Search NASA⌕ Search

SEARCH · Search NASA

Results for “formative process”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

Effect of low energy ion irradiation on CdTe crystals: Luminescence enhancement

In this work we show that low energy ion sputtering is a very efficient technique as a cleaning process for CdTe substrates. We demonstrate, by using several techniques like grazing-angle x-ray diffraction, cathodoluminescence, microluminescence, and micro-Raman spectroscopy that the luminescent properties of CdTe substrates can be very much increased when CdTe surfaces are irradiated with low energy Argon ions. We postulate that this enhancement is mainly due to the removal of surface damage induced by the cutting and polishing processes. The formation of a low density of nonluminescent aggregates after the sputtering process has also been observed.

36 MATERIALS SCIENCE↗

FILAMENTARY STAR FORMATION: OBSERVING THE EVOLUTION TOWARD FLATTENED ENVELOPES

Filamentary structures are ubiquitous from large-scale molecular clouds (a few parsecs) to small-scale circumstellar envelopes around Class 0 sources ({approx}1000 AU to {approx}0.1 pc). In particular, recent observations with the Herschel Space Observatory emphasize the importance of large-scale filaments (a few parsecs) and star formation. The small-scale flattened envelopes around Class 0 sources are reminiscent of the large-scale filaments. We propose an observationally derived scenario for filamentary star formation that describes the evolution of filaments as part of the process for formation of cores and circumstellar envelopes. If such a scenario is correct, small-scale filamentary structures (0.1 pc in length) with higher densities embedded in starless cores should exist, although to date almost all the interferometers have failed to observe such structures. We perform synthetic observations of filaments at the prestellar stage by modeling the known Class 0 flattened envelope in L1157 using both the Combined Array for Research in Millimeter-wave Astronomy (CARMA) and the Atacama Large Millimeter/Submillimeter Array (ALMA). We show that with reasonable estimates for the column density through the flattened envelope, the CARMA D array at 3 mm wavelengths is not able to detect such filamentary structure, so previous studies would not have detected them. However, the substructures may be detected with the CARMA D+E array at 3 mm and the CARMA E array at 1 mm as a result of more appropriate resolution and sensitivity. ALMA is also capable of detecting the substructures and showing the structures in detail compared to the CARMA results with its unprecedented sensitivity. Such detection will confirm the new proposed paradigm of non-spherical star formation.

79 ASTRONOMY AND ASTROPHYSICS↗

Methods of making transportation fuel

A method for producing alkylated hydrocarbons is disclosed. Formation fluid is produced from a subsurface in situ heat treatment process. The formation fluid is separated to produce a liquid stream and a first gas stream. The first gas stream includes olefins. The liquid stream is fractionated to produce at least a second gas stream including hydrocarbons having a carbon number of at least 3. The first gas stream and the second gas stream are introduced into an alkylation unit to produce alkylated hydrocarbons. At least a portion of the olefins in the first gas stream enhance alkylation. The alkylated hydrocarbons may be blended with one or more components to produce transportation fuel.

10 SYNTHETIC FUELS↗

Methods of cracking a crude product to produce additional crude products

A method for producing a crude product is disclosed. Formation fluid is produced from a subsurface in situ heat treatment process. The formation fluid is separated to produce a liquid stream and a first gas stream. The first gas stream includes olefins. The liquid stream is fractionated to produce one or more crude products. At least one of the crude products has a boiling range distribution from 38.degree. C. and 343.degree. C. as determined by ASTM Method D5307. The crude product having the boiling range distribution from 38.degree. C. and 343.degree. C. is catalytically cracked to produce one or more additional crude products. At least one of the additional crude products is a second gas stream. The second gas stream has a boiling point of at most 38.degree. C. at 0.101 MPa.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development of a carbon formation reactor for carbon dioxide reduction

Applied research, engineering development, and performance evaluation were conducted on a process for formation of dense carbon by pyrolysis of methane. Experimental research showed that dense (0.7 to 1.6 g/cc bulk density and 1.6 to 2.2 g/cc solid density) carbon can be produced by methane pyrolysis in quartzwool-packed quartz tubes at temperatrues of 1100 to 1300 C. This result supports the condensation theory of pyrolytic carbon formation from gaseous hydrocarbons. A full-scale Breadboard Carbon Formation Reactor (CFR) was designed, fabricated, and tested at 1100 to 1200 C with 380 to 2280 sccm input flows of methane. Single-pass conversion of methane to carbon ranged from 60 to 100 percent, with 89 percent average conversion. Performance was projected for an Advanced Carbon Reactor Subsystem (ACRS) which indicated that the ACRS is a viable option for management of metabolic carbon on long-duration space missions.

