Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structural Effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Proof of Equivalent Catalytic Functionality upon Photon-Induced and Thermal Activation of Supported Isolated Vanadia Species in Methanol Oxidation

Here, evidence is provided that isolated surface vanadia (VO4) species on SiO 2 can similarly act as a thermal heterogeneous catalyst and as a heterogeneous photocatalyst. Structurally identical surface VO 4 species catalyze the selective oxidation of methanol both by thermal activation and by UV-light induction. Selectivity to formaldehyde appears to be unity. For the photocatalytic reaction at room temperature, formaldehyde desorption is rate limiting. With larger agglomerates or V 2 O 5 nanoparticles, on the contrary, only the thermal reaction is feasible. This is tentatively attributed to the different positions of electronic states (HOMO/LUMO, valence/conduction band) on the electrochemical energy scale owing to the quantum size effect. Besides offering new fundamental insight into the mode of action of nanosized photocatalysts, our results demonstrate that tuning the photocatalytic reactivity of supported transition-metal oxides by adjusting the degree of agglomeration is feasible.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Importance of Window Installation in Residential Building Envelopes Having Continuous External Insulation in Order to Realize Energy Efficiency

Residential buildings are one of the prime candidates in the United States for reducing energy consumption. Continuous exterior insulation (CEI) is being used increasingly often in residential buildings to improve energy efficiency. Windows constitute 15–40% of a building envelope and are the weakest component in energy performance. The installation of windows in walls with CEI has not been well evaluated. We identified four cases of installing windows in walls with CEI of 25–76 mm (1–3 in.) thickness and analyzed the energy loss between the window and wall interface (flanking loss), structural issues, air leakage, and moisture penetration. Thermal analysis showed that the insulation value (RSI) of the 305 mm (12 in.) perimeter wall surrounding a window decreased by 7.6–34.5% in the four cases when compared with the RSI of the wall without the window. A window installation method is proposed to address the issues likely to occur with installation methods currently being used in the field. An out-of-the-box installation system was also designed to achieve a better thermal performance, cost effectiveness, and structural performance in high-performance residential buildings.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2020

Structural Instability in Electrically Stressed, Oxygen Deficient BaTiO 3 Nanocrystals

The dynamics of oxygen vacancies under external stimuli dominates the performance of many solid-state devices, including capacitors, oxide memristors, anionic conductors, etc. By means of in-situ Transmission Electron Microscopy, we found in BaTiO 3 perovskite nanocrystals that formation of oxygen vacancies due to electrical stressing renders the oxide amorphizable under electron beam illumination, suggesting the presence of a threshold concentration of oxygen vacancy affecting the structural stability of BaTiO 3 crystals upon high energy radiation. In contrast to the structural change, the resistivity of the nanocrystal seems not liable to the amorphization prior to dielectric breakdown at higher voltage bias. Here, we propose that an increase in oxygen vacancy content promotes oxygen mobility in the perovskite structure allowing electron beam induced electric field to modify the local structural and composition. Our in-situ observations reveal the central role of oxygen vacancies in the structural stability of perovskites which is of paramount importance to their applications in extreme environments and suggest a potential new route to micro-processing perovskite oxides using the electron beam via oxygen vacancy management without severely compromising the electric property.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Antimony nanobelt asymmetric membranes for sodium ion battery

In this study, composite asymmetric membranes containing antimony (Sb) nanobelts are prepared via a straightforward phase inversion method in combination with post-pyrolysis treatment. Sb nanobelt asymmetric membranes demonstrate improved cyclability and specific capacity as the alloy anode of sodium ion battery compared to Sb nanobelt thin films without asymmetric porous structure. The unique structure can effectively accommodate the large volume expansion of Sb-based alloy anodes, prohibit the loss of fractured active materials, and aid in the formation of stable artificial solid electrolyte interphases as evidenced by an outstanding capacity retention of ~98% in 130 cycles at 60 mA g -1 . A specific capacity of ~600 mAh g -1 is obtained at 15 mA g -1 (1/40C). When the current density is increased to 240 mA g -1 , ~80% capacity can be maintained (~480 mAh g -1 ). The relations among phase inversion conditions, structures, compositions, and resultant electrochemical properties are revealed through comprehensive characterization.

