Search NASA⌕ Search

SEARCH · Search NASA

Results for “compact objects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

Energy Saving Melting and Revert Reduction Technology: Aging of Graphitic Cast Irons and Machinability

The objective of this task was to determine whether ductile iron and compacted graphite iron exhibit age strengthening to a statistically significant extent. Further, this effort identified the mechanism by which gray iron age strengthens and the mechanism by which age-strengthening improves the machinability of gray cast iron. These results were then used to determine whether age strengthening improves the machinability of ductile iron and compacted graphite iron alloys in order to develop a predictive model of alloy factor effects on age strengthening. The results of this work will lead to reduced section sizes, and corresponding weight and energy savings. Improved machinability will reduce scrap and enhance casting marketability. Technical Conclusions: Age strengthening was demonstrated to occur in gray iron ductile iron and compacted graphite iron. Machinability was demonstrated to be improved by age strengthening when free ferrite was present in the microstructure, but not in a fully pearlitic microstructure. Age strengthening only occurs when there is residual nitrogen in solid solution in the Ferrite, whether the ferrite is free ferrite or the ferrite lamellae within pearlite. Age strengthening can be accelerated by Mn at about 0.5% in excess of the Mn/S balance Estimated energy savings over ten years is 13.05 trillion BTU, based primarily on yield improvement and size reduction of castings for equivalent service. Also it is estimated that the heavy truck end use of lighter castings for equivalent service requirement will result in a diesel fuel energy savings of 131 trillion BTU over ten years.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Two-Phase Cooling for High Packaging Density Planar Inverter: Cooperative Research and Development Final Report, CRADA Number CRD-15-00592

The project objective was to utilize two-phase heat transfer to enable compact and power-dense inverters. The high heat transfer capacity and near isothermal characteristics of two-phase cooling can enable higher power densities, reducing the size and cost of the power electronics system. This project focused on developing efficient, passive (no pump or compressor) two-phase cooling strategies that consist of an air-cooled condenser and evaporator. This report describes the modeling work conducted to design the evaporator and air-cooled condenser for a prototype inverter development work underway in the John Deere. Prototypes of the final evaporator and condenser designs were then fabricated via 3D printing for testing. Experiments on the evaporator confirmed that this component can meet the heat load and junction temperatures requirements for Si IGBT (insulated-gate bipolar transistor) inverter. Experiments with the air-cooled condenser were not possible due to leaks through the condenser walls.

33 ADVANCED PROPULSION SYSTEMS↗

Additive Manufacturing of Corrosion Resistant UHTC Materials for Chloride Salt-to-sCO2 Brayton Cycle Heat Exchangers

The objectives of the project include: (1) screen high-purity, high density ultra-high-temperature ceramics (UHTCs) for chloride salt corrosion resistance, (2) develop binder-jet additive manufacturing and sintering for ZrB 2 -MoSi 2 blends using literature and experiments to demonstrate feasibility, and (3) evaluate chloride salt corrosion resistance of additively manufactured ZrB 2 -MoSi 2 . These initial objectives support the development of a durable and reliable ultra-compact high-efficiency salt-to-sCO 2 heat exchanger for closed-loop Brayton power cycles based on corrosion resistant, high-strength, thermally conductive UHTC materials and novel designs enabled by additive manufacturing. The UHTC materials are also abrasion resistant so that they could be applicable to all three thermal carrier media pathways identified in the CSP Gen3 Roadmap.

