Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface morphologies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

Structural Modification of Starch Nanoparticles Via Graft Copolymerization Using KMnO{sub 4}, HClO{sub 4} and HNO{sub 3} Redox Pair

The novelty addressed here is commenced with a view to use our formerly prepared starch nanoparticles (SNPs) of size around 80–100 nm as a starting substrate for grafting meth acrylic acid (MAA) using KMnO{sub 4}, HClO{sub 4} in presence of HNO{sub 3} as innovative redox pair in aqueous medium. This was done to see the effect of SNPs with respect to well-dispersed nanosized particles, large surface areas, biodegradability and reactivity on the rate and extent of grafting. Besides; maximize the graft yield and graft reaction efficiency and reduce the homopolymer formation to lower extent. This could be accomplished via an in-depth assessment into the chief factors affecting the polymerization reaction such as initiator, monomer, SNPs and acid concentrations, time and temperature of polymerization, and liquor ratio. The results obtained indicate that the magnitude of the polymer yield including graft yield, graft reaction efficiency and homopolymer formation are determined by these factors. The structure of the resultant copolymers was confirmed instrumentally by Fourier transforms infrared spectroscopy; while both the surface morphology, crystalline structure and thermal properties were characterized by scanning electron microscopy, X-ray diffraction and thermal gravimetric analysis. Furthermore, the resultant copolymers were evaluated as environmental remediation materials via cadmium ions and cationic dyes removal from their solutions with different extent; in addition to higher swelling and chemical resistance in water as polar solvent and hydrochloric acid as acidic solution. The anticipated mechanisms involved in the synthesis are reported.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Polymer Based Palladium Nanocatalyst for the Degradation of Nitrate and Congo Red

In this study, the Pd catalyst based on chitosan-tannin (CT) framework as support was prepared and characterized. The CT support and Pd catalyst were characterized by attenuated total reflection (ATR) spectroscopy and Raman spectroscopy, Scanning electron microscopy-energy dispersive X-ray analyzer (SEM–EDX) and transmission electron microscopy (TEM) and X-ray diffractometry (XRD). Attenuated total reflection (ATR) spectra revealed the coordination of Pd via hydroxyl and amino functional groups. Raman spectral analysis was carried out to give information about the structural defect of the catalyst compared to CT support. The SEM–EDX results revealed regular surface morphology and presence of Pd in the catalyst as compared to CT support. TEM analysis revealed that the deposition of Pd on organic support with a spherical shape possessing size in the range of 6.01 nm–20.7 nm (average particle size = 12.65 ± 3.14 nm). The XRD results revealed the amorphous nature of the catalyst compared to CT support. TGA analysis revealed that the catalyst is highly thermally-stable compared to CT support. The catalytic activity of Pd catalyst was investigated for the reduction of nitrate and Congo red in the presence and absence of H{sub 2}. The catalytic activities exhibited 71.11% and 23% removal of nitrate and Congo red in 20 and 60 min, respectively. Thus, results suggested that Pd catalyst has a potential of catalytic activity toward reduction of nitrate and Congo red in presence H{sub 2}.

36 MATERIALS SCIENCE↗

High Removal Capacity of Arsenic from Drinking Water Using Modified Magnetic Polyurethane Foam Nanocomposites

In this study, a novel polyurethane foam (PU) nanocomposite adsorbent based on silane-modified magnetic iron-oxide nanoparticles (Fe{sub 3}O{sub 4}@APTES) is synthesized via a low cost and simple in situ polymerization method for the removal of arsenic ions from aqueous solutions. The chemical structure and surface morphology of the prepared nanoparticles and adsorbent were characterized using Fourier transform infrared spectroscopy, attenuated total reflection, scanning electron microscopy, transmission electron microscopy, and energy-dispersive X-ray spectroscopy. Inductively coupled plasma mass spectrometry was used to measure the arsenic concentration of the treated solutions. Sorption isotherms models were applied to determine the adsorption mechanism and modeling parameters. The removal capacity of the modified PU foam was at its highest during a contact time of four hours which resulted in a removal capacity of 95%. Kinetic studies were conducted to determine the adsorption capacity and the uptake rate of arsenic. A Pseudo-order model was found to be the best fit model for adsorption. The prepared adsorbent can be separated from the solution by using an external magnet field.

