Search NASA⌕ Search

SEARCH · Search NASA

Results for “extrapolation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

STUDY OF TWO SUCCESSIVE THREE-RIBBON SOLAR FLARES ON 2012 JULY 6

This Letter reports two rarely observed three-ribbon flares (M1.9 and C9.2) on 2012 July 6 in NOAA AR 11515, which we found using Hα observations of 0.''1 resolution from the New Solar Telescope and Ca II H images from Hinode. The flaring site is characterized by an intriguing ''fish-bone-like'' morphology evidenced by both Hα images and a nonlinear force-free field (NLFFF) extrapolation, where two semi-parallel rows of low-lying, sheared loops connect an elongated, parasitic negative field with the sandwiching positive fields. The NLFFF model also shows that the two rows of loops are asymmetric in height and have opposite twists, and are enveloped by large-scale field lines including open fields. The two flares occurred in succession within half an hour and are located at the two ends of the flaring region. The three ribbons of each flare run parallel to the magnetic polarity inversion line, with the outer two lying in the positive field and the central one in the negative field. Both flares show surge-like flows in Hα apparently toward the remote region, while the C9.2 flare is also accompanied by EUV jets possibly along the open field lines. Interestingly, the 12-25 keV hard X-ray sources of the C9.2 flare first line up with the central ribbon then shift to concentrate on the top of the higher branch of loops. These results are discussed in favor of reconnection along the coronal null line, producing the three flare ribbons and the associated ejections.

79 ASTRONOMY AND ASTROPHYSICS↗

VALIDATING SOLAR WIND PREDICTION USING THE CURRENT SHEET SOURCE SURFACE MODEL

We have carried out a comparative study of the predicted solar wind based on the flux tube expansion factor computed using the current sheet source surface (CSSS) model and the potential field source surface (PFSS) model, with the aim of determining whether the CSSS model represents the solar wind sources better than the PFSS model. For this, we obtained the root mean square errors (RMSEs) and the correlation coefficients between the observed solar wind speed and that predicted by the models, the ratio of RMSEs between the two models, and a skill score. On average, the CSSS predictions are more accurate than the PFSS predictions by a factor of 1.6, taking RMSE as the metric of accuracy. The RMSEs increased as the solar cycle progressed toward maximum, indicating the difficulty in modeling the corona as the global field becomes more complex. We also compared the WSA/ENLIL predictions for a few Carrington rotations; the Wang-Sheeley-Arge (WSA) model makes use of the PFSS extrapolations to model the wind source. We found that the average value of RMSE ratio between the CSSS and the WSA/ENLIL predictions was about 1.9, implying that the CSSS predictions are nearly twice better than the WSA/ENLIL predictions, despite the simplicity of the CSSS model compared to ENLIL. We conclude, based on the present analysis, that the CSSS model is a valid proxy for solar wind measurements and that it improves upon existing commonly used methods of wind prediction or proxy analysis.

79 ASTRONOMY AND ASTROPHYSICS↗

EVIDENCE OF VERY LOW METALLICITY AND HIGH IONIZATION STATE IN A STRONGLY LENSED, STAR-FORMING DWARF GALAXY AT z = 3.417

We investigate the gas-phase metallicity and Lyman continuum (LyC) escape fraction of a strongly gravitationally lensed, extreme emission-line galaxy at z = 3.417, J1000+0221S, recently discovered by the CANDELS team. We derive ionization- and metallicity-sensitive emission-line ratios from H+K band Large Binocular Telescope (LBT)/LUCI medium resolution spectroscopy. J1000+0221S shows high ionization conditions, as evidenced by its enhanced [O III]/[O II] and [O III]/Hβ ratios. Strong-line methods based on the available line ratios suggest that J1000+0221S is an extremely metal-poor galaxy, with a metallicity of 12+log (O/H) < 7.44 (Z < 0.05 Z {sub ☉}), placing it among the most metal-poor star-forming galaxies at z ≳ 3 discovered so far. In combination with its low stellar mass (2 × 10{sup 8} M {sub ☉}) and high star formation rate (5 M {sub ☉} yr{sup –1}), the metallicity of J1000+0221S is consistent with the extrapolation of the mass-metallicity relation traced by Lyman-break galaxies at z ≳ 3 to low masses, but it is 0.55 dex lower than predicted by the fundamental metallicity relation at z ≲ 2.5. These observations suggest a rapidly growing galaxy, possibly fed by massive accretion of pristine gas. Additionally, deep LBT/LBC photometry in the UGR bands are used to derive a limit to the LyC escape fraction, thus allowing us to explore for the first time the regime of sub-L* galaxies at z > 3. We find a 1σ upper limit to the escape fraction of 23%, which adds a new observational constraint to recent theoretical models predicting that sub-L* galaxies at high-z have high escape fractions and thus are the responsible for the reionization of the universe.

