Search NASA⌕ Search

SEARCH · Search NASA

Results for “complex computing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

Validating Performance Models for Hybrid Power Plant Control Assessment

The need for simple, but accurate performance models of wind turbine generators (WTGs), photovoltaic (PV) plants, and battery energy storage systems (BESS) for various hybrid power plant (HPP) studies motivates the present work. Particularly, the development and verification stage of HPP controls requires reduced-order models to minimize the complexity and computation effort of simulation platforms. In this paper, such models are proposed, and the most essential parts of the models are validated through field measurements. The models target power system integration studies involving active and reactive power, as well as frequency and voltage regulation where detailed models, as proposed in the standards, can be cumbersome. Field measurements of two Vestas WTGs, one 1-MW PV plant, and one 1-MW/1-MWh BESS are used for model validation. The results show that the WTG and PV performance models correctly estimate the power generation variability according to fluctuations in wind speed and solar irradiance. The BESS performance model provides satisfactory results related to grid-forming control performance and estimation of state-of-charge. The presented validation work enables using the proposed performance models for power system studies and HPP control design in all model-based design stages, that is, preliminary analysis, design, verification, and validation with a high level of confidence.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Including Dust Coagulation in Hydrodynamic Models of Protoplanetary Disks: Dust Evolution in the Vicinity of a Jupiter-mass Planet

Dust growth is often neglected when building models of protoplanetary disks due to its complexity and computational expense. However, it does play a major role in shaping the evolution of protoplanetary dust and planet formation. In this paper, we present a numerical model coupling 2D hydrodynamic evolution of a protoplanetary disk, including a Jupiter-mass planet, and dust coagulation. This is obtained by including multiple dust fluids in a single grid-based hydrodynamic simulation and solving the Smoluchowski equation for dust coagulation on top of solving for the hydrodynamic evolution. We find that fragmentation of dust aggregates trapped in a pressure bump outside of the planetary gap leads to an enhancement in the density of small grains. Additionally, we compare the results obtained from the full-coagulation treatment to the commonly used, fixed-dust-size approach and to previously applied, less computationally intensive methods for including dust coagulation. We find that the full-coagulation results cannot be reproduced using the fixed-size treatment, but some can be mimicked using a relatively simple method for estimating the characteristic dust size in every grid cell.

79 ASTRONOMY AND ASTROPHYSICS↗

A permafrost implementation in the simple carbon–climate model Hector v.2.3pf

Abstract. Permafrost currently stores more than a fourth of global soil carbon. A warming climate makes this carbon increasingly vulnerable to decomposition and release into the atmosphere in the form of greenhouse gases. The resulting climate feedback can be estimated using land surface models, but the high complexity and computational cost of these models make it challenging to use them for estimating uncertainty, exploring novel scenarios, and coupling with other models. We have added a representation of permafrost to the simple, open-source global carbon–climate model Hector, calibrated to be consistent with both historical data and 21st century Earth system model projections of permafrost thaw. We include permafrost as a separate land carbon pool that becomes available for decomposition into both methane (CH4) and carbon dioxide (CO2) once thawed; the thaw rate is controlled by region-specific air temperature increases from a preindustrial baseline. We found that by 2100 thawed permafrost carbon emissions increased Hector’s atmospheric CO2 concentration by 5 %–7 % and the atmospheric CH4 concentration by 7 %–12 %, depending on the future scenario, resulting in 0.2–0.25 ∘C of additional warming over the 21st century. The fraction of thawed permafrost carbon available for decomposition was the most significant parameter controlling the end-of-century temperature change in the model, explaining around 70 % of the temperature variance, and was distantly followed by the initial stock of permafrost carbon, which contributed to about 10 % of the temperature variance. The addition of permafrost in Hector provides a basis for the exploration of a suite of science questions, as Hector can be cheaply run over a wide range of parameter values to explore uncertainty and can be easily coupled with integrated assessment and other human system models to explore the economic consequences of warming from this feedback.

54 ENVIRONMENTAL SCIENCES↗

Dynamics and Control of Flexible Space Vehicles

The purpose of this report is twofold: (1) to survey the established analytic procedures for the simulation of controlled flexible space vehicles, and (2) to develop in detail methods that employ a combination of discrete and distributed ("modal") coordinates, i.e., the hybrid-coordinate methods. Analytic procedures are described in three categories: (1) discrete-coordinate methods, (2) hybrid-coordinate methods, and (3) vehicle normal-coordinate methods. Each of these approaches is described and analyzed for its advantages and disadvantages, and each is found to have an area of applicability. The hybrid-coordinate method combines the efficiency of the vehicle normal-coordinate method with the versatility of the discrete-coordinate method, and appears to have the widest range of practical application. The results in this report have practical utility in two areas: (1) complex digital computer simulation of flexible space vehicles of arbitrary configuration subject to realistic control laws, and (2) preliminary control system design based on transfer functions for linearized models of dynamics and control laws.

Likins, P. W.↗

Continuous Fourier transform system

Complex digital computer is not required, only summing amplifiers and attenuators are used for transformation of signal. Continuous transform system may be used for spectrum analysis, filtering, transfer function synthesis, and communications.

Munoz, R. M.↗

GC-MS in the analysis of organic compounds in meteorites

The application of an analytical approach combining gas chromatography with mass spectrometry (GC-MS) has shown that the amino acid composition of meteorite extracts is quite complex. A computer was used in the evaluation of the data obtained in the investigations. The computer programs developed have been concerned solely with the mass spectra of amino acids. Specialized programs have been written to determine the number of carbon atoms in an amino acid which is a member of any of three subclasses.

