Search NASA⌕ Search

SEARCH · Search NASA

Results for “observable behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

Examination of the temperature dependent electronic behavior of GeTe for switching applications

The DC and RF electronic behaviors of GeTe-based phase change material switches as a function of temperature, from 25 K to 375 K, have been examined. In its polycrystalline (ON) state, GeTe behaved as a degenerate p-type semiconductor, exhibiting metal-like temperature dependence in the DC regime. This was consistent with the polycrystalline (ON) state RF performance of the switch, which exhibited low resistance S-parameter characteristics. In its amorphous (OFF) state, the GeTe presented significantly greater DC resistance that varied considerably with bias and temperature. At low biases (<1 V) and temperatures (<200 K), the amorphous GeTe low-field resistance dramatically increased, resulting in exceptionally high amorphous-polycrystalline (OFF-ON) resistance ratios, exceeding 10{sup 9} at cryogenic temperatures. At higher biases and temperatures, the amorphous GeTe exhibited nonlinear current-voltage characteristics that were best fit by a space-charge limited conduction model that incorporates the effect of a defect band. The observed conduction behavior suggests the presence of two regions of localized traps within the bandgap of the amorphous GeTe, located at approximately 0.26–0.27 eV and 0.56–0.57 eV from the valence band. Unlike the polycrystalline state, the high resistance DC behavior of amorphous GeTe does not translate to the RF switch performance; instead, a parasitic capacitance associated with the RF switch geometry dominates OFF state RF transmission.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Microsegregation in directionally solidified Pb-8.4 at. pct Au alloy

The dependence of microsegregation behavior on growth rate and thermal gradient has been examined in a Pb-8.4 at. pct Au alloy material partially directionally solidified and quenched. The composition of the quenched 'liquid' at the dendrite tip (Ct), that of the eutectic-like solid phase freezing from the interdendritic liquid at the base of dendrite (Cse), the volume fraction of this eutectic-like region (fe), and solute profiles in the interdendritic quenched liquid and ahead of the dendrite have been measured. Two dendritic growth models for solidification of a binary alloy melt in a positive thermal gradient at the liquid-solid interface, one for dendrites with 'minimum undercooled dendrite tip' and the other for an Ivantsov type of dendrite with 'marginally stable tip', have been examined for a quantitative comparison with measured values of Ct, Cse, and fe. Convection in the melt, possibly due to horizontal density gradients, is found to be a serious limitation for theoretical understanding of the observed experimental behavior and meaningful comparison of theories.

Tewari, S. N.↗

Modeling electric vehicle adoption considering a latent travel pattern construct and charging infrastructure

This paper presents a behavioral model of public, revealed preferences (RP) for various types of electric vehicles (EVs) while accounting for a latent (green) travel pattern construct and charging infrastructure characteristics. Specifically, a two-level nested logit (NL) model is estimated to explain households' fuel type choice among five alternatives and three nests: (1) battery electric vehicles (BEVs); (2) hybrid vehicles including hybrid electric vehicles (HEVs) and plug-in HEVs (PHEVs); and (3) conventional vehicles including gasoline and diesel vehicles. Further, a latent travel pattern construct which captures a week-long number of trips by non-vehicle travel modes as well as daily vehicle and tollway use is estimated in a structural equation setting and subsequently fed into the NL model. Using a recent RP dataset from the California Household Travel Survey, we identify market segments for alternative fuel types based on households' socio-economic characteristics, built environment factors concerning public plug-in EV (PEV) charging infrastructure characteristics, latent and observable travel behavior factors of a household vehicle's principal driver, and vehicle attributes. The results highlight that the number of public PEV charging stations is only significant for households choosing PHEVs and interestingly insignificant in the BEV utility. Furthermore, the sensitivity analysis of the findings reveals that PHEV users are elastic with respect to household vehicle ownership ratio and the latent green travel pattern construct, while BEV users are inelastic to any explanatory variable.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Designing Piezoelectric Films for Micro Electromechanical Systems

