Search NASA⌕ Search

SEARCH · Search NASA

Results for “certification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

A STUDY OF EXTRACTIVE AND REMOTE-SENSING SAMPLING AND MEASUREMENT OF EMISSIONS FROM MILITARY AIRCRAFT ENGINES

Aircraft emissions contribute to the increased atmospheric burden of particulate matter (e.g., black carbon and secondary organic compounds) that plays a role in air quality, contrail formation and climate change. Sampling and measurement of modern aircraft emissions at the engine exhaust plane (EEP) for to engine and fuel certification remains a daunting task, no agency-certified method is available for the task. In this paper we summarize the results of a recent study that was devoted to investigate both extractive and optical remote-sensing (ORS) technologies in sampling and measurement of gaseous and particulate matter (PM) emitted by a number of military aircraft engines operated with JP-8 and a Fischer-Tropsch (FT) fuel at various engine conditions. These engines include cargo, bomber, and helicopter types of military aircraft that consumes 70-80% of the military aviation fuel each year. The emission indices of selected pollutants are discussed as these data may be of interest for atmospheric modeling and for design of air quality control strategies around the airports and military bases. It was found that non-volatile particles in the engine emissions were all in the ultrafine range. The mean diameter of particles increased as the engine power increased; the mode diameters were in the 20nm range for the low power condition of a new helicopter engine to 80nm for the high power condition of a newly maintained bomber engine. Elemental analysis indicated little metals were present on particles in the exhaust, while most of the materials on the exhaust particles were based on carbon and sulfate. Carbon monoxide, carbon dioxide, nitrogen oxide, sulfur dioxide, formaldehyde, ethylene, acetylene, propylene, and alkanes were detected using both technologies. The last five species (in the air toxics category) were most noticeable only under the low engine power. The emission indices calculated based on the ORS data were however observed to differ significantly (up to 90%) from (typically lower than) those based on the extractive techniques. However, the ORS techniques were useful in providing non-intrusive real-time measurements of gaseous species in the exhaust plume, which warrants further development. The results obtained in this program validate sampling methodology and measurement techniques used for non-volatile PM aircraft emissions as described in the SAE AIR-6037.

54 ENVIRONMENTAL SCIENCES↗

An Analysis of Direct-injection spark-ignition (DISI) soot morphology

We have characterized particle emissions produced by a 4-cylinder, 2.0 L DISI engine using transmission electron microscopy (TEM) and image analysis. Analyses of soot morphology provide insight to particle formation mechanisms and strategies for prevention. Particle emissions generated by two fueling strategies were investigated, early injection and injection modified for low particle number concentration emissions. A blend of 20% ethanol and 80% emissions certification gasoline was used for the study given the likelihood of increased ethanol content in widely available fuel. In total, about 200 particles and 3000 primary soot spherules were individually measured. For the fuel injection strategy which produced low particle number concentration emissions, we found a prevalence of single solid sub-25 nm particles and fractal-like aggregates. The modal diameter of single solid particles and aggregate primary particles was between 10 and 15 nm. Solid particles as small as 6 nm were present. Although nanoparticle aggregates had fractal-like morphology similar to diesel soot, the average primary particle diameter per aggregate had a much wider range that spanned from 7 to 60 nm. For the early fuel injection strategy, liquid droplets were prevalent, and the modal average primary particle diameter was between 20 and 25 nm. The presence of liquid droplets may have been the result of unburned fuel and/or lubricating oil originating from fuel impingement on the piston or cylinder wall; the larger modal aggregate primary particle diameter suggests greater fuel-rich zones in-cylinder than for the low particle number concentration point. However, both conditions produced aggregates with a wide range of primary particle diameters, which indicates heterogeneous fuel and air mixing.

02 PETROLEUM↗

Overexpression of microRNA-125b inhibits human acute myeloid leukemia cells invasion, proliferation and promotes cells apoptosis by targeting NF-κB signaling pathway

