Search NASA⌕ Search

SEARCH · Search NASA

Results for “WIND MODELING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

Wing pressure distributions from subsonic tests of a high-wing transport model

A wind tunnel investigation was conducted on a generic, high-wing transport model in the Langley 14- by 22-Foot Subsonic Tunnel. This report contains pressure data that document effects of various model configurations and free-stream conditions on wing pressure distributions. The untwisted wing incorporated a full-span, leading-edge Krueger flap and a part-span, double-slotted trailing-edge flap system. The trailing-edge flap was tested at four different deflection angles (20 deg, 30 deg, 40 deg, and 60 deg). Four wing configurations were tested: cruise, flaps only, Krueger flap only, and high lift (Krueger flap and flaps deployed). Tests were conducted at free-stream dynamic pressures of 20 psf to 60 psf with corresponding chord Reynolds numbers of 1.22 x 10(exp 6) to 2.11 x 10(exp 6) and Mach numbers of 0.12 to 0.20. The angles of attack presented range from 0 deg to 20 deg and were determined by wing configuration. The angle of sideslip ranged from minus 20 deg to 20 deg. In general, pressure distributions were relatively insensitive to free-stream speed with exceptions primarily at high angles of attack or high flap deflections. Increasing trailing-edge Krueger flap significantly reduced peak suction pressures and steep gradients on the wing at high angles of attack. Installation of the empennage had no effect on wing pressure distributions. Unpowered engine nacelles reduced suction pressures on the wing and the flaps.

Applin, Zachary T.↗

VLTI-MATISSE Chromatic Aperture-Synthesis Imaging of η Carinae’s Stellar Wind Across the Brα Line: Periastron Passage Observations in February 2020

Context: Eta Carinae is a highly eccentric, massive binary system (semimajor axis∼15.5 au) with powerful stellar winds and a phase-dependent wind-wind collision (WWC) zone. The primary star, ηCar A, is a luminous blue variable (LBV); the secondary, η Car B, is a Wolf-Rayet or O star with a faster but less dense wind. Aperture-synthesis imaging allows us to study the mass loss from the enigmatic LBV η Car. Understanding LBVs is a crucial step toward improving our knowledge about massive stars and their evolution. Aims: Our aim is to study the intensity distribution and kinematics of η Car’s WWC zone. Methods: Using the VLTI-MATISSE mid-infrared interferometry instrument, we perform Brα imaging of η Car’s distorted wind. Results: We present the first VLTI-MATISSE aperture-synthesis images of η Car A’s stellar wind in several spectral channels distributed across the Brα 4.052 μm line (spectral resolving power R∼960). Our observations were performed close to periastron passage in February 2020 (orbital phase∼14.0022). The reconstructed iso-velocity images show the dependence of the primary stellar wind on wavelength or line-of-sight (LOS) velocity with a spatial resolution of 6 mas (∼14 au). The radius of the faintest outer wind regions is∼26 mas (∼60 au). At several negative LOS velocities, the primary stellar wind is less extended to the northwest than in other directions. This asymmetry is most likely caused by the WWC. Therefore, we see both the velocity field of the undisturbed primary wind and the WWC cavity. In continuum spectral channels, the primary star wind is more compact than in line channels. A fit of the observed continuum visibilities with the visibilities of a stellar wind CMFGEN model (CMFGEN is an atmosphere code developed to model the spectra of a variety of objects) provides a full width at half maximum fit diameter of the primary stellar wind of 2.84±0.06 mas (6.54±0.14 au). We compare the derived intensity distributions with the CMFGEN stellar wind model and hydrodynamic WWC models.

G Weigelt↗

Develop and verify soil/structure interaction for pile/foundation interaction

Phase II of the Offshore Code Comparison Collaboration, Continued, with Correlation and unCertainty (OC6) project was used to verify the implementation of a new soil-structure interaction (SSI) model for use within offshore wind turbine modeling software. The REDWIN Macro-element model implemented and verified in this study enables a computationally efficient way to model the linear and nonlinear SSI problem, including hysteretic damping, of a monopile structure. The modeling approach was integrated into several modeling tools and a series of increasingly complex simulations was conducted using the IEA 10MW reference turbine mounted on a monopile support structure to verify the coupling between the tools and the REDWIN Macro-element SSI model. This campaign includes only numerical verification between various software and modeling approaches so no experimental measurements are available. The load cases (LC) considered include: LC1 – static response of the tower and substructure LC2 – frequency and mode-shape analysis of the tower and substructure LC3 – response of the tower and substructure due to wind-only loading LC4 – response of the tower and substructure due to wave-only loading LC5 – response of the tower and substructure due to wind and wave loading. Detailed properties of the modeled system are found in the following reference, “Bergua, Roger, Amy Robertson, Jason Jonkman, and Andy Platt. 2021. "Specification Document for OC6 Phase II: Verification of an Advanced Soil-Structure Interaction Model for Offshore Wind Turbines.” Golden, CO: National Renewable Energy Laboratory. NREL/TP-5000-79938. https://www.nlr.gov/docs/fy21osti/79938.pdf. Details on the results from the OC6 Phase II project can be found in the following reference, “Bergua R, Robertson A, Jonkman J, et al. OC6 Phase II: Integration and verification of a new soil–structure interaction model for offshore wind design.” Wind Energy. 2022;25(5):793-810. doi:10.1002/we.2698