Piezoelectric thin films are of increasing interest in low-voltage micro electromechanical systems for sensing, actuation, and energy harvesting. They also serve as model systems to study fundamental behavior in piezoelectrics. Next-generation technologies such as ultrasound pill cameras, flexible ultrasound arrays, and energy harvesting systems for unattended wireless sensors will all benefit from improvements in the piezoelectric properties of the films. This paper describes tailoring the composition, microstructure, orientation of thin films, and substrate choice to optimize the response. It is shown that increases in the grain size of lead-based perovskite films from 75 to 300 nm results in 40 and 20% increases in the permittivity and piezoelectric coefficients, respectively. This is accompanied by an increase in the nonlinearity in the response. Band excitation piezoresponse force microscopy was used to interrogate the nonlinearity locally. It was found that chemical solution-derived PbZr(0.52)Ti(0.48)O(3) thin films show clusters of larger nonlinear response embedded in a more weakly nonlinear matrix. The scale of the clusters significantly exceeds that of the grain size, suggesting that collective motion of many domain walls contributes to the observed Rayleigh behavior in these films. Finally, it is shown that it is possible to increase the energy-harvesting figure of merit through appropriate materials choice, strong imprint, and composite connectivity patterns.

Trolier-McKinstry, Susan↗

Spinning down newborn neutron stars: Nonlinear development of the r-mode instability

We model the nonlinear saturation of the r-mode instability via three-mode couplings and the effects of the instability on the spin evolution of young neutron stars. We include one mode triplet consisting of the r-mode and two near-resonant inertial modes that couple to it. We find that the spectrum of evolutions is more diverse than previously thought. We start our evolutions with a star of temperature {approx}10{sup 10} K and a spin frequency close to the Kepler break-up frequency. We assume that hyperon bulk viscosity dominates at high temperatures (T{approx}10{sup 9}-10{sup 10} K) and boundary layer viscosity dominates at lower temperatures ({approx}a fewx10{sup 8} K). To explore possible nonlinear behavior, we vary properties of the star such as the hyperon superfluid transition temperature, the strength of the boundary layer viscosity, and the fraction of the star that cools via direct URCA reactions. The evolution of the star is dynamic and initially dominated by fast neutrino cooling. Nonlinear effects become important when the r-mode amplitude grows above its first parametric instability threshold. The balance between neutrino cooling and viscous heating plays an important role in the evolution. Depending on the initial r-mode amplitude, and on the strength of the viscosity and of the cooling this balance can occur at different temperatures. If thermal equilibrium occurs on the r-mode stability curve, where gravitational driving equals viscous damping, the evolution may be adequately described by a one-mode model. Otherwise, nonlinear effects are important and lead to various more complicated scenarios. Once thermal balance occurs, the star spins down oscillating between thermal equilibrium states until the instability is no longer active. The average evolution of the mode amplitudes can be approximated by quasistationary states that are determined algebraically. For lower viscosity we observe runaway behavior in which the r-mode amplitude passes several parametric instability thresholds. In this case more modes need to be included to model the evolution accurately. In the most optimistic case, we find that gravitational radiation from the r-mode instability in a very young, fast spinning neutron star within about 1 Mpc of Earth may be detectable by advanced LIGO for years, and perhaps decades, after formation. Details regarding the amplitude and duration of the emission depend on the internal dissipation of the modes of the star, which would be probed by such detections.