36 MATERIALS SCIENCE↗

MAD ADAPTIVE OPTICS IMAGING OF HIGH-LUMINOSITY QUASARS: A PILOT PROJECT

We present near-IR images of five luminous quasars at z ∼ 2 and one at z ∼ 4 obtained with an experimental adaptive optics (AO) instrument at the European Southern Observatory Very Large Telescope. The observations are part of a program aimed at demonstrating the capabilities of multi-conjugated adaptive optics imaging combined with the use of natural guide stars for high spatial resolution studies on large telescopes. The observations were mostly obtained under poor seeing conditions but in two cases. In spite of these nonoptimal conditions, the resulting images of point sources have cores of FWHM ∼ 0.2 arcsec. We are able to characterize the host galaxy properties for two sources and set stringent upper limits to the galaxy luminosity for the others. We also report on the expected capabilities for investigating the host galaxies of distant quasars with AO systems coupled with future Extremely Large Telescopes. Detailed simulations show that it will be possible to characterize compact (2–3 kpc) quasar host galaxies for quasi-stellar objects at z = 2 with nucleus K -magnitude spanning from 15 to 20 (corresponding to absolute magnitude −31 to −26) and host galaxies that are 4 mag fainter than their nuclei.

79 ASTRONOMY AND ASTROPHYSICS↗

A comparative study of long and short GRBS. I. Overlapping properties

Gamma-ray bursts (GRBs) are classified into long and short categories based on their durations. Broadband studies suggest that these two categories of objects roughly correspond to two different classes of progenitor systems, i.e., compact star mergers (Type I) versus massive star core collapse (Type II). However, the duration criterion sometimes leads to mis-identification of the progenitor systems. We perform a comprehensive multi-wavelength comparative study between duration-defined long GRBs and short GRBs as well as the so-called “consensus” long GRBs and short GRBs (which are believed to be more closely related to the two types of progenitor systems). The parameters we study include two parts: the prompt emission properties including duration (T {sub 90}), spectral peak energy (E{sub p}), low energy photon index (α), isotropic γ-ray energy (E{sub γ,iso}), isotropic peak luminosity (L{sub p,iso}), and the amplitude parameters (f and f{sub eff}); and the host galaxy properties including stellar mass (M{sub ∗}), star formation rate, metallicity ([X/H]), half light radius (R {sub 50}), angular and physical (R{sub off}) offset of the afterglow from the center of the host galaxy, the normalized offset (r{sub off}=R{sub off}/R{sub 50}), and the brightness fraction F{sub light}. For most parameters, we find interesting overlapping properties between the two populations in both one-dimensional (1D) and 2D distribution plots. The three best parameters for the purpose of classification are T {sub 90}, f{sub eff}, and F{sub light}. However, no single parameter alone is good enough to place a particular burst into the right physical category, suggesting the need for multiple criteria for physical classification.

79 ASTRONOMY AND ASTROPHYSICS↗

The structure of supersonic jet flow and its radiated sound

Large-eddy simulation of a supersonic jet is presented with emphasis on capturing the unsteady features of the flow pertinent to sound emission. A high-accuracy numerical scheme is used to solve the filtered, unsteady, compressible Navier-Stokes equations while modelling the subgrid-scale turbulence. For random inflow disturbance, the wave-like feature of the large-scale structure is demonstrated. The large-scale structure was then enhanced by imposing harmonic disturbances to the inflow. The limitation of using the full Navier-Stokes equation to calculate the far-field sound is discussed. Application of Lighthill's acoustic analogy is given with the objective of highlighting the difficulties that arise from the non-compactness of the source term.

Mankbadi, Reda R.↗

CHANDRA Detection of the AM CVn Binary ES Cet (KUV 01584-0939)

We report on Chandra ACE observations of the ultracompact AM CVn binary ES Cet. This object has a 10.3 minute binary period and is the most compact of the confirmed AM CVn systems. We have, for the first time, unambiguously detected the X-ray counterpart to ES Cet. In a 20 ksec ACIS-S image a point-like X-ray source is found within 1 sec. of the catalogued optical position. The mean countrate in ACIS-S is 0.013/s, and there is no strong evidence for variability. We folded the X-ray data using the optical ephemeris of Warner & Woudt, but did not detect any significant modulation. If an approx. = 100% modulation similar to those seen in the ultracompact candidates V407 Vu1 and Rx J0806.3+1527 were present then we would have detected it. The upper limit (3(sigma)) to any modulation at the putative orbital period is approx. 40% (rms). We extract the first X-ray spectrum from ES Cet, and find that it is not well described by simple continuum models. We find suggestive evidence for discrete spectral components at approx. 470 and 890 eV, that can be modelled as gaussian emission lines. In comparison with recent X-ray detections of nitrogen and neon in another AM CVn system (GP Com), it appears possible that these features may represent emission lines from these same elements; however, deeper spectroscopy will be required to confirm this. Our best spectral model includes a black body continuum with kT = 0.8 keV along with the gaussian lines. The 0.2 - 5 keV X-ray flux was approx. 7 x 10(exp -14) ergs/sq cm s. The luminosity implied by this flux for any reasonable distance is much smaller than that expected for a mass accretion rate as high as m = 10(exp -8) solar mass/yr, suggesting that the bulk of the accretion luminosity is below 100 eV and not seen with Chandra. We discuss the implications of our results for the nature of ES Cet.