Noyes, G.↗

COCOMO2: A Coarse-Grained Model for Interacting Folded and Disordered Proteins

Biomolecular interactions are essential in many biological processes, including complex formation and phase separation processes. Coarse-grained computational models are especially valuable for studying such processes via simulation. Here, we present COCOMO2, an updated residue-based coarse-grained model that extends its applicability from intrinsically disordered peptides to folded proteins. This is accomplished with the introduction of a surface exposure scaling factor, which adjusts interaction strengths based on solvent accessibility, to enable the more realistic modeling of interactions involving folded domains without additional computational costs. COCOMO2 was parametrized directly with solubility and phase separation data to improve its performance on predicting concentration-dependent phase separation for a broader range of biomolecular systems compared to the original version. COCOMO2 enables new applications including the study of condensates that involve IDPs together with folded domains and the study of complex assembly processes. COCOMO2 also provides an expanded foundation for the development of multiscale approaches for modeling biomolecular interactions that span from residue-level to atomistic resolution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Correction to “COCOMO2: A Coarse-Grained Model for Interacting Folded and Disordered Proteins”

Biomolecular interactions are essential in many biological processes, including complex formation and phase separation processes. Coarse-grained computational models are especially valuable for studying such processes via simulation. Here, we present COCOMO2, an updated residue-based coarse-grained model that extends its applicability from intrinsically disordered peptides to folded proteins. This is accomplished with the introduction of a surface exposure scaling factor, which adjusts interaction strengths based on solvent accessibility, to enable the more realistic modeling of interactions involving folded domains without additional computational costs. COCOMO2 was parametrized directly with solubility and phase separation data to improve its performance on predicting concentration-dependent phase separation for a broader range of biomolecular systems compared to the original version. COCOMO2 enables new applications including the study of condensates that involve IDPs together with folded domains and the study of complex assembly processes. COCOMO2 also provides an expanded foundation for the development of multiscale approaches for modeling biomolecular interactions that span from residue-level to atomistic resolution.

Molecular interactions↗

3D turbulent reconnection: Theory, tests, and astrophysical implications

Magnetic reconnection, topological changes in magnetic fields, is a fundamental process in magnetized plasmas. It is associated with energy release in regions of magnetic field annihilation, but this is only one facet of this process. Astrophysical fluid flows normally have very large Reynolds numbers and are expected to be turbulent, in agreement with observations. In strong turbulence, magnetic field lines constantly reconnect everywhere and on all scales, thus making magnetic reconnection an intrinsic part of the turbulent cascade. We note in particular that this is inconsistent with the usual practice of magnetic field lines as persistent dynamical elements. A number of theoretical, numerical, and observational studies starting with the paper done by Lazarian and Vishniac [Astrophys. J. 517, 700–718 (1999)] proposed that 3D turbulence makes magnetic reconnection fast and that magnetic reconnection and turbulence are intrinsically connected. In particular, we discuss the dramatic violation of the textbook concept of magnetic flux-freezing in the presence of turbulence. We demonstrate that in the presence of turbulence, the plasma effects are subdominant to turbulence as far as the magnetic reconnection is concerned. The latter fact justifies a magnetohydrodynamiclike treatment of magnetic reconnection on all scales much larger than the relevant plasma scales. We discuss the numerical and observational evidence supporting the turbulent reconnection model. In particular, we demonstrate that the tearing reconnection is suppressed in 3D, and unlike the 2D settings, 3D reconnection induces turbulence that makes magnetic reconnection independent of resistivity. We show that turbulent reconnection dramatically affects key astrophysical processes, e.g., star formation, turbulent dynamo, and acceleration of cosmic rays. We provide criticism of the concept of “reconnection-mediated turbulence” and explain why turbulent reconnection is very different from enhanced turbulent resistivity and hyper-resistivity and why the latter have fatal conceptual flaws.

