Search NASA⌕ Search

SEARCH · Search NASA

Results for “analysis codes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

Utah FORGE: Fault Reactivation Through Fluid Injection Induced Seismicity Laboratory Experiments

Included are results from shear reactivation experiments on laboratory faults pre-loaded close to failure and reactivated by the injection of fluid into the fault. The sample comprises a single-inclined-fracture (SIF) transecting a cylindrical sample of Westerly granite. All experiments are conducted at ambient temperature and follow a similar protocol: (i) application of confining stresses (3MPa) on the fault fully saturated with DI water, (ii) shear-mobilization through the increase of axial loading at a constant displacement rate until a post-peak steady-state condition is reached, (iii) reduction of axial loading and related shear stress to a prescribed fraction of the peak steady-state frictional strength (typically 60% to 90%, representing intermediate to high magnitudes) and (iv), fault reactivation triggered by a stepwise increase of pore pressure on the fault in 0.1 MPa increments held constant for 1-5 minutes. Mechanical data from three ISCO pumps connected to a Temco pressure vessel measure axial, confining, and fault-related parameters, including fluid pressure (kPa), fluid flow rate (mL/min), and axial displacement (mm). See included code for initial data analysis and visualization for select experiments. Resource names represent experiment numbers found in the "Read Me" file, which describes each experimental setup and parameters.

15 GEOTHERMAL ENERGY↗

PyRAT (Python Radiography Analysis Tool): Overview [Slides]

PyRAT was developed as a quantitative tool for robustly characterizing objects from radiographs to solve problems such as the hybrid nonlinear inverse problem. The optimization software library that was used is the nonsmooth optimization by MADS algorithm (NOMAD). Some of PyRAT's features are: (1) hybrid nonlinear inverse problem with calculated x-ray spectrum and detector response; (2) optimization based inversion approach with goal of identifying unknown object configurations - MVO problem; (3) using functionalities of Python libraries for radiographic image processing and analysis; (4) using the Tikhonov regularization method of linear inverse problem to recover partial information of object configurations; (5) using a priori knowledge of problem solutions to define feasible region and discrete neighbor for the MVO problem - initial data analysis + material library $\Rightarrow$ a priori knowledge; and (6) using the NOMAD (C++ version) software in the object.

99 GENERAL AND MISCELLANEOUS↗

Plasma Interactions with Mixed Materials and Impurity Transport

The project brings together three discipline areas at LLNL to develop advanced capability to predict the impact of plasma/material interactions (PMI) on metallic surfaces in magnetic fusion energy (MFE) devices. These areas are (1) modeling transport of wall impurity ions through the edge plasma to the core plasma, (2) construction of a laser blow-off (LBO) system for injecting precise amounts of metallic atoms into a tokamak plasma, and (3) material science analysis of fundamental processes that modify metallic surfaces during plasma bombardment. The focus is on tungsten (W), which is being used for the ITER divertor and in designs of future MFE devices. In area (1), we have worked with the University of California, San Diego (UCSD) on applications of the UEDGE/DUSTT coupled codes to predict the influx of impurity ions from W dust through the edge plasma, including periodic edge-plasma oscillations, and revived a parallel version of UEDGE to speed up these simulations. In addition, the impurity transport model in the 2D UEDGE code has been implemented into the 3D BOUT++ turbulence/transport code to allow fundamental analysis of the impact of strong plasma turbulence on the impurity transport. In area (2), construction and testing of the LBO injection system has been completed. The original plan to install the LBO on the National Spherical Torus Experiment Upgrade (NSTX-U) at Princeton and its use to validate the impurity transport simulations is delayed owing to NSTX-U being offline for substantial magnetic coil repair period. In area (3), an analytic model has been developed to explain the growth of W tendrils (or fuzz) observed for helium-containing plasmas. Molecular dynamics calculations of W sputtering by W and deuterium (D) ions shows that a spatial blending of interatomic potentials is needed to describe the near-surface and deeper regions of the material.

