Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface layering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

Reflectance and transmittance of snow at high spectral resolution

A radiative-transfer model for the bidirectional reflectance-distribution function (BRDF) shows that snow is moderately anisotropic in the NIR wavelengths. Although the directional-hemispherical albedo of snow decreases as the grains become larger, the forward scattering also increases, with the result that the illumination and viewing geometry must be considered when interpreting physical properties of the surface layer of the snow pack from remote sensing data. Measurements of the BRDF and the transmittance for a variety of snow conditions were made throughout the winter and spring seasons with an SE-590 spectroradiometer, for wavelengths from 0.38 to 1.11 microns. Coincident with these, the surface grain properties were analyzed by stereological methods. A sphere with the same surface-to-volume ratio as the ice grains is used as the equivalent sphere.

Dozier, Jeff↗

Probing the Atomic-Scale Structure of Amorphous Aluminum Oxide Grown by Atomic Layer Deposition

Atomic layer deposition (ALD) is a well-established technique for depositing nanoscale coatings with pristine control of film thickness and composition. The trimethylaluminum (TMA) and water (H 2 O) ALD chemistry is inarguably the most widely used and yet to date, we have little information about the atomic-scale structure of the amorphous aluminum oxide (AlO x ) formed by this chemistry. This lack of understanding hinders our ability to establish process-structure-property relationships and ultimately limits technological advancements employing AlOx made via ALD. In this work, we employ synchrotron high-energy X-ray diffraction (HE-XRD) coupled with pair distribution function (PDF) analysis to characterize the atomic structure of amorphous AlO x ALD coatings. We combine ex situ and in operando HE-XRD measurements on ALD AlO x and fit these experimental data using stochastic structural modeling to reveal variations in the Al-O bond length, Al and O coordination environment, and extent of Al vacancies as a function of growth conditions. In particular, the local atomic structure of ALD AlO x is found to change with the substrate and number of ALD cycles. The observed trends are consistent with the formation of bulk Al 2 O 3 surrounded by an O-rich surface layer. We deconvolute these data to reveal atomic-scale structural information for both the bulk and surface phases. Overall, this work demonstrates the usefulness of HE-XRD and PDF analysis in improving our understanding of the structure of amorphous ALD thin films and provides a pathway to evaluate how process changes impact the structure and properties of ALD films.

36 MATERIALS SCIENCE↗

Characterizing model uncertainties in simulated coast-to-offshore wind over the northeast U.S. using multi-platform measurements from the TCAP field campaign

Numerical weather prediction (NWP) models, such as the Weather Research and Forecasting (WRF) model, are widely used to provide estimates of the offshore wind energy resource owing to their large spatial coverage compared to available observations. Nevertheless, spatiotemporal distribution of model biases is highly dependent on factors including model configuration, location, and the interplay of multi-scale physical processes. Here, in this study, we focus on the characterization of model uncertainties in simulated coast-to-offshore winds over the northeast U.S., by varying sea surface temperature (SST) forcings, surface layer (SL) and planetary boundary layer (PBL) parameterizations, as well as identifying biases that may be directly passed from initial and boundary conditions. Multiple measurements, including aircraft data collected during the U.S. Department of Energy's Two-Column Aerosol Project (TCAP) experiment, are used to constrain the model results and facilitate quantitative comparisons. Our analysis indicates while SST forcing has notable impacts on simulated air temperature and moisture within PBL, the modeled winds are in general more sensitive to the choices of SL and PBL physics than to SST. The model’s forcing data not only controls the vertical dependence of wind speed errors, but also alters regional variability in wind speed’s spatial correlation. Bias comparisons between ERA5 reanalysis and ensemble simulations revealed significant similarity, particularly in wind speed biases during winter, underscoring their dependency on initial and boundary conditions. Coastal and offshore near-surface wind speed biases tend to exhibit much higher similarity in winter than in summer due to the presence of much stronger and more persistent synoptic wind conditions. This study highlights the importance of accurate atmospheric forcing and parameterization choices in improving wind forecasts and suggests the potential for extrapolating coastal wind biases to offshore locations, aiding wind energy forecasting and informing the Wind Forecast Improvement Project-3 (WFIP3).