36 MATERIALS SCIENCE↗

Disintegration and Biodegradation in Soil of PBAT Mulch Films: Influence of the Stabilization Systems Based on Carbon Black/Hindered Amine Light Stabilizer and Carbon Black/Vitamin E

This work characterized the disintegration and biodegradation of aged samples of PBAT films with and without photostabilization additives. The objective is to correlate these processes with properties affected after aging, i.e. molecular weight and gel content. Three different formulations were studied: pure polymer; PBAT with carbon black and hindered amine light stabilizer (HALS) and PBAT with carbon black and phenolic stabilizer vitamin E. The samples were monitored for 12 months. As expected, the lower level of photostabilization lead to the higher disintegration and biodegradation rates. Nevertheless, mineralization test showed that during time the differences among biodegradation rates become subtler. The crystallinity degree presented changes only at an advanced stage of degradation process, showing a reduction. The evaluation of the carbonyl index, molecular weight, surface morphology and visual analysis allowed to observe that the aged samples with lower gel content and lower molecular weight showed a faster degradation rate. The changes in material structure due to the increase of aromatic units concentration is the main hypothesis to explain the material behavior during degradation in soil.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhancing the Anti-biofouling Properties of Polyethersulfone Membrane Using Chitosan-Powder Activated Carbon Composite

Biofouling is one of the major challenges of membrane technology in water and wastewater treatments. In this work, we investigated the potential of chitosan/chitosan powder activated carbon (PAC) composite to reduce biofouling of membrane. Polyethersulfone (PES) membrane was modified with chitosan/chitosan-PAC composite and the performance of the modified membrane in river water treatment was evaluated. The effect of different concentration of polymer [(chitosan: 2.0% (w/v), 1.0% (w/v), 0.5% (w/v), 0.1% (w/v), and chitosan-PAC composite: 1.5% (w/v) − 1.0 (w/v), 0.5% (w/v) − 0.2% (w/v)] on the membrane performance was examined. The properties of the modified membrane such as roughness, morphology, surface functional groups wettability, swelling ration and contact angle were analyzed. The membrane water flux increased with increasing chitosan concentration from 0.1% (w/v) (7.36 mL/cm{sup 2} m) to 1.0% (w/v) (9.46 mL/cm{sup 2} m), but decreased at (2.0 w/v) (5.30 mL/cm{sup 2} m). However, the water flux for chitosan-PAC-modified membrane was about 6.86 mL/cm{sup 2} m, which was slightly lower than unmodified membrane (7.36 mL/cm{sup 2} m). The chitosan-modified membrane resulted in 28% reduction in total coliform bacteria while the chitosan-PAC-modified membrane reduced 45% of the total coliform bacteria. These results indicated that chitosan and chitosan-PAC composite could enhance the anti-microbial properties of PES membrane, which would prevent biofilm formation during water treatment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural and Magnetic Properties of Mn{sub 1−x}Zn{sub x}Fe{sub 2}O{sub 4} Ferrite Nanoparticles

In this work, solid solutions of Mn{sub 1−x}Zn{sub x}Fe{sub 2}O{sub 4} (where x = 0.0, 0.2, 0.4, 0.6, 0.8, and 1.0) ferrite nanoparticles were synthesized using the novel combustion method. A powder X-ray diffraction study confirms the formation of spinel-structured Mn{sub 1−x}Zn{sub x}Fe{sub 2}O{sub 4}. Unusual increases in the lattice constant were observed from 8.358 to 8.435 Å for Zn substitution. Raman spectra show the change in local environment of tetrahedral and octahedral symmetry. Field emission scanning electron microscopy images show that the prepared samples are nanosized and there is not much difference observed in surface morphology. A magnetic study reveals that the prepared samples exhibit superparamagnetic properties with negligible coercivity and the saturation magnetizations initially increase from 31.12 emu g{sup −1} (x = 0) to 35.48 emu g{sup −1} (x = 0.2) and then decrease for further Zn substitution at 300 K. The zero-field-cooled and field-cooled magnetization studies confirm the superparamagnetic nature of prepared samples, and the observed blocking temperature decreases from 146.05 to 32.3 K. At 20 K, the measured hysteresis loop shows the coercivity and it gradually decreases from 810 to 152 Oe. The obtained results suggest that the prepared superparamagnetic Mn{sub 1−x}Zn{sub x}Fe{sub 2}O{sub 4} ferrite nanoparticles are a promising candidate material for biomedical applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and Dielectric Properties of Rare Earth Doped Lithium Nanoferrites for Sensing Applications