25 ENERGY STORAGE↗
DOE OSTI2018

Evaluation of Zircaloy-4 Welding and Hydrogen Charging Effects for Use as the Structural Material for the Target Solution Vessel and Support Lines of SHINE

The subcritical hybrid intense neutron emitter (SHINE) is a proposed 99 Mo production facility to be constructed in the United States. It uses a deuterium (D) and tritium (T) fusion source to cause subcritical fission in an aqueous uranium solution, which is cycled to collect the 99 Mo products. The target solution vessel (TSV) is the container of the aqueous uranium solution, so it must remain structurally sound during operational exposure to water, fission products, neutrons, and hydrogen isotopes. The TSV will be large enough to require welding, so the exposure of joints to these same conditions must also be considered. The candidate material being investigated is Zircaloy-4. While Zircaloy-4 has a long history in the nuclear industry, it has primarily been used as fuel cladding at service temperatures of ~300°C. Zircaloy-4 must be evaluated for behavior under neutron irradiation at SHINE-relevant temperatures of <100°C. In this project, the effects of hydrogen, welding, and neutron irradiation at low temperatures are investigated.

36 MATERIALS SCIENCE↗
NASA NTRS2009

Dynamic Probabilistic Instability of Composite Structures

A computationally effective method is described to evaluate the non-deterministic dynamic instability (probabilistic dynamic buckling) of thin composite shells. The method is a judicious combination of available computer codes for finite element, composite mechanics and probabilistic structural analysis. The solution method is incrementally updated Lagrangian. It is illustrated by applying it to thin composite cylindrical shell subjected to dynamic loads. Both deterministic and probabilistic buckling loads are evaluated to demonstrate the effectiveness of the method. A universal plot is obtained for the specific shell that can be used to approximate buckling loads for different load rates and different probability levels. Results from this plot show that the faster the rate, the higher the buckling load and the shorter the time. The lower the probability, the lower is the buckling load for a specific time. Probabilistic sensitivity results show that the ply thickness, the fiber volume ratio and the fiber longitudinal modulus, dynamic load and loading rate are the dominant uncertainties in that order.

Chamis, Christos C.↗
DOE OSTI2017

Flow and Turbulence Control in a Boundary Layer Wind Tunnel Using Passive Hardware Devices

The Climatic Wind Tunnel (CWT) is a new experimental facility of the Institute of Theoretical and Applied Mechanics (ITAM) in Prague, Czech Republic. It is uniquely able to replicate precipitation and freezing effects on structural models in the climatic test section, and simultaneously perform aerodynamic and aeroelastic tests on structural models in the aerodynamic test section. Extensive measurements are carried out to investigate airflow and turbulence characteristics in the empty aerodynamic test section. Capability to experimentally simulate the atmospheric boundary layer (ABL) is studied using castellated barrier wall, Counihan vortex generators, and surface roughness elements. An individual influence of each of these passive hardware devices is separately tested as well, as they are commonly used combined, and their individual contributions to the ABL model characteristics are not well known. The analysis is based on hot-wire anemometer measurements carried out at various cross sections in the aerodynamic test section of the CWT. Experimental results are reported as mean velocity and turbulence intensity fields for the empty aerodynamic test section without passive hardware devices. Vertical profiles of mean velocity, turbulence intensity, and turbulence length scales, as well as power spectral density of velocity fluctuations, are reported for the ABL small-scale model. The barrier is observed to cause a decrease in flow velocity and an increase in turbulence close to surface. Vortex generators enhance turbulence throughout the entire height range under scope. Increased turbulence and decreased flow velocity are particularly exhibited close to surface due to surface roughness. Influence of each of the studied passive hardware devices on flow and turbulence is quantified in a dimensionless form to allow for separately accounting for their effects.

42 ENGINEERING↗
DOE OSTI2020

In Situ Oxygen Isotope Determination in Serpentine Minerals by SIMS: Addressing Matrix Effects and Providing New Insights on Serpentinisation at Hole BA1B (Samail ophiolite, Oman)

The ability to constrain the petrogenesis of multiple serpentine generations recorded at the microscale is crucial for estimating the extent and conditions of modern versus fossil serpentinisation in ophiolites. To address matrix bias effects during oxygen isotope analysis by SIMS, we present the first investigation analysing antigorite in the compositional range Mg# = 77.5–99.5 mole %, using a CAMECA IMS–1280 secondary ion mass spectrometer. Spot–to–spot homogeneity is ≤ 0.5‰ (2s) for the new antigorite reference materials. The relative bias between antigorite reference materials with different Mg/Fe ratios is described by a second order polynomial, and a maximum difference in bias of ~ 1.8‰ was measured for Mg# ~ 78 to 100. We observed a bias up to ~ 1.0‰ between lizardite and antigorite attributed to their different crystal structure. Orientation effects up to ~ 1‰ were observed in chrysotile. The new analytical protocol allowed the identification of oxygen isotope zoning up to ~ 7‰ in serpentine minerals from two serpentinites recovered from an area of active serpentinisation in the Samail ophiolite. Furthermore in situ analysis is capable of resolving isotopic heterogeneity that may directly reflect changes in the physical and chemical conditions of multiple serpentinisation events in the Samail ophiolite.

