMP field is expected.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electron-impact double ionization of magnesium

Theory and experiment are compared for the electron-impact double ionization of Mg. Direct ionization cross sections, involving the simultaneous ionization of both 3s electrons, are calculated using a non-perturbative time-dependent close-coupling method. Indirect ionization cross sections, involving the ionization of either a 2p or 2s electron followed by autoionization, are calculated using a perturbative time-independent distorted-wave method. At low energies the direct ionization cross sections are found to be in good agreement with experiments, while at the higher energies the indirect ionization cross sections are also found to be in good agreement with experiments.

Optics↗

One-particle many-body Green’s function theory: Algebraic recursive definitions, linked-diagram theorem, irreducible-diagram theorem, and general-order algorithms

A thorough analytical and numerical characterization of the whole perturbation series of one-particle many-body Green’s function (MBGF) theory is presented in a pedagogical manner. Three distinct but equivalent algebraic (first-quantized) recursive definitions of the perturbation series of the Green’s function are derived, which can be combined with the well-known recursion for the self-energy. Six general-order algorithms of MBGF are developed, each implementing one of the three recursions, the ΔMPn method (where n is the perturbation order) [S. Hirata et al., J. Chem. Theory Comput. 11, 1595 (2015)], the automatic generation and interpretation of diagrams, or the numerical differentiation of the exact Green’s function with a perturbation-scaled Hamiltonian. They all display the identical, nondivergent perturbation series except ΔMPn, which agrees with MBGF in the diagonal and frequency-independent approximations at 1 ≤ n ≤ 3 but converges at the full-configuration-interaction (FCI) limit at n=∞ (unless it diverges). Numerical data of the perturbation series are presented for Koopmans and non-Koopmans states to quantify the rate of convergence towards the FCI limit and the impact of the diagonal, frequency-independent, or ΔMPn approximation. The diagrammatic linkedness and thus size-consistency of the one-particle Green’s function and self-energy are demonstrated at any perturbation order on the basis of the algebraic recursions in an entirely time-independent (frequency-domain) framework. The trimming of external lines in a one-particle Green’s function to expose a self-energy diagram and the removal of reducible diagrams are also justified mathematically using the factorization theorem of Frantz and Mills. Equivalence of ΔMPn and MBGF in the diagonal and frequency-independent approximations at 1 ≤ n ≤ 3 is algebraically proven, also ascribing the differences at n = 4 to the so-called semi-reducible and linked-disconnected diagrams

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Predicting Spacecraft Trajectories by the WeavEncke Method

A combination of methods is proposed of predicting spacecraft trajectories that possibly include multiple maneuvers and/or perturbing accelerations, with greater speed, accuracy, and repeatability than were heretofore achievable. The combination is denoted the WeavEncke method because it is based on unpublished studies by Jonathan Weaver of the orbit-prediction formulation of the noted astronomer Johann Franz Encke. Weaver evaluated a number of alternatives that arise within that formulation, arriving at an orbit-predicting algorithm optimized for complex trajectory operations. In the WeavEncke method, Encke's method of prediction of perturbed orbits is enhanced by application of modern numerical methods. Among these methods are efficient Kepler s-equation time-of-flight solutions and self-starting numerical integration with time as the independent variable. Self-starting numerical integration satisfies the requirements for accuracy, reproducibility, and efficiency (and, hence, speed). Self-starting numerical integration also supports fully analytic regulation of integration step sizes, thereby further increasing speed while maintaining accuracy.

Weaver, Jonathan K.↗

SU-E-T-350: Effective Point of Measurement and Total Perturbation Correction P for Parallel-Plate Ion Chambers in High-Energy Photon Beams

Purpose: This paper aims to determine the effective point of measurement and the total perturbation correction p of parallel-plate chambers for clinical photon dosimetry. Methods: The effective point of measurement (EPOM) was calculated using the EGSnrc Monte Carlo code system with the EGSnrc user code egs- chamber. Depth dose curves of the ionization chambers were calculated in a water phantom for several high energy photon spectra (4, 6, 10, 15, 18 MV-X). Different normalization criterions (normalization to the maximum of the depth dose curve and normalization to the value in 10 cm depth) have been applied. The EPOM was determined by shifting the normalized depth dose curve of a small water voxel against the depth ionization curve until the disagreement (calculated by the root mean square deviation) reaches a minimum. In addition, the total perturbation correction p was calculated by the ratio of the dose to water and the product of the dose determined in the chamber and the water to air stopping power ratio. Results: The EPOM varied slightly depending on the chosen normalization criterion. For all chambers the necessary shift of the EPOM decreased linearly with increasing beam quality specifier TPR{sub 20/10}. For the Roos and NACP chamber, the results were positive suggesting that the chambers need to be shifted towards the focus. For the Markus chamber, the required shift was negative and for the Advanced Markus chamber partly negative and partly positive. The total perturbation correction p was almost independent of the depth. Only for regions below 1 cm the perturbation correction deviated significantly from unity. Conclusion: In the present study, the effective point of measurement and the total perturbation correction p was determined for four parallel-plate ionization chambers and five clinical relevant photon spectra. Applying the calculated EPOM, the residual perturbation correction p was mostly depth independent.

