Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface additives”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Evaluation of advanced lubricants for aircraft applications using gear surface fatigue tests

Surface pitting fatigue life tests were conducted with five lubricants, using spur gears made from a single lot of consumable-electrode vacuum melted (CVM) AISI 9310 steel. The gears were case carbonized and hardened to a Rockwell c-60 and finish ground. The gear pitch diameter was 8.89 cm. The lot of gears was divided into five groups, each of which was tested with a different lubricant. The test lubricants can be classified as synthetic polyol-esters with various viscosities and additive packages. Test conditions included bulk gear temperature of 350 K, a maximum Hertz stress of 1.71 GPa (248 ksi) at the pitch line, and a speed of 10,000 RPM. The lubricant with a viscosity that provided a specific film thickness greater than one and with an additive package produced far greater gear surface fatigue lives than lubricants with a viscosity that provided specific film thickness less than one. A low viscosity lubricant with an additive package produced gear surface fatigue lives equivalent to a similar base stock lubricant with 30 percent higher viscosity, but without an additive package. Lubricants with the same viscosity and similar additive packages gave equivalent gear surface fatigue lives.

Townsend, Dennis P.↗
DOE OSTI2026

Locating the atoms at the hard-soft interface of gold nanoparticles

Surface structure affects the growth, shape and properties of nanoparticles. In wet chemical syntheses, metal additives and surfactants are used to modify surfaces and guide nanocrystal growth. To understand this process, it is critical to understand how the surface structure, and hence its energy, is modified. However, measuring the type and arrangement of atoms at hard-soft interfaces on nanoscale surfaces, especially in the presence of surfactants, is extremely challenging. Here, we determine the atomic structure of the hard-soft interface in a metallic nanoparticle by developing low-dose imaging conditions in four-dimensional scanning transmission electron microscopy that are preferentially sensitive to surface adatoms. By revealing experimentally the copper additives and bromide surfactant counterion at the surface of a gold nanocuboid and quantifying their interatomic distances, our direct, low-dose imaging method provides atomic-level understanding of chemically sophisticated nanomaterial surface structures. These measurements of the atomic structure of the hard-soft interface provide the information necessary to understand and quantify surface chemistries and energies and their pivotal role in nanocrystal growth.

Li, Weilun [Monash University, Melbourne, VIC (Aus↗
DOE OSTI2017

Properties of Veneered Flat Pressed Wood Plastic Composites by One-Step Process Pressing

The aim of this study was to develop, manufacture and determine properties of veneer overlaid flat pressed wood plastic composite (WPC) panels from recycled low density polyethylene (rLDPE), wood particles and different kinds of veneer (rotary-cut birch veneer and sliced oak veneer) using various adhesives by one-step hot pressing. Food packaging polyethylene film (PE film) as recycled stretch wraps, recycled low density polyethylene (rLDPE) particles and phenol formaldehyde (PF) resin were applied as adhesive for the bonding of veneer to the surface of WPC. No modification additives were used for the manufacture of WPC. It was found that compared with non-veneered WPC, the panels sandwiched with natural veneers greatly improved their properties. The bending strength was improved in 1.9–2.6 and 7.9–10 times across and along veneer fibers respectively for both types of investigated veneer. The highest values of bending strength were observed in WPC panels veneered with rotary-cut birch veneer. However, the water resistance of veneered WPC panels was reduced in comparison with non-veneered. The WPC specimens veneered with both types of veneer using PE film had better mechanical properties and water resistance than those of the specimens made with other two types of adhesives. The veneering of WPC panels enables to significantly improve adhesion properties of these veneered surfaces for their further finishing. In addition, the veneering of WPC panels hides the surface defects and provides a uniform application of different paints, varnishes and films to the surface of such materials. Overlaying WPC panels with wood veneers improves their appearance and properties resulting in eco-friendly value-added products.