47 OTHER INSTRUMENTATION↗
DOE OSTI2018

The Doping Effect on Ferromagnetic Arrangement and Electronic Structure of Cubic AlAs with Low Concentration of 3d (V, Cr, and Mn) Impurities

The doping effect of aluminum arsenide (AlAs) with 3d (TM = V, Cr, and Mn) of transition metal impurities gives new materials called diluted magnetic semiconductors, which have interesting electronic and magnetic properties for spintronics applications. We have used the full-potential linearized augmented plane wave (FP-LAPW) method to calculate the electronic band structures and magnetic properties of Al{sub 1−x}TM{sub x}As at low concentration x = 0.0625 of transition metal (TM = V, Cr, and Mn) atoms. We have found that the majority-spin states of Al{sub 0.9375}TM{sub 0.0625}As compounds are metallic due to large p-d hybridization between 3d levels of TM and the 4p levels of As around Fermi level, whereas the minority-spin states have semiconductor character. These compounds exhibit a half-metallic behavior with spin polarization of 100%, where the ferromagnetism is originated from double-exchange mechanism. Therefore, Al{sub 0.9375}TM{sub 0.0625}As (TM = V, Cr, and Mn) materials seem to be good candidates for spin injection in the field of spintronics applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Effect of Mg Content in Melt-Spun Mn–Bi–Mg–Sb–In Alloys on the Structure and Properties of Field-Annealed Magnets

Mn-Bi alloys modified with Mg and other elements were recently developed into promising rare-earth-free permanent magnets through successive melt-spinning, warm compaction, and short magnetic-field annealing. This letter reports herein on the crystal structures, texture, and magnetic properties observed in Mn 50 Bi 49-x Mg x Sb 0.5 In 0.5 alloys (x = 0, 1.5, 3.0, 4.5) throughout these processing steps. The Mg substitution favors MnBi-based intermetallic phases over the Bi- and Mn-based solid solutions and the stable α intermetallic phase over the metastable β' intermetallic phase. Magnesium increases the c/a ratio of the α phase lattice parameters for all studied x values and it increases the degree of the field-annealing-induced texture for x ≤ 3. The effect of Mg on coercivity is explained as combination of a positive one via the α phase magnetocrystalline anisotropy and a negative one via the development of texture. The effect of the substitution on the maximum energy product additionally involves the decreasing density of the alloys; the optimum x is found to be ≈3. Additionally reported are the thermal properties of selected alloys. The mechanism of field-annealing effect on the coercivity is briefly discussed.

36 MATERIALS SCIENCE↗
NASA NTRS1999

Passively Damped Laminated Piezoelectric Shell Structures with Integrated Electric Networks

Multi-field mechanics are presented for curvilinear piezoelectric laminates interfaced with distributed passive electric components. The equations of motion for laminated piezoelectric shell structures with embedded passive electric networks are directly formulated and solved using a finite element methodology. The modal damping and frequencies of the piezoelectric shell are calculated from the poles of the system. Experimental and numerical results are presented for the modal damping and frequency of composite beams with a resistively shunted piezoceramic patch. The modal damping and frequency of plates, cylindrical shells and cylindrical composite blades with piezoelectric-resistor layers are predicted. Both analytical and experimental studies illustrate a unique dependence of modal damping and frequencies on the shunting resistance and show the effect of structural shape and curvature on piezoelectric damping.

Saravanos, Dimitris A.↗
DOE OSTI2022

Differentiation of static and dynamic interfacial area in the structured packed column

Effective mass-transfer area plays a key role for post-combustion carbon capture. The static area, an inactive part relative to mass transfer, needs to be differentiated in the interfacial area. In the present study, CFD method is employed to investigate static and dynamic interfacial areas in Mellapak 500.Y structured packing. Here, a wide range of physical properties and loading conditions are included to understand their effects on both areas. The result shows that the relationship between interfacial area and interfacial velocity at the local scale can be described by gamma distribution with good accuracy. The influences of various physical properties derived from simulation are compared with existing experiment-based correlations for both static and interfacial areas. The result shows the dominant influence of viscosity on the static area, and the most importance of the influence of contact angle on the interfacial area. This study also highlights the importance of viscosity, which is usually ignored.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