Strohmayer, Tod E.↗

A search for X-ray emission from optically quiet, compact radio sources

A search for X-ray emission from optically quiet, compact radio sources reveals that such sources are significantly weaker X-ray emitters than are optically identified objects with comparable radio properties. For the radio samples examined here, the X-ray luminosity, relative to the radio, is typically at least 3 times lower in the optically quiet, compact radio sources than in the optically identified ones. Possible reasons for the distinction between optically quiet, compact radio sources and other compact radio sources are discussed. If strong nonthermal sources occur in the nuclei of dust-rich galaxies and do not eliminate the dust and gas of the interstellar medium, a few percent of such sources should be optically faint and red (due to extinction by dust) and X-ray weak (due to K-edge absorption). However, many optically quiet, compact radio sources are apparently 'blazars' with particularly sharp high-frequency breaks in their synchrotron spectra.

Ledden, J. E.↗

Parallelization of an Object-Oriented Unstructured Aeroacoustics Solver

A computational aeroacoustics code based on the discontinuous Galerkin method is ported to several parallel platforms using MPI. The discontinuous Galerkin method is a compact high-order method that retains its accuracy and robustness on non-smooth unstructured meshes. In its semi-discrete form, the discontinuous Galerkin method can be combined with explicit time marching methods making it well suited to time accurate computations. The compact nature of the discontinuous Galerkin method also makes it well suited for distributed memory parallel platforms. The original serial code was written using an object-oriented approach and was previously optimized for cache-based machines. The port to parallel platforms was achieved simply by treating partition boundaries as a type of boundary condition. Code modifications were minimal because boundary conditions were abstractions in the original program. Scalability results are presented for the SCI Origin, IBM SP2, and clusters of SGI and Sun workstations. Slightly superlinear speedup is achieved on a fixed-size problem on the Origin, due to cache effects.

Baggag, Abdelkader↗

OPTICAL SPECTRA OF CANDIDATE INTERNATIONAL CELESTIAL REFERENCE FRAME (ICRF) FLAT-SPECTRUM RADIO SOURCES

Continuing our program of spectroscopic observations of International Celestial Reference Frame (ICRF) sources, we present redshifts for 120 quasars and radio galaxies. Data were obtained with five telescopes: the 3.58 m European Southern Observatory New Technology Telescope, the two 8.2 m Gemini telescopes, the 2.5 m Nordic Optical Telescope (NOT), and the 6.0 m Big Azimuthal Telescope of the Special Astrophysical Observatory in Russia. The targets were selected from the International VLBI Service for Geodesy and Astrometry candidate International Celestial Reference Catalog which forms part of an observational very long baseline interferometry (VLBI) program to strengthen the celestial reference frame. We obtained spectra of the potential optical counterparts of more than 150 compact flat-spectrum radio sources, and measured redshifts of 120 emission-line objects, together with 19 BL Lac objects. These identifications add significantly to the precise radio-optical frame tie to be undertaken by Gaia, due to be launched in 2013, and to the existing data available for analyzing source proper motions over the celestial sphere. We show that the distribution of redshifts for ICRF sources is consistent with the much larger sample drawn from Faint Images of the Radio Sky at Twenty cm (FIRST) and Sloan Digital Sky Survey, implying that the ultra-compact VLBI sources are not distinguished from the overall radio-loud quasar population. In addition, we obtained NOT spectra for five radio sources from the FIRST and NRAO VLA Sky Survey catalogs, selected on the basis of their red colors, which yielded three quasars with z > 4.