79 ASTRONOMY AND ASTROPHYSICS↗

Universal relations for neutron star 𝑓-mode and 𝑔-mode oscillations

Among the various oscillation modes of neutron stars, 𝑓- and 𝑔- modes are the most likely to be ultimately observed in binary neutron star mergers due to their relatively large coupling and shared frequencies with tidal excitations. The 𝑓-mode frequency and damping time are known to correlate in normal neutron stars with their compactness, and previous fits to hadronic stars are extended and shown to be valid for an extremely broad sampling of equations of state using a piecewise polytropic parametrization scheme for hadrons and a constant sound-speed parametrization for quark matter. Separate fits applicable to quark (self-bound) stars are improved. Much more significant correlations exist with tidal deformability, and therefore with moment of inertia and quadrupole moment. It is conclusively demonstrated that these correlations are the same for all types of stars, whether hadronic, hybrid, or pure quark, and its accuracy is quantified. A novel 1-node branch of the 𝑓-mode that occurs in low-mass hybrid stars in a narrow mass range just beyond the critical mass necessary for a phase transition to appear is identified. This 1-node branch shows the largest, but still small, deviations from the universal correlation for any configuration. It is characterized by a nonmonotonic relation between neutron star mass and 𝑓-mode frequency, in contrast to the behavior otherwise observed in normal, quark and hybrid stars. The 𝑔-mode only exists in matter with a nonbarotropic equation of state involving temperature, chemical potential or composition (such as being out of beta equilibrium), or a phase transition in barotropic matter. Here, the 𝑔-mode therefore could serve as a probe for studying phase transitions in hybrid stars. In contrast with the 𝑓-mode, 𝑔-mode frequencies do not correlate well with tidal deformability, but depend strongly on properties of the transition (the density and the magnitude of the discontinuity) at the transition. Imposing causality and maximum mass constraints, a fit involving neutron star and phase transition properties is found and the 𝑔-mode frequency is determined to have an upper bound of about 1.25 kHz. However, if the sound speed 𝑐𝑠 in the inner core at densities above the phase transition density is restricted to 𝑐$^{2}_{𝑠}$ ≤1/3, 𝑔-mode frequencies can only reach about 0.8 kHz, which are significantly lower than 𝑓-mode frequencies (1.3–2.8 kHz). 𝑔-mode gravitational wave damping times are found to be extremely long, >10 4 s (102 s) in the inner core with 𝑐$^{2}_{𝑠}$ ≤1/3 (1), in comparison with 𝑓-mode damping times (0.1–1 s).

Composition of astronomical objects↗

Technical note: Using long short-term memory models to fill data gaps in hydrological monitoring networks

Abstract. Quantifying the spatiotemporal dynamics in subsurface hydrological flows over a long time window usually employs a network of monitoring wells. However, such observations are often spatially sparse with potential temporal gaps due to poor quality or instrument failure. In this study, we explore the ability of recurrent neural networks to fill gaps in a spatially distributed time-series dataset. We use a well network that monitors the dynamic and heterogeneous hydrologic exchanges between the Columbia River and its adjacent groundwater aquifer at the U.S. Department of Energy's Hanford site. This 10-year-long dataset contains hourly temperature, specific conductance, and groundwater table elevation measurements from 42 wells with gaps of various lengths. We employ a long short-term memory (LSTM) model to capture the temporal variations in the observed system behaviors needed for gap filling. The performance of the LSTM-based gap-filling method was evaluated against a traditional autoregressive integrated moving average (ARIMA) method in terms of error statistics and accuracy in capturing the temporal patterns of river corridor wells with various dynamics signatures. Our study demonstrates that the ARIMA models yield better average error statistics, although they tend to have larger errors during time windows with abrupt changes or high-frequency (daily and subdaily) variations. The LSTM-based models excel in capturing both high-frequency and low-frequency (monthly and seasonal) dynamics. However, the inclusion of high-frequency fluctuations may also lead to overly dynamic predictions in time windows that lack such fluctuations. The LSTM can take advantage of the spatial information from neighboring wells to improve the gap-filling accuracy, especially for long gaps in system states that vary at subdaily scales. While LSTM models require substantial training data and have limited extrapolation power beyond the conditions represented in the training data, they afford great flexibility to account for the spatial correlations, temporal correlations, and nonlinearity in data without a priori assumptions. Thus, LSTMs provide effective alternatives to fill in data gaps in spatially distributed time-series observations characterized by multiple dominant frequencies of variability, which are essential for advancing our understanding of dynamic complex systems.