79 ASTRONOMY AND ASTROPHYSICS↗

Description of quasifission reactions in the dinuclear system model

The formation and evolution of dinuclear systems in quasifission reactions are investigated. The process of formation of reaction products is analyzed based on the concept of a dinuclear system. Isotopic trends of cross sections of production of superheavy nuclei in quasifission reactions are discussed. The yields of new neutron-rich isotopes of nuclei with Z = 64–80 in quasifission reactions are predicted. The mechanism of production of complex fragments in complete fusion and quasifission reactions is analyzed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Treatment of Tilted Sonar Data for Salt Cavern Analysis

Structural modeling and visualization of salt caverns requires three-dimensional representations. These representations are typically produced from sonar surveys conducted by companies that then produce a report of depths, distances, and volumes. There are multiple formats that are vendor dependent, and, as technology improves, there have been changes from only horizontal surveys to inclined shots for ceilings and floors to mid-cavern inclined shots. For geomechanical modeling, leaching predictions, and cavern stability visualizations, Sandia has previously written in-house software, called SONAR8, that created a consistent geometry format from the processed sonar reports. However, the increase in the need for mid-cavern inclined surveys led to the discovery of certain limitations in that code. This report describes methods used to process the multiple different formats to handle inclined shots in a consistent and accurate manner in our modeling efforts. A set of file formats and a database schema that was developed for this work is also documented in the appendices.

02 PETROLEUM↗

Primeval galaxies and cold dark matter

In the context of the cold dark matter theory for the large-scale matter distribution, the onset of galaxy formation is a gradual process, with star formation being initiated at z = about 10 and reaching a peak for luminous galaxies at z = about 1. The mass function of galaxy cores matches the observed quasar luminosity function at z = 2-3. Primeval galaxies are envisaged as a collection of many interacting and merging clumps, attaining a peak luminosity that is an order of magnitude below that achieved in models in which galaxy formation is initiated abruptly. Hence, ongoing searches for primeval galaxies would not necessarily have been successful unless they are designed to find moderately low-luminosity, low-surface-brigtness extended objects at low redshift.

Silk, Joseph↗

Prototype architecture for a VLSI level zero processing system

The prototype architecture and implementation of a high-speed level zero processing (LZP) system are discussed. Due to the new processing algorithm and VLSI technology, the prototype LZP system features compact size, low cost, high processing throughput, and easy maintainability and increased reliability. Though extensive control functions have been done by hardware, the programmability of processing tasks makes it possible to adapt the system to different data formats and processing requirements. It is noted that the LZP system can handle up to 8 virtual channels and 24 sources with combined data volume of 15 Gbytes per orbit. For greater demands, multiple LZP systems can be configured in parallel, each called a processing channel and assigned a subset of virtual channels. The telemetry data stream will be steered into different processing channels in accordance with their virtual channel IDs. This super system can cope with a virtually unlimited number of virtual channels and sources. In the near future, it is expected that new disk farms with data rate exceeding 150 Mbps will be available from commercial vendors due to the advance in disk drive technology.

Shi, Jianfei↗

The Cloud Absorption Radiometer HDF Data User's Guide

The purpose of this document is to describe the Cloud Absorption Radiometer (CAR) Instrument, methods used in the CAR Hierarchical Data Format (HDF) data processing, the structure and format of the CAR HDF data files, and methods for accessing the data. Examples of CAR applications and their results are also presented. The CAR instrument is a multiwavelength scanning radiometer that measures the angular distributions of scattered radiation.

Li, Jason Y.↗

Ground-Based Centimeter, Millimeter, and Submillimeter Observations of Comet 103P/Hartley 2

Comets provide important clues to the physical and chemical processes that occurred during the formation and early evolution of the Solar System, and could also have been important for initiating prebiotic chemistry on the early Earth [1]. Comets are comprised of molecular ices, that may be pristine interstellar remnants of Solar System formation, along with high-temperature crystalline silicate dust that is indicative of a more thermally varied history in the protosolar nebula [2]. Comparing abundances of cometary parent volatiles, and isotopic fractionation ratios, to those found in the interstellar medium, in disks around young stars, and between cometary families, is vital to understanding planetary system formation and the processing history experienced by organic matter in the so-called interstellar-comet connection [3]. We have conducted observations, at primarily millimeter and submillimeter wavelengths, where molecular emission is easily resolved, towards comets to determine important cosmogonic quantities, such as the ortl1o:pal'a ratio and isotope ratios, as well as probe the origin of cometary organics. Comets provide important clues to the processes that occurred during the formation and early evolution of the Solar System. Past observations, as well as laboratory measurements of cometary material obtained from Stardust, have shown that comets appear to contain a mixture of the products from both interstellar and nebular chemistries. A major observational challenge in cometary science is to quantify the extent to which chemical compounds can be linked to either reservoir.

