Search NASA⌕ Search

SEARCH · Search NASA

Results for “powder diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

Unique LaTaO[subscript 4] Polymorph for Multiple Energy Applications

Rare-earth niobate and tantalate (RE-Nb/Ta) materials are of considerable interest in environmental and energy-related applications that include phosphors for solid-state lighting, photocatalysts for both contaminant degeneration and H{sub 2} generation, chemically robust hosts for nuclear materials and wastes, and ion conductors for lithium batteries or solid-oxide fuel cells. However, the chemically inert nature limits the synthetic routes available to obtain these materials, which in turn hampers the discovery and development of new RE-Nb/Ta phases. Of the simple orthotantalate, LaTaO{sub 4}, there were three polymorphs known prior. With this paper, we present the structural characterization (from high-resolution X-ray powder diffraction data collected at the APS 11-BM line) of a fourth polymorph. It is obtained only from dehydration of La{sub 2}Ta{sub 2}O{sub 7}(OH){sub 2}, which is in turn synthesized hydrothermally. The structure of the new LaTaO{sub 4} polymorph is distinctive from the others in the arrangement of the alternating La-O polyhedra layers and TaO{sub 6} octahedra layers. Luminescence measurements (Eu-doped) and photocatalysis studies of the new LaTaO{sub 4} polymorph, and comparison to the performance of a previously described LaTaO{sub 4} polymorph reveals enhanced performance of the new polymorph in both applications. This study illustrates the relevance of form-function relationships in solid-state materials, as well as the important role of synthesis in the development of advanced functional materials.

30 DIRECT ENERGY CONVERSION↗

Reaction mechanisms for enhancing mineral sequestration of CO{sub 2}

Storage of CO{sub 2} through mineral sequestration using olivine has been shown to produce environmentally benign carbonates. However, due to the formation of a rate-limiting reaction product layer, the rate of reaction is insufficient for large-scale applications. We report the results of altering the reactant solution composition and the resultant reaction mechanism to enhance the reaction rate. The products were analyzed for total carbon content with thermal decomposition analysis, product phase compositions with Debye-Scherrer X-ray powder diffraction (XRD), surface morphology with scanning electron microscopy (SEM), and composition with energy dispersive X-ray spectroscopy (EDXS). Carbon analysis showed that an increase in bicarbonate ion activity increased the olivine to carbonate conversion rate. The fastest conversion rate, 63% conversion in one hour, occurred in a solution of 5.5 M KHCO{sub 3}. Additionally, SEM confirmed that when the bicarbonate ion activity was increased, magnesium carbonate product particles significantly increased in both number density and size and the rate passivating-reaction layer exfoliation was augmented. 30 refs., 5 figs., 1 tab.

01 COAL, LIGNITE, AND PEAT↗

Structural similarities between biogenic uraninites produced by phylogenetically and metabolically diverse bacteria.

While the product of microbial uranium reduction is often reported to be“UO2”, a comprehensive characterization including stoichiometry and unit cell determination is available for only one Shewanella species. Here, we compare the products of batch uranyl reduction by a collection of dissimilatory metal- and sulfate-reducing bacteria of the genera Shewanella, Geobacter, Anaeromyxobacter, and Desulfovibrio under similar laboratory conditions. Our results demonstrate that U(VI) bioreduction by this assortment of commonly studied, environmentally relevant bacteria leads to the precipitation of uraninite with a composition between UO2.00 and UO2.075, regardless of phylogenetic or metabolic diversity. Coupled analyses, including electron microscopy, X-ray absorption spectroscopy, and powder diffraction, confirm that structurally and chemically analogous uraninite solids are produced. These biogenic uraninites have particle diameters of about 2-3 nm and lattice constants consistent with UO2.0 and exhibit a high degree of intermediate-range order. Results indicate that phylogenetic and metabolic variability within delta- and gamma-proteobacteria has little effect on nascent biouraninite structure or crystal size under the investigated conditions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Combining pair distribution function and computational methods to understand lithium insertion in brookite (TiO{sub 2}).