54 ENVIRONMENTAL SCIENCES↗

Mechanical Properties of Additively Manufactured 316L Stainless Steel Before and After Neutron Irradiation–FY23

This report presents the observed mechanical behavior of the additively manufactured (AM) 316L stainless steel (SS) before and after neutron irradiation. In the Advanced Materials and Manufacturing Technologies (AMMT) program, a variety of mechanical and physical property data are generated and accumulated to assess the AM austenitic alloy for nuclear reactor applications. The testing and evaluation task in the FY 2023 focused on elucidating the effects of sampling location and build size on the mechanical properties of AM 316L SS (in stress-relieved condition) before and after neutron irradiation. The laser powder bed fusion (LPBF) process produced 316L plates of three distinct sizes from which SS-J3 miniature tensile specimens were machined from six different locations. The tensile specimens were irradiated in the High Flux Isotope Reactor (HFIR) normally to 2 and 10 dpa at the target temperatures of 300 °C and 600 °C. Post-irradiation tensile testing was performed at room temperature, 300 °C, and 600 °C. The mechanical properties of AM 316L SS were significantly influenced by the characteristic microstructures of printed materials, which include fine grains and high-density dislocations. Compared with the traditional 316L SS, AM 316L showed higher initial strength and lower ductility. Regardless of sampling location, the AM 316L steel retained relatively high strength and ductility to the highest irradiation dose. A prompt necking at yield (with little uniform ductility) was observed after irradiation at 300 °C but no embrittlement was observed up to 10 dpa. Ductilization by irradiation–the radiation-induced increase of ductility–was observed for the 600 °C irradiation only and it occurred in low dose range only. The neutron irradiation increased the data variation in many tensile property datasets, particularly after 600 °C irradiation, and no clear dependence of tensile properties on build thickness or sampling location was observed.

36 MATERIALS SCIENCE↗

Deuterium transport and retention properties of representative fusion blanket structural materials

Reduced activation ferritic-martensitic (RAFM) steels have been developed for decades for use as fusion blanket structural materials, and have advantages in both mechanical properties and irradiation resistance following careful engineering of the microstructure. However, the hydrogen isotope behavior in these proposed fusion structural materials is not well understood, but is important to assess since it impacts the fusion reactor safety and self-sufficient tritium fuel cycle. Here, we investigated deuterium transport and retention in representative advanced RAFM steels, including castable nanostructured alloys (CNAs), and oxide-dispersion-strengthened (ODS) steels. A gas-driven permeation (GDP) system was used to measure the permeability, diffusivity and solubility of the studied materials, covering the temperature range from 623 K to 873 K, and the loading pressures from 1.8 x 10 4 to 1.0 x 10 5 Pa. The results indicated that the deuterium permeability has little material dependence. In contrast, the deuterium diffusivity of the studied materials showed significant variation. The deuterium diffusivity in ODS steels is one order of magnitude lower than that in RAFM steels and CNAs, and correspondingly, have an effective solubility that is 2–10 times larger than RAFM steels and CNAs. In addition, thermal desorption spectroscopy (TDS) measurements were performed to assess the deuterium retention and desorption of these materials following a static thermal deuterium charging at 723 Kfor 1 hour under the deuterium pressure of 1.0 x 10 5 Pa. It was found that ODS steels exhibit the highest deuterium retention and have broader desorption peaks. Microstructural features contributing to deuterium retention and impacting deuterium transport are discussed to rationalize the observed deuterium behavior in the studied RAFM steels.