Milam, S. N.↗

On formation of the asymptotic spectrum of delayed neutron emitters in measuring the VVER-1000 scram system effectiveness

The process of formation of an asymptotic distribution of the neutron flux density in the reactor systems after introducing different negative reactivities is considered. The impact of two factors after the reactivity introduction is evaluated: (1) nonuniformity of perturbation of core properties, on one hand, and (2) a sharp reduction in the density of prompt neutrons, which prevents the appearance of new delayed neutron emitters distributed in accordance with the “new” prompt neutron distribution, on the other hand. The results of calculations show that the errors of measuring the scram system effectiveness using the method of inverse solution of the kinetics equation are caused by the fact that, after the negative reactivity insertion, the sources of prompt and delayed neutrons have different spatial distributions. In the case of high negative reactivities, this difference remains while the system still has neutrons, which can be measured.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Analysis of growth kinetics and impact of NH{sub 3} on the morphology evolution of hexagonal-prism shaped Y{sub 4}O(OH){sub 9}NO{sub 3}/Y{sub 2}O{sub 3} single crystals

Highlights: • Tailored the morphology of Y{sub 4}O(OH){sub 9}NO{sub 3}and Y{sub 2}O{sub 3} crystals using different electrolytes by hydrothermal method. • Role of NH{sub 3} in the formation of hexagonal prism like morphology. • Time dependent experiments to study the growth process and formation of hexagonal prisms. - Abstract: The effect of NH{sub 3} on the morphology evolution of single crystalline hexagonal-prism like Y{sub 4}O(OH){sub 9}NO{sub 3} and Y{sub 2}O{sub 3} has been systematically investigated, as a function of reaction time, by using a combination of powder X-ray diffraction (XRD) and scanning electron microscopy (SEM). Rational control over the morphology has been achieved by the choice of suitable electrolytes like NaNO{sub 3}, KNO{sub 3}, NH{sub 4}NO{sub 3}, KCl and NH{sub 4}Cl in the presence of NH{sub 4}OH. We report that the cross-sectional geometry of hydrothermally grown one-dimensional Y{sub 4}O(OH){sub 9}NO{sub 3} crystals can be tuned from spherical to hexagonal-prism like shape by introducing a particular reagent like NH{sub 4}NO{sub 3} in the presence of NH{sub 4}OH. An ‘oriented attachment’ mediated growth process takes place along with the ‘dissolution-recrystallization’ route which eventually resulted in the generation of the single crystals with hexagonal-prism like morphology.

36 MATERIALS SCIENCE↗

Updates on Modeling the Water Cycle with the NASA Ames Mars Global Climate Model

Global Circulation Models (GCMs) have made steady progress in simulating the current Mars water cycle. It is now widely recognized that clouds are a critical component that can significantly affect the nature of the simulated water cycle. Two processes in particular are key to implementing clouds in a GCM: the microphysical processes of formation and dissipation, and their radiative effects on heating/ cooling rates. Together, these processes alter the thermal structure, change the dynamics, and regulate inter-hemispheric transport. We have made considerable progress representing these processes in the NASA Ames GCM, particularly in the presence of radiatively active water ice clouds. We present the current state of our group's water cycle modeling efforts, show results from selected simulations, highlight some of the issues, and discuss avenues for further investigation.­

Global Circulation Models (GCMs)↗

Synthesis of low core loss Finemet/Ni0.5Zn0.5Fe2O4 composites by co-precipitation method

Highlights: • Finemet/NiZn ferrite composites were synthesized by co-precipitation method. • Magnetic properties can be adjusted by controlling oxygen partial pressure. • It shows lower core loss about 30.5 mW/cm{sup 3} at 100 kHz and 100 mT. - Abstract: Finemet/Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} core/shell structure composites have been prepared by a co-precipitation method followed by a high temperature sintering process. The formation mechanism of the core/shell structures and the effects of oxygen partial pressure during the sintering process on the phase structure, microstructure, and magnetic properties were discussed. Low and high oxygen partial pressures resulted in the formation of crystal defects and a reduction of the magnetic properties of the composites. The magnetic properties could be adjusted by controlling the oxygen partial pressure and the optimal magnetic properties of the composites were obtained by sintering under an oxygen partial pressure of 10%. The resulting composite exhibited a high permeability of 61, a high saturation magnetization of 135.5 emu/g and a low core loss of approximately 30.5 mW/cm{sup 3} at 100 kHz and 100 mT.

36 MATERIALS SCIENCE↗