36 MATERIALS SCIENCE↗
NASA NTRS1983

Mn-53 profiles in four Apollo surface cores

Mn-53 data are presented for four Apollo cores with an emphasis on the past 10-to-the-7th-year history of these samples: (1) Core 15011 has excess Mn-53 down to a depth of at least 9 cm, which is probably due to the continuous addition of near-surface irradiated material. (2) The Mn-53 profile for 64002 above 12 cm is relatively flat and in excess of that calculated for a static core, which suggests that the upper part of this core was deposited rapidly about 2 m.y. ago. (3) Results for the Apollo 17 drill stem show a large excess of Mn-53 from at least 3 cm downwards. Some magnetic separates obtained from this core have very high Mn-53 activities, probably due to the presence of agglutinates that were recently irradiated very near the surface. (4) The Mn-53 content of the upper part of 74002 is similar to that of trench samples collected nearby and indicates that the gray, orange, and black soils at this site have been exposed together near the surface for at least the last 10 m.y.

Nishiizumi, K.↗
NASA NTRS2002

Surface Enhancement Improves Crack Resistance

The low plasticity burnishing (LPB) process produces a deep layer of surface compression in a quick and affordable manner to produce metal surfaces free of scratches, nicks, and gouges. The process, designed for easy inclusion in the manufacturing environment, can be performed with conventional Computer Numerical Control machine tools. This allows parts to be processed during manufacturing, rather than as a post process in a separate facility. A smooth, free-rolling spherical ball suspended in a fluid allows for single-point contact. The ball comes into mechanical contact only with the surface to be burnished, and can be moved in any direction. LPB can be applied to all types of carbon and alloy steel, stainless steel, cast iron, aluminum, titanium, and nickel- based super alloys. In addition to improving a surface's resistance to fatigue and damage, treatment stops the growth of shallow cracks. The LPB process is used on the leading edges of turbine blades to improve resistance to foreign object damage and crack growth. This means significant savings for aircraft owners, since maintenance requirements to inspect for fatigue damage, replace parts, and remove corrosion damage increase the cost of operation.

Source record↗
DOE OSTI2023

PotLib 2023: New version of a potential energy surface library for chemical systems

POTLIB is a library of global and semiglobal potential energy surface subprograms. The library currently features 410 entries, including both single-state entries and multi-state entries. When one calls the routine of a single-state entry, it returns the ground-electronic-state adiabatic potential energy surface at the input geometry. In addition, some entries also return the gradient of the surface. Further, when one calls a multi-state entry, it returns a diabatic potential energy matrix (DPEM). If the entry also has the gradient of the DPEM, one can compute adiabatic surfaces, their gradients, and the nonadiabatic coupling vectors (NACs) from the DPEM and its gradient by diagonalization. Some but not all the routines conform to one of a set of standard interfaces. The goal is to facilitate chemical dynamics research by collecting and disseminating a comprehensive collection of state-of-the-art potential energy routines (developed by a wide, international group of researchers) with systematic and well-defined interfaces for use with chemical dynamics programs. Systems in the library include CHArO 2 , CHN 2 O + , CH 2 O, CH 2 O 2 , CH 3 N 2 , CH 3 O, CH 4 , CH 4 Br, CH 4 Cl, CH 4 F, CH 4 O, CH 4 OCl, CH 4 OF, CH 4 OH, CH 5 , CH$^{+}_{5}$, CH 5 N, CH 5 O 2 , CH 8 O 2 , C 2 H 2 N 2 O, C 2 H 2 O, C 2 H 4 N, C 2 H 4 O 4 , C 2 H 6 Cl, C 2 H 6 F, C 2 H 6 H, C 2 H 6 O, C 2 H 6 OH, C 2 H 7 , C 2 O 2 , C 3 H 4 O 2 , C 3 H 7 NO, C 6 H 6 O, C 6 H 6 S, C 7 H8S, HBrCl, HCl 2 , HF 2 , HI 2 , HLiF, HNaF, HO 2 , HO 3 , HOBr, HSiO, H 2 Br, H 2 ClO, H 2 F, H 2 F 2 , H 2 FO, H 2 Na, H 2 O, H 2 O 2 , H 2 OBr, H 3 , H 3 Cl, H 3 ClN, H 3 ClO, H 3 N, H 3 O, H 3 O 2 , H$^{+}_{3}$, H 3 S, H 4 ClSi, H 4 N, H 4 NO, H 4 O 2 , H 5 GeO, H 5 Si, H$^{+}_{7}$, Al m H n , Al n , Ar N O, K 2 Rb 2 , NO 2 , N 2 O, N 2 O 2 , N 3 , N 4 , O 3 , and O 4 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Understanding anisotropic growth of Au penta-twinned nanorods by liquid cell transmission electron microscopy