microRNA-125b has been reported to play an novel biological function in the progression and development of several kinds of leukemia. However, the detail role of miR-125b in acute myeloid leukemia (AML) is remains largely unknown. The present study aimed to investigate the biological role of miR-125b in AML and the potential molecular mechanism involved in this process. Our results showed that overexpression of miR-125b suppressed AML cells proliferation, invasion and promotes cells apoptosis in a dose-dependent manner, while the miR-NC did not show the same effect. In addition, miR-125b induced AML cells G2/M cell cycle arrest in vitro. Overexpression of miR-125b resulted in a significant decrease of the expression of p-IκB-α and inhibition of IκB-α degradation, and the nuclear translocation of NF-κB subunit p65 was abrogated by miR-125b simutaneously. To further verify that miR-125b targeted NF-κB signaling pathway, the NF-κB-regulated downstream genes that were associated with cell cycle arrest and apoptosis was also determined. The results showed that, miR-125b also affect NF-κB-regulated genes expression involved in cell cycle arrest and apoptosis. In conclusion, the present work certificates that miR-125b can significantly inhibit human AML cells invasion, proliferation and promotes cells apoptosis by targeting the NF-κB signaling pathway, and thus it can be viewed as an promising therapeutic target for AML. - Highlights: • Overexpression of miR-125b suppressed AML cells proliferation, invasion and promotes cells apoptosis. • miR-125b induced AML cells G2/M cell cycle arrest in vitro. • miR-125b suppressed AML cells tumorigenicity and promoted cells apoptosis by targeting NF-κB pathway.

60 APPLIED LIFE SCIENCES↗

A multiscale cohesive law for carbon fiber networks

Better predictive models of mechanical failure in low-weight heat shield composites would aid material certification for missions with aggressive atmospheric entry conditions. In this study, we develop such a model for the rapid engineering analysis of the failure limits of phenolic impregnated carbon ablator (PICA) - a leading heat shield material whose structural component is a carbon fiber network. We hypothesize inelastic deformation failure mechanisms and model their behavior using molecular dynamics simulations to calculate the binding energy. We then upscale this binding energy to the macroscale using a renormalization argument. The approach delivers insightful and reasonably accurate macroscale predictions that compare favorably to experiments. In application, the model is validated for a particular variety of PICA by comparison to experiment and would then be used to study design scenarios in different entry conditions.

36 MATERIALS SCIENCE↗

Autoignition of CRC diesel surrogates at low temperature combustion conditions: Rapid compression machine experiments and modeling

As federal programs require increasingly stringent engine emissions and fuel economy standards, these ambitions can only be met if next-generation combustion technology is developed focusing on high-efficiency and low-emissions engines. Recent research has indicated the need to operate engines at higher compression ratios and with low temperature combustion (LTC) to achieve the needed gains in engine efficiency and reductions in emissions. Because there is a lack of understanding of the chemistry of diesel fuel components and their mixtures at these LTC conditions, this limits the ability to develop predictive chemical kinetic models that can be used to optimize engine combustion. The current study aims to fill in gaps in fundamental combustion data on surrogate fuel mixtures relevant to diesel fuels. Specifically, four multicomponent diesel surrogates formulated by the Coordinating Research Council (CRC) to emulate an ultra-low-sulfur research-grade #2 certification diesel fuel (CFA), namely V0a (4 components), V0b (5 components), V1 (8 components), and V2 (9 components), have been investigated in a rapid compression machine (RCM) through determination of total and first-stage ignition delay times. Autoignition characteristics of lean to rich fuel/O 2 /N 2 mixtures, for the four CRC surrogates and CFA, have been measured using an RCM at LTC relevant pressures and temperatures, in the ranges of 10–20 bar and 650–1000 K, respectively. The equivalence ratios have been varied by independently changing the oxygen mole fraction and the fuel mole fraction in the test mixtures, thereby illustrating the individual effects of oxygen concentration and fuel loading on diesel autoignition. Autoignition results of these four CRC surrogates are compared among them and with those of CFA. Some degree of agreement in autoignition response between each CRC surrogate and CFA is observed, while discrepancies are also identified and discussed. In addition, a detailed chemical kinetic model for diesel surrogates has been developed and validated against these newly-acquired RCM data. We find that this model shows reasonable agreement with the overall ignition delay time results of the current RCM experiments. Chemical kinetic analyses of the developed model were further conducted to help identify the reactions controlling the autoignition processes and the consumption of fuel components in CRC surrogates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Examining professional emergency managers in Korea

Although the number of emergency managers has risen in South Korea (hereafter referred to as Korea) over the years, their role is not yet as defined and noteworthy compared to other professions because of its unidisciplinary approach. This article investigates how Korea has to improve emergency managers' disciplinary approach to ultimately contribute to the goal of effective transnational disaster management. This study uses qualitative content analysis of government policies, college curricula, nongovernmental organizations' (NGOs') emergency-manager certification, and mass media coverage to compare emergency managers' unidisciplinary and multidisciplinary approaches. The key tenet is that Korea must change its emergency managers' unidisciplinary approach into a multidisciplinary approach because the former is less effective when dealing with complicated disaster management systems. To achieve this change, the stakeholders must carry out their assigned responsibilities under risk-oriented management. As for the study's international implications, developing nations may consider the enhancement of related educational curricula, collaborative learning, continuous evaluation, disaster awareness, and disaster prevention for the emergency managers' multidisciplinary approach.