Nowadays it is the hot topic to analyze the behavior of different materials towards gasses so that they can be used for sensing purpose. Ferrites specifically lithium ferrites show very good response to gasses present in the environment. Lithium ferrite doped with Gd (Li{sub 0.5}Fe{sub 2.475}Gd{sub 0.025}O{sub 4}) was selected for this purpose. Sample was synthesized by simplified sol-gel technique. After that, pellets were formed and sintered at different temperatures. Spinel cubic phase was observed in x-ray diffraction (XRD). It is noted that by increasing sintering temperature, results slightly decrease in lattice constant. Scanning electron microscopy (SEM) was used to study the surface morphology of the samples. It was observed that particles were spherical in shape. AC electrical properties were studied at room temperature in the frequency range of 20 Hz to 3 MHz. AC electrical conductivity and dielectric constant decreased with the increase in sintering temperature. The maximum conductivity was observed in the sample that was sintered at temperature of 700 {sup ∘}C. Significant variation in electrical response with frequency made these samples suitable for sensing applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optimization of BaHfO{sub 3} Doping Concentration as Secondary Phase in Y{sub 0.5}Gd{sub 0.5}Ba{sub 2}Cu{sub 3}O{sub 7−x} Thin Film Prepared by Pulsed Laser Deposition

BaHfO{sub 3} (BHO)-doped Y{sub 0.5}Gd{sub 0.5}Ba{sub 2}Cu{sub 3}O{sub 7−x} (YGBCO) films with a series of doping concentrations (1, 3, 5, and 10 mol%) were fabricated on CeO{sub 2} buffer layers by pulsed laser deposition (PLD) technique, and a pristine YGBCO film was also deposited at the same conditions for comparison. X-ray diffraction (XRD) results showed that the undoped and doped YGBCO films had a pure c-axis orientation. While the surface morphology and crystal quality of the BHO-doped YGBCO films deteriorated as the BHO content increased, and the critical current density (J{sub c}) at 77 K and self-field (J{sub c}{sup 77,0}) and critical transition temperature (T{sub c}) of the BHO-doped YGBCO films exhibited varying degrees of decline in comparison with the pristine YGBCO film. However, the 5 mol% BHO-doped YGBCO film exhibited greatly enhanced the J{sub c} and the highest pinning force densities (F{sub p}) at both 4.2 and 65 K, which showed the maximum value of 5776 GN/m{sup 3} (4.2 K, H//c) and 117 GN/m{sup 3} (65 K, H//c), about 1.5 times that of the undoped YGBCO film. Based on the results, the 5 mol% BHO-doped YGBCO film had the most effective flux pinning centers, which are responsible for strongly improved critical current densities in magnetic fields.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of Mo Doping at the B Site on Structural and Electrical Properties of Multiferroic BiFeO{sub 3}

The Mo-doped BiFe{sub 1−x}Mo{sub x}O{sub 3}, where x = 0 and 0.6, samples were synthesised by the solid-state reaction method. Admirable ferroelectric and piezoelectric properties are expected on substituting solid solutions of bulk BFO with other oxide perovskite compounds. It offers an alternative and is an environment-friendly candidate for lead-free ferroelectric and piezoelectric devices. The prepared samples were investigated by XRD, Fourier transform infrared spectroscopy (FTIR), current density (JE) measurement, PE loop tracer and field emission scanning electron microscopy to examine their crystal structure, bonding nature, current density, ferroelectric hysteresis loop and surface morphology. The Mo-doped BFO shows a change in structure, increased grain size, reduction in current density and enhancement in the PE loop on doping Mo at the Fe site.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural, Microstructural, Magnetic, and Ferroelectric Properties of Ba{sup 2+}-Doped BiFeO{sub 3} Nanocrystalline Multifferroic Material