Morphology control of anisotropic metal nanocrystals plays an important role in tuning shape-dependent physicochemical properties for various applications, but underlying understanding of their anisotropic growth mechanism remains a great challenge. Here, we investigate the formation of Au penta-twinned nanorod by in situ liquid cell transmission electron microscopy (LC-TEM). It is found that a truncated-decahedron forms in the absence of cetyl-trimethyl ammonium bromide (CTAB), whereas in the presence of CTAB a reentrant groove appears in decahedron to relieve strain during the nanorod formation, which induces the formation of {100} facets. The growth dynamics of penta-twinned nanorod implies that CTAB molecules can promote the nanorod growth by selectively inhibiting atom addition to {100} facets. Density functional theory (DFT) simulations confirm that the partial relieve of strain energy of decahedron nanoparticle is caused by the adsorption of Br- ions. Moreover, the selective adsorption of CTAB lowers the surface energy of {100} facets, resulting in the nanorod growth along the [110] direction. Based on the appearance of reentrant groove and growth dynamics unraveled by LC-TEM, the synergy of strain and surface energy tuning by additives is discovered. The study provides an in-depth insight into the anisotropic growth of nanorods and lays foundations for controlled synthesis of nano-materials.

Jin, Biao↗
DOE OSTI2018

Self-assembly of Janus Dumbbell Nanocrystals and Their Enhanced Surface Plasmon Resonance

Self-assembly is a critical process that can greatly expand the existing structures and lead to new functionality of nanoparticle systems. Multicomponent superstructures self-assembled from nanocrystals have shown promise as multifunctional materials for various applications. Despite recent progress in assembly of homogeneous nanocrystals, synthesis and self-assembly of Janus nanocrystals with contrasting surface chemistry remains a significant challenge. Herein, we designed a novel Janus nanocrystal platform to control the self-assembly of nanoparticles in aqueous solutions by balancing the hydrophobic and hydrophilic moieties. A series of superstructures have been assembled by systematically varying the Janus balance and assembly conditions. Janus Au–Fe 3 O 4 dumbbell nanocrystals (<20 nm) were synthesized with the hydrophobic ligands coated on the Au lobe and negatively charged hydrophilic ligands coated on the Fe 3 O 4 lobe. We systematically fine-tune the lobe size ratio, surface coating, external conditions, and even additional growth of Au nanocrystal domains on the Au lobe of dumbbell nanoparticles (Au–Au–Fe 3 O 4 ) to harvest self-assembly structures including clusters, chains, vesicles, and capsules. It was discovered that in all these assemblies the hydrophobic Au lobes preferred to stay together. In addition, these superstructures clearly demonstrated different levels of enhanced surface plasmon resonance that is directly correlated with the Au coupling in the assembly structure. The strong interparticle plasmonic coupling displayed a red-shift in surface plasmon resonance, with larger structures formed by Au–Au–Fe 3 O 4 assembly extending into the near-infrared region. Self-assembly of Janus dumbbell nanocrystals can also be reversible under different pH values. In conclusion, the biphasic Janus dumbbell nanocrystals offer a platform for studying the novel interparticle coupling and open up opportunities in applications including sensing, disease diagnoses, and therapy.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
NASA NTRS2001