54 ENVIRONMENTAL SCIENCES↗

Policy choices and outcomes for offshore wind auctions globally

Offshore wind energy is rapidly expanding, facilitated largely through auctions run by governments. We provide a detailed quantified overview of utilised auction schemes, including geographical spread, volumes, results, and design specifications. Our comprehensive global dataset reveals heterogeneous designs. Although most auction designs provide some form of revenue stabilisation, their specific instrument choices vary and include feed-in tariffs, one-sided and two-sided contracts for difference, mandated power purchase agreements, and mandated renewable energy certificates. We review the schemes used in all eight major offshore wind jurisdictions across Europe, Asia, and North America and evaluate bids in their jurisdictional context. We analyse cost competitiveness, likelihood of timely construction, occurrence of strategic bidding, and identify jurisdictional aspects that might have influenced auction results. We find that auctions are embedded within their respective regulatory and market design context, and are remarkably diverse, though with regional similarities. Auctions in each jurisdiction have evolved and tend to become more exposed to market price risks over time. Less mature markets are more prone to make use of lower-risk designs. Still, some form of revenue stabilisation is employed for all auctioned offshore wind energy farms analysed here, regardless of the specific policy choices. Our data confirm a coincidence of declining costs and growing diffusion of auction regimes.

17 WIND ENERGY↗

Short-Run Marginal Emission Factors Neglect Impactful Phenomena and are Unsuitable for Assessing the Power Sector Emissions Impacts of Hydrogen Electrolysis

This comment reacts to Ruhnau and Schiele's (2023) assessment of the cost and emissions impacts of electrolytic hydrogen production operating under different green hydrogen certification requirements in the EU. We critique the paper's use of short-run marginal emissions rates to estimate emissions impacts, a methodology which the literature has shown to be inadequate for assessing the full lifecycle emissions impacts of electricity sector interventions. We hope that our response clarifies the need to consider induced structural change when assessing the greenhouse gas emissions impacts of electricity sector decisions at all scales.

electricity↗

Pesticide application practices, pest knowledge, and cost-benefits of plantain production in the Bribri-Cabecar Indigenous Territories, Costa Rica

The use of pesticides in the cultivation of cash crops such as banana and plantain is increasing, in Costa Rica and worldwide. Agrochemical use and occupational and environmental exposures in export banana production have been documented in some parts of Central America. However, the extent of agrochemical use, agricultural pest knowledge, and economic components in plantain production are largely unknown in Costa Rica, especially in remote, high-poverty areas such as the Bribri-Cabecar Indigenous Territories. Our objective was to integrate a rapid rural appraisal of indigenous farmer pesticide application practices and pest knowledge with a cost-benefit analysis of plantain production in the Bribri-Cabecar Indigenous Territories, for the development of better agricultural management practices and improved regulatory infrastructure. Interviews conducted with 75 households in 5 indigenous communities showed that over 60% of participants grew plantain with agrochemicals. Of these plantain farmers, over 97% used the insecticide chlorpyrifos, and 84% applied nematicides, 64% herbicides, and 22% fungicides, with only 31% of participants reporting the use of some type of protective clothing during application. The banana weevil (Cosmopolites sordidus Germar) was ranked as the most important agricultural pest by 85% of participants, yet only 28% could associate the adult and larval form. A cost-benefit analysis conducted with a separate group of 26 plantain farmers identified several national markets and one export market for plantain production in the Indigenous Territories. Yearly income averaged US$6200/ha and yearly expenses averaged US$1872/ha, with an average cost-benefit ratio of 3.67 for plantain farmers. Farmers applied an average of 9.7 kg a.i./ha/yr of pesticide products and 375 kg/ha/yr of fertilizer, but those who sold their fruit to the national markets applied more nematicides, herbicides, and fertilizers than those who sold primarily to export markets, suggesting a lack of appropriate application knowledge. Results indicate that the quantity of agrochemicals applied in plantain cultivation is less than that applied in export banana, but the absence of appropriate agrochemical application practices in plantain cultivation may pose serious risks to human and environmental health. Culturally appropriate farmer education and certification programs are needed as well as the development of safe-handling practices, regulatory infrastructure, and adequate agrochemical storage, transport, and waste disposal facilities. Long-term solutions however, are dependent on the development of policies and infrastructure that support non-chemical pest management, alternatives to pesticides, and the identification of organic plantain markets.