17 WIND ENERGY↗

Morning Martian Atmospheric Temperature Gradients and Fluctuations Observed by Mars Pathfinder

We have studied the most prominent atmospheric temperature fluctuations observed during Martian mornings by Mars Pathfinder and have concluded, based on comparisons with wind directions, that they appear to be a result of atmospheric heating associated with the Lander spacecraft. Also, we have examined the morning surface layer temperature lapse rates, which are found to decrease as autumn approaches at the Pathfinder location, and which have mean (and median) values as large as 7.3 K/m in the earlier portions of the Pathfinder landed mission. It is plausible that brief isolated periods with gradients twice as steep are associated with atmospheric heating adjacent to Lander air bag material. In addition, we have calculated the gradient with height of the structure function obtained with Mars Pathfinder, for Mars' atmospheric temperatures measured within about 1.3 m from the surface, assuming a power law dependence, and have found that these gradients superficially resemble those reported for the upper region of the terrestrial stable boundary layer.

Mihalov, John D.↗

Adsorption of neodymium, dysprosium, and ytterbium to goethite under varying aqueous chemistry conditions [dataset]

The adsorption of rare earth elements (REEs) to iron oxides can regulate the mobility of REEs in the environment and is heavily influenced by water chemistry. This study utilized batch experiments to examine the adsorption of Nd, Dy, and Yb to goethite under varying pH, electrolyte (type and concentration), and concentrations of dissolved inorganic carbon and citrate. REE adsorption was strongly influenced by pH, with an increase from essentially no adsorption at pH 3.0 to nearly complete adsorption at pH 6.5 and higher. Citrate enhanced the adsorption of REEs at low pH (< 5.0), likely by forming goethite-REE-citrate ternary surface complexes. However, citrate inhibited the adsorption of REEs at higher pH (> 5.0) by forming aqueous REE-citrate complexes. Ionic strength had a small influence on REE adsorption, and the presence of dissolved inorganic carbon had no discernible effect. Equilibrium adsorption was interpreted with a triple layer surface complexation model (SCM). The selection of surface complexation reactions was guided by extended X-ray absorption fine structure spectra. A SCM with a single bidentate inner-sphere surface complexation reaction for Nd and two inner-sphere surface complexation reactions (one monodentate and one bidentate reaction) for Dy and Yb effectively simulated adsorption across a broad range of conditions in the absence of citrate. Accounting for the effects of citrate on REE adsorption required the addition of up to two ternary REE-citrate-goethite surface complexes. The SCM can enable predictions of REE transport in subsurface environments that have goethite as an important adsorbent mineral. This predictive capability could contribute to identifying potential REE sources and facilitating efficient extraction of REEs.

58 GEOSCIENCES↗

Version 2 Goddard Satellite-Based Surface Turbulent Fluxes (GSSTF2)

The global air-sea fluxes of momentum, latent and sensible heat, radiation, and freshwater (precipitation-evaporation) are required for driving Ocean models and validating coupled ocean- atmosphere global models. Wind stress is the major forcing for driving the oceanic circulation, while evaporation is a key component of hydrological cycle and surface heat budget. We have produced a 13.5-year (July 1987-December 2000) dataset containing daily, monthly, and climatological surface fluxes of momentum, latent and sensible heat over the global Oceans from the Special Sensor Microwave/Imager (SSM/I) radiance easurements. This dataset is called version 2 Goddard Satellite-based Surface Turbulent Fluxes (GSSTF-2). The GSSW-2 has a spatial resolution of 1.0deg x 1.0deg lat-long. In addition, evaporation has been combined with the satellite-retrieved precipitation to produce monthly freshwater fluxes over the global Ocean for the same period. Daily turbulent fluxes are derived from the S S M surface winds and surface air humidity, and 2-m air and sea surface temperatures (SST) of the NCEP/NCAR reanalysis, using an improved stability-dependent bulk flux algorithm based on the surface layer similarity theory. Hourly fluxes computed from the GSSTF-2 bulk flux algorithm using the observed hourly input variables validate well against those of ten experiments observed by the research ships over the tropical and midlatitude oceans. In addition, daily wind stresses, latent heat fluxes, wind speeds, surface air humidity and SSTs of the GSSTF-2 compare reasonably well with those of the collocated in situ measurements of the ten experiments. The global distributions of 1988-2000 annual- and seasonal-mean turbulent fluxes show reasonable patterns related to the atmospheric general circulation and its seasonal variations. The comparison of zonally-averaged wind stress and latent heat fluxes of the GSSTF-2 with those of other satellite products as well as the NCEPNCAR and ECMWF reanalyses for the annual mean and seasonal variations during 1992-93 will be discussed. .