36 MATERIALS SCIENCE↗

Study of movement of the western and central belts of Peninsular Malaysia using GPS data analysis

Since the large earthquakes in Sumatera and Nias, there were some tremors incidents at Bukit Tinggi. Therefore, a study on the earth’s crust movement and the effects of the earthquake in Indonesia on the tectonic blocks of Peninsular Malaysia have been carried out using GPS data analysis. GPS data from five MyRTKnet stations within Peninsular Malaysia have been analyzed to monitor the movement of two major tectonic blocks of Peninsular Malaysia which are the western belt represented by the Behrang (BEHR) and UPM Serdang (UPMS) stations and the central belt represented by Bentong (BENT), Jerantut (JRNT) and Temerloh (TLOH) stations. GPS data recorded from 2005 to 2010 were analysed based on horizontal and vertical displacements of the respective stations by using Trimble Business Centre (TBC) software. Based on the results of accumulated displacements of recorded GPS data from January 2006 to December 2013, it shows that the western belt which represented by UPMS has shifted 0.096m towards northwest with changes of ellipsoidal height of +0.030m while the central belt which represented by TLOH has shifted 0.080m towards northwest with changes of ellipsoidal height of −0.015m. Meanwhile, BENT station which is located on the Bentong-Raub suture zone turns to its original position as well as JRNT station. However, BEHR station which are located in western belt do not show any movements. All of these movements may be due to the influence of reactive faults in the stations area stimulated by several large earthquakes that occurred in 2005 to 2010. Study on using the GPS data analysis and combine with integrated geophysical methods are necessary to understand in detail about the tectonic evolution of Peninsular Malaysia.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Intuitive Visualizations Through Multi-Domain Projections for Performance Analysis at Scale

Performance analysis of parallel scientific codes is becoming increasingly difficult due to the rapidly growing complexity of applications and architectures. Existing tools fall short in providing intuitive views to reveal the root causes of performance problems. We have developed a new paradigm of projecting and visualizing performance data obtained from one domain onto other domains for faster, more intuitive analysis of applications. We gather performance data in three domains: hardware, application, and communication. For each domain, we define projections that allow the data to be viewed in the other domains. This framework is called the HAC model. The model not only allows us to directly compare the data across domains, but also allows us to use data visualization and analysis tools available in the other domains. Using the methodologies and visualization techniques mentioned above, we have demonstrated the careful unscrambling of otherwise tangled measurements caused by adaptive systems. By attributing performance measurements directly to their causes, we are able to visualize performance measurements in the domains most intuitive to the user, which are not necessarily those in which measurements are collected.

97 MATHEMATICS AND COMPUTING↗

Network Architecture Verification & Validation Tool

The NAVV Tool is an automation of Linux commands run Zeek IDS software on a packet capture to create a Microsoft Excel spreadsheet table breaking down network traffic observed. The tool automates the Zeek software analysis, the collation of logs, and then the dissection of the Conn.log and DNS.logs to create a summary table within a Excel. This spreadsheet can then be updated with network segments using CIDR formatting and labels along with inventory information including name and IP address. Using the tool again will integrate these label and color coding into the existing analysis table to aid in conducting an evaluation of the network traffic.

Nichols, DonovanW↗

Simplifying Performance Analysis of Large-scale Adaptive Scientific Applications

Performance analysis of parallel scientific codes is becoming increasingly difficult due to the rapidly growing complexity of applications and architectures. Existing tools fall short in providing intuitive views that facilitate the process of performance debugging and tuning. In this paper, we exploit a recent idea of projecting and visualizing performance data on the communication and hardware domain for faster, more intuitive analysis of applications. We leverage several performance analysis and visualization tools to showcase the discovery of scalability bottlenecks in a structured AMR library. Using novel techniques to project per-phase timing data, application data, and communication data on a communication graph, we identify a previously elusive scaling bottleneck in the library. We present solutions that mitigate this problem, resulting in 22% improvement in the performance for a 65,536-core run on an IBM Blue Gene/P system.