X-ray pair distribution function (PDF) methods and first-principles calculations have been combined to probe the structure of electrochemically lithiated TiO{sub 2} Brookite. Traditional powder diffraction studies suggest that Brookite amorphizes upon lithium insertion, with the Bragg reflections disappearing. However, PDF analysis indicates that the TiO{sub 2} framework connectivity is maintained throughout lithium intercalation, with expansions along the a and b axes. The Li{sup +} ions within the framework are poorly observed in the X-ray PDF, which is dominated by contributions from the more strongly scattering Ti and O atoms. First-principles calculations were used to identify energetically favorable Li{sup +} sites within the Brookite lattice and to develop a complete structural model of the lithiated material. This model replicates the local structure and decreased intermediate range order observed in the PDF data. The analysis suggests that local structural distortions of the TiO{sub 2} lattice accommodate lithium in five-coordinate sites. This structural model is consistent with the observed electrochemical behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Importance of halogen---halogen contacts for the structural and magnetic properties of CuX{<_2}(pyrazine-N,N'-dioxide)(H{<_2}O){<_2} (x = Cl & Br).

The structural and magnetic properties of the newly crystallized CuX{sub 2}(pyzO)(H{sub 2}O){sub 2} (X = Cl, Br; pyzO = pyrazine-N,N{prime}-dioxide) coordination polymers are reported. These isostructural compounds crystallize in the monoclinic space group C2/c with, at 150 K, a = 17.0515(7) {angstrom}, b = 5.5560(2) {angstrom}, c = 10.4254(5) {angstrom}, {beta} = 115.400(2){sup o}, and V = 892.21(7) {angstrom}{sup 3} for X = Cl and a = 17.3457(8) {angstrom}, b = 5.6766(3) {angstrom}, c = 10.6979(5) {angstrom}, {beta} = 115.593(2){sup o}, and V = 950.01(8) {angstrom}{sup 3} for X = Br. Their crystal structure is characterized by one-dimensional chains of Cu{sup 2+} ions linked through bidentate pyzO ligands. These chains are joined together through OH {hor_ellipsis} O hydrogen bonds between the water ligands and pyzO oxygen atoms and Cu-X {hor_ellipsis} X-Cu contacts. Bulk magnetic susceptibility measurements at ambient pressure show a broad maximum at 7 (Cl) and 28 K (Br) that is indicative of short-range magnetic correlations. The dominant spin exchange is the Cu-X {hor_ellipsis} X-Cu supersuperexchange because the magnetic orbital of the Cu{sup 2+} ion is contained in the CuX{sub 2}(H{sub 2}O){sub 2} plane and the X {hor_ellipsis} X contact distances are short. The magnetic data were fitted to a Heisenberg 1D uniform antiferromagnetic chain model with J1D/kB = -11.1(1) (Cl) and -45.9(1) K (Br). Magnetization saturates at fields of 16.1(3) (Cl) and 66.7(5) T (Br), from which J1D is determined to be -11.5(2) (Cl) and -46.4(5) K (Br). For the Br analog the pressure dependence of the magnetic susceptibility indicates a gradual increase in the magnitude of J1D/kB up to -51.2 K at 0.84 GPa, suggesting a shortening of the Br {hor_ellipsis} Br contact distance under pressure. At higher pressure X-ray powder diffraction data indicates a structural phase transition at 3.5 GPa. Muon-spin relaxation measurements indicate that CuCl{sub 2}(pyzO)(H{sub 2}O){sub 2} is magnetically ordered with TN = 1.06(1) K, while the signature for long-range magnetic order in CuBr{sub 2}(pyzO)(H{sub 2}O){sub 2} was much less definitive down to 0.26 K. The results for the CuX{sub 2}(pyzO)(H{sub 2}O){sub 2} complexes are compared to the related CuX{sub 2}(pyrazine) materials.