17 WIND ENERGY↗

A computer model of global thermospheric winds and temperatures

Output data from the NCAR Thermospheric GCM and a vector-spherical-harmonic (VSH) representation of the wind field are used in constructing a computer model of time-dependent global horizontal vector neutral wind and temperature fields at altitude 130-300 km. The formulation of the VSH model is explained in detail, and some typical results obtained with a preliminary version (applicable to December solstice at solar maximum) are presented graphically. Good agreement with DE-2 satellite measurements is demonstrated.

Killeen, T. L.↗

Behaviour related flight speeds of Sandwich Terns and their implications for wind farm collision rate modelling and impact assessment

Highlights: • Flight speeds of Sandwich Terns vary with behavioural states. • Flight speed is a vital part of wind turbine collision rate models (CRM) for birds. • The variation in flight speed has major consequences for CRM output. • CRM output is vital for adequate Environmental Impact Assessments. - Abstract: Accurate quantification of flight speeds is a prerequisite to accurately predict the numbers of collision victims of proposed wind farms using collision rate models that are a vital part of Environmental Impact Assessments. We used GPS-loggers on Sandwich Terns to collect novel data on instantaneous flight speeds during foraging trips, separated for different behavioural stages, and applied these estimates in a widely used collision rate model. Average flight speed during a foraging trip corrected for individual variation and flight type was 36.9 ± 12.3 SD km h{sup −1} and flight speed was highest during inbound commuting (44.4 ± 12.0 km h{sup −1}) and lowest during foraging (29.9 ± 10.7 km h{sup −1}). Our results show significant differences in flight speeds of Sandwich Terns between behaviour stages during foraging trips, which resulted in divergent estimates of collision victims due to wind turbines depending on the function of the area in which wind farms are proposed. Since these conclusions are likely to hold for many other bird species, we conclude that behaviour of birds in a proposed wind farm is a factor to take into account when modelling collision rates as part of the Environmental Impact Assessment.

17 WIND ENERGY↗

Introduction to and comparison of deep learning and optimization approaches to analytical wake modeling of a tilted wind turbine

This paper introduces innovative optimization and deep learning techniques to enhance the prediction of complex wake dynamics in the downstream wind velocity of tilted wind turbines. Traditional methods for calibrating the Bastankhah wake model often lead to increased errors in wind velocity distribution due to overfitting of the local wake characteristics. To address this issue, we propose an additional global optimization step to reduce errors in wind velocity predictions with respect to various wake parameters. Despite this improvement, the Bastankhah model's axisymmetric Gaussian wake shape limits its accuracy for complex wake structures. Therefore, we also propose a deep learning approach, which demonstrates promising results by accurately modeling complex wake shapes across a broader range of tilt angles with minimal computational cost. The deep learning approach achieves near-identical predictions to high-fidelity large-eddy simulations, representing a promising advancement in wake modeling.

17 WIND ENERGY↗

Comparison of special sensor microwave imager vector wind stress with model-derived and subjective products for the tropical Pacific

An assessment of a new source of vector wind stress data relative to existing analyses of the surface wind field is presented. The large-scale variability of vector wind stress generated by Atlas et al. (1991) and based on the special sensor microwave imager (SSM/I) remotely sensed observations of surface wind speed is compared with five operational and subjectively analyzed wind products across the tropical Pacific basin for the first year of SSM/I, July 1987 through June 1988. The spatial and temporal variability of the zonal component, meridional component, and curl of the wind stress are examined relative to their future use in wind-driven ocean model studies of tropical Pacific Ocean circulation.

Busalacchi, Antonio J.↗

A parameter study of the two-fluid solar wind

A two-fluid model of the solar wind was introduced by Sturrock and Hartle (1966) and Hartle and Sturrock (1968). In these studies the proton energy equation was integrated neglecting the heat conductive term. Later several authors solved the equations for the two-fluid solar wind model keeping the proton heat conductive term. Methods where the equations are integrated simultaneously outward and inward from the critical point were used. The equations were also integrated inward from a large heliocentric distance. These methods have been applied to cases with low coronal base electron densities and high base temperatures. In this paper we present a method of integrating the two-fluid solar wind equations using an iteration procedure where the equations are integrated separately and the proton flux is kept constant during the integrations. The technique is applicable for a wide range of coronal base densities and temperatures. The method is used to carry out a parameter study of the two-fluid solar wind.