Lawless, J. G.↗

Skylab M518 multipurpose furnace convection analysis

An analysis was performed of the convection which existed on ground tests and during skylab processing of two experiments: vapor growth of IV-VI compounds growth of spherical crystals. A parallel analysis was also performed on Skylab experiment indium antimonide crystals because indium antimonide (InSb) was used and a free surface existed in the tellurium-doped Skylab III sample. In addition, brief analyses were also performed of the microsegregation in germanium experiment because the Skylab crystals indicated turbulent convection effects. Simple dimensional analysis calculations and a more accurate, but complex, convection computer model, were used in the analysis.

Bourgeois, S. V.↗

Analytical comparison of effects of solid-friction and viscous structural damping on panel flutter

A Galerkin modal analysis is presented that accounts for the effects of both solid friction and viscous structural damping on panel flutter, based on unsteady aerodynamic forces from supersonic potential flow. The eigensolutions are made by complex eigenvalue computer routines. Markedly different effects on the flutter boundary of the two types of structural damping are obtained. This result establishes that there is not, in general, an "equivalent viscous" damping for solid-friction damping. For the limiting case of the static-aerodynamic approximation, a substantially different flutter dynamic pressure is obtained for solid friction identically zero compared with solid friction approaching zero as a limit. Use of the quasi-static aerodynamic approximation eliminates that difference.

Cunningham, H. J.↗

FTMP - A highly reliable Fault-Tolerant Multiprocessor for aircraft

The FTMP (Fault-Tolerant Multiprocessor) is a complex multiprocessor computer that employs a form of redundancy related to systems considered by Mathur (1971), in which each major module can substitute for any other module of the same type. Despite the conceptual simplicity of the redundancy form, the implementation has many intricacies owing partly to the low target failure rate, and partly to the difficulty of eliminating single-fault vulnerability. An extensive analysis of the computer through the use of such modeling techniques as Markov processes and combinatorial mathematics shows that for random hard faults the computer can meet its requirements. It is also shown that the maintenance scheduled at intervals of 200 hr or more can be adequate most of the time.

Hopkins, A. L., Jr.↗

Developing new architectures for the Block 2 VLBI correlator system

The overall LSI (large-scale integrated circuits) architecture design and current status of the VBLI (very long baseline interferometry) block 2 correlator is addressed. The VBLI correlator algorithms demand a computing system that provides a throughput of hundreds of millions of instructions per second to perform cross-correlation detection for six baselines. The LSI technology lights the way for the computation of complex parallel process and is raising the upper bound of computerization.

Peterson, J. C.↗

Nonlinear Green's function method for unsteady transonic flows

Advantages to employing Green's function in describing unsteady three-dimensional transonic flows are explored. The development of the function for application to linear subsonic and supersonic unsteady aerodynamics is reviewed. It is shown that unique solutions are possible for external flows, with all functional expressions being defined in Prandtl-Glauert space. The development of methods of using the Green's function for transonic flows is traced, noting the necessity of including the effects of significant nonlinear terms. The steady-state problem is considered to demonstrate the shock-capturing ability of the method and the usefulness of the function in the incompressible, subsonic, transonic, and supersonic areas of potential unsteady three-dimensional flows around complex configurations. Computational time is asserted to be an order of magnitude less than with finite difference methods.

Tseng, K.↗

Turbulent heat transfer in a channel with two right-angled bends

A numerical study is reported on the flow and heat transfer in a channel with two right-angled bends. The k-epsilon turbulence model with a refined near-wall model is adopted for the computation of the flow field for step ratios ranging H/W = 1-4 and for Reynolds numbers Re = 3,000-10,000. The solution method of the governing transport equations is based on the modified hybrid scheme which produces very small truncation error. As a result of extensive computations, the complex flow patterns in the channel with two bends are clarified and the mechanisms of heat transfer are explained relating to the flow behaviors of separation, deflection, recirculation, and reattachment.

Amano, R. S.↗

Automated distribution system management for multichannel space power systems

A NASA sponsored study of space power distribution system technology is in progress to develop an autonomously managed power system (AMPS) for large space power platforms. The multichannel, multikilowatt, utility-type power subsystem proposed presents new survivability requirements and increased subsystem complexity. The computer controls under development for the power management system must optimize the power subsystem performance and minimize the life cycle cost of the platform. A distribution system management philosophy has been formulated which incorporates these constraints. Its implementation using a TI9900 microprocessor and FORTH as the programming language is presented. The approach offers a novel solution to the perplexing problem of determining the optimal combination of loads which should be connected to each power channel for a versatile electrical distribution concept.

Fleck, G. W.↗

Three-dimensional elliptic grid generation about fighter aircraft for zonal finite-difference computations

An elliptic grid-generation method for finite-difference computations about complex aerodynamic configurations is developed. A zonal approach is used, which involves first making a coarse global grid filling the entire physical domain and then subdividing regions of that grid to make the individual zone grids. The details of the grid-generation method are presented along with results of the present application, a wing-body configuration based on the F-16 fighter aircraft.

Sorenson, R. L.↗

Turbulence modeling

Recent developments at several levels of statistical turbulence modeling applicable to aerodynamics are briefly surveyed. Emphasis is on examples of model improvements for transonic, two-dimensional flows. Experience with the development of these improved models is cited to suggest methods of accelerating the modeling process necessary to keep abreast of the rapid movement of computational fluid dynamics into the computation of complex three-dimensional flows.

Rubesin, Morris W.↗

Generating fractal-like surfaces on general purpose mesh-connected computers

Realistic images of natural surfaces are often generated using computationally expensive stochastic modeling techniques. Here a parallel procedure to generate such models is presented. The target machines are general-purpose mesh-connected computers. The complexity of the procedure is similar to that of a proposed special-purpose parallel fractal generator.

Wainer, Michael↗