79 ASTRONOMY AND ASTROPHYSICS↗

GROUND LEVEL ENHANCEMENT IN THE 2014 JANUARY 6 SOLAR ENERGETIC PARTICLE EVENT

We present a study of the 2014 January 6 solar energetic particle event which produced a small ground level enhancement (GLE), making it the second GLE of this unusual solar cycle 24. This event was primarily observed by the South Pole neutron monitors (increase of ∼2.5%) while a few other neutron monitors recorded smaller increases. The associated coronal mass ejection (CME) originated behind the western limb and had a speed of 1960 km s{sup –1}. The height of the CME at the start of the associated metric type II radio burst, which indicates the formation of a strong shock, was measured to be 1.61 Rs using a direct image from STEREO-A/EUVI. The CME height at the time of the GLE particle release (determined using the South Pole neutron monitor data) was directly measured as 2.96 Rs based on STEREO-A/COR1 white-light observations. These CME heights are consistent with those obtained for GLE71, the only other GLE of the current cycle, as well as cycle-23 GLEs derived using back-extrapolation. GLE72 is of special interest because it is one of only two GLEs of cycle 24, one of two behind-the-limb GLEs, and one of the two smallest GLEs of cycles 23 and 24.

79 ASTRONOMY AND ASTROPHYSICS↗

STAR FORMATION AT 4 < z < 6 FROM THE SPITZER LARGE AREA SURVEY WITH HYPER-SUPRIME-CAM (SPLASH)

Using the first 50% of data collected for the Spitzer Large Area Survey with Hyper-Suprime-Cam observations on the 1.8 deg{sup 2} Cosmological Evolution Survey we estimate the masses and star formation rates of 3398 M {sub *} > 10{sup 10} M {sub ☉} star-forming galaxies at 4 < z < 6 with a substantial population up to M {sub *} ≳ 10{sup 11.5} M {sub ☉}. We find that the strong correlation between stellar mass and star formation rate seen at lower redshift (the ''main sequence'' of star-forming galaxies) extends to z ∼ 6. The observed relation and scatter is consistent with a continued increase in star formation rate at fixed mass in line with extrapolations from lower-redshift observations. It is difficult to explain this continued correlation, especially for the most massive systems, unless the most massive galaxies are forming stars near their Eddington-limited rate from their first collapse. Furthermore, we find no evidence for moderate quenching at higher masses, indicating quenching either has not occurred prior to z ∼ 6 or else occurs rapidly, so that few galaxies are visible in transition between star-forming and quenched.

79 ASTRONOMY AND ASTROPHYSICS↗

Watch and learn—a generalized approach for transferrable learning in deep neural networks via physical principles

Transfer learning refers to the use of knowledge gained while solving a machine learning task and applying it to the solution of a closely related problem. Such an approach has enabled scientific breakthroughs in computer vision and natural language processing where the weights learned in state-of-the-art models can be used to initialize models for other tasks which dramatically improve their performance and save computational time. Here we demonstrate an unsupervised learning approach augmented with basic physical principles that achieves fully transferrable learning for problems in statistical physics across different physical regimes. By coupling a sequence model based on a recurrent neural network to an extensive deep neural network, we are able to learn the equilibrium probability distributions and inter-particle interaction models of classical statistical mechanical systems. Our approach, distribution-consistent learning, DCL, is a general strategy that works for a variety of canonical statistical mechanical models (Ising and Potts) as well as disordered interaction potentials. Using data collected from a single set of observation conditions, DCL successfully extrapolates across all temperatures, thermodynamic phases, and can be applied to different length-scales. This constitutes a fully transferrable physics-based learning in a generalizable approach.

97 MATHEMATICS AND COMPUTING↗

Two-loop self-energy for the ground state of medium-Z hydrogenlike ions

The two-loop self-energy correction to the ground-state Lamb shift is calculated for hydrogenlike ions with the nuclear charge Z=10-30 without any expansion in the binding field of the nucleus. A calculational technique is reported for treatment of Feynman diagrams in the mixed coordinate-momentum representation, which yields significant improvement in numerical accuracy as compared to previous results. An extrapolation of the all-order numerical data yields a result for the higher-order remainder function for hydrogen. The previously reported disagreement between the all-order and the perturbative approaches is reduced to the marginal agreement.