97 MATHEMATICS AND COMPUTING↗

Overview of System Integration Analysis Activities for Integrated Waste Management

Spent nuclear fuel (SNF) generated by the current fleet of commercial nuclear reactors is being stored at the reactor sites in spent fuel pools (SFPs) and in dry independent spent fuel storage installations (ISFSIs). The US Department of Energy Office of Nuclear Energy (DOE-NE) is developing an Integrated Waste Management Program (IWMP) comprising a suite of options and supporting analyses to enable future informed choices. The IWMP is organized into the following five major areas: 1) Consent-Based Siting, 2) IWM Facilities and Equipment Concepts and Development, 3) Transportation Capability Analysis and Support, 4) Information Technology Solutions and Support, and 5) System Integration Analysis and Support. This paper discusses the activities ongoing in the IWMP System Integration Analysis and Support area. Two main areas of research in system integration are data and tools development, as well as system analysis assessments. One of the tools being developed in the system integration area is the Used Nuclear Fuel-Storage, Transportation & Disposal Analysis Resource and Data System (UNF-ST&DARDS) tool. It is being developed as a foundational resource for DOE-NE to manage SNF data, along with several compatible analysis tools for time-dependent characterization of SNF and related systems. UNF-ST&DARDS has the unparalleled ability to track SNF through the entire back end of the fuel cycle—from the time the fuel is discharged from a reactor through its disposal in a geological repository. UNF ST&DARDS interfaces with the SCALE code system for nuclear analysis and COBRA-SFS for thermal analysis. Another main tool being developed is the Next Generation System Analysis Model (NGSAM). NGSAM is an agent-based simulation software tool expressly designed to be capable of modeling the waste management system. NGSAM has been developed to enable informed decision-making by providing the capability of analyzing various potential system options for the management of SNF and HLW. Using NGSAM, system architecture analyses are being conducted to support the future deployment of a comprehensive nuclear waste management system that considers all major back-end aspects of the nuclear fuel cycle (i.e., transportation, storage, and disposal). System analysis assessments may investigate the implications of various strategies such as different acceptance rates, acceptance queues, facility capacities and options, standardized canisters, and different assumed system operation start dates. Recently, some system analysis effort has begun to look at how the waste management system might operate for advanced reactor fuel cycles.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Development and Validation of Scale Nuclear Analysis Methods for High Temperature Gas-Cooled Reactors

In support of the U.S. Nuclear Regulatory Commission, ORNL is updating the nuclear analysis methods and data in the SCALE code system to support modeling of HTGRs. Development activities include methods used for reactor physics, criticality safety, and radiation shielding. This paper focuses on the nuclear methods in support of reactor physics, which primarily include lattice physics for cross-section processing of both prismatic and pebble-bed designs, Monte Carlo depletion methods and efficiency improvements for double heterogeneous fuels, and validation against relevant experiments. These methods enhancements are being validated using available experimental data from the HTTR and HTR-10 startup and initial criticality experiments. Results obtained with three-dimensional Monte Carlo models of the HTTR initial core critical configurations with SCALE6/KENO show excellent agreement between the continuous energy and multigroup methods and the results are consistent with results obtained by others. A three-dimensional multigroup Monte Carlo model for the initial critical core of the HTR-10 has been developed with SCALE6/KENO based on the benchmark specifications included in the IRPhE Handbook. The core eigenvalue obtained with this model is in very good agreement with the corresponding value obtained with a consistent continuous energy MCNP5 core model.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Uncertainty Analyses for Localized Tallies in Monte Carlo Eigenvalue Calculations