60 APPLIED LIFE SCIENCES↗

Modeling spatial effects of PM{sub 2.5} on term low birth weight in Los Angeles County

Air pollution epidemiological studies suggest that elevated exposure to fine particulate matter (PM{sub 2.5}) is associated with higher prevalence of term low birth weight (TLBW). Previous studies have generally assumed the exposure–response of PM{sub 2.5} on TLBW to be the same throughout a large geographical area. Health effects related to PM{sub 2.5} exposures, however, may not be uniformly distributed spatially, creating a need for studies that explicitly investigate the spatial distribution of the exposure–response relationship between individual-level exposure to PM{sub 2.5} and TLBW. Here, we examine the overall and spatially varying exposure–response relationship between PM{sub 2.5} and TLBW throughout urban Los Angeles (LA) County, California. We estimated PM{sub 2.5} from a combination of land use regression (LUR), aerosol optical depth from remote sensing, and atmospheric modeling techniques. Exposures were assigned to LA County individual pregnancies identified from electronic birth certificates between the years 1995-2006 (N=1,359,284) provided by the California Department of Public Health. We used a single pollutant multivariate logistic regression model, with multilevel spatially structured and unstructured random effects set in a Bayesian framework to estimate global and spatially varying pollutant effects on TLBW at the census tract level. Overall, increased PM{sub 2.5} level was associated with higher prevalence of TLBW county-wide. The spatial random effects model, however, demonstrated that the exposure–response for PM{sub 2.5} and TLBW was not uniform across urban LA County. Rather, the magnitude and certainty of the exposure–response estimates for PM{sub 2.5} on log odds of TLBW were greatest in the urban core of Central and Southern LA County census tracts. These results suggest that the effects may be spatially patterned, and that simply estimating global pollutant effects obscures disparities suggested by spatial patterns of effects. Studies that incorporate spatial multilevel modeling with random coefficients allow us to identify areas where air pollutant effects on adverse birth outcomes may be most severe and policies to further reduce air pollution might be most effective. - Highlights: • We model the spatial dependency of PM{sub 2.5} effects on term low birth weight (TLBW). • PM{sub 2.5} effects on TLBW are shown to vary spatially across urban LA County. • Modeling spatial dependency of PM{sub 2.5} health effects may identify effect 'hotspots'. • Birth outcomes studies should consider the spatial dependency of PM{sub 2.5} effects.

54 ENVIRONMENTAL SCIENCES↗

Residential agricultural pesticide exposures and risks of preeclampsia

Highlights: • Pesticides and preeclampsia have been rarely investigated. • Studied were >200,000 births and exposures to >500 pesticides. • There was a general lack of association between pesticide exposures and preeclampsia. • It is possible that unobserved early fetal loss may have biased risk estimates. We investigated risks of preeclampsia phenotypes from potential residential pesticide exposures, including 543 individual chemicals and 69 physicochemical groupings that were applied in the San Joaquin Valley of California during the study period, 1998–2011. The study population was derived from birth certificate data linked with Office of Statewide Health Planning and Development maternal and infant hospital discharge data. The following numbers of women with preeclampsia phenotypes were identified: 1045 with superimposed (pre-existing hypertension with preeclampsia) preeclampsia (265 with gestational weeks 20–31 and 780 with gestational weeks 32–36); 3471 with severe preeclampsia (824 with gestational weeks 20–31 and 2647 with gestational weeks 32–36); and 2780 with mild preeclampsia (207 with gestational weeks 20–31 and 2573 with gestational weeks 32–36). The reference population for these groups was 197,461 women who did not have diabetes (gestational or pre-existing), did not have any hypertensive disorder, and who delivered at 37 weeks or later. The frequency of any exposure was lower or about the same in each preeclampsia case group (further delineated by gestational age), and month time period, relative to the frequency in reference population controls. Nearly all odds ratios were below 1.0 for these any vs no exposure comparisons. This study showed a general lack of increased risks between a range of agriculture pesticide exposures near women's residences and various preeclampsia phenotypes.