36 MATERIALS SCIENCE↗

Influence of Humidity On the Aerosol Scattering Coefficient and Its Effect on the Upwelling Radiance During ACE-2

Aerosol scattering coefficients (sigma(sub sp)) have been measured over the ocean at different relative humidities (RH) as a function of altitude in the region surrounding the Canary Islands during the Second Aerosol Characterization Experiment (ACE-2) in June and July 1997. The data were collected by the University of Washington passive humidigraph (UWPH) mounted on the Pelican research aircraft. Concurrently, particle size distributions, absorption coefficients and aerosol optical depth were measured throughout 17 flights. A parameterization of sigma(sub sp) as a function of RH was utilized to assess the impact of aerosol hydration on the upwelling radiance (normalized to the solar constant and cosine of zenith angle). The top of the atmosphere radiance signal was simulated at wavelengths corresponding to visible and near-infrared bands of the EOS (Earth Observing System) AM-1 (Terra) detectors, MODIS (Moderate Resolution Imaging Spectroradiometer) and MISR (Multi-angle Imaging Spectroradiometer). The UWPH measured sigma(sub sp) at two RHs, one below and the other above ambient conditions. Ambient sigma(sub sp) was obtained by interpolation of these two measurements. The data were stratified in terms of three types of aerosols: Saharan dust, clean marine (marine boundary layer background) and polluted marine aerosols (i.e., two- or one-day old polluted aerosols advected from Europe). An empirical relation for the dependence of sigma(sub sp) on RH, defined by sigma(sub sp)(RH) = k.(1 - RH/100)(sup gamma), was used with the hygroscopic exponent gamma derived from the data. The following gamma values were obtained for the 3 aerosol types: gamma(dust) = 0.23 +/- 0.05, gamma(clean marine) = 0.69 +/- 0.06 and gamma(polluted marine) = 0.57 +/- 0.06. Based on the measured gammas, the above equation was utilized to derive aerosol models with different hygroscopicities. The satellite simulation signal code 6S was used to compute the upwelling radiance corresponding to each of those aerosol models at several ambient humidities. For the prelaunch estimated precision of the sensors and the assumed viewing geometry of the instrument, the simulations suggest that the spectral and angular dependence of the reflectance measured by MISR is not sufficient to distinguish aerosol models with various different combinations of values for dry composition, gamma and ambient RH. A similar behavior is observed for MODIS at visible wavelengths. However, the 2100 nm band of MODIS appears to be able to differentiate between at least same aerosol models with different aerosol hygroscopicity given the MODIS calibration error requirements. This result suggests the possibility of retrieval of aerosol hygroscopicity by MODIS.

Gasso, S.↗

Relativistic MHD simulations of poynting flux-driven jets

Relativistic, magnetized jets are observed to propagate to very large distances in many active galactic nuclei (AGNs). We use three-dimensional relativistic MHD simulations to study the propagation of Poynting flux-driven jets in AGNs. These jets are already assumed to be being launched from the vicinity (∼10{sup 3} gravitational radii) of supermassive black holes. Jet injections are characterized by a model described in Li et al., and we follow the propagation of these jets to ∼parsec scales. We find that these current-carrying jets are always collimated and mildly relativistic. When α, the ratio of toroidal-to-poloidal magnetic flux injection, is large the jet is subject to nonaxisymmetric current-driven instabilities (CDI) which lead to substantial dissipation and reduced jet speed. However, even with the presence of instabilities, the jet is not disrupted and will continue to propagate to large distances. We suggest that the relatively weak impact by the instability is due to the nature of the instability being convective and the fact that the jet magnetic fields are rapidly evolving on Alfvénic time scales. We present the detailed jet properties and show that far from the jet launching region, a substantial amount of magnetic energy has been transformed into kinetic energy and thermal energy, producing a jet magnetization number σ < 1. In addition, we have also studied the effects of a gas pressure supported 'disk' surrounding the injection region, and qualitatively similar global jet behaviors were observed. We stress that jet collimation, CDIs, and the subsequent energy transitions are intrinsic features of current-carrying jets.