08 HYDROGEN↗

Localization of Oxygen Interstitials in CeSrGa 3 O 7+δ Melilite

The solubility of Ce in the La1–xCexSrGa3O7+δ and La1.54–xCexSr0.46Ga3O7.27+δ melilites was investigated, along with the thermal redox stability in air of these melilites and the conductivity variation associated with oxidization of Ce3+ into Ce4+. Under CO reducing atmosphere, the La in LaSrGa3O7 may be completely substituted by Ce to form the La1–xCexSrGa3O7+δ solid solution, which is stable in air to ~600 °C when x ≥ 0.6. On the other side, the La1.54–xCexSr0.46Ga3O7.27+δ compositions displayed much lower Ce solubility (x ≤ 0.1), irrespective of the synthesis atmosphere. In the as-made La1–xCexSrGa3O7+δ, the conductivity increased with the cerium content, due to the enhanced electronic conduction arising from the 4f electrons in Ce3+ cations. At 600 °C, CeSrGa3O7+δ showed a conductivity of ~10–4 S/cm in air, nearly 4 orders of magnitude higher than that of LaSrGa3O7. The oxidation of Ce3+ into Ce4+ in CeSrGa3O7+δ slightly reduced the conductivity, and the oxygen excess did not result in apparent increase of oxide ion conduction in CeSrGa3O7+δ. The Ce doping in air also reduced the interstitial oxide ion conductivity of La1.54Sr0.46Ga3O7.27. Neutron powder diffraction study on CeSrGa3O7.39 composition revealed that the extra oxygen is incorporated in the four-linked GaO4 polyhedral environment, leading to distorted GaO5 trigonal bipyramid. The stabilization and low mobility of interstitial oxygen atoms in CeSrGa3O7+δ, in contrast with those in La1+xSr1–xGa3O7+0.5x, may be correlated with the cationic size contraction from the oxidation of Ce3+ to Ce4+. These results provide a new comprehensive understanding of the accommodation and conduction mechanism of the oxygen interstitials in the melilite structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Na[subscript 1.5]Ag[subscript 1.5]MO[subscript 3]F[subscript 3] (M = Mo, W): An Ordered Oxyfluoride Derivative of the LiNbO[subscript 3] Structure

Na{sub 1.5}Ag{sub 1.5}MoO{sub 3}F{sub 3} and Na{sub 1.5}Ag{sub 1.5}WO{sub 3}F{sub 3} have been synthesized by solid state reactions and structurally characterized using synchrotron X-ray and neutron powder diffraction. Unlike the vast majority of salts containing [MO{sub 3}F{sub 3}]{sup 3-} anions (M = Mo, W) the oxyfluoride groups in Na{sub 1.5}Ag{sub 1.5}MoO{sub 3}F{sub 3} and Na{sub 1.5}Ag{sub 1.5}WO{sub 3}F{sub 3} are orientationally ordered, so that the Na{sup +} ions are coordinated by fluorine and the Ag{sup +} ions by oxygen. The resulting structure type, which has not previously been reported, is related to the LiNbO{sub 3} structure, but the combination of Na/Ag ordering and orientational ordering of the [MO{sub 3}F{sub 3}]{sup 3-} anions produces a supercell that doubles the c-axis and changes the space group symmetry from R3 to R{bar 3}. The use of hard (Na{sup +}) and soft (Ag{sup +}) cations to direct the orientational ordering of polar oxyfluoride building units provides a new approach to the design of polar materials.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Determination of structure and phase transition of light element nanocomposites in mesoporous silica: case study of NH3BH3 in MCM-41

The structure of ammonia borane (AB), NH3BH3, infused in mesoporous silica MCM-41 and its evolution over the temperature range of 80 to 300 K was investigated using the atomic pair distribution function (PDF) analysis of synchrotron X-ray powder diffraction data in order to understand the origin of improved dehydrogenation properties of the system. Our study shows how X-ray PDF analysis can be used to elucidate the structure of light guest species loaded in mesoporous silica materials despite of its low scattering power of composed elements (N, B, and H) compared to its host (SiO2). PDF analyses of two AB-loaded compositions with weight ratio AB:MCM-41=1:1 and 3:1 provide a strong evidence that AB aggregate, previously found in AB:MCM-41≥1:1 samples, is same species as neat AB. For both of them an orthorhombic to tetragonal structural phase transition occurs at 225 K on warming. On the other hand, AB residing inside meso-pores, which is found in AB:MCM-41=1:2 sample, does not undergo such phase transition. It rather stays in tetragonal phase over a wide temperature range of 110 to 240 K and starts to lose structural correlation above 240 K. This strongly suggests that nano-confinement of AB inside meso-pores stabilizes high temperature tetragonal phase at much lower temperature. These results provide important clues to two critical questions: why nan-compositions of AB leads dehydrogenation to lower temperature and why the neat AB like propoerties are recovered at high AB loading samples. This work was supported by the US Department of Energy Office of Basic Energy Sciences, Chemical Sciences program. Pacific Northwest National Laboratory is operated by Battelle for the US Department of Energy.

