Search NASA⌕ Search

SEARCH · Search NASA

Results for “system specification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

Design package for solar domestic hot water system

The initial design of a solar domestic hot water system is considered. The system performance specification and detailed design drawings are included. The hot water systems consist of the following subsystems: collector, storage, control, transport, auxiliary energy, and government-furnished site data acquisition. The two systems are installed at Tempe, Arizona, and San Diego, California.

Source record↗

Design of catalytic monoliths for closed-cycle carbon dioxide lasers

Pulsed carbon dioxide (CO2) lasers have many applications in aeronautics, space research, weather monitoring and other areas. Full exploitation of the potential of these lasers in hampered by the dissociation of CO2 that occurs during laser operation. The development of closed-cycle CO2 lasers requires active CO-O2 recombination (CO oxidation) catalyst and design methods for implementation of catalysts in CO2 laser systems. A monolith catalyst section model and associated design computer program, LASCAT, are presented to assist in the design of a monolith catalyst section of a closed cycle CO2 laser system. Using LASCAT,the designer is able to specify a number of system parameters and determine the monolith section performance. Trade-offs between the catalyst activity, catalyst dimensions, monolith dimensions, pressure drop, O2 conversion, and other variables can be explored and adjusted to meet system design specifications. An introduction describes a typical closed-cycle CO2 system, and indicates some advantages of a closed cycle laser system over an open cycle system and some advantages of monolith support over other types of supports. The development and use of a monolith catalyst model is presented. The results of a design study and a discussion of general design rules are given.

Herz, R. K.↗

Oxygen Systems Cleaners for Aerospace Applications

New environmental regulations have forced extensive evaluations of many different cleaning agents for use in oxygen systems. This is no simple process because pure oxygen is a very strong oxidizer, and when placed in contact with a foreign substance, the combination may be explosive. This foreign substance can easily be a cleaning agent residue left over in the oxygen system after cleaning. This paper focuses on the factors that must be considered when selecting a cleaning agent for oxygen systems, as well as the approval processes which are currently being utilized by NASA for oxygen compatibility of materials. This paper will provide a working description of how to begin selecting a cleaning agent for oxygen systems. The paper will present the following: Background information on the necessity of a stringent selection process for oxygen system cleaners; Specifications and regulations concerning cleaning for oxygen service; Changing oxygen cleaning specifications given current environmental concerns; Testing for cleanliness in oxygen systems, Cleaning agents that have been tested for oxygen systems, including an extensive list of some of the newer 'environmentally friendly' cleaning agents; and Test results and conclusions from the testing. The paper will also provide instructions on the proper procedures for obtaining NASA approval on a candidate oxygen systems cleaning agent.

Davis, Samuel E.↗

Overview of SBMD, NMSD and AMSD

For the past several years, NASA has conducted a coordinated mirror technology development program via SBIR's and contracts. This presentation provides a programmatic overview of three specific projects: SBMD (Subscale Beryllium Mirror Demonstrator), NMSD (NGST Mirror System Demonstrator) and AMSD (Advanced Mirror System Demonstrator). Specific emphasis will be given to technical constraints and objectives.

Stahl, H. Philip↗

CRYOGENIC UPPER STAGE SYSTEM SAFETY

NASA s Exploration Initiative will require development of many new systems or systems of systems. One specific example is that safe, affordable, and reliable upper stage systems to place cargo and crew in stable low earth orbit are urgently required. In this paper, we examine the failure history of previous upper stages with liquid oxygen (LOX)/liquid hydrogen (LH2) propulsion systems. Launch data from 1964 until midyear 2005 are analyzed and presented. This data analysis covers upper stage systems from the Ariane, Centaur, H-IIA, Saturn, and Atlas in addition to other vehicles. Upper stage propulsion system elements have the highest impact on reliability. This paper discusses failure occurrence in all aspects of the operational phases (Le., initial burn, coast, restarts, and trends in failure rates over time). In an effort to understand the likelihood of future failures in flight, we present timelines of engine system failures relevant to initial flight histories. Some evidence suggests that propulsion system failures as a result of design problems occur shortly after initial development of the propulsion system; whereas failures because of manufacturing or assembly processing errors may occur during any phase of the system builds process, This paper also explores the detectability of historical failures. Observations from this review are used to ascertain the potential for increased upper stage reliability given investments in integrated system health management. Based on a clear understanding of the failure and success history of previous efforts by multiple space hardware development groups, the paper will investigate potential improvements that can be realized through application of system safety principles.