79 ASTRONOMY AND ASTROPHYSICS↗

Effects of soluble flavin on heterogeneous electron transfer between surface-exposed bacterial cytochromes and iron oxides

Dissimilatory iron-reducing bacteria can utilize insoluble Fe(Mn)-oxides as a terminal electron acceptor under anaerobic conditions. For Shewanella species specifically, some evidence suggests that iron reduction is associated with the secretion of flavin mononucleotide (FMN) and riboflavin that are proposed to mediate electron transfer (Marsili et al., 2008). In this work, we used methyl viologen (MV•+)-encapsulated, porin-cytochrome complex (MtrCAB) embedded liposomes (MELs) as a synthetic model of the Shewanella outer membrane to investigate the proposed mediating behavior of secreted flavins. The reduction kinetics of goethite, hematite and lepidocrocite (200 µM) by MELs ([MV•+] ~ 42 µM and MtrABC ≤ 1 nM) were determined in the presence FMN at pH 7.0 in N2 atmosphere by monitoring the concentrations of MV•+ and FMN through their characteristic UV-visible absorption spectra. Experiments were performed where i) FMN and Fe(III)-oxide were mixed and then reacted with the reduced MELs and ii) FMN was reacted with the reduced MELs followed by addition of Fe(III)-oxide. The redox reactions proceeded in two steps: a fast step that was completed in a few seconds, and a slower one lasting over 400 seconds. For all three Fe(III)-oxides, the initial reaction rate in the presence of a low concentration of FMN (≤ 1 µM) was at least a factor of five faster than those with MELs alone, and orders of magnitude faster than those by FMNH2, suggesting that FMN may serve as a co-factor that enhances electron transfer from outer-membrane c-cytochromes to Fe(III)-oxides. The rate and extent of the initial reaction followed the order of lepidocrocite > hematite > goethite, the same as their reduction potentials, implying thermodynamic control on reaction rate. However, at higher FMN concentrations (> 1 µM), the reaction rates for both steps decreased and varied inversely with FMN concentration, indicating that FMN inhibited the MEL to Fe(III)-oxide electron transfer reaction. The implications of the observed kinetic behaviors to flavin-mediated Fe(III) oxide reduction in natural environments are discussed.

Environmental Molecular Sciences Laboratory↗

Combustion Characteristics in a Non-Premixed Cool-Flame Regime of n-Heptane in Microgravity

A series of distinct phenomena have recently been observed in single-fuel-droplet combustion tests performed on the International Space Station (ISS). This study attempts to simulate the observed flame behavior numerically using a gaseous n-heptane fuel source in zero gravity and a time-dependent axisymmetric (2D) code, which includes a detailed reaction mechanism (127 species and 1130 reactions), diffusive transport, and a radiation model (for CH4, CO, CO2, H2O, and soot). The calculated combustion characteristics depend strongly on the air velocity around the fuel source. In a near-quiescent air environment (< or = 2 mm/s), with a sufficiently large fuel injection velocity (1 cm/s), a growing spherical diffusion flame extinguishes at ≈1200 K due to radiative heat losses. This is typically followed by a transition to the low-temperature (cool-flame) regime with a reaction zone (at ≈700 K) in close proximity to the fuel source. The 'cool flame' regime is formed due to the negative temperature coefficient in the low-temperature chemistry. After a relatively long period (≈18 s) of the cool flame regime, a flash re-ignition occurs, associated with flame-edge propagation and subsequent extinction of the re-ignited flame. In a low-speed (≈3 mm/s) airstream (which simulates the slight droplet movement), the diffusion flame is enhanced upstream and experiences a local extinction downstream at ≈1200 K, followed by steady flame pulsations (≈0.4 Hz). At higher air velocities (4-10 mm/s), the locally extinguished flame becomes steady state. The present axisymmetric computational approach helps in revealing the non-premixed 'cool flame' structure and 2D flame-flow interactions observed in recent microgravity droplet combustion experiments.