60 APPLIED LIFE SCIENCES↗

Assessment of human nuclear and mitochondrial DNA qPCR assays for quantification accuracy utilizing NIST SRM 2372a

In forensic DNA casework, a highly accurate real-time quantitative polymerase chain reaction (qPCR) assay is recommended per the Scientific Working Group on DNA Analysis Methods (SWGDAM) (SWGDAM Validation Guidelines for DNA Analysis Methods [1]) to determine whether a DNA sample is of sufficient quantity and robust quality to move forward with downstream short tandem repeats (STR) or sequencing analyses. Most of these assays rely on a standard curve, referred to herein and traditionally as absolute qPCR, in which an unknown is compared, relative to that curve. However, one fundamental issue with absolute qPCR is the quantifiable concentration of commercial assay standards can vary depending on (1) origin, i.e., whether from a cell line or a human subject, (2) supplier, (3) lot number, (4) shipping method, etc. In 2018, the National Institute for Standards and Technology (NIST) released a human DNA standard reference material for evaluating qPCR quantification standards, Standard Reference Material (SRM) 2372a, Romsos et al. (2018) [2] which contains three well-characterized human genomic DNA samples: Component A) a single male1 donor, Component B) a single female 1 donor, and Component C) a 1:3 male 2 :female 2 donor, each with certification data for nDNA and informational mitochondrial DNA(mtDNA)/nuclear DNA (nDNA) ratio data. The SRM 2372a was used to assess four qPCR assays: (1) Quantifiler Trio (Thermo Fisher Scientific, Waltham, MA) for nDNA quantification, (2) NovaQUANT (EMD Millipore Corporation, San Diego, CA) for nDNA and mtDNA quantification, (3) a custom duplex mtDNA assay, and (4) a custom triplex mtDNA assay. Additionally, extracts from eighteen (18) skeletal remains were tested with the latter three assays for concordance of DNA concentration and with assays (2) and (3), for the degradation state. Our assessment revealed that an accurate, efficient, and reproducible qPCR assay is dependent on (1) the quality and reliability of the DNA standard, (2) the qPCR chemistry, and (3) the specific primers, and probes (if applicable), used in an assay. Finally, our findings indicate qPCR assays may not always quantify as expected and that performance of each lot should be verified using a well-characterized DNA standard such as the NIST SRM 2372a and adjusted if warranted.

59 BASIC BIOLOGICAL SCIENCES↗

A review on the fatigue behavior of Ti-6Al-4V fabricated by electron beam melting additive manufacturing

Electron beam melting (EBM) is a swiftyly-developing metal additive manufacturing process that holds significant interest in the aerospace and biomedical industries for the high-strength titanium alloy, Ti-6Al-4V. These industries have fatigue-limited applications, yet a lack of understanding of the EBM process-microstructure-fatigue relationships limit widespread use and presents challenges for certification. In this review, uniaxial fatigue data was collected and the effects of build orientation, surface roughness, and hot-isostatic pressing are linked to the fatigue properties highlighting microstructure, defects, and failure mechanisms. The observations and conclusions are supported by statistical analysis using the mean fatigue life obtained by the Statistical Fatigue-Limit Model. Both EBM-process and post-process structure relationships are discussed in order to identify the best-practice for fatigue-resistant design. The performance of the EBM material is compared to conventionally manufactured Ti-6Al-4V and possible methods to increase the fatigue resistance are discussed. Anisotropic fatigue behavior was observed in as-fabricated parts and no statistical distinction was found in the fatigue performance of HIPed and as-fabricated material provided the same as-fabricated rough surface condition. However, comparable fatigue life to traditionally manufactured lamellar Ti-6Al-4V is achieved when both post-process HIP and machining are applied to EBM-fabricated parts.

36 MATERIALS SCIENCE↗

In situ X-ray imaging of pore formation mechanisms and dynamics in laser powder-blown directed energy deposition additive manufacturing

Directed energy deposition (DED) additive manufacturing (AM) is receiving growing attention in many applications, such as repair, remanufacturing, and fabrication of functionally graded structures. However, the laser-matter interactions and melt pool dynamics in laser DED with powder flow are still unclear, particularly in how pores form and flow inside the melt pool during the process. Understanding the porosity formation mechanisms is critical in the qualification, certification, and overall properties of a DED AM part. Porosity is a common phenomenon and can significantly hinder the quality of DED fabricated parts, as the pores can act as sites of crack nucleation and propagation. Here in this paper, we reveal four types of pore formation mechanisms through in-situ and operando high-speed high-resolution X-ray imaging in the DED AM process. Our results confirm that porosity within the feedstock powder induces pores in the process. We also observed pore formation mechanisms unique to the laser-based, powder-blown DED process as a result of powder delivery, keyhole dynamics, melt pool dynamics, and shield gas. High-speed X-ray images provide direct evidence for pore formation mechanisms and show that the pores related to the interaction between the delivered powder and melt pool are the largest in size in laser-based powder-blown DED AM. These results will guide porosity mitigation, elimination, and control in DED AM.