It is well known that statistical estimates obtained from Monte Carlo criticality simulations can be adversely affected by cycle-to-cycle correlations in the fission source. In addition, there are several other more fundamental issues that may lead to errors in Monte Carlo results. These factors can have a significant impact on the calculated eigenvalue, localized tally means and their associated standard deviations. In fact, modern Monte Carlo computational tools may generate standard deviation estimates that are a factor of five or more lower than the true standard deviation for a particular tally due to the inter-cycle correlations in the fission source. The magnitude of this under-prediction can climb as high as one hundred when combined with an ill-converged fission source or poor sampling techniques. Since Monte Carlo methods are widely used in reactor analysis (as a benchmarking tool) and criticality safety applications, an in-depth understanding of the effects of these issues must be developed in order to support the practical use of Monte Carlo software packages. A rigorous statistical analysis of localized tally results in eigenvalue calculations is presented using the SCALE/KENO-VI and MCNP Monte Carlo codes. The purpose of this analysis is to investigate the under-prediction in the uncertainty and its sensitivity to problem characteristics and calculational parameters, and to provide a comparative study between the two codes with respect to this under-prediction. It is shown herein that adequate source convergence along with proper specification of Monte Carlo parameters can reduce the magnitude of under-prediction in the uncertainty to reasonable levels; below a factor of 2 when inter-cycle correlations in the fission source are not a significant factor. In addition, through the use of a modified sampling procedure, the effects of inter-cycle correlations on both the mean value and standard deviation estimates can be isolated.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Recent SAM Code Improvement to Heat Transfer Modeling Capabilities

System Analysis Module (SAM) is currently under development at Argonne National Laboratory as a modern system-level modeling and simulation tool for advanced non-light water reactor (non-LWR) safety analyses. It utilizes the object-oriented application framework MOOSE to leverage the modern software environment and advanced numerical methods. The capabilities of SAM are being extended to enable the transient modeling, analysis, and design of various advanced nuclear reactor systems. This report summarizes recent SAM code improvement to heat transfer modeling capabilities to support system and core thermal-hydraulics analysis for advanced nuclear reactor systems. These new capabilities include implementation of the energy equation for solid structure in porous medium and its coupling with porous medium flow energy equation; coupling between one-dimensional flow equation and three-dimensional heat conduction equation; coupling between two-dimensional heat structure and three-dimensional porous medium flow equations; and implementation of effective thermal conductivity correlations for solid pebble beds and its validation against High Temperature Test Unit (HTTU) experimental data. Demonstration or validation test problems are also included in this report to confirm the successful implementation of these capabilities.

1D/3D coupling↗

The problem analysis of data processing performance in nuclear power plant computerized information and control system - 288

This paper is based on the data processing performance problems of operating command delay and system display not updating real-time for nuclear power plant computerized information and control system. The plant computerized information and control system is responsible for monitoring and controlling the plant operation, and it is a key part in the plant DCS system. Its data processing performance will affect the operation stability of nuclear power plant. The architecture, hardware configuration and data communication for plant computerized information and control system among the different levels in DCS are described. The main reasons affecting data processing performance in different signal channels are analyzed according to the plant load test results. The CPU load curves for real time server and central processing server are displayed, although the detailed cause for operating command delay and system display not updating realtime are not found, central processing server load is heavier than real time server which remind us to analyze the data processing of software resource scheduling deeply. So the resource distribution problem of software execution task is also analyzed according to CPU load test results. This paper provides the optimization analysis for data processing performance, and it is available and effective according to the latest test results. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Documentation of high impact visualizations and improvement plans for utilization of VisIt for reactor simulation