74 ATOMIC AND MOLECULAR PHYSICS↗

Analytical solution of thermal magnetization on memory stabilizer structures

We return to the question of how the choice of stabilizer generators affects the preservation of information on structures whose degenerate ground state encodes a classical redundancy code. Controlled-not gates are used to transform the stabilizer Hamiltonian into a Hamiltonian consisting of uncoupled single spins and/or pairs of spins. This transformation allows us to obtain an analytical partition function and derive closed-form equations for the relative magnetization and susceptibility. These equations are in agreement with the numerical results presented in Viteri et al. [Phys. Rev. A 80, 042313 (2009)] for finite size systems. Analytical solutions show that there is no finite critical temperature, T{sub c}=0, for all of the memory structures in the thermodynamic limit. This is in contrast to the previously predicted finite critical temperatures based on extrapolation. The mismatch is a result of the infinite system being a poor approximation even for astronomically large finite-size systems, where spontaneous magnetization still arises below an apparent finite critical temperature. We extend our analysis to the canonical stabilizer Hamiltonian. Interestingly, Hamiltonians with two-body interactions have a higher apparent critical temperature than the many-body Hamiltonian.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electron-impact-ionization cross sections for excited states of B{sup q+} (q=0-2) and an investigation into n scaling of ionization cross sections

Nonperturbative R-matrix-with-pseudostates (RMPS) and time-dependent close-coupling (TDCC) methods are used to determine electron-impact-ionization cross sections for the excited states of B, B{sup +}, and B{sup 2+}. RMPS calculated cross sections are presented for the 1s{sup 2}2s{sup 2}3l and 1s{sup 2}2s{sup 2}4l configurations of B, the 1s{sup 2}2s3l and 1s{sup 2}2s4l configurations of B{sup +}, and the 1s{sup 2}3l, 1s{sup 2}4l, and 1s{sup 2}5l configurations of B{sup 2+}. It is shown that the TDCC-calculated cross sections for the 1s{sup 2}2s{sup 2}3s configuration of B, the 1s{sup 2}2s3s configuration of B{sup +}, and the 1s{sup 2}3s configuration of B{sup 2+} are in reasonable agreement with the RMPS results. Furthermore, n scaling of these nonperturbative cross sections is investigated and a scheme proposed to allow for the extrapolation of electron-impact-ionization cross sections to higher n shells. Two semiempirical ionization cross-section expressions are fitted to the peak of the highest n-bundled RMPS cross sections for B, B{sup +}, and B{sup 2+}. These are subsequently used for accurate evaluation of the higher n-shell ionization cross sections needed to obtain temperature- and density-dependent generalized collisional-radiative ionization coefficients for the impurity and transport modeling of magnetic fusion plasmas.

74 ATOMIC AND MOLECULAR PHYSICS↗

Nuclear-size correction to the Lamb shift of one-electron atoms

The nuclear-size effect on the one-loop self-energy and vacuum polarization is evaluated for the 1s, 2s, 3s, 2p{sub 1/2}, and 2p{sub 3/2} states of hydrogen-like ions. The calculation is performed to all orders in the nuclear binding strength parameter Z{alpha}. Detailed comparison is made with previous all-order calculations and calculations based on the expansion in the parameter Z{alpha}. Extrapolation of the all-order numerical results obtained toward Z=1 provides results for the radiative nuclear-size effect on the hydrogen Lamb shift.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Making precise predictions of the Casimir force between metallic plates via a weighted Kramers-Kronig transform

The possibility of making precise predictions for the Casimir force is essential for the theoretical interpretation of current precision experiments on the thermal Casimir effect with metallic plates, especially for submicron separations. For this purpose it is necessary to estimate very accurately the dielectric function of a conductor along the imaginary frequency axis. This task is complicated in the case of ohmic conductors because optical data do not usually extend to sufficiently low frequencies to permit an accurate evaluation of the standard Kramers-Kronig integral used to compute {epsilon}(i{xi}). By making important improvements to the results of a previous paper by the author, it is shown that this difficulty can be resolved by considering suitable weighted dispersion relations, which strongly suppress the contribution of low frequencies. The weighted dispersion formulas presented in this paper permit us to estimate accurately the dielectric function of ohmic conductors for imaginary frequencies, on the basis of optical data extending from the IR to the UV, with no need for uncontrolled data extrapolations toward zero frequency that are necessary with standard Kramers-Kronig relations. Applications to several sets of data for gold films are presented to demonstrate the viability of the dispersion formulas presented in this paper.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Extended scaling behavior of the spatially anisotropic classical XY model in the crossover from three to two dimensions

The bivariate high-temperature expansion of the spin-spin correlation function of the three-dimensional classical XY (planar rotator) model, with spatially anisotropic nearest-neighbor couplings, is extended from the tenth through the 21st order. The computation is carried out for the simple cubic lattice, in the absence of magnetic field, in the case in which the coupling strength along the z axis of the lattice is different from those along the x and the y axes. It is then possible to determine accurately the critical temperature as function of the parameter R which characterizes the coupling anisotropy and to check numerically the universality, with respect to R, of the critical exponents of the three-dimensional anisotropic system. The analysis of our data also shows that the main predictions of the generalized scaling theory for the crossover from the three-dimensional to the two-dimensional critical behavior are compatible with the series extrapolations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Neutron capture cross sections of {sup 184}W and {sup 186}W