79 ASTRONOMY AND ASTROPHYSICS↗

A SPITZER-MIPS SEARCH FOR DUST IN COMPACT HIGH-VELOCITY H I CLOUDS

We employ three-band Spitzer-MIPS observations to search for cold dust emission in three neutral hydrogen compact high-velocity clouds (CHVCs) in the vicinity of the Milky Way. Far-infrared emission correlated with H I column density was previously reported in HVC Complex C, indicating that this object contains dust heated by the Galactic radiation field at its distance of {approx}10 kpc. Assuming published Spitzer, IRAS, and Planck, IR-H I correlations for Complex C, our Spitzer observations are of sufficient depth to directly detect 160 {mu}m dust emission in the CHVCs if it is present at the same level as in Complex C, but no emission is detected in any of the targets. For one of the targets (CHVC289) which has well-localized H I clumps, we therefore conclude that it is fundamentally different from Complex C, with either a lower dust-to-gas ratio or a greater distance from the Galactic disk (and consequently cooler dust temperature). Firm conclusions cannot be drawn for the other two Spitzer-observed CHVCs since their small-scale H I structures are not sufficiently well known; nonetheless, no extended dust emission is apparent despite their relatively high H I column densities. The lack of dust emission in CHVC289 suggests that at least some compact high-velocity clouds objects may exhibit very low dust-to-gas ratios and/or greater Galactocentric distances than large HVC complexes.

79 ASTRONOMY AND ASTROPHYSICS↗

The EXOSS mission for hard X-ray astronomy

The basis for the Energetic X-ray Observatory on Space Station is described. Attention is given to the principal scientific objectives of EXOSS, namely, to study in detail AGN and quasars (some 10,000 should be detectable) as well as compact Galactic sources (accreting white dwarfs, neutron stars, and black holes), and to probe both nonthermal and high-temperature thermal phenomena and the fundamental nature of these objects. The principal technical characteristics of the EXOSS baseline instrument, which overlap in sensitivity in the approximately 40-to-60-keV band, are presented. EXOSS should facilitate efforts to determine: the central power source and the dominant emission mechanisms in AGN, the ways in which the various AGN classes differ as hard X-ray and soft gamma-ray emitters, and the contribution of AGN to the diffuse hard X-ray and soft gamma-ray background.

Grindlay, Jonathan E.↗

Transforming Ordinary Buildings into Smart Buildings via Low-Cost, Self-Powering Wireless Sensors & Sensor Networks

The research objective of this project is to design and demonstrate a low-cost, compact, easy-to-deploy, maintenance-free sensor node technology, and a network of such sensors, which enable the monitoring of multiphysical parameters and can transform today’s ordinary buildings into smart buildings with environmental awareness. We develop the sensor node and network via engineering and integration of existing technologies, including high-efficiency mechanical energy harvesting, and ultralow-power integrated circuits (ICs) for sensing and wireless communication. Through integration and innovative power management via specifically designed low-power control circuits for wireless sensing applications, and tailoring energy-harvesting components to indoor applications, the target products will have smaller volume, higher efficiency, and much lower cost (in both manufacturing and maintenance) than the baseline technology. Our development and commercialization objective is to create prototypes for our target products under the CWRU-Intwine collaboration.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

AI-Enabled Robots for Automated Nondestructive Evaluation and Repair of Power Plant Boilers. Final Report