Multiferroic barium-substituted nanocrystalline samples having the general formula Bi{sub 1−x}Ba{sub x}FeO{sub 3} (where x = 0.00, 0.05, 0.10, 0.15, 0.20, 0.25) were prepared by cost-effective sol–gel method using metal nitrates as oxidants. The prepared samples were annealed at 650 {sup ∘}C for 4 h using a muffle furnace. The influence of Ba{sup 2+} doping on the structural, microstructural, magnetic, and ferroelectric properties of bismuth ferrite (BFO) was studied systematically by standard techniques. All the samples were characterized by X-ray diffraction (XRD) technique, and the average crystallite size was calculated using Scherrer’s formula. The surface morphology of the prepared nanocrystalline samples was studied using field emission scanning electron microscopy (FE-SEM) technique. FTIR spectra were obtained to confirm the formation of the perovskite structures. The elemental compositional details obtained were confirmed by energy dispersive spectrum (EDS) analysis. Room temperature magnetic measurements were carried out up to a field of 15 kOe, and the parent sample (BFO) shows weak ferromagnetism. Further on, Ba{sup 2+} substitution in BFO shows an increase in magnetization. P–E loops were obtained to study the ferroelectric properties of all the samples. Obtained enhancement in magnetic and ferroelectric properties at room temperature is of great interest within the research community due to its wide range of applications in memory storage, spintronics, sensors, and multi-functional devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Orientation Behavior and Mechanism of Ag-doped GdBa2Cu3O7-δ Superconducting thin Films Derived by Metal Organic Deposition

Ag-doped GdBa{sub 2}Cu{sub 3}O{sub 7−δ} (GdBCO)-coated conductors are fabricated via a metal-organic process. The X-ray diffraction and scanning electron microscopy results show that the growth conditions of the GdBa{sub 2}Cu{sub 3}O{sub 7−δ} matrix are modified, resulting in less a-axis growth and much smoother surface morphology and finally giving rise to much improvement of superconducting performance in a wide range of processing parameters. The orientation behavior and mechanism of Ag-doped GdBCO films are investigated. To reasonably explain the orientation behavior of Ag-doped GdBCO films, a simple nucleation model for Ag-doped GdBCO is established, suggesting quasi-liquid phases are perfected by Ag. As a consequence, a-axis nucleation is suppressed and strong c-axis nucleation is achieved in a wider processing window.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of Thickness on the Structural, Optical and Magnetic Properties of Bismuth Ferrite Thin Films

In this paper, the effect of thickness on the structural, optical, and magnetic properties of the BiFeO{sub 3} (BFO) thin films formed on a glass substrate by the chemical solution deposition has been studied. The sol-gel method combined by the spin-coating technique is used to fabricate BFO thin films. The XRD analysis indicated that BFO thin films had a rhombohedral perovskite structure. Polycrystallinity, smooth and compact surface morphology, and uniform size distribution, as well as average thickness of layers, were observed in FESEM images. UV-vis spectra showed that the absorption coefficient and energy bandgap increased by increasing the thickness of films. VSM measurements indicated that the thin films showed a behavior between weak ferromagnetic and anti-ferromagnetism for all samples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhanced Magneto-optical and Antibacterial Studies of Bi{sub 1−x}Mg{sub x}FeO{sub 3} (0.0 ≤ x ≤ 0.15)) Nanoparticles

Mg-doped BiFeO{sub 3} (Bi{sub 1−x}Mg{sub x}FeO{sub 3} (0.00 ≤ x ≤ 0.15)) nanoparticles (NPs) have been successfully prepared by simple solution combustion method using urea as fuel. The obtained product was sintered at 550 °C for 2 h to get pure-phase formation. The as-prepared samples were characterized by powder X-ray diffraction (XRD), Fourier transform infrared (FT-IR), field emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscope (TEM), ultraviolet–visible (UV-Vis) absorption, photoluminescence (PL) spectra, and vibrating sample magnetometer (VSM) analysis. Powder XRD study revealed that all products exhibit rhombohedral structure with pure-phase formation. The average crystallite size of the samples decreased from 56.25 to 46.15 nm with increasing the concentration of Mg (x = 0.00, 0.05, 0.10, and 0.15). Surface morphology of the samples were analyzed by FE-SEM and TEM micrograph techniques, and the grain distribution was not quite homogeneous and observed agglomeration of the particles, which is mainly due to the magnetic interaction among them. EDX analysis confirmed the presence of Bi, Fe, O, and Mg elements without any form of impurity peak in all products. PL spectra shows a high intense peak at 464 nm, which is attributed to blue emission. The saturation magnetization is enhanced with increasing Mg doping level at RT. Antibacterial activity of Bi{sub 1−x}Mg{sub x}FeO{sub 3} NPs was found to be enhanced with increase in Mg doping concentration as it causes a reduction in the grain size of the samples.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