The primary goal of this milestone was to enable the visualization and analysis needs of the campaign's simulation codes. This goal was well accomplished. We have extended the VisIt visualization and analysis tool to be suitable for the Nek, UNIC, SAS, and DIABLO code teams. This represented a significant development effort, primarily in terms of tuning the processing of the very large data sets produced by the Nek code. As a result of our development, and of the support we provided, these groups have been able to successfully accomplish their visualization and analysis activities using VisIt. Visualization is an important part of the simulation process. It allows stakeholders to explore simulations and discover phenomena, to confirm assumptions, and to convey findings to a larger audience. Further, visualization software is complex and is an active research area, especially in the area of visualization of very large data sets, such as those produced by the Reactor campaign's Nek code. To meet the campaign's visualization and analysis needs, we chose to leverage the existing software tool, VisIt. VisIt is an open source, parallel visualization and analysis tool for interactively exploring scientific data. The tool represents approximately fifty man-years worth of effort, much of which was dedicated to techniques for processing large data and also to user interfaces. VisIt originated in the DOE's Advanced Simulation and Computing Initiative (ASCI) program, but is also actively developed by the Office of Science's Scientific Discovery through Advanced Computing (SciDAC) program, as well as by the at large open source community, including university partners. Our work for this effort consisted of both customizing VisIt to meet Reactor campaign needs and of providing support for stakeholders in the Reactor campaign to ensure they were successful using the tool.

99 GENERAL AND MISCELLANEOUS↗

SAS4A/SASSYS-1 Verification and Validation Plan for the Versatile Test Reactor

Software verification and validation (V&V) hold an important role in the safety analysis for nuclear facilities. Codes and models utilized in calculations that demonstrate the safety basis as part of a license application or authorization must demonstrate an acceptable pedigree with regard to key critical characteristics that are comprised of the functional and performance requirements of the software. This document describes the methodology for verification and validation of the SAS4A/SASSYS-1 systems-level liquid-metal safety analysis software in support of DOE authorization of the Versatile Test Reactor (VTR). The overall goal of this V&V effort is to demonstrate the suitability of SAS4A/SASSYS-1 for evaluation of safety performance and characterization of safety margins in VTR. To that end, the V&V methodology will be used to demonstrate the adequacy of the component and physical models of SAS4A/SASSYS-1 for the corresponding VTR design elements. This methodology, which has been derived as a generalized approach to the U.S. NRC’s evaluation model development and assessment process (EMDAP) of Regulatory Guide 1.203, entails four high-level activities: software requirements identification, assessment base development, determination of acceptance, and gap closure. The methodology has been generalized to be suitable for both verification and validation of the software for the VTR project. Several high-level engineering analysis quality assurance measures as well as supporting V&V methodology documentation are also described in this document to help support demonstration of software acceptance. To support initial development of the SAS4A/SASSYS-1 V&V basis, existing verification test problems and systems benchmarks are also identified and briefly described in this document.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Code Coverage Status of the ARC code GAMSRC

The Argonne Reactor Code (ARC) software system supports users in their fast reactor design goals by providing neutronic, thermal-hydraulic, and structural analysis capabilities. GAMSOR serves as procedure to obtain the neutron and gamma power distribution information in the ARC code system. GAMSOR is a specially modified version of DIF3D (dif3d.x becomes dif3d_gamsor.x). After some work, it was determined that carrying out software on GAMSOR was impractical and would not fit well with commercial grade dedication. GAMSRC was written in the last decade to replace GAMSOR such that the user can rely soley upon the verified DIF3D (dif3d.x) code and GAMSRC to obtain the neutron and gamma power distribution information. GAMSRC is also fully verified and ready for commercial grade dedication. In the coming years, GAMSOR will be deprecated and GAMSRC will fully take over in the ARC code system. This document identifies the set of test problems used to assess the code coverage for GAMSRC. The goal is to document what parts of the existing GAMSRC code are touched by the set of test problems and which are not. The code coverage analysis of GAMSRC was performed with the Code Coverage Tool of the Intel Fortran compiler which requires modifications to the compilation of GAMSRC. The code coverage tables are given for each submodule of GAMSRC. Because GAMSRC links to modules in DIF3D, some details on coverage changes to the DIF3D lined files is provided. As will be seen, most of the uncovered parts/files can be ignored because they are either for error message and debugging output or obviously not needed by GAMSRC today.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