Chou, Shu-Hsien↗

An experimental investigation of turbulent boundary layers along curved surfaces

A curved wall tunnel was designed, and an equilibrium turbulent boundary layer was set up on the straight section preceding the curved test section. Turbulent boundary layer flows with uniform and adverse pressure distributions along convex and concave walls were investigated. Hot-wire measurements along the convex surface indicated that turbulent mixing between fluid layers was very much reduced. However, the law of the wall held and the skin friction, thus determined, correlated well with other measurements. Hot-wire measurements along the concave test wall revealed a system of longitudinal vortices inside the boundary layer and confirmed that concave curvature enhances mixing. A self-consistent set of turbulent boundary layer equations for flows along curved surfaces was derived together with a modified eddy viscosity. Solution of these equations together with the modified eddy viscosity gave results that correlated well with the present data on flows along the convex surface with arbitrary pressure distribution. However, it could only be used to predict the mean characteristics of the flow along concave walls because of the existence of the system of longitudinal vortices inside the boundary layer.

So, R. M. C.↗

Finishing and Inspection of Model Surfaces for Boundary Layer Transition Tests

Techniques which have been used for finishing and quantitatively specifying surface roughness on boundary-layer-transition models are reviewed. The appearance of a surface as far as roughness is concerned can be misleading when viewed either by the eye or with the aid of a microscope. The multiple-beam interferometer and the wire shadow method provide the best simple means of obtaining quantitative measurements.

Wilkins, Max E.↗

Identification and Distribution of Vanadinite (Pb[subscript 5](V[superscript 5+]O[subscript 4])[subscript 3]Cl) in Lead Pipe Corrosion By-Products

This study presents the first detailed look at vanadium (V) speciation in drinking water pipe corrosion scales. A pool of 34 scale layers from 15 lead or lead-lined pipes representing eight different municipal drinking water distribution systems in the Northeastern and Midwestern portions of the United States were examined. Diverse synchrotron-based techniques, including bulk XANES (X-ray absorption near edge spectroscopy), {mu}-XANES, {mu}-XRD (X-ray diffraction), and {mu}-XRF (X-ray fluorescence) mapping were employed along with traditional powder XRD, SEM-EDXA (scanning electron microscopy-energy dispersive X-ray analysis), and ICP-OES (inductively coupled plasma-optical emission spectrometry) to evaluate vanadium speciation and distribution in these deposits. Vanadinite (Pb{sub 5}(VO{sub 4}){sub 3}Cl) was positively identified, and occurred most frequently in the surface layers. Low V{sub tot} in these waters is likely the limiting factor in the abundance of vanadinite in the pipe scales, along with the existence of divalent lead. The occurrence of V in these samples as a discrete mineral is important because it is formed in the presence of very low concentrations of V in the finished water, it provides a mechanism to concentrate {mu}g{center_dot}L{sup -1} amounts of V from the water to near-percent levels in the pipe scales, and the robustness of V accumulation and release in response to water chemistry changes is likely different than it would be with a sorption accumulation mechanism. Extrapolation from limited existing water chemistry data in this study provides an estimate of {Delta}G{sub f}{sup o} for vanadinite as approximately -3443 kJ{center_dot}mol{sup -1}, or less, leading to a log K{sub s0} value of approximately -86 for the reaction Pb{sub 5}(VO{sub 4}){sub 3}CI{sub (s)}{r_reversible} {l_brace}Pb{sup 2+}{r_brace}{sup 5} + {l_brace}VO{sup 3-}{sub 4}{r_brace}{sup 3} + {l_brace}Cl{sup -}{r_brace}, in which {l_brace}{r_brace} denotes activity.