High-Temperature Firing Effect on the Structure and Dielectric Properties of (0.5) La{sub 0.8}Sr{sub 0.2}MnO{sub 3} (LSMO) + (0.5) Ba{sub 0.5}K{sub 0.5}TiO{sub 3} (BKT) Composite

A composite of two perovskite materials namely Ba{sub 0.5}K{sub 0.5}TiO{sub 3}[BKT] and La{sub 0.8}Sr{sub 0.2}MnO{sub 3} [LSMO] was prepared via solid state reaction route. Analysis of the XRD data confirmed the single-phased crystalline cubic structure with assigned space group Pm-3m though parent compounds, i.e., BKT and LSMO, were cubic and rhombohedral structured, respectively, having space groups Pm-3m and R3c. The single phase of the composite is found to occur due to higher heat treatment. Retvield refinement of the XRD data confirmed the structure and other essential parameters regarding cubic structure. The Raman studies displayed active modes corresponding to the BKT (Pm-3m) phase. The surface morphology studies confirmed an increase in average particle size, and the energy dispersive analysis of X-ray (EDAX) technique revealed the presence of all the constituents of the material under investigation. The dielectric studies were carried out, and the sample was found to exhibit appreciable dielectric behaviour with a lower loss value. Impedance analysis revealed the non-Debye behaviour of the resultant composite and distribution of relaxation throughout the material. Resistivity measurement conveyed that incorporation of the BKT phase in the metallic phase of LSMO leads the composite to exhibit an insulating nature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Evidence of Room Temperature Ferromagnetism in Zn{sub 1−x}Sn{sub x}S Thin Films

Tin (Sn)-doped zinc sulfide (Zn{sub 1−x}Sn{sub x}S) thin films at different tin (Sn) concentrations (= 0.00, 0.02, 0.05, and 0.08) were coated onto Corning 7059 glass substrates using the electron beam evaporation technique. The films were subjected to different characterization techniques to study the physical properties of the thin films. The structural properties of the films were studied using a powder X-ray diffractometer (XRD), and it was found that the films were cubic in structure without any impurity phases. The crystallite size increased with an increase of Sn concentration, and the mean crystallite size was 21 nm. The chemical composition and surface morphology of the films were studied using scanning electron microscopy (FE-SEM) with energy-dispersive analysis of X-rays (EDAX). Optical properties such as transmittance and absorbance were recorded using a diffuse reflectance spectroscope (UV–vis–NIR). All the films exhibited high optical transmittance of 85% in the visible region of the solar spectrum. The band gap of the films was calculated using Tauc’s relation, and it was found that it increased from 3.53 to 3.57 eV with an increase in the Sn doping concentration from x = 0.02 to x = 0.08. The room temperature photoluminescence studies of the films were recorded using a fluorescence spectrophotometer, and it was found that the films exhibited a prominent emission peak at 420 nm. The magnetic properties of the films and glass substrates at room temperature were studied using a vibrating sample magnetometer. From this, it was found that the films were weakly ferromagnetic at room temperature and the strength of magnetization increased with an increase of doping concentration from x = 0.02 to x = 0.05 and decreased at higher doping concentrations (x = 0.08). The films showed high magnetization at x = 0.05. The films at x = 0.05 exhibited the magnetization (M{sub s}), retentivity (M{sub r}), and coercive fields (H{sub c}) 18 × 10{sup − 6} emu/cm{sup 3}, 1.6 × 10{sup − 6} emu/cm{sup 3}, and 91.80 Oe, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modified Magnetic and Electrical Properties of Perovskite-Spinel Multiferroic Composites