LIFE Reactor Study: Fiscal Year 2013 Contract Report

Sensitivity study of LIFE Chamber dynamics with BUCKY radiation hydrodynamics simulation code: We will continue to model the interaction of ICF target ion and x-ray output with the LIFE reactor cavity and first wall using the BUCKY 1-D radiation hydrodynamics code. We specifically will address the approach to a cyclic steady state condition, blast conditions for the final optics, and the first wall temperature. We will interface BUCKY output with LLNL and UIUC codes for long time analysis of chamber conditions. We will perform sensitivity studies of the chamber as directed by LLNL through varying parameters such as the xenon opacities. Task 1 was accomplished. “Hand off” parameters produced by BUCKY were sent to UIUC for use as the source term in VTF 3-D simulations of the LIFE chamber. A number of parameter sweeps were done with the BUCKY code to see the influence on engineering quantities such as first surface maximum temperature and overpressure.

42 ENGINEERING↗

Human Factors Principles in Information Dashboard Design - 278

Refueling outages remain one of the largest opportunities for improving capacity factor and reducing costs available to commercial nuclear power plants. Although the nuclear industry has made steady improvement in outage optimization, each day of a refueling outage still represents an opportunity to save millions of dollars and each day an outage extends past its planned end date represents millions of dollars that may have been spent unnecessarily. Reducing planned outage duration or preventing outage extensions requires careful management of the outage schedule as well as constant oversight and monitoring of work completion during the outage execution. During a typical outage, there are typically more than 10,000 activities on the schedule that, if not managed efficiently, may cause expensive outage delays. Management of outages currently relies largely on paper-based resources and general-purpose office software. A typical method currently used to monitor work performance is a burn-down curve, where total remaining activities are plotted against the baseline schedule to track bulk work completion progress. While methods like this are useful, there is still considerable uncertainty during a typical outage whether bulk work progress is adequate and therefore a lot of management time is spent analyzing the situation on a daily basis. This paper is a case study of how new technology, in combination with established human-factors and user-centered design knowledge, can be used to support Outage Control Center (OCC) personnel decision making. In particular, we describe recent advances made in developing a framework for the design of visual outage information presentation, as well as an overview of the human factors principles that informed the development of the visualizations. To test the utility of advanced visual outage information presentation, an outage management dashboard software application was created as part of the Department of Energy's Advanced Outage Control Center project (AOCC). This dashboard is intended to present all the critical information an outage manager would need to understand the current status of a refueling outage. The dashboard presents the critical path, bulk work performance, key performance indicators, outage milestones and metrics relating current performance to historical performance. Additionally, the dashboard includes data analysis tools to allow outage managers to drill down into the underlying data to understand the drivers of the indicators. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Cosmological measurements with general relativistic galaxy correlations

We investigate the cosmological dependence and the constraining power of large-scale galaxy correlations, including all redshift-distortions, wide-angle, lensing and gravitational potential effects on linear scales. We analyze the cosmological information present in the lensing convergence and in the gravitational potential terms describing the so-called ''relativistic effects'', and we find that, while smaller than the information contained in intrinsic galaxy clustering, it is not negligible. We investigate how neglecting them does bias cosmological measurements performed by future spectroscopic and photometric large-scale surveys such as SKA and Euclid. We perform a Fisher analysis using the CLASS code, modified to include scale-dependent galaxy bias and redshift-dependent magnification and evolution bias. Our results show that neglecting relativistic terms, especially lensing convergence, introduces an error in the forecasted precision in measuring cosmological parameters of the order of a few tens of percent, in particular when measuring the matter content of the Universe and primordial non-Gaussianity parameters. The analysis suggests a possible substantial systematic error in cosmological parameter constraints. Therefore, we argue that radial correlations and integrated relativistic terms need to be taken into account when forecasting the constraining power of future large-scale number counts of galaxy surveys.

79 ASTRONOMY AND ASTROPHYSICS↗