diffusion flame↗

Slugging Flow of Water Draining from the Bottom of a Non-Vented Container

Experiments were run to observe the behavior of water exiting through an orifice at the bottom of an non-vented container. Initially, the container is nearly full of water with a small air space on top. Once the orifice was uncovered, the slugging rate and the drain rate of the water leaving the container were measured. Upon initially opening the orifice, water drains out until the air pressure above the water reduces enough that the air pressure drop from inside to outside of the container supports the water column and the water stops flowing. Air then enters the container through the orifice forming a bubble, which grows until it detaches and bubbles through the water to reach the air space. Once the bubble enters, this added air increases the pressure in the air space enough to allow the water to start flowing out again. This cycle of flow out, flow stoppage, air inflow, and bubble breakoff continues over and over until the hole is closed or the container empties. This is referred to as the “slugging cycle.” A mechanism is proposed to describe the slugging cycle which is modeled analytically. This paper presents the description of the experiments, data obtained, the mechanistic model, and comparison of the model to the experimental data. The model predicts outflow rates close to experimental values. Flow rates from non-vented containers are more than 10 to 20 less than vented containers. The bubbles which must enter the container periodically to increase the internal air pressure stop the water flow momentarily so are responsible for this large decrease in flow rate. Swirl induced in the non-vented container causes the flow rates to increase by a factor of two. The flow rate out of a non-vented container is independent of water height which is in direct contrast to a vented container where the flow rate is proportional to the square root of the water height. The constant rate is due to the container pressure. The higher the water level, the lower the air pressure is in the container. This analytical model requires input of the bubble size. The volume recommended is the volume of a cylinder with the base of the orifice area and length of 3.3 cm. Slugging rate varies only a small amount falling in the range to 2 to 4 cycles/sec. Preliminary work with other containers indicates larger containers, larger orifices and nozzle exit shapes produce higher specific flow rates. The standard multiphase flow equations could not be used to analyze this situation because the two phases are not interpenetrating. Instead one phase must fully stop before the other can flow. Interpenetrating phases allow can pass one another each affecting the other with friction and virtual mass. An interesting observation: The negative air pressure in the container is observable. It equals the water height.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Van Allen Probes, THEMIS, GOES, and cluster observations of EMIC waves, ULF pulsations, and an electron flux dropout

We examined an electron flux dropout during the 12–14 November 2012 geomagnetic storm using observations from seven spacecraft: the two Van Allen Probes, Time History of Events and Macroscale Interactions during Substorms (THEMIS)-A (P5), Cluster 2, and Geostationary Operational Environmental Satellites (GOES) 13, 14, and 15. The electron fluxes for energies greater than 2.0 MeV observed by GOES 13, 14, and 15 at geosynchronous orbit and by the Van Allen Probes remained at or near instrumental background levels for more than 24 h from 12 to 14 November. For energies of 0.8 MeV, the GOES satellites observed two shorter intervals of reduced electron fluxes. The first interval of reduced 0.8 MeV electron fluxes on 12–13 November was associated with an interplanetary shock and a sudden impulse. Cluster, THEMIS, and GOES observed intense He + electromagnetic ion cyclotron (EMIC) waves from just inside geosynchronous orbit out to the magnetopause across the dayside to the dusk flank. The second interval of reduced 0.8 MeV electron fluxes on 13–14 November was associated with a solar sector boundary crossing and development of a geomagnetic storm with Dst <–100 nT. At the start of the recovery phase, both the 0.8 and 2.0 MeV electron fluxes finally returned to near prestorm values, possibly in response to strong ultralow frequency (ULF) waves observed by the Van Allen Probes near dawn. A combination of adiabatic effects, losses to the magnetopause, scattering by EMIC waves, and acceleration by ULF waves can explain the observed electron behavior.

58 GEOSCIENCES↗

Effect of Unsaturated Flow Modes on Partitioning Dynamics of Gravity-Driven Flow at a Simple Fracture Intersection: Laboratory Study and Three-Dimensional Smoothed Particle Hydrodynamics Simulations