54 ENVIRONMENTAL SCIENCES↗

Adsorption of Neodymium, Dysprosium, and Ytterbium to Goethite under Varying Aqueous Chemistry Conditions

The adsorption of rare earth elements (REEs) to iron oxides can regulate the mobility of REEs in the environment and is heavily influenced by water chemistry. This study utilized batch experiments to examine the adsorption of Nd, Dy, and Yb to goethite under varying pH, electrolyte (type and concentration), and concentrations of dissolved inorganic carbon and citrate. REE adsorption was strongly influenced by pH, with an increase from essentially no adsorption at pH 3.0 to nearly complete adsorption at pH 6.5 and higher. Citrate enhanced the adsorption of REEs at low pH (<5.0), likely by forming goethite-REE-citrate ternary surface complexes. However, citrate inhibited the adsorption of REEs at higher pH (>5.0) by forming aqueous REE-citrate complexes. Ionic strength had a small influence on REE adsorption, and the presence of dissolved inorganic carbon had no discernible effect. Equilibrium adsorption was interpreted with a triple-layer surface complexation model (SCM). The selection of surface complexation reactions was guided by extended X-ray absorption fine structure spectra. An SCM with a single bidentate inner-sphere surface complexation reaction for Nd and two inner-sphere surface complexation reactions (one monodentate and one bidentate reaction) for Dy and Yb effectively simulated adsorption across a broad range of conditions in the absence of citrate. Accounting for the effects of citrate on REE adsorption required the addition of up to two ternary REE-citrate-goethite surface complexes. The SCM can enable predictions of REE transport in subsurface environments that have goethite as an important adsorbent mineral. Furthermore, this predictive capability could contribute to identifying potential REE sources and facilitating efficient extraction of REEs.

58 GEOSCIENCES↗

Dusty Plasma near the Martian Satellite Deimos

The formation of dusty plasma in the near-surface layer above the illuminated part of the Deimos, the satellite of Mars, due to photoelectric and electrostatic processes is analyzed. Using a physicomathematical model self-consistently describing the densities of photoelectrons and dust grains above the illuminated part of Deimos, the distribution function of photoelectrons near its surface is calculated and the altitude dependences of the electric field, as well as of the number density, charge, and size of dust grains, are determined. It is noted that, due to the lower gravity, substantially larger grains are lifted above the surface of Deimos compared to those lifted above the Moon’s surface. In this case, adhesion, which is believed to significantly hamper the detachment of dust grains from the lunar surface, plays a substantially smaller role on Deimos.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Reducing Sodium Contamination in MOS Devices

Method of removing positive ions from oxides in metal-oxide-semiconductor (MOS) transistors and intergrated circuits ensure freedom from contamination by sodium and other mobile positive ions. Electric field applied during oxide growth to push mobile Na + ions to surface. After cooling from growth temperature, field turned off and Na + contaminated surface layer etched away. New method intended to suplement established methods of minimizing ion contamination, such as scrupulous cleanliness in processing, purging with hydrogen chloride to react with and remove contaminants, and growing extra-thick gate oxide, then etching it to remove large portion of contaminants concentrated near surface.

Dehaye, R. F.↗

Isotope exchange in oxide-containing catalyst

A method of exchanging rare-isotope oxygen for common-isotope oxygen in the top several layers of an oxide-containing catalyst is disclosed. A sample of an oxide-containing catalyst is exposed to a flowing stream of reducing gas in an inert carrier gas at a temperature suitable for the removal of the reactive common-isotope oxygen atoms from the surface layer or layers of the catalyst without damaging the catalyst structure. The reduction temperature must be higher than any at which the catalyst will subsequently operate. Sufficient reducing gas is used to allow removal of all the reactive common-isotope oxygen atoms in the top several layers of the catalyst. The catalyst is then reoxidized with the desired rare-isotope oxygen in sufficient quantity to replace all of the common-isotope oxygen that was removed.