The neutron capture cross sections of {sup 184}W and {sup 186}W have been determined by means of the activation technique. The measurements were carried out at the Karlsruhe 3.75-MV Van de Graaff accelerator using the {sup 7}Li(p,n){sup 7}Be reaction for neutron production. Samples of natural composition were irradiated in a quasistellar neutron spectrum for a thermal energy of kT=25 keV. Systematic uncertainties were investigated by variation of the experimental parameters in repeated activations. The induced activities were counted with HPGe detectors via the strongest {gamma}-ray lines in the decay of the respective product nuclei. The measured data were converted into Maxwellian averaged cross sections at kT=30 keV, yielding 221{+-}12 mb and 231{+-}11 mb for {sup 184}W and {sup 186}W, respectively. Together with the result of a previously reported measurement on {sup 180}W, the present values can be used to improve the cross-section trend with neutron number, which is important for extrapolation into the regions of unstable isotopes. These results are of interest for stellar and explosive nucleosynthesis in nuclear astrophysics as well as for technological applications.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Lattice study of K{pi} scattering in I=3/2 and 1/2 channels

We report the first lattice QCD results of the scattering amplitudes of the K{pi} system for I=1/2 channel together with the I=3/2 case. We investigate all quark diagrams contributing to these isospin states, and find that the scattering amplitudes are expressed as combinations of only three diagrams after setting the masses of u-quark and d-quark to be the same. The lattice simulations are performed in the quenched approximation at {beta}=2.23 on a 12{sup 3}x24 lattice with an improved Iwasaki gauge action. We employ a new dilution-type noise method to get an accuracy of data with reasonable CPU time. A simple method is proposed and applied to eliminate lattice artefact due to the finite extent of the lattice along the time direction. A clear difference in the quark mass dependence between the I=3/2 and I=1/2 channels is observed. Although the chiral extrapolation is subtle, we assume E{sub K{pi}}{sup 2}{proportional_to}m{sub u,d}{sup 2}, and obtain the S-wave scattering lengths as a{sub 0}(I=3/2)m{sub {pi}}=-0.084{sub -0.064}{sup +0.051} and a{sub 0}(I=1/2)m{sub {pi}}=-0.625{+-}0.012. We show all necessary formulas which make the calculation possible. We argue that {lambda}N is the most appropriate target of Luescher's formula for the baryonic system because it has no {pi} exchange diagrams and has a scattering length suitable for a lattice QCD simulation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Statistical ensembles with finite bath: A description for an event generator

A Monte Carlo event generator has been developed assuming thermal production of hadrons. The system under consideration is sampled grand canonically in the Boltzmann approximation. A reweighting scheme is then introduced to account for conservation of charges (baryon number, strangeness, electric charge) and energy and momentum, effectively allowing for extrapolation of grand canonical results to the microcanonical limit. This method has two strong advantages compared to analytical approaches and standard microcanonical Monte Carlo techniques in that it is capable of handling resonance decays as well as (very) large system sizes.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Comparison of large-angle production of charged pions with incident protons on cylindrical long and short targets

The HARP Collaboration has presented measurements of the double-differential {pi}{sup {+-}} production cross section in the range of momentum 100 MeV/c{<=}p{<=}800 MeV/c and angle 0.35 rad{<=}{theta}{<=}2.15 rad with proton beams hitting thin nuclear targets. In many applications the extrapolation to long targets is necessary. In this article the analysis of data taken with long (one interaction length) solid cylindrical targets made of carbon, tantalum, and lead is presented. The data were taken with the large-acceptance HARP detector in the T9 beam line of the CERN proton synchrotron. The secondary pions were produced by beams of protons with momenta of 5, 8, and 12GeV/c. The tracking and identification of the produced particles were performed using a small-radius cylindrical time projection chamber placed inside a solenoidal magnet. Incident protons were identified by an elaborate system of beam detectors. Results are obtained for the double-differential yields per target nucleon d{sup 2}{sigma}/dpd{theta}. The measurements are compared with predictions of the MARS and GEANT4 Monte Carlo simulations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Ab initio nuclear structure simulations: The speculative {sup 14}F nucleus

We present results from ab initio no-core full configuration simulations of the exotic proton-rich nucleus {sup 14}F, whose first experimental observation is expected soon. Calculations with the JISP16 NN interaction are performed up to the N{sub max}=8 basis space. The binding energy is evaluated using an extrapolation technique. This technique is generalized to excitation energies, verified in calculations of {sup 6}Li, and applied to {sup 14}F and {sup 14}B, the {sup 14}F mirror, for which some data are available.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