Sandbaek, Ornulf↗

Using Machine Learning to Create Turbine Performance Models (Presentation)

Wind turbine power output is known to be a strong function of wind speed, but is also affected by turbulence and shear. In this work, new aerostructural simulations of a generic 1.5 MW turbine are used to explore atmospheric influences on power output. Most significant is the hub height wind speed, followed by hub height turbulence intensity and then wind speed shear across the rotor disk. These simulation data are used to train regression trees that predict the turbine response for any combination of wind speed, turbulence intensity, and wind shear that might be expected at a turbine site. For a randomly selected atmospheric condition, the accuracy of the regression tree power predictions is three times higher than that of the traditional power curve methodology. The regression tree method can also be applied to turbine test data and used to predict turbine performance at a new site. No new data is required in comparison to the data that are usually collected for a wind resource assessment. Implementing the method requires turbine manufacturers to create a turbine regression tree model from test site data. Such an approach could significantly reduce bias in power predictions that arise because of different turbulence and shear at the new site, compared to the test site.

17 WIND ENERGY↗

Understanding Dynamic Model Validation of a Wind Turbine Generator and a Wind Power Plant

Regional reliability organizations require power plants to validate the dynamic models that represent them to ensure that power systems studies are performed to the best representation of the components installed. In the process of validating a wind power plant (WPP), one must be cognizant of the parameter settings of the wind turbine generators (WTGs) and the operational settings of the WPP. Validating the dynamic model of a WPP is required to be performed periodically. This is because the control parameters of the WTGs and the other supporting components within a WPP may be modified to comply with new grid codes or upgrades to the WTG controller with new capabilities developed by the turbine manufacturers or requested by the plant owners or operators. The diversity within a WPP affects the way we represent it in a model. Diversity within a WPP may be found in the way the WTGs are controlled, the wind resource, the layout of the WPP (electrical diversity), and the type of WTGs used. Each group of WTGs constitutes a significant portion of the output power of the WPP, and their unique and salient behaviors should be represented individually. The objective of this paper is to illustrate the process of dynamic model validations of WTGs and WPPs, the available data recorded that must be screened before it is used for the dynamic validations, and the assumptions made in the dynamic models of the WTG and WPP that must be understood. Without understanding the correct process, the validations may lead to the wrong representations of the WTG and WPP modeled.

17 WIND ENERGY↗

WISDEM® v3.15.2 2024 (Wind-Plant Integrated System Design and Engineering Model) [SWR-14-05]

The Wind-Plant Integrated System Design and Engineering Model (WISDEM®) is a set of models for assessing overall wind plant cost of energy (COE). The models use wind turbine and plant cost and energy production as well as financial models to estimate COE and other wind plant system attributes. WISDEM® is accessed through Python, is built using OpenMDAO, and uses several sub-models that are also implemented within OpenMDAO. These sub-models can be used independently but they are required to use the overall WISDEM® turbine design capability. Please install all of the pre-requisites prior to installing WISDEM® by following the directions below. For additional information about the NWTC effort in systems engineering that supports WISDEM® development, please visit the official NREL systems engineering for wind energy website. https://www.nrel.gov/wind/systems-engineering.html

Dykes, Katherine↗

Virtual Flow Simulator

Virtual Flow Simulator (VFS) is a state-of-the-art computational fluid mechanics (CFD) package that is capable of simulating multi-physics/multi-phase flows with the most advanced turbulence models (RANS, LES) over complex terrains. The flow solver is based on the Curvilinear Immersed Boundary (CURVIB) method to handle geometrically complex and moving domains. Different modules of the VFS package can provide different simulation capabilities for specific applications ranging from the fluid-structure interaction (FSI) of solid and deformable bodies, the two-phase free surface flow solver based on the level set method for ocean waves, sediment transport models in rivers and the large-scale models of wind farms based on actuator lines and surfaces. All numerical features of VFS package have been validated with known analytical and experimental data as reported in the related journal articles. VFS package is suitable for a broad range of engineering applications within different industries. VFS has been used in different projects with applications in wind and hydrokinetic energy, offshore and near-shore ocean studies, cardiovascular and biological flows, and natural streams and river morphodynamics. Over the last decade, the development of VFS has been supported and assisted with the help of various United States companies and federal agencies that are listed in the sponsor lists. In this version, VFS-Wind contains all the necessary modeling tools for wind energy applications, including land-based and offshore wind farms. VFS is highly scalable to run on either desktop computers or high performance clusters (up to 16,000 CPUs). This released version comes with a detailed user’s manual and a set of case studies designed to facilitate the learning of the various aspects of the code in a comprehensive manner. The included documentation and support material has been elaborated in a collaboration effort with Sandia National Labs under the contract DE-EE0005482. The VFS-Wind source code is distributed under the GNU General Public License (GPL 2.0), offering to the community the flexibility to use and expand the capabilities of the package. We note that future publications including academic journals that result from the use of VFS must be cited appropriately under the GPL v.2 license agreement.