36 MATERIALS SCIENCE↗

Revealing melt flow instabilities in laser powder bed fusion additive manufacturing of aluminum alloy via in-situ high-speed X-ray imaging

Laser metal additive manufacturing technologies enable the fabrication of geometrically and compositionally complex parts unachievable by conventional manufacturing methods. However, the certification and qualification of additively manufactured parts are greatly hindered by the stochastic melt flow instabilities intrinsic to the process, which has not been explicitly revealed by direct observation. Here, we report the mechanisms of the melt flow instabilities in laser powder bed fusion additive manufacturing process revealed by in-situ high-speed high-resolution synchrotron X-ray imaging. Here we identified powder/droplet impact, significant keyhole oscillation, and melting-mode switching as three major mechanisms for causing melt flow instabilities. We demonstrated the detrimental consequences of these instabilities brought to the process, and presented new understanding on the melt flow evolution and keyhole oscillation. This work provides critical insights into process instabilities during laser metal additive manufacturing, which may guide the development of instability mitigation approaches. The results reported here are also important for the development and validation of high-fidelity computational models.

36 MATERIALS SCIENCE↗

Radiotherapy and Survival in Prostate Cancer Patients: A Population-Based Study

Purpose: To investigate the association of overall and disease-specific survival with the five standard treatment modalities for prostate cancer (CaP): radical prostatectomy (RP), brachytherapy (BT), external beam radiotherapy, androgen deprivation therapy, and no treatment (NT) within 6 months after CaP diagnosis. Methods and Materials: The study population included 10,179 men aged 65 years and older with incident CaP diagnosed between 1999 and 2001. Using the linked Ohio Cancer Incidence Surveillance System, Medicare, and death certificate files, overall and disease-specific survival through 2005 among the five clinically accepted therapies were analyzed. Results: Disease-specific survival rates were 92.3% and 23.9% for patients with localized vs. distant disease at 7 years, respectively. Controlling for age, race, comorbidities, stage, and Gleason score, results from the Cox multiple regression models indicated that the risk of CaP-specific death was significantly reduced in patients receiving RP or BT, compared with NT. For localized disease, compared with NT, in the monotherapy cohort, RP and BT were associated with reduced hazard ratios (HR) of 0.25 and 0.45 (95% confidence intervals 0.13-0.48 and 0.23-0.87, respectively), whereas in the combination therapy cohort, HR were 0.40 (0.17-0.94) and 0.46 (0.27-0.80), respectively. Conclusions: The present population-based study indicates that RP and BT are associated with improved survival outcomes. Further studies are warranted to improve clinical determinates in the selection of appropriate management of CaP and to improve predictive modeling for which patient subsets may benefit most from definitive therapy vs. conservative management and/or observation.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Radiation Therapy and Late Mortality From Second Sarcoma, Carcinoma, and Hematological Malignancies After a Solid Cancer in Childhood

Purpose: To compare patterns of long-term deaths due to secondary carcinomas, sarcomas, and hematological malignancies occurring after childhood cancer in a cohort of patients followed over a median of 28 years. Methods and Materials: The study included 4,230 patients treated at eight institutions, who were at least 5-year survivors of a first cancer, representing 105,670 person-years of observation. Complete clinical, chemotherapeutic, and radiotherapeutic data were recorded, and the integral radiation dose was estimated for 2,701 of the 2,948 patients who had received radiotherapy. The integral dose was estimated for the volume inside the beam edges. The causes of death obtained from death certificates were validated. Results: In total, 134 events were due to second malignant neoplasm(s) (SMN). We found that the standardized mortality ratio decreased with increasing follow-up for second carcinomas and sarcomas, whereas the absolute excess risk (AER) increased for a second carcinoma but decreased for second sarcomas. There was no clear variation in SMN and AER for hematological malignancies. We found a significant dose-response relationship between the radiation dose received and the mortality rate due to a second sarcoma and carcinoma. The risk of death due to carcinoma and sarcoma as SMN was 5.2-fold and 12.5-fold higher, respectively, in patients who had received a radiation dose exceeding 150 joules. Conclusions: Among patients who had received radiotherapy, only those having received the highest integral radiation dose actually had a higher risk of dying of a second carcinoma or sarcoma.

62 RADIOLOGY AND NUCLEAR MEDICINE↗