In this work, we study unsaturated gravity-driven free-surface flows on a synthetic surface intersected by a horizontal fracture and the importance of flow modes (droplet; rivulet) on the partitioning behavior at the fracture intersection. We present laboratory experiments, three-dimensional smoothed particle hydrodynamics (SPH) simulations using a heavily parallelized code, and an analytical solution. The flow-rate-dependent mode switching from droplets to rivulets is reproduced by the SPH model, and the transition ranges agree with the laboratory experiments. We show that flow modes heavily influence the bypass behavior. Flows favoring the formation of droplets exhibit a much stronger bypass capacity compared to rivulet flows, where nearly the whole fluid mass is initially stored within the horizontal fracture. This behavior is demonstrated for a multi-inlet laboratory setup where the inlet- specific flow rate is chosen so that either a droplet or rivulet flow persists. The effect of fluid buffering within the horizontal fracture is presented in terms of dimensionless fracture in- flow so that characteristic scaling regimes can be recovered. For both cases (rivulets and droplets), the flow within the horizontal fracture transitions into a Washburn regime until a critical threshold is reached and the bypass efficiency increases. For rivulet flows, the initial filling of the horizontal fracture is described by classical plug flow. Meanwhile, for droplet flows, a size-dependent partitioning behavior is observed, and the filling of the fracture takes longer. For the case of rivulet flow, we provide an analytical solution that demonstrates the existence of classical Washburn flow within the horizontal fracture.

unsaturated flow, fractured media, smoothed partic↗

Surface Domain Structures and Mesoscopic Phase Transition in Relaxor Ferroelectrics

Relaxor ferroelectrics are a prototypical example of ferroic systems in which interplay between atomic disorder and order parameters gives rise to emergence of unusual properties, including non-exponential relaxations, memory effects, polarization rotations, and broad spectrum of bias- and temperatureinduced phase transitions. Despite more than 40 years of extensive research following the original discovery of ferroelectric relaxors by the Smolensky group, the most basic aspect of these materials the existence and nature of order parameter has not been understood thoroughly. Using extensive imaging and spectroscopic studies by variable-temperature and time resolved piezoresponse force microscopy, we fi nd that the observed mesoscopic behavior is consistent with the presence of two effective order parameters describing dynamic and static parts of polarization, respectively. The static component gives rise to rich spatially ordered systems on the 100 nm length scales, and are only weakly responsive to electric fi eld. The surface of relaxors undergoes a mesoscopic symmetry breaking leading to the freezing of polarization fl uctuations and shift of corresponding transition temperature.

Kholkin, Andrei↗

Engineering the Interlayer Spacing by Pre-Intercalation for High Performance Supercapacitor MXene Electrodes in Room Temperature Ionic Liquid

MXenes exhibit excellent capacitance at high scan rates in sulfuric acid aqueous electrolytes, but the narrow potential window of aqueous electrolytes limits the energy density. Organic electrolytes and room-temperature ionic liquids (RTILs) can provide higher potential windows, leading to higher energy density. The large cation size of RTIL hinders its intercalation in-between the layers of MXene limiting the specific capacitance in comparison to aqueous electrolytes. In this work, different chain lengths alkylammonium (AA) cations are intercalated into Ti 3 C 2 T x , producing variation of MXene interlayer spacings (d-spacing). AA-cation-intercalated Ti 3 C 2 T x (AA-Ti 3 C 2 ), exhibits higher specific capacitances, and cycling stabilities than pristine Ti 3 C 2 T x in 1 m 1-ethly-3-methylimidazolium bis-(trifluoromethylsulfonyl)-imide (EMIMTFSI) in acetonitrile and neat EMIMTFSI RTIL electrolytes. Pre-intercalated MXene with an interlayer spacing of ≈2.2 nm, can deliver a large specific capacitance of 257 F g –1 (1428 mF cm –2 and 492 F cm –3 ) in neat EMIMTFSI electrolyte leading to high energy density. Quasi elastic neutron scattering and electrochemical impedance spectroscopy are used to study the dynamics of confined RTIL in pre-intercalated MXene. Furthermore, molecular dynamics simulations suggest significant differences in the structures of RTIL ions and AA cations inside the Ti 3 C 2 T x interlayer, providing insights into the differences in the observed electrochemical behavior.

36 MATERIALS SCIENCE↗