New quaternary alkali metal cadmium selenites, A{sub 2}Cd(SeO{sub 3}){sub 2} (A = K, Rb, and Cs) and Li{sub 2}Cd{sub 3}(SeO{sub 3}){sub 4}

A series of new alkali metal cadmium selenites, A{sub 2}Cd(SeO{sub 3}){sub 2} (A = K, Rb, and Cs) and Li{sub 2}Cd{sub 3}(SeO{sub 3}){sub 4} have been synthesized in phase pure forms through hydrothermal and solid-state reactions. Structural analyses using single crystal X-ray diffraction indicate that while A{sub 2}Cd(SeO{sub 3}){sub 2} and Li{sub 2}Cd{sub 3}(SeO{sub 3}){sub 4} reveal layered structures consisting of CdO{sub 6} and SeO{sub 3} polyhedra, their symmetry, bonding modes, and the orientation of lone pairs on Se{sup 4+} cations are different. A closer examination suggests that the observed structural variations found in the reported materials are attributed to the structure-directing effect of alkali metal cations with different sizes. Scanning electron microscopy/energy dispersive analysis by X-ray, thermogravimetric analysis, Infrared and UV–vis diffuse reflectance spectroscopy, transformation reactions under hydrothermal conditions, and local dipole moment calculations for the reported materials are also reported. - Graphical abstract: The size of alkali metal cations affects the direction of lone pairs on the Se{sup 4+} between the layers. Display Omitted - Highlights: • New selenites, A{sub 2}Cd(SeO{sub 3}){sub 2} (A = K, Rb, and Cs) and Li{sub 2}Cd{sub 3}(SeO{sub 3}){sub 4}, were synthesized. • Complete structural determinations and full characterizations have been performed. • The structural variations are due to the different size of alkali metal cations. • A{sub 2}Cd(SeO{sub 3}){sub 2} transformed to Li{sub 2}Cd{sub 3}(SeO{sub 3}){sub 4} in aqueous LiNO{sub 3} under hydrothermal conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Investigating the effect of screen-printed structured graphite electrodes with low tortuosity for high-capacity and fast-charging lithium-ion batteries

A flexible screen-printed graphite electrode was fabricated as an anode for developing fast-charging lithium-ion batteries with low tortuosity. A homogenous anode ink was prepared by mixing graphite as the active material, carbon black (C45) as the conductive additive, and polyvinylidene fluoride (PVDF) as the binder in N-Methyl-2-pyrrolidone (NMP) solvent. The ink was deposited on a flexible copper foil via a stainless-steel screen consisting of an array of pores, that act as secondary pore networks (SPNs), using the screen-printing process. Lithium-ion battery half-cells were assembled using the printed graphite anode, lithium metal foil as the counter electrode, and 1.2 M lithium hexafluorophosphate (LiPF 6 ) in ethyl carbonate: ethyl methyl carbonate (EC: EMC = 3:7) as the electrolyte. The effect of SPNs on the cell performance was investigated by performing formation, rate and cycling tests on the assembled cells, at different C-rates. It was observed that the cells consisting of SPNs with a pore size of 100 μm and edge-to-edge distance of 100 μm between the pores exhibited significantly higher specific capacities of 168 and 129 mAh/g when compared to reference cells without SPNs, which had capacities of 120 and 85 mAh/g, at high C-rates of 4 C and 6 C, respectively. The cells with SPNs also demonstrated excellent cycling performance with ~ 95% capacity retention after 100 cycles at 2 C.