Smith, R. Kenneth↗

Model-Based Verification and Validation of the SMAP Uplink Processes

This case study stands as an example of how a project can validate a system-level design earlier in the project life cycle than traditional V&V processes by using simulation on a system model. Specifically, this paper describes how simulation was added to a system model of the Soil Moisture Active-Passive (SMAP) mission's uplink process.Also discussed are the advantages and disadvantages of the methods employed and the lessons learned; which are intended to benefit future model-based and simulation-based V&V development efforts.

verification and validation (V&V)↗

Applied Operations Research: Augmented Reality in an Industrial Environment

Augmented reality is the application of computer generated data or graphics onto a real world view. Its use provides the operator additional information or a heightened situational awareness. While advancements have been made in automation and diagnostics of high value critical equipment to improve readiness, reliability and maintenance, the need for assisting and support to Operations and Maintenance staff persists. AR can improve the human machine interface where computer capabilities maximize the human experience and analysis capabilities. NASA operates multiple facilities with complex ground based HVCE in support of national aerodynamics and space exploration, and the need exists to improve operational support and close a gap related to capability sustainment where key and experienced staff consistently rotate work assignments and reach their expiration of term of service. The initiation of an AR capability to augment and improve human abilities and training experience in the industrial environment requires planning and establishment of a goal and objectives for the systems and specific applications. This paper explored use of AR in support of Operation staff in real time operation of HVCE and its maintenance. The results identified include identification of specific goal and objectives, challenges related to availability and computer system infrastructure.

Cole, Stuart K.↗

Identifying and bounding uncertainties in nuclear reactor thermal power calculations

Determination of the thermal power generated in the reactor core of a nuclear power plant is a critical element in the safe and economic operation of the plant. Direct measurement of the reactor core thermal power is made using neutron flux instrumentation; however, this instrumentation requires frequent calibration due to changes in the measured flux caused by fuel burn-up, flux pattern changes, and instrumentation drift. To calibrate the nuclear instruments, steam plant calorimetry, a process of performing a heat balance around the nuclear steam supply system, is used. There are four basic elements involved in the calculation of thermal power based on steam plant calorimetry: The mass flow of the feedwater from the power conversion system, the specific enthalpy of that feedwater, the specific enthalpy of the steam delivered to the power conversion system, and other cycle gains and losses. Of these elements, the accuracy of the feedwater mass flow and the feedwater enthalpy, as determined from its temperature and pressure, are typically the largest contributors to the calorimetric calculation uncertainty. Historically, plants have been required to include a margin of 2% in the calculation of the reactor thermal power for the licensed maximum plant output to account for instrumentation uncertainty. The margin is intended to ensure a cushion between operating power and the power for which safety analyses are performed. Use of approved chordal ultrasonic transit-time technology to make the feedwater flow and temperature measurements (in place of traditional differential-pressure- based instruments and resistance temperature detectors [RTDs]) allows for nuclear plant thermal power calculations accurate to 0.3%-0.4% of plant rated power. This improvement in measurement accuracy has allowed many plant operators in the U.S. and around the world to increase plant power output through Measurement Uncertainty Recapture (MUR) up-rates of up to 1.7% of rated power, while also decreasing the probability of significant over-power events. This paper will examine the basic elements involved in calculation of thermal power using ultrasonic transit-time technology and will discuss the criteria for bounding uncertainties associated with each element in order to achieve reactor thermal power calculations to within 0.3% to 0.4%. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Rationale for the Performance Specification for Standardized Transportation, Aging, and Disposal Canister Systems (Rev.1)

This document provides the rationale for the specifications for the standardized transportation, aging, and disposal (STAD) canister systems provided in Performance Specification for Standardized Transportation, Aging, and Disposal Canister Systems, FCRD-NFST-2014-000579, Rev. 2, referred to as STAD Spec herein. The STAD Spec was developed to support STAD canister system studies and potential research, development, and demonstration activities. Requirements in the specification may evolve with time based on results from analyses, experiments, design studies, system evaluations and demonstrations, as well as other factors. The STAD canister system consists of a canister, together with a storage or aging overpack/module/vault, a shielded transfer cask (STC), a site transporter, a transportation overpack, and a transportation skid. Three sizes of circular cross section STAD canister variants are specified. The small STAD canister capacity is four pressurized water reactor (PWR) or nine boiling water reactor (BWR) spent nuclear fuel (SNF) assemblies. The medium STAD canister capacity is 12 PWR or 32 BWR SNF assemblies. The large STAD canister capacity is 21 PWR or 44 BWR SNF assemblies. There are 60 specifications in the STAD Spec that cover the STAD canister general design attributes, canister safety functional requirements, operational considerations, materials, storage and aging system requirements, and transportation system requirements. The 60 specifications are derived from regulatory requirements, regulatory guidance, STAD canister disposability considerations, and interim storage facility (ISF) and geologic repository handling facility considerations.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Control of nonlinear time-varying systems

Necessary and sufficient conditions are given for a time-varying nonlinear system of specific form to be transformed into a time-invariant controllable linear system. Since the present work will be in a neighborhood of the origin, it is unnecessary to name specific sets and it is assumed that all assumptions, conditions and results hold in an open set in the appropriate Euclidean space that contains the origin. This theory can be combined with the global inverse function theorems to produce global results.

