SEARCH · Search NASA

Results for “Pyrolysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

All sources NASA NTRS DOE OSTI

DOE OSTI2017

Compatibility Assessment of Fuel System Infrastructure Plastics with Bio-oil and Diesel Fuel

We report that bio-oil derived via fast pyrolysis is being developed as a renewable fuel option for petroleum distillates. The compatibility of neat bio-oil with 18 plastic types was evaluated using neat diesel fuel as the baseline. The plastic materials included polyphenylene sulfide (PPS), polyethylene terephthalate (PET), polytetrafluoroethylene (PTFE), polyvinylidene fluoride (PVDF), polyoxymethylene (POM), POM copolymer, high density polyethylene (HDPE), polybutylene terephthalate (PBT), polypropylene (PP), polyethylene terephthalate glycol (PETG), polythiourea (PTU), four nylon grades, and four thermosetting resins. Specimens of each material were immersed in the test fuels for a period of 16 weeks to achieve full saturation. Except for PP and HDPE, the plastic materials underwent higher volume expansion in bio-oil than in the baseline diesel (which was negligible in most cases). This volume increase corresponds to the higher polarity of the bio-oil. PPS, PET, and PTFE were unaffected by bio-oil exposure, but modest swelling (between 2 and 5%) occurred for the two acetals (POM and POM copolymer), Nylon-12, PBT, PETG, and the four resin grades. More moderate swelling (8–15%) was noted for Nylon-6, Nylon-6/6, and Nylon-11, and excessive swell (>40%) occurred for PTU. The nonpolar nature of PP and HDPE matches that of diesel, leading to higher solubility (swell) in this fuel type. Finally, the relatively low volume expansion following exposure indicates that many of the existing infrastructure plastics (excluding PTU) should be suitable for use with bio-oil.

09 BIOMASS FUELS↗

DOE OSTI2019

Correlations of the Elemental Compositions of Primary Coal Tar and Char

We report that simulations of large-scale coal combustors rely on accurate submodels to describe the chemical and physical changes in coal during reaction. Typically, researchers use simplified empirical submodels tuned to experimental data to reduce the computational complexity. When data are not readily available, researchers use simplifying assumptions, which can create inaccuracies and biases in a large simulation. One such simplifying assumption in coal research is how to describe the elemental composition of primary pyrolysis products. This paper explores several different empirical model forms to predict the dry, ash-free fractions of C, H, O, N, and S in both the char and the tar, using variables such as parent coal composition, reaction conditions (temperatures and particle residence times), and key coal structural parameters derived from NMR measurements. These model forms were correlated to existing data using a wide range of experimental data using a cross-validation procedure. Since coal structural values can be expensive to measure, several correlations from the literature were used to estimate these values based on information from the proximate and ultimate analyses of the parent coal, including a new correlation for the coal aromaticity. These model forms were tested against a set of measured elemental compositions of tar and char to find the best fit to use in the cross-validation process. Lastly, the best empirical models are presented that predict elemental composition of the coal char and tar after devolatilization.

01 COAL, LIGNITE, AND PEAT↗

DOE OSTI2017

Group Additivity Determination for Oxygenates, Oxonium Ions, and Oxygen-Containing Carbenium Ions

Bio-oil produced from biomass fast pyrolysis often requires catalytic upgrading to remove oxygen and acidic species over zeolite catalysts. The elementary reactions in the mechanism for this process involve carbenium and oxonium ions. In order to develop a detailed kinetic model for the catalytic upgrading of biomass, rate constants are required for these elementary reactions. The parameters in the Arrhenius equation can be related to thermodynamic properties through structure-reactivity relationships, such as the Evans-Polanyi relationship. For this relationship, enthalpies of formation of each species are required, which can be reasonably estimated using group additivity. However, the literature previously lacked group additivity values for oxygenates, oxonium ions, and oxygen-containing carbenium ions. In this work, 71 group additivity values for these types of groups were regressed, 65 of which had not been reported previously and six of which were newly estimated based on regression in the context of the 65 new groups. Heats of formation based on atomization enthalpy calculations for a set of reference molecules and isodesmic reactions for a small set of larger species for which experimental data was available were used to demonstrate the accuracy of the Gaussian-4 quantum mechanical method in estimating enthalpies of formation for species involving the moieties of interest. Isodesmic reactions for a total of 195 species were constructed from the reference molecules to calculate enthalpies of formation that were used to regress the group additivity values. The results showed an average deviation of 1.95 kcal/mol between the values calculated from Gaussian-4 and isodesmic reactions versus those calculated from the group additivity values that were newly regressed. Importantly, the new groups enhance the database for group additivity values, especially those involving oxonium ions.