Fast charging lithium-ion battery↗
NASA NTRS2004

Modifying Ship Air-Wake Vortices for Aircraft Operations

Columnar-vortex generators (CVG) have been proposed as means to increase the safety of takeoffs and landings of aircraft on aircraft or helicopter carriers and other ships at sea. According to the proposal, CVGs would be installed at critical edge locations on ships to modify the vortices in the air wakes of the ships. The desired effects of modifications are to smooth airflows over takeoff and landing deck areas and divert vortices from takeoff and landing flight paths. With respect to aircraft operations, the wake flows of primary interest are those associated with the bow and side edges of aircraft-carrier decks and with superstructures of ships in general (see Figure 1). The bow and deck-edge vortices can adversely affect airplane and helicopter operations on carriers, while the superstructure wakes can primarily affect operations of helicopters. The concept of the CVG is not new; what is new is the proposed addition of CVGs to ship structures to effect favorable modifications of air wakes. Figure 2 depicts a basic CVG, vertical and horizontal CVGs installed on a simple superstructure, and horizontal CVGs installed on the bow and deck edges. The vertical CVGs would be closed at the deck but open at the top. Each horizontal CVG would be open at both ends. The dimensions of the CVGs installed on the aft edges of the superstructure would be chosen so that the portion of the flow modified by the vertical CVGs would interact synergistically with the portion of the flow modified by the horizontal CVG to move the air wake away from the takeoff-and-landing zone behind the superstructure. The deck-edge CVGs would be mounted flush with, and would extend slightly ahead of the bow of, the flight deck. The overall length of each tube would exceed that of the flight deck. Each deck-edge CVG would capture that portion of the airflow that generates a deck-edge vortex and would generate a columnar vortex of opposite sense to that of the unmodified vortex. The vortex generated by the CVG could be dispersed at its base, thereby removing unwanted turbulence in the path of an approaching airplane. The deck-edge CVGs would promote smooth flow over the entire flight deck. In the case of a Nimitz-class aircraft carrier like that of Figure 1, there would be a CVG on each of the outer edges of the two left portions of the flight deck and a single CVG on the right side of the flight deck. The forward-most CVG on the left side would take the generated vortex underneath the angled flight deck. A CVG could also be installed on the bow of the flight deck to smooth the flow of air onto the flight deck. In the case of wind incident on the deck from an azimuth other than straight ahead, the vortex generated by the bow CVG could, perhaps, be used to feed the CVG(s) of the leeward side edge of the flight deck.

Lamar, John E.↗
DOE OSTI2025

Properties and performance of lignin-based polyurethane foams from lignin and castor oil as synergistic bio-polyols

Lignin and castor oil with intrinsic hydroxyl groups are attractive green resources for polyurethane (PU) applications. However, lignin's heterogeneous and highly crosslinked structure, poor processability, as well as the feedstock variability, lead to inconsistent and poor performance of the final foam products. Castor oil-based polyurethane foam (PUF) has a relatively high price and density, which are big hurdles to its practical applications. Here, in this study, we hypothesized that synergistic bio-polyol mixtures composed of lignin and castor oil could balance the drawbacks from individual component. Castor oil could improve the dispersity of lignin, while lignin simultaneously addressed the issues caused by PUF prepared with castor oil, such as its high density and low thermal stability. For a comprehensive understanding of the effects of structural properties of lignin on its PUF processing and applications, various lignin fractions were isolated by co-solvent enhanced lignocellulosic fractionation (CELF) from different species, including hardwood, softwood, and herbaceous plants, and the processed lignins with different molecular weights were applied with castor oil. The lignin fractions with lower molecular weight showed good dispersity in castor oil with a high lignin content (up to 50 wt%) and completely replaced petroleum-based polyols. The produced foam with 50 wt% low-molecular-weight lignin fractions from woody biomass showed comparable/higher compressive strength (up to 20 psi) and thermal insulation performance (up to 5.69 R-value in −1 for 50 % L-Pine foam). In addition, this study revealed the relationship between lignin's structural properties and foam performance, providing insights for practical applications of lignin-based PUF.

Jeong, Soyeon [State Univ. of New York (SUNY), Syr↗
DOE OSTI2019

Effect of MgCl{sub 2} on the Corrosion Behavior of Copper Under Periodic Wet/Dry Cycle Condition

The corrosion behaviors of copper under periodic wet/dry cycle conditions were investigated. The characteristics of the corrosion product formed on copper were analyzed by x-ray diffraction, scanning electron microscopy, energy-dispersive spectroscopy, and in situ electrochemical impedance spectroscopy. Weight loss results showed that the corrosion of copper under an MgCl{sub 2} deposition condition was more severe than that under NaCl. The main corrosion products formed on the tested sample under NaCl deposition condition consisted of Cu{sub 2}Cl(OH){sub 3} and Cu{sub 2}O, while those under the MgCl{sub 2} deposition condition consisted of Cu{sub 2}Cl(OH){sub 3} and Mg{sub 2}(OH){sub 3}Cl·4H{sub 2}O. In the case of the NaCl deposition condition, a two-layered structure formed during the corrosion process. However, the corrosion product layer formed on copper under the MgCl{sub 2} deposition condition had an extremely loose structure. The effect of MgCl{sub 2} on the corrosion mechanism of copper is discussed.

36 MATERIALS SCIENCE↗