60 APPLIED LIFE SCIENCES↗

Shape design sensitivity analysis and optimization of three dimensional elastic solids using geometric modeling and automatic regridding

An automatic regridding method and a three dimensional shape design parameterization technique were constructed and integrated into a unified theory of shape design sensitivity analysis. An algorithm was developed for general shape design sensitivity analysis of three dimensional eleastic solids. Numerical implementation of this shape design sensitivity analysis method was carried out using the finite element code ANSYS. The unified theory of shape design sensitivity analysis uses the material derivative of continuum mechanics with a design velocity field that represents shape change effects over the structural design. Automatic regridding methods were developed by generating a domain velocity field with boundary displacement method. Shape design parameterization for three dimensional surface design problems was illustrated using a Bezier surface with boundary perturbations that depend linearly on the perturbation of design parameters. A linearization method of optimization, LINRM, was used to obtain optimum shapes. Three examples from different engineering disciplines were investigated to demonstrate the accuracy and versatility of this shape design sensitivity analysis method.

Yao, Tse-Min↗

Density functional based methods for light harvesting molecules

The goal of the proposal was to computationally study the photoinduced charge transfer excited states of organic molecules. The systems of interest are the large organic supramolecules that have potential for photovoltaic applications. The simulation of the charge transfer excited states in large supramolecular assemblies require quantum mechanical methods that can be applied to systems with hundreds of atoms. Through this project we have implemented a perturbative delta-self-consistent field method that can easily describe the charge transfer excited states with regular density functionals without range separation. The cost of the calculations of an excited state is similar to that of the ground state. The method also allows for calculation of the energy gradients of the excited state. The developed method was applied to study a number of different supramolecular systems containing hundreds of atoms with excellent agreement with experiment. The absorption characteristics and the influence of density functional approximations were also examined. These led to several studies on the variety of organic electron donor and acceptor molecules. Apart from these developments through this project we also improved the code capabilities by implementing new meta-GGA functionals. This was a major step since the code is purely density functional and earlier the functional capabilities were limited only to generalized gradient approximations. A total of 23 peer-reviewed publications in top chemical physics journals resulted from this grant.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rotor Dynamic State and Parameter Identification from Hovering Transients

State and parameter identifications based on a form of the maximum likelihood method are applied to the problem of extracting linear perturbation models, including rotor dynamic inflow effects, from transient blade flapping measurements. The estimation method is first studied in computer simulations and then applied to cyclic pitch stirring transients generated with a four-bladed rotor model operating in hovering trim conditions. The analytical perturbation models extracted from the transient test results are compared with transient and frequency response tests not used in the state and parameter identification. The identified analytical perturbation model is also compared with a simple theory. The method that is applicable both to small scale and full scale dynamic rotor testing is being extended to perturbations from forward flight trim conditions.

Hohenemser, K. H.↗

Robust unfolding of MeV x-ray spectra from filter stack spectrometer data

Here, we present an inversion method capable of robustly unfolding MeV x-ray spectra from filter stack spectrometer (FSS) data without requiring an a priori specification of a spectral shape or arbitrary termination of the algorithm. Our inversion method is based upon the perturbative minimization (PM) algorithm, which has previously been shown to be capable of unfolding x-ray transmission data, albeit for a limited regime in which the x-ray mass attenuation coefficient of the filter material increases monotonically with x-ray energy. Our inversion method improves upon the PM algorithm through regular smoothing of the candidate spectrum and by adding stochasticity to the search. With these additions, the inversion method does not require a physics model for an initial guess, fitting, or user-selected termination of the search. Instead, the only assumption made by the inversion method is that the x-ray spectrum should be near a smooth curve. Testing with synthetic data shows that the inversion method can successfully recover the primary large-scale features of MeV x-ray spectra, including the number of x-rays in energy bins of several-MeV widths to within 10%. Fine-scale features, however, are more difficult to recover accurately. Examples of unfolding experimental FSS data obtained at the Texas Petawatt Laser Facility and the OMEGA EP laser facility are also presented.

47 OTHER INSTRUMENTATION↗