43 PARTICLE ACCELERATORS↗

High Ammonia Adsorption in MFM-300 Materials: Dynamics and Charge Transfer in Host–Guest Binding

Ammonia (NH 3 ) is a promising energy resource owing to its high hydrogen density. However, its widespread application is restricted by the lack of efficient and corrosion-resistant storage materials. In this work, we report high NH 3 adsorption in a series of robust metal-organic framework (MOF) materials, MFM-300(M) (M = Fe, V, Cr, In). MFM-300(M) (M = Fe, V III , Cr) show fully reversible capacity for >20 cycles, reaching capacities of 16.1, 15.6, and 14.0 mmol g -1 , respectively, at 273 K and 1 bar. Under the same conditions, MFM-300(V IV ) exhibits the highest uptake among this series of MOFs of 17.3 mmol g -1 . In situ neutron powder diffraction, single-crystal X-ray diffraction, and electron paramagnetic resonance spectroscopy confirm that the redox-active V center enables host-guest charge transfer, with V IV being reduced to V III and NH 3 being oxidized to hydrazine (N 2 H 4 ). A combination of in situ inelastic neutron scattering and DFT modeling has revealed the binding dynamics of adsorbed NH 3 within these MOFs to afford a comprehensive insight into the application of MOF materials to the adsorption and conversion of NH 3 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Atomically Dispersed Copper Sites in a Metal–Organic Framework for Reduction of Nitrogen Dioxide

Metal-organic framework (MOF) materials provide an excellent platform to fabricate single-atom catalysts due to their structural diversity, intrinsic porosity, and designable functionality. However, the unambiguous identification of atomically dispersed metal sites and the elucidation of their role in catalysis are challenging due to limited methods of characterization and lack of direct structural information. Here, we report a comprehensive investigation of the structure and the role of atomically dispersed copper sites in UiO-66 for the catalytic reduction of NO 2 at ambient temperature. The atomic dispersion of copper sites on UiO-66 is confirmed by high-angle annular dark-field scanning transmission electron microscopy, electron paramagnetic resonance spectroscopy, and inelastic neutron scattering, and their location is identified by neutron powder diffraction and solid-state nuclear magnetic resonance spectroscopy. The Cu/UiO-66 catalyst exhibits superior catalytic performance for the reduction of NO 2 at 25 °C without the use of reductants. A selectivity of 88% for the formation of N2 at a 97% conversion of NO 2 with a lifetime of >50 h and an unprecedented turnover frequency of 6.1 h-1 is achieved under nonthermal plasma activation. In situ and operando infrared, solid-state NMR, and EPR spectroscopy reveal the critical role of copper sites in the adsorption and activation of NO 2 molecules, with the formation of {Cu(I)···NO} and {Cu···NO 2 } adducts promoting the conversion of NO 2 to N 2 . This study will inspire the further design and study of new efficient single-atom catalysts for NO 2 abatement via detailed unravelling of their role in catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pore Distortion in a Metal–Organic Framework for Regulated Separation of Propane and Propylene