Yang, Xiaolei↗

Virtual Flow Simulator

Virtual Flow Simulator (VFS) is a state-of-the-art computational fluid mechanics (CFD) package that is capable of simulating multi-physics/multi-phase flows with the most advanced turbulence models (RANS, LES) over complex terrains. The flow solver is based on the Curvilinear Immersed Boundary (CURVIB) method to handle geometrically complex and moving domains. Different modules of the VFS package can provide different simulation capabilities for specific applications ranging from the fluid-structure interaction (FSI) of solid and deformable bodies, the two-phase free surface flow solver based on the level set method for ocean waves, sediment transport models in rivers and the large-scale models of wind farms based on actuator lines and surfaces. All numerical features of VFS package have been validated with known analytical and experimental data as reported in the related journal articles. VFS package is suitable for a broad range of engineering applications within different industries. VFS has been used in different projects with applications in wind and hydrokinetic energy, offshore and near-shore ocean studies, cardiovascular and biological flows, and natural streams and river morphodynamics. Over the last decade, the development of VFS has been supported and assisted with the help of various United States companies and federal agencies that are listed in the sponsor lists. In this version, VFS-Wind contains all the necessary modeling tools for wind energy applications, including land-based and offshore wind farms. VFS is highly scalable to run on either desktop computers or high performance clusters (up to 16,000 CPUs). This released version comes with a detailed user’s manual and a set of case studies designed to facilitate the learning of the various aspects of the code in a comprehensive manner. The included documentation and support material has been elaborated in a collaboration effort with Sandia National Labs under the contract DE-EE0005482. The VFS-Wind source code is distributed under the GNU General Public License (GPL 2.0), offering to the community the flexibility to use and expand the capabilities of the package. We note that future publications including academic journals that result from the use of VFS must be cited appropriately under the GPL v.2 license agreement.

Calderer, Antoni↗

WISDEM® (Wind-Plant Integrated System Design and Engineering Model) [SWR-14-05]

The Wind-Plant Integrated System Design and Engineering Model (WISDEM®) is a set of models for assessing overall wind plant cost of energy (COE). The models use wind turbine and plant cost and energy production as well as financial models to estimate COE and other wind plant system attributes. WISDEM® is accessed through Python, is built using OpenMDAO, https://openmdao.org/, and uses several sub-models that are also implemented within OpenMDAO. These sub-models can be used independently but they are required to use the overall WISDEM® turbine design capability. Please install all of the pre-requisites prior to installing WISDEM® by following the directions below. For additional information about the NWTC effort in systems engineering that supports WISDEM® development, please visit the official NREL systems engineering for wind energy website. https://www.nlr.gov/wind/systems-engineering

Ning, S.Andrew↗

Optimization under Uncertainty of Site-Specific Turbine Configurations: Preprint

Uncertainty affects many aspects of wind energy plant performance and cost. In this study, we explore opportunities for site-specific turbine configuration optimization that accounts for uncertainty in the wind resource. As a demonstration, a simple empirical model for wind plant cost of energy is used in an optimization under uncertainty to examine how different risk appetites affect the optimal selection of a turbine configuration for sites of different wind resource profiles. If there is unusually high uncertainty in the site wind resource, the optimal turbine configuration diverges from the deterministic case and a generally more conservative design is obtained with increasing risk aversion on the part of the designer.

17 WIND ENERGY↗

Numerical Prediction of Experimentally Observed Behavior of a Scale Model of an Offshore Wind Turbine Supported by a Tension-Leg Platform: Preprint

Realizing the critical importance the role physical experimental tests play in understanding the dynamics of floating offshore wind turbines, the DeepCwind consortium conducted a one-fiftieth-scale model test program where several floating wind platforms were subjected to a variety of wind and wave loading condition at the Maritime Research Institute Netherlands wave basin. This paper describes the observed behavior of a tension-leg platform, one of three platforms tested, and the systematic effort to predict the measured response with the FAST simulation tool using a model primarily based on consensus geometric and mass properties of the test specimen.

17 WIND ENERGY↗

Time-dependent models of radiatively driven stellar winds. I - Nonlinear evolution of instabilities for a pure absorption model

Numerical radiation-hydrodynamics simulations of the nonlinear evolution of instabilities in radiatively driven stellar winds have been performed. The results show a strong tendency for the unstable flow to form rather sharp rarefactions in which the highest speed material has very low density. The qualitative features of the model agree well with the reqirements of displaced narrow absorption components in UV lines.

Owocki, Stanley P.↗