09 BIOMASS FUELS↗

DOE OSTI2021

Absolute Photoionization Cross Section of the Simplest Enol, Vinyl Alcohol

The absolute photoionization cross section of vinyl alcohol was determined by multiplexed photoionization mass spectrometry of the Norrish type II photodissociation of butanal at 308 nm. The measured cross sections at 10.005 and 10.205 eV are 7.5 ± 1.9 MB and 8.1 ± 1.9 MB respectively. Here, a higher signal-to-noise ratio photoionization spectrum of vinyl alcohol was recorded via the pyrolysis of 2-chloroethanol and scaled to the absolute cross sections measured using the Norrish type II method. From comparison of our spectrum with previously reported photoelectron spectra we conclude that vinyl alcohol is mainly ionized by direct ionization in the energy range 9 – 9.6 eV, whereas autoionization is responsible for the steady rise in the photoionization spectrum above the end of the Franck-Condon envelope at 9.9 eV.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

A Conical Intersection Influences the Ground State Rearrangement of Fulvene to Benzene

The rearrangement of fulvene to benzene is believed to play an important role in the formation of soot during hydrocarbon combustion. Previous work has identified two possible mechanisms for the rearrangement-a unimolecular path and a hydrogen-atom-assisted, bimolecular path. Computational results to date have suggested that the unimolecular mechanism faces a barrier of about 74 kcal/mol, which makes it unable to compete with the bimolecular mechanism under typical combustion conditions. This computed barrier is about 10 kcal/mol higher than the experimental value, which is an unusually large discrepancy for modern electronic structure theory. In the present work, we have reinvestigated the unimolecular mechanism computationally, and we have found a second transition state that is approximately 10 kcal/mol lower in energy than the previously identified one and, therefore, in excellent agreement with the experimental value. The existence of two transition states for the same rearrangement arises because there is a conical intersection between the two lowest singlet states which occurs in the vicinity of the reaction coordinates. The two possible paths around the cone on the lower adiabatic surface give rise to the two distinct saddle points. The lower barrier for the unimolecular mechanism now makes it competitive with the bimolecular one, according to our calculations. In support of this conclusion, we have reanalyzed some previous experimental results on anisole pyrolysis, which leads to benzene as a significant product and have shown that the unimolecular and bimolecular mechanisms for fulvene ? benzene must be occurring competitively in that system. Finally, we have identified that similar conical intersections arise during the isomerizations of benzofulvene and isobenzofulvene to naphthalene.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2019

Erratum to “A Combined Experimental and Theoretical Study on the Activity and Selectivity of the Electrocatalytic Hydrogenation of Aldehydes”

A detailed mechanistic study of the electrochemical hydrogenation of aldehydes is presented toward the goal of identifying how organic molecules in solution behave at the interface with charged surfaces and what is the best manner to convert them. Specifically, this study focuses on designing an electrocatalytic route for ambient temperature post-pyrolysis treatment of bio-oil. Aldehyde reductions are needed to convert biomass into fuels or chemicals. A combined experimental and computational approach is taken toward catalyst design to provide testable hypotheses regarding catalyst composition, activity, and selectivity. Electrochemical hydrogenation mechanisms for benzaldehyde and pentanal reduction are found to proceed by a coupled proton-electron transfer process. Initial results show that Au, Ag, Cu, and C catalysts exhibit the highest conversion to alcohol products. These catalysts are suitable because they show high cathodic onset potentials for H2 formation and low cathodic onset potentials for organic reduction. Conversion of aromatic aldehydes is found to be appreciably higher than aliphatic ones. Classical molecular dynamics simulations of solvent and substrate mixtures in an electrolytic cell were performed to assess how species concentrations vary at the solid/liquid interface and in the bulk as a function of applied voltage. Results show that an increase in voltage in the electrolytic cell decreases organic and increases water mole fractions at the solid/liquid interface. In this current study, charged cathodic surfaces result in carbonyl orientations at the surface that do not favor electron transfer. Repulsion of organic substrates to the bulk must be compensated by strong adhesion to the electrode surface. Implications on catalyst choice and process design are discussed.