The development of porous solids for adsorptive separation of propylene and propane remains an important and challenging line of research. State-of-the-art sorbent materials often suffer from the trade-off between adsorption capacity and selectivity. Here, we report the regulated separation of propylene and propane in a metal–organic framework via designed pore distortion. Here, the distorted pore structure of HIAM-301 successfully excludes propane and thus achieved simultaneously high selectivity (>150) and large capacity (~3.2 mmol/g) of propylene at 298 K and 1 bar. Dynamic breakthrough measurements validated the excellent separation of propane and propylene. In situ neutron powder diffraction and inelastic neutron scattering revealed the binding domains of adsorbed propylene molecules in HIAM-301 as well as host–guest interaction dynamics. This study presents a new benchmark for the adsorptive separation of propylene and propane.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Direct Observation of Ammonia Storage in UiO-66 Incorporating Cu(II) Binding Sites

The presence of active sites in metal–organic framework (MOF) materials can control and affect their performance significantly in adsorption and catalysis. However, revealing the interactions between the substrate and active sites in MOFs at atomic precision remains a challenging task. Here, we report the direct observation of binding of NH 3 in a series of UiO-66 materials containing atomically dispersed defects and open Cu(I) and Cu(II) sites. While all MOFs in this series exhibit similar surface areas (1111–1135 m 2 g –1 ), decoration of the -OH site in UiO-66-defect with Cu(II) results in a 43% enhancement of the isothermal uptake of NH 3 at 273 K and 1.0 bar from 11.8 in UiO-66-defect to 16.9 mmol g –1 in UiO-66-Cu II . A 100% enhancement of dynamic adsorption of NH 3 at a concentration level of 630 ppm from 2.07 mmol g –1 in UiO-66-defect to 4.15 mmol g –1 in UiO-66-Cu II at 298 K is observed. In situ neutron powder diffraction, inelastic neutron scattering, and electron paramagnetic resonance, solid-state nuclear magnetic resonance, and infrared spectroscopies, coupled with modeling reveal that the enhanced NH 3 uptake in UiO-66-Cu II originates from a {Cu(II)···NH 3 } interaction, with a reversible change in geometry at Cu(II) from near-linear to trigonal coordination. This work represents the first example of structural elucidation of NH 3 binding in MOFs containing open metal sites and will inform the design of new efficient MOF sorbents by targeted control of active sites for NH 3 capture and storage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and Characterization of Core-Shell Cu-Ru, Cu-Rh, and Cu-Ir Nanoparticles

Optimizing the use of expensive precious metals is critical to developing sustainable and low-cost processes for heterogeneous catalysis or electrochemistry. Here, we report a synthesis method that yields core-shell Cu-Ru, Cu-Rh, and Cu-Ir nanoparticles with the platinum-group metals segregated on the surface. The synthesis of Cu-Ru, Cu-Rh, and Cu-Ir particles allows maximization of the surface area of these metals and improves catalytic performance. Furthermore, the Cu core can be selectively etched to obtain nanoshells of the platinum-group metal components, leading to a further increase in the active surface area. Characterization of the samples was performed with X-ray absorption spectroscopy, X-ray powder diffraction, and ex situ and in situ transmission electron microscopy. CO oxidation was used as a reference reaction: the three core-shell particles and derivatives exhibited promising catalyst performance and stability after redox cycling. Furthermore, these results suggest that this synthesis approach may optimize the use of platinum-group metals in catalytic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

As–Se Pentagonal Linkers to Induce Chirality and Polarity in Mixed-Valent Fe–Se Tetrahedral Chains Resulting in Hidden Magnetic Ordering

A novel mixed-valent hybrid chiral and polar compound, Fe 7 As 3 Se 12 (en) 6 (H 2 O), has been synthesized by a single-step solvothermal method. The crystal structure consists of 1D [Fe 5 Se 9 ] chains connected via [As 3 Se 2 ]–Se pentagonal linkers and charge-balancing interstitial [Fe(en) 3 ] 2+ complexes (en = ethylenediamine). Neutron powder diffraction verified that interstitial water molecules participate in the crystal packing. Magnetic polarizability of the produced compound was confirmed by X-ray magnetic circular dichroism (XMCD) spectroscopy. X-ray absorption spectroscopy (XAS) and 57 Fe Mössbauer spectroscopy showed the presence of mixed-valent Fe 2+ /Fe 3+ in the Fe–Se chains. Magnetic susceptibility measurements reveal strong antiferromagnetic nearest neighbor interactions within the chains with no apparent magnetic ordering down to 2 K. Hidden short-range magnetic ordering below 70 K was found by 57 Fe Mössbauer spectroscopy, showing that a fraction of the Fe 3+ /Fe 2+ in the chains are magnetically ordered. Nevertheless, complete magnetic ordering is not achieved even at 6 K. Analysis of XAS spectra demonstrates that the fraction of Fe 3+ in the chain increases with decreasing temperature. Computational analysis points out several competing ferrimagnetic ordered models within a single chain. Here, this competition, together with variation in the Fe oxidation state and additional weak intrachain interactions, is hypothesized to prevent long-range magnetic ordering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Node Distortion as a Tunable Mechanism for Negative Thermal Expansion in Metal–Organic Frameworks