Hunt, L. R.↗

Applications of Nuclear Thermal Propulsion Systems for Deep Space Science Missions

Nuclear thermal propulsion (NTP) systems occupy a unique area in the space propulsion technology landscape, due to their ability to combine moderate-to-high thrust systems normally seen in chemical propulsion systems with specific impulses that are higher than those of more traditional chemical propulsion systems. Thus, NTP systems have the potential to greatly expand our access to deep space and can enable or enhance capabilities for a variety of missions that achieve science goals as outlined in NASA’s decadal surveys. This paper leverages previous work performed on applying NTP systems for multiple science missions. It also expands the mission portfolio to additional NTP-powered science mission profiles, evaluating the system performance benefits delivered by this propulsion option. This paper will also outline efforts to improve the fidelity of the existing NTP design concepts and vehicles that are utilized, leveraging previous work on nuclear propulsion systems for human-Mars missions to enhance the fidelity of results obtained from previous science mission concept studies – specifically Triton lander, solar polar orbiter, and the interstellar medium probe missions. The work outlined in this paper will also examine additional missions that have been highlighted in the recent decadal surveys, which may include robotic missions to the ice giant Uranus, robotic missions to Venus, and missions to various Kuiper belt objects (KBOs).

K A Polzin↗

Detection of small molecules with a flow immunosensor

We describe the development of an easy-to-use sensor with widespread applications for detecting small molecules. The flow immunosensor can analyze discrete samples in under one minute or continuously monitor a flowing stream for the presence of specific analytes. This detection system is extremely specific, and achieves a level of sensitivity which meets or exceeds the detection limits reported for rival assays. Because the system is also compact, transportable, and automated, it has the potential to impact diverse areas. For example, the flow immunosensor has successfully detected drugs of abuse and explosives, and may well address many of the needs of the environmental community with respect to continuous monitoring for pollutants. Efforts are underway to engineer a portable device in the field.

Kusterbeck, Anne W.↗

Function, Structure, and Regulation of Nitrogen Fixation-like Metalloproteins for Nitrogen, Energy, Carbon, and Sulfur Metabolism

Nitrogenases (N 2 ases) and nitrogen fixation-like (NFL) systems play distinct roles in nitrogen, carbon, sulfur, and energy metabolism based on their fundamental differences in structure and metallocofactor identity. As new NFL systems have recently been identified and characterized, striking parallels and differences compared to N 2 ase structure, catalysis, and regulation have emerged. NFL systems use metallocofactors that span from simple [4Fe-4S] clusters to complex clusters akin to FeMo-co, previously only thought to occur in N 2 ase. This review describes the present state of knowledge on the function, structure, catalytic mechanisms, and regulation of NFL systems that perform distinct biological roles across all three domains of life. Recent advancements in N 2 ase spectroscopic techniques for probing metallocofactor structure and electronic states guide current and future work on how each NFL system catalyzes its specific biological reaction(s). Key knowledge gaps and needed areas of research for uncovering the specific metallocofactors and structural motifs that are at the heart of NFL system reaction specificity, along with how these systems are regulated, are discussed.

Bacteria↗

V&V Within Reuse-Based Software Engineering

Verification and Validation (V&V) is used to increase the level of assurance of critical software, particularly that of safety-critical and mission-critical software. V&V is a systems engineering discipline that evaluates the software in a systems context, and is currently applied during the development of a specific application system. In order to bring the effectiveness of V&V to bear within reuse-based software engineering, V&V must be incorporated within the domain engineering process.

Addy, Edward A.↗

Code for Analyzing and Designing Spacecraft Power System Radiators

GPHRAD is a computer code for analysis and design of disk or circular-sector heat-rejecting radiators for spacecraft power systems. A specific application is for Stirling-cycle/linear-alternator electric-power systems coupled to radioisotope general-purpose heat sources. GPHRAD affords capabilities and options to account for thermophysical properties (thermal conductivity, density) of either metal-alloy or composite radiator materials.

Juhasz, Albert↗