MOLA-Based Landing Site Characterization

The Mars Global Surveyor (MGS) Mars Orbiter Laser Altimeter (MOLA) data provide the basis for site characterization and selection never before possible. The basic MOLA information includes absolute radii, elevation and 1 micrometer albedo with derived datasets including digital image models (DIM's illuminated elevation data), slopes maps and slope statistics and small scale surface roughness maps and statistics. These quantities are useful in downsizing potential sites from descent engineering constraints and landing/roving hazard and mobility assessments. Slope baselines at the few hundred meter level and surface roughness at the 10 meter level are possible. Additionally, the MOLA-derived Mars surface offers the possibility to precisely register and map project other instrument datasets (images, ultraviolet, infrared, radar, etc.) taken at different resolution, viewing and lighting geometry, building multiple layers of an information cube for site characterization and selection. Examples of direct MOLA data, data derived from MOLA and other instruments data registered to MOLA arc given for the Hematite area.

Duxbury, T. C.↗
NASA NTRS2002

Enlargement of Step-Free SiC Surfaces by Homoepitaxial Web-Growth of Thin SiC Cantilevers

Lateral homoepitaxial growth of thin cantilevers emanating from mesa patterns that were reactive ion etched into on-axis commercial SiC substrates prior to growth is reported. The thin cantilevers form after pure stepflow growth removes almost all atomic steps from the top surface of a mesa, after which additional adatoms collected by the large step-free surface migrate to the mesa sidewall where they rapidly incorporate into the crystal near the top of the mesa sidewall. The lateral propagation of the step-free cantilevered surface is significantly affected by pregrowth mesa shape and orientation, with the highest lateral expansion rates observed at the inside concave comers of V-shaped pregrowth mesas with arms lengthwise oriented along the {1100} direction. Complete spanning of the interiors of V's and other mesa shapes with concave comers by webbed cantilevers was accomplished. Optical microscopy, synchrotron white beam x-ray topography and atomic force microscopy analysis of webbed regions formed over a micropipe and closed-core screw dislocations show that c-axis propagation of these defects is terminated by the webbing. Despite the nonoptimized process employed in this initial study, webbed surfaces as large as 1.4 x 10(exp -3) square centimeters, more than four times the pregrowth mesa area, were grown. However, the largest webbed surfaces were not completely free of bilayer steps, due to unintentional growth of 3C-SiC that occurred in the nonoptimized process. Further process optimization should enable larger step-free webs to be realized.

Neudeck, Philip G.↗
NASA NTRS2011

Validation of Proposed Metrics for Two-Body Abrasion Scratch Test Analysis Standards

The objective of this work was to evaluate a set of standardized metrics proposed for characterizing a surface that has been scratched from a two-body abrasion test. This is achieved by defining a new abrasion region termed Zone of Interaction (ZOI). The ZOI describes the full surface profile of all peaks and valleys, rather than just measuring a scratch width as currently defined by the ASTM G 171 Standard. The ZOI has been found to be at least twice the size of a standard width measurement, in some cases considerably greater, indicating that at least half of the disturbed surface area would be neglected without this insight. The ZOI is used to calculate a more robust data set of volume measurements that can be used to computationally reconstruct a resultant profile for detailed analysis. Documenting additional changes to various surface roughness parameters also allows key material attributes of importance to ultimate design applications to be quantified, such as depth of penetration and final abraded surface roughness. Data are presented to show that different combinations of scratch tips and abraded materials can actually yield the same scratch width, but result in different volume displacement or removal measurements and therefore, the ZOI method is more discriminating than the ASTM method scratch width. Furthermore, by investigating the use of custom scratch tips for our specific needs, the usefulness of having an abrasion metric that can measure the displaced volume in this standardized manner, and not just by scratch width alone, is reinforced. This benefit is made apparent when a tip creates an intricate contour having multiple peaks and valleys within a single scratch. This work lays the foundation for updating scratch measurement standards to improve modeling and characterization of three-body abrasion test results.