Chemically functionalized series of metal–organic frameworks (MOFs), with subtle differences in local structure but divergent properties, provide a valuable opportunity to explore how local chemistry can be coupled to long-range structure and functionality. Using in situ synchrotron X-ray total scattering, with powder diffraction and pair distribution function (PDF) analysis, we investigate the temperature dependence of the local- and long-range structure of MOFs based on NU-1000, in which Zr 6 O 8 nodes are coordinated by different capping ligands (H 2 O/OH, Cl – ions, formate, acetylacetonate, and hexafluoroacetylacetonate). We show that the local distortion of the Zr 6 nodes depends on the lability of the ligand and contributes to a negative thermal expansion (NTE) of the extended framework. Using multivariate data analyses, involving non-negative matrix factorization (NMF), we demonstrate a new mechanism for NTE: progressive increase in the population of a smaller, distorted node state with increasing temperature leads to global contraction of the framework. The transformation between discrete node states is noncooperative and not ordered within the lattice, i.e., a solid solution of regular and distorted nodes. Density functional theory calculations show that removal of ligands from the node can lead to distortions consistent with the Zr···Zr distances observed in the experiment PDF data. Control of the node distortion imparted by the nonlinker ligand in turn controls the NTE behavior. Furthermore, these results reveal a mechanism to control the dynamic structure of MOFs based on local chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Structure of Boron Monoxide

Boron monoxide (BO), prepared by the thermal condensation of tetrahydroxydiboron, was first reported in 1955; however, its structure could not be determined. With the recent attention on boron-based two-dimensional materials, such as borophene and hexagonal boron nitride, there is renewed interest in BO. A large number of stable BO structures have been computationally identified, but none are supported by experiments. The consensus is that the material likely forms a boroxine-based two-dimensional material. Herein, we apply advanced 11 B NMR experiments to determine the relative orientations of B(B)O 2 centers in BO. We find that the material is composed of D 2h -symmetric O 2 B–BO 2 units that organize to form larger B 4 O 2 rings. Further, powder diffraction experiments additionally reveal that these units organize to form two-dimensional layers with a random stacking pattern. This observation is in agreement with earlier density functional theory (DFT) studies that showed B 4 O 2 -based structures to be the most stable.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interplanar Ferromagnetism Enhanced Ultrawide Zero Thermal Expansion in Kagome Cubic Intermetallic (Zr,Nb)Fe 2

A cubic metal exhibiting zero thermal expansion (ZTE) over a wide temperature window demonstrates significant applications in a broad range of advanced technologies but is extremely rare in nature. Here, enabled by high-temperature synthesis, we realize tunable thermal expansion via magnetic doping in the class of kagome cubic (Fd-3m) intermetallic (Zr,Nb)Fe 2 . A remarkably isotropic ZTE is achieved with a negligible coefficient of thermal expansion (+0.47 x 10 -6 K -1 ) from 4 to 425 K, almost wider than most ZTE in metals available. A combined in situ magnetization, neutron powder diffraction, and hyperfine Mössbauer spectrum analysis reveals that interplanar ferromagnetic ordering contributes to a large magnetic compensation for normal lattice contraction upon cooling. Trace Fe-doping introduces extra magnetic exchange interactions that distinctly enhance the ferromagnetism and magnetic ordering temperature, thus engendering such an ultrawide ZTE. Finally, this work presents a promising ZTE in kagome metallic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