Robert V Hess↗

Radon Measurements of Atmospheric Mixing (RAMIX) 2006–2014 Final Campaign Summary

Uncertainty in vertical mixing between the surface layer, boundary layer, and free troposphere leads to large uncertainty in “top-down” estimates of regional land-atmosphere carbon exchange (i.e., estimates based on measurements of atmospheric CO2 mixing ratios. Radon-222 (222Rn) is a valuable tracer for measuring atmospheric mixing because it is emitted from the land surface and has a short enough half-life (3.8 days) to allow characterization of mixing processes based on vertical profile measurements.

Fischer, ML↗

Optimization of multi-layer front-contact grid patterns for solar cells

In a front-contact grid pattern for a solar cell there is a trade-off necessary between shadowing loss and excessive power loss due to voltage drop in the metalization itself. If the metalization is too little there may be excessive contact resistance to the underlying semiconductor and insufficient coverage to control losses in the thin front-surface layer of the solar cell. Optimization of grid pattern area and geometry is considered analytically to minimize total losses. Worthwhile performance advantages are shown to be possible, particularly in concentrator systems, if multi-layer grid patterns are used. The current carrying fingers should be approximately square in metal cross section and the main current feedout bars should not only be wider but also thicker than the primary collecting fingers. This is termed multi-level metalization. Effective use of multi-level grid metalization allows much greater concentration-to-loss ratio for a cell of large area and permits good performance from cells of high front-layer sheet resistance.

Flat, A.↗

Age of Martian Air: Time Scales for Martian Atmospheric Transport

The mean time since air in the Martian atmosphere was in the low-latitude boundary layer is examined using simulations of an idealized “mean age” tracer with the MarsWRF general circulation model. The spatial distribution and seasonality of the mean age in low- and mid-latitudes broadly follow contours of the mean meridional circulation, with the mean age increasing from 0 at the surface to a maximum of 60–100 sols in the upper atmosphere. Substantially older mean ages (exceeding 300 sols) are found in polar regions, with oldest ages in the lower atmosphere (10–100 Pa), above a near-surface layer with very young ages (around 20 sols). The annual maximum ages occur around the equinoxes, and the age in the polar lower atmosphere decreases during the autumn to winter transition. This autumn-winter decrease in age occurs because of mixing of polar and mid-latitude air when the polar vortex exhibits an annulus of high potential vorticity (PV) with a local minimum near the pole. There is no autumn-winter decrease and old ages persist throughout autumn and winter in simulations with CO2 phase changes disabled, and thus no latent heating, where there is a monopolar vortex (i.e., a monotonic increase in PV from equator to pole) forms. The altitudinal and seasonal variations in the mean age indicates similar variations in the transport of dust into polar regions and the mixing of polar air (with, e.g., low water vapor and high ozone concentrations during winter) into mid-latitudes.

Waugh, D. W.↗

Microstructure and magnetooptics of silicon oxide with implanted nickel nanoparticles

Metallic nickel nanoparticles of various sizes are formed in a thin near-surface layer in an amorphous SiO{sub 2} matrix during 40-keV Ni{sup +} ion implantation at a dose of (0.25-1.0) Multiplication-Sign 10{sup 17} ions/cm{sup 2}. The micro-structure of the irradiated layer and the crystal structure, morphology, and sizes of nickel particles formed at various irradiation doses are studied by transmission electron microscopy and electron diffraction. The magnetooptical Faraday effect and the magnetic circular dichroism in an ensemble of nickel nanoparticles are studied in the optical range. The permittivity {epsilon} tensor components are calculated for the implanted samples using an effective medium model with allowance for the results of magnetooptical measurements. The spectral dependences of the tensor {epsilon} components are found to be strongly different from those of a continuous metallic nickel film. These differences are related to a disperse structure of the magnetic nickel phase and to a surface plasma resonance in the metal nanoparticles.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