Pyrolysis Oil upgrading, Atomistic Simulations, El↗

DOE OSTI2020

Sequential Ammonia and Carbon Dioxide Adsorption on Pyrolyzed Biomass to Recover Waste Stream Nutrients

Untreated fecal waste in unsewered communities and reactive nitrogen (N) loading from wastewater and urine disposal are important environmental challenges. Through pyrolysis, untreated fecal waste can be converted into amine-rich carbon dioxide (CO 2 ) sorbents, the chemisorption of which tunes the surface chemistry toward ammonia (NH 3 ) uptake. We compared the N-loading potential within amine-rich pyrolyzed human solid waste through exposure to CO 2 followed by NH 3 with the N-loading potential on carboxyl-rich, pyrolyzed oxidized wood using sequential adsorption of isotopically labeled CO 2 and NH 3 . The total N content of pyrolyzed oxidized wood exposed once to NH3 was similar to native, pyrolyzed human solid waste (3.7% compared to 4.6%). However, sorption kinetics and spectroscopic evidence revealed distinct N forms between the two materials affecting subsequent CO 2 and NH 3 uptake. Tertiary amines comprised 70% of N in pyrolyzed waste, compared to only 53% in pyrolyzed oxidized wood. The high heat of adsorption of CO 2 on pyrolyzed human solid waste (50 kJ mol-1) at low concentrations (0.05 mmol CO 2 g -1 ) was indicative of CO 2 reactivity with tertiary amines, consistent with the formation of carbamic acid (Figure S1). Conversely, after exposure to NH 3 , pyrolyzed oxidized wood chemisorbed CO 2 at much higher concentrations (0.7 mmol CO 2 g-1), pointing to primary amines as the active functional moieties. Adsorption kinetics of pyrolyzed oxidized wood revealed continued, albeit diminishing NH 3 uptake with each consecutive CO 2 treatment, averaging 5.9 mmol NH 3 g -1 for the first NH 3 exposure event, and still 3.5 and 2.9 mmol NH 3 g -1 for the second and third. Penetration of 15 NH 3 and 13 CO 2 measured by NanoSIMS reached over 7 µm deep into both materials, explaining the large NH 3 capture. The significantly lower NH 3 adsorption compared to pyrolyzed oxidized wood may be a result of potassium (K) carbonate precipitation precluding a Lewis base interaction between NH 3 and chemisorbed CO 2 , suggested by a 2-fold increase in surface K concentrations after exposure of pyrolyzed human solid waste to CO 2 +NH 3 detected by XPS.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Aldol condensation of mixed oxygenates on TiO 2

Kinetic studies of aldol condensation of mixtures on TiO 2 reveal strong suppression of acetone self-condensation in the presence of acetaldehyde.

Oliphant, Brandon Elliott↗

DOE OSTI2022

Helium droplet infrared spectroscopy of the butyl radicals

Butyl radicals (n-, s-, i-, and tert-butyl) are formed from the pyrolysis of stable precursors (1-pentyl nitrite, 2-methyl-1-butyl nitrite, isopentyl nitrite, and azo-tert-butane, respectively). The radicals are doped into a beam of liquid helium droplets and probed with infrared action spectroscopy from 2700 to 3125 cm -1 , allowing for a low temperature measurement of the CH stretching region. The presence of anharmonic resonance polyads in the 2800–3000 cm -1 region complicates its interpretation. To facilitate spectral assignment, the anharmonic resonances are modeled with two model Hamiltonian approaches that explicitly couple CH stretch fundamentals to HCH bend overtones and combinations: a VPT2+K normal mode model based on coupled-cluster with single, double, and perturbative triple excitations [CCSD(T)] quartic force fields and a semi-empirical local mode model. Both of these computational methods provide generally good agreement with the experimental spectra.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Atomistic insight into the effects of electrostatic fields on hydrocarbon reaction kinetics

Reactive Molecular Dynamics (MD) and Density Functional Theory (DFT) computations are performed to provide insight into the effects of external electrostatic fields on hydrocarbon reaction kinetics. By comparing the results from MD and DFT, the suitability of the MD method in modeling electrodynamics is first assessed. Results show that the electric field-induced polarization predicted by the MD charge equilibration method is in good agreement with various DFT charge partitioning schemes. Then, the effects of oriented external electric fields on the transition pathways of non-redox reactions are investigated. Results on the minimum energy path suggest that electric fields can cause catalysis or inhibition of oxidation reactions, whereas pyrolysis reactions are not affected due to the weaker electronegativity of the hydrogen and carbon atoms. MD simulations of isolated reactions show that the reaction kinetics is also affected by applied external Lorentz forces and interatomic Coulomb forces since they can increase or decrease the energy of collision depending on the molecular conformation. In addition, electric fields can affect the kinetics of polar species and force them to align in the direction of field lines. These effects are attributed to energy transfer via intermolecular collisions and stabilization under the external Lorentz force. The kinetics of apolar species is not significantly affected mainly due to the weak induced dipole moment even under strong electric fields. The dynamics and reaction rates of species are studied by means of large-scale combustion simulations of n-dodecane and oxygen mixtures. Results show that under strong electric fields, the fuel, oxidizer, and most product molecules experience translational and rotational acceleration mainly due to close charge transfer along with a reduction in their vibrational energy due to stabilization. This study will serve as a basis to improve the current methods used in MD and to develop novel methodologies for the modeling of macroscale reacting flows under external electrostatic fields.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Silicon carbide fiber composite receiver tubes manufactured by PIP process