Multiferroic composite samples (1 − x) Bi{sub 0.9}Pr{sub 0.1}FeO{sub 3}–xNi{sub 0.5}Co{sub 0.5}Fe{sub 2}O{sub 4} for x = 0, 0.1, 0.2, 0.3, and 1.0 were synthesized by sol-gel auto-combustion method. Detailed investigations were made on the structural, magnetic, and electrical properties of these composites. The X-ray diffraction (XRD) patterns confirm the co-existence of perovskite BPFO and spinel ferrite NCFO without any impurity phase. The average particle size of BPFO and NCFO nanoparticles is nearly equal to 110 nm and 35 nm respectively which are confirmed by XRD and transmission electron microscopy (TEM) analysis. Structural and surface morphology are studied by scanning electron microscopy (SEM). The dielectric properties of the composites are also studied at room temperature. The saturation and remnant magnetization are found to increase with increase in NCFO weight percentage in the composites. The saturation magnetization (Ms) values are 3.38 emu/g, 8.65 emu/g, and 13.87 emu/g and coercivity (Hc) values are 936.52 Oe, 1058.12 Oe, and 1046.77 Oe for BPFO-NCFO 1, 2, and 3 composite samples respectively. The incorporation of BPFO and NCFO enhances the multiferroic properties in the present composite materials which are quite promising for applications point of view.

36 MATERIALS SCIENCE↗

Martensitic Transformation and Magnetocaloric Effect in High-Pressure Synthesized Ni{sub 53}Mn{sub 23.5}Ga{sub 23.5} Alloys

The polycrystalline Ni{sub 53}Mn{sub 23.5}Ga{sub 23.5} ferromagnetic alloy was synthesized by high-pressure method. The Ni{sub 53}Mn{sub 23.5}Ga{sub 23.5} ribbons were prepared by melt-spinning; then, the ribbons were pressed to the bulk samples under the 6-GPa high-pressure and heated to 1173 K for 30 min. The surface morphology, phase transition, and magnetocaloric effect (MCE) were investigated in the Ni{sub 53}Mn{sub 23.5}Ga{sub 23.5} bulk sample. Structural analysis and magnetic measurements studies of the bulk samples revealed the martensitic transformation at room temperature with a low thermal hysteresis of magnetization, and the nanocrystalline was observed by atomic force microscope measurements. The Ni{sub 53}Mn{sub 23.5}Ga{sub 23.5} bulk sample exhibits the directionality, and the magnetic properties have the large magnetization and low coercivity when the sample direction of the applied pressure was perpendicular to the direction of the applied magnetic field. The maximum entropy changes (∆S{sub M}) of − 4.8 J/kg K have been obtained at 330 K under the field of 30 kOe in the Ni{sub 53}Mn{sub 23.5}Ga{sub 23.5} bulk sample.

36 MATERIALS SCIENCE↗

Magnetic and Magnetotransport Characteristics of Cr-Substituted Ni{sub 55}Mn{sub 34}Sn{sub 11} Thin Films Grown by Magnetron Sputtering

Highly oriented Cr-substituted Ni{sub 55}Mn{sub 34}Sn{sub 11} Heusler thin films having thickness ~ 400 nm were deposited by Ultrahigh vacuum dc magnetron sputtering on MgO (100) substrates. At room temperature, the films exhibit a mixture of dominant L2{sub 1} cubic austenite phase, as revealed by the intense (002) and (004) peaks, along with small fraction of the orthorhombic–martensitic phase. Surface morphology of the thin films showed distribution of Cr-rich and Cr-deficit regions together with patterned and aligned magnetic domains, thus bringing out the inherent room temperature ferromagnetism of the film. At temperatures above the Curie temperature, T{sub C} ~ 321 K, the magnetic behaviour of the films is seen to follow the Curie law rather than the Curie–Weiss law. Ferromagnetic to antiferromagnetic transition appears at T{sub N} ~ 247 K, which gives rise to exchange bias at low temperatures due to the coexistence of the two magnetic orders. This phase coexistence also leads to the formation of a spin glass state deep into the martensitic region. The film exhibits metal-like nature at high temperature and semiconductor-like behaviour with the lowering of temperature. A reentrant metallic state is observed at T ≤ 38 K during cooling that persists up to ≤ 62 K in warming cycle. The hysteresis in the ρ–T curve spread over a very wide temperature range confirms the magnetic phase coexistence in the martensitic state in the present thin films. The magnetoresistance (MR) first increases (2.4% at 300 K and H = 50 kOe) with temperature and maximizes to around ~ 3.25% at T = 150 K and then starts decreasing. Its value in the glassy state is very small. This shows that a magnetic liquid like state is more conducive to larger MR.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