Boiler failure could cause loss of life and safety issues, cost hundreds of thousands of dollars in equipment repairs, property damage and production losses, and drive up the cost of electric power. Boiler maintenance is challenging and risky for inspectors working on scaffolding in confined hazardous spaces inside of a boiler and sometimes the space is hard to access. The operation is also time-consuming due to the large area of vertical structures for inspection and the tremendous effort needed for scaffolding. Recently, the use of robotics (e.g., drones and crawlers) in power plants for maintenance is growing rapidly. However, the existing robotics solutions show two notable technological gaps: no live repair capability, and no Artificial Intelligence (AI) for smart autonomy. The objective of this project is to develop an integrated autonomous robotic platform that is equipped with compact non-destructive evaluation (NDE) sensors to perform live inspection, operates onboard repair devices to perform live repair, and uses AI for intelligent data fusion and predictive analysis for automated and smart spatiotemporal inspection, analysis and repair of the furnace walls in coal-fired boilers. The approach to achieve the objective includes developing NDE sensors with signal processing techniques, designing and evaluating repair devices for robots based on fusion and solid-state technologies, and an autonomous robotic platform that can attach to and navigate on boiler furnace walls using magnetic drive tracks. The robot is also powered by AI to automate data gathering (e.g., 3D mapping and damage localization) and predictive analysis. This project has advanced the state-of-the-art by providing technological breakthroughs including compact NDE and repair tools for robots, AI capabilities for smart autonomy, and a robotic platform for automated boiler maintenance. This project has great potential to result in significant benefits including limiting or eliminating the need to send operators to assess difficult-to-access or hazardous areas, enabling automated live inspection and repair, avoiding time consuming scaffolding (especially for partial maintenance during unplanned outage), collecting comprehensive and well-organized data smartly, and avoiding or limiting the need for onsite or remote piloting technicians. The impacts can be tremendous in terms of the time and cost savings, reducing the risk for human operators, and increasing boiler reliability, usability, and efficiency. In addition, by developing the new technologies on the autonomous inspection and repair robot, by involving multiple undergraduate and graduate students working together with the faculty members on this project, and by generating knowledge and building up collaborations with industrial partners, this effort will significantly update the education capabilities, support long-term fundamental research, and maintain the leadership of Colorado School of Mines and Michigan State University in energy fields.

20 FOSSIL-FUELED POWER PLANTS↗

FIRST SCIENCE RESULTS FROM SOFIA/FORCAST: THE MID-INFRARED VIEW OF THE COMPACT H II REGION W3A

The massive star-forming region W3 was observed with the faint object infrared camera for the SOFIA telescope as part of the Short Science program. The 6.4, 6.6, 7.7, 19.7, 24.2, 31.5, and 37.1 {mu}m bandpasses were used to observe the emission of polycyclic aromatic hydrocarbon (PAH) molecules, very small grains, and big grains. Optical depth and color temperature maps of W3A show that IRS2 has blown a bubble devoid of gas and dust of {approx}0.05 pc radius. It is embedded in a dusty shell of ionized gas that contributes 40% of the total 24 {mu}m emission of W3A. This dust component is mostly heated by far-ultraviolet, rather than trapped Ly{alpha} photons. This shell is itself surrounded by a thin ({approx}0.01 pc) photodissociation region where PAHs show intense emission. The infrared spectral energy distribution (SED) of three different zones located at 8'', 20'', and 25'' from IRS2 shows that the peak of the SED shifts toward longer wavelengths, when moving away from the star. Adopting the stellar radiation field for these three positions, DUSTEM model fits to these SEDs yield a dust-to-gas mass ratio in the ionized gas similar to that in the diffuse interstellar medium (ISM). However, the ratio of the IR-to-UV opacity of the dust in the ionized shell is increased by a factor of {approx_equal}3 compared to the diffuse ISM.