The performance of SiC fiber composites made by a polymer infiltration and pyrolysis (PIP) process was investigated. Two types of tubular composites were manufactured using Hi-Nicalon and Nicalon-CG silicon carbide fibers infiltrated with SMP10 silicon carbide matrix. The fiber content in both composites was about 25 vol.% with an average density of 2.39 g/cc. The tubular SiC composites showed stable solar absorptance and emittance of 0.97 and 0.91, respectively, at 800 °C. The composites were thermally shocked at 900, 1000, and 1100 °C with a waterjet simulating raindrops. As a result, the hoop tensile strength of the composites revealed no loss of mechanical strength due to the thermal shock experiments up to 1100 °C.

14 SOLAR ENERGY↗

DOE OSTI2021

Advanced spectrometric methods for characterizing bio-oils to enable refineries to reduce fuel carbon intensity during co-processing

A promising approach for supplementing petroleum-derived fuels to support reductions in green-house gas emissions is to convert abundant biomass feedstocks into renewable carbon-rich oils using pyrolysis. However, the resultant bio-oils contain various oxygenated compounds that can impart acidity, chemical and thermal instability, and immiscibility with petroleum derived fuels, necessitating further upgrading to derive fuel blendstocks. Co-processing bio-oils and petroleum-derived liquids in existing refineries is a potentially near-term, cost-effective approach for upgrading bio-oils while reducing refinery carbon intensities. However, one cause for hesitation in co-processing bio-oils is limited comprehensive characterization and speciation of the bio-oil components. Advanced analytical techniques are currently under investigation to enable identification of elusive species in bio-oils, enabling researchers to develop strategies to mitigate catalyst deactivation agents and contaminants. This review provides a brief overview of several analytical methods commonly used to analyze bio-oils and their limitations. In addition, advanced techniques currently under development are discussed to further elucidate bio-oil components that may limit its end use. This will help inform the technical and economic feasibility of co-processing bio-oils with petroleum-derived liquids, therefore, improving the overall downstream processes for biofuels blendstock production.

09 BIOMASS FUELS↗

DOE OSTI2023

Size effects in 3D–printed polymer–derived, zirconium diboride–reinforced ceramic composites

Preceramic polymers are of interest for use in many manufacturing techniques such as injection molding, ceramic fiber infiltration, and additive manufacturing. However, off-gassing of low molecular weight oligomers occurs when these polymers cure, potentially leading to porosity in the cured part. Here to study how porosity and strength are affected by the size of the printed part, and the presence of a high surface area nano-scale filler, polycarbosilane (PCS) microrods of varying diameter were fabricated via direct ink writing (DIW), an additive manufacturing technique, with two ink formulations containing either zirconium diboride (ZrB 2 ) alone, or ZrB 2 and fumed alumina (FA). Sets of microrods were printed in a range of sizes by using print nozzles of 450, 634, 979, 1 346, or 1 702 μm in diameter, which were thermally cured, pyrolyzed to form ceramic composite microrods, and tested in 3-pt flexure. Porosity increased with increasing diameter, while failure strength decreased. For a given nozzle size, the microrods containing FA displayed lower porosity and higher strength (up to ~500 MPa) compared to the microrods containing only ZrB 2 . Weibull strength analysis was performed on each group of microrods and shows that the addition of FA increased Weibull modulus from 4.63 ± 1.56 to 9.35 ± 0.601. In conjunction with optical microscopy, this analysis indicates two distinct flaw populations in the printed materials, porosity which arises during the curing step and cracking which arises during pyrolysis of the larger specimens.

36 MATERIALS SCIENCE↗

DOE OSTI2017

Crystal structure and phase transitions of Sr{sub 2}Ni{sub 1–y}Mg{sub y}MoO{sub 6} solid solutions

Sr{sub 2}Ni{sub 1–y}Mg{sub y}MoO{sub 6} mixed oxides with a double perovskite structure have been synthesized via the pyrolysis of glycerol–salt mixtures. The phase composition and structure of the samples have been determined using X-ray diffraction and Raman spectroscopy. The temperatures of phase transitions in Sr{sub 2}Ni{sub 1–y}Mg{sub y}MoO{sub 6} with y = 0.25, 0.5, and 0.75 have been determined by high-temperature X-ray diffraction and dilatometry.