Kobrick, Ryan L.↗
NASA NTRS2013

Validation of Proposed Metrics for Two-Body Abrasion Scratch Test Analysis Standards

Abrasion of mechanical components and fabrics by soil on Earth is typically minimized by the effects of atmosphere and water. Potentially abrasive particles lose sharp and pointed geometrical features through erosion. In environments where such erosion does not exist, such as the vacuum of the Moon, particles retain sharp geometries associated with fracturing of their parent particles by micrometeorite impacts. The relationship between hardness of the abrasive and that of the material being abraded is well understood, such that the abrasive ability of a material can be estimated as a function of the ratio of the hardness of the two interacting materials. Knowing the abrasive nature of an environment (abrasive)/construction material is crucial to designing durable equipment for use in such surroundings. The objective of this work was to evaluate a set of standardized metrics proposed for characterizing a surface that has been scratched from a two-body abrasion test. This is achieved by defining a new abrasion region termed Zone of Interaction (ZOI). The ZOI describes the full surface profile of all peaks and valleys, rather than just measuring a scratch width. The ZOI has been found to be at least twice the size of a standard width measurement; in some cases, considerably greater, indicating that at least half of the disturbed surface area would be neglected without this insight. The ZOI is used to calculate a more robust data set of volume measurements that can be used to computationally reconstruct a resultant profile for de tailed analysis. Documenting additional changes to various surface roughness par ameters also allows key material attributes of importance to ultimate design applications to be quantified, such as depth of penetration and final abraded surface roughness. Further - more, by investigating the use of custom scratch tips for specific needs, the usefulness of having an abrasion metric that can measure the displaced volume in this standardized manner, and not just by scratch width alone, is reinforced. This benefit is made apparent when a tip creates an intricate contour having multiple peaks and valleys within a single scratch. The current innovation consists of a software- driven method of quantitatively evaluating a scratch profile. The profile consists of measuring the topographical features of a scratch along the length of the scratch instead of the width at one location. The digitized profile data is then fed into software code, which evaluates enough metrics of the scratch to reproduce the scratch from the evaluated metrics. There are three key differences between the current art and this innovation. First, scratch width does not quantify how far from the center of the scratch damage occurs (ZOI). Second, scratch width does not discern between material displacement and material removal from the scratch. Finally, several scratches may have the same width but different zones of interactions, different displacements, and different material removals. The current innovation allows quantitative assessment of all three.

Street, Kenneth W., Jr.↗
NASA NTRS2015

Mars Atmospheric Characterization Using Advanced 2-Micron Orbiting Lidar

Mars atmospheric characterization is critical for exploring the planet. Future Mars missions require landing massive payloads to the surface with high accuracy. The accuracy of entry, descent and landing (EDL) of a payload is a major technical challenge for future Mars missions. Mars EDL depends on atmospheric conditions such as density, wind and dust as well as surface topography. A Mars orbiting 2-micron lidar system is presented in this paper. This advanced lidar is capable of measuring atmospheric pressure and temperature profiles using the most abundant atmospheric carbon dioxide (CO2) on Mars. In addition Martian winds and surface altimetry can be mapped, independent of background radiation or geographical location. This orbiting lidar is a valuable tool for developing EDL models for future Mars missions.

Singh, U.↗
DOE OSTI2022

Ferroelectric Ordering in Nanosized PbTiO 3

The insight into the three-dimensional configuration of ferroelectric ordering in ferroelectric nanomaterials is motivated by the application of the development of functional nanodevices and the structural designing. However, the atomic deciphering of the spatial distribution of ordered structure remains challenging for the limitation of dimension and probing techniques. Here, in this paper, a neutron pair distribution function (nPDF) was utilized to analyze the spontaneous polarization distribution of zero-dimensional PbTiO 3 nanoparticles in three dimensions, via the application of reverse Monte Carlo (RMC) modeling. The comprehensive identification with transmission electron microscopy verified the linear characteristics of polarization along the c-axis in the main body, while electric polarization distribution on the surface was enhanced abnormally. In addition, the correlation of dipole vectors extending to three unit cells below the surface is retained. This work shows an application of the micro/macroscale information to effectively decode the polarization structure of nanoferroelectrics, providing new views of designing nanoferroelectric devices.

36 MATERIALS SCIENCE↗