79 ASTRONOMY AND ASTROPHYSICS↗

EVIDENCE FOR (AND AGAINST) PROGENITOR BIAS IN THE SIZE GROWTH OF COMPACT RED GALAXIES

Most massive, passive galaxies are compact at high redshifts, but similarly compact massive galaxies are rare in the local universe. The most common interpretation of this phenomenon is that massive galaxies have grown in size by a factor of about five since redshift z = 2. An alternative explanation is that recently quenched massive galaxies are larger (a {sup p}rogenitor bias{sup )}. In this paper, we explore the importance of progenitor bias by looking for systematic differences in the stellar populations of compact early-type galaxies in the DEEP2 survey as a function of size. Our analysis is based on applying the statistical technique of bootstrap resampling to constrain differences in the median ages of our samples and to begin to characterize the distribution of stellar populations in our co-added spectra. The light-weighted ages of compact early-type galaxies at redshifts 0.5 < z < 1.4 are compared to those of a control sample of larger galaxies at similar redshifts. We find that massive compact early-type galaxies selected on the basis of red color and high bulge-to-total ratio are younger than similarly selected larger galaxies, suggesting that size growth in these objects is not driven mainly by progenitor bias, and that individual galaxies grow as their stellar populations age. However, compact early-type galaxies selected on the basis of image smoothness and high bulge-to-total ratio are older than a control sample of larger galaxies. Progenitor bias will play a significant role in defining the apparent size changes of early-type galaxies if they are selected on the basis of the smoothness of their light distributions.

79 ASTRONOMY AND ASTROPHYSICS↗

ObstacleSense: Low-Power Neuromorphic Vision for Corridor Obstacle Awareness in Low-Level ADAS

The automotive industry’s pursuit of Level 5 autonomy is constrained by substantial perception-compute power requirements, often reaching 1, 000 + watts in full autonomy stacks. Reducing this energy burden requires rethinking perception not only at the high-end autonomy level, but also at the foundational Advanced Driver Assistance Systems (ADAS) level where low-power, safety-critical sensing can have broad impact. Neuromorphic vision provides a promising starting point: HD Dynamic Vision Sensors (DVS) can operate below 100 mW at the sensor level by reporting only asynchronous brightness changes. However, low-power sensing alone is insufficient if downstream perception reintroduces dense, energy-intensive computation. In particular, many event-driven object-detection pipelines still rely on CNN backbones, while purely spiking alternatives often trade away accuracy or ignore deployment constraints. We introduce ObstacleSense, a highly compact, CNN-free hybrid ANN–SNN framework for Level 0–1 forward-corridor obstacle awareness. Instead of performing full-scene object detection with a convolutional feature backbone, ObstacleSense targets the safety-critical question of whether the ego corridor is occupied and how far the nearest obstacle is. The architecture combines polarity-conditioned event encoding, lightweight temporal spiking dynamics, axial spatial mixing, and coarse-to-fine range estimation within a regular fixed-grid compute pattern. This design avoids the dense CNN backbone commonly used in event-based detection while maintaining a small state footprint suitable for eventual small-FPGA deployment. Before hardware mapping, we evaluate the software implementation using a model-side power proxy derived from MACs, weight and activation traffic, and spiking state updates under shared FP16 assumptions. On simulated CARLA event corpora, the deployment-oriented model achieves 0.9464 objectness F1, 0.9978 grid-level mAP, and 0.8987 m distance Mean Absolute Error at an estimated 1.92 mW proxy cost, while maintaining performance on unseen generalization test sequences.

Johnson-Scott, Zac [ORNL]↗

Conjugate Heat Transfer Analysis of the Supercritical CO2 Based Counter Flow Compact 3D Heat Exchangers

Compact heat exchangers using supercritical fluids such as CO2 are preferred due to their high heat transfer capacity and smaller footprint. Three-dimensional conjugate forced convection heat transfer analysis was performed on several shell-and-tube counter-flow microchannel heat exchangers. Numerical simulations were conducted to test effect of change in mass flow rate, hydraulic diameter and various cross sections on the heat transfer. Increasing mass flow rate improved heat transfer up to a maximum value and then decreased downstream with increasing turbulence. Maximum heat transfer was obtained for the micro channel with the smallest hydraulic diameter. Amongst the cross sections analyzed (circular, square, circular with radial ribs, and square with radial ribs), the most uniform distribution of temperature and maximum heat transfer were obtained for circular cross section with radial ribs. An optimally efficient operation of such a heat exchanger can be attained by considering these factors during multi-objective constrained optimization of geometric parameters and requirements for additive manufacturing of such compact heat exchangers.

Chitale, Janhavi↗