Search NASA⌕ Search

SEARCH · Search NASA

Results for “Additive decomposition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Optimizing the TiO{sub 2} Content to Obtain the Highest Corrosion Resistance in Ir-Ru-Ta-Based Mixed Metal Oxide Coating in Oxygen Evolution Reaction Application

In this article, the role of TiO{sub 2} on deactivation and corrosion mechanism of a MMO coating was assessed in 1 M Na{sub 2}SO{sub 4} solution. The Ti/40IrO{sub 2} + 30RuO{sub 2} + (30 − x)Ta{sub 2}O{sub 5} + (x)TiO{sub 2} anodes were prepared by thermal decomposition method. Surface morphology and microstructure of the coatings were characterized by scanning electron microscopy, energy-dispersive spectroscopy and grazing incidence x-ray diffraction analysis. The electrochemical properties and corrosion behavior of these coatings were performed by accelerated lifetime test, investigation of active surface area (q*) and electrochemical impedance spectroscopy. The results showed that the uniform dissolution of the active surface layers was the main reason behind the anode deactivation. Furthermore, addition of titanium oxide up to 15% to the above-mentioned composition improved the performance of the anode and increased its working life up to 200 h.

36 MATERIALS SCIENCE↗

Experimental and modeling study of water time histories during H 2 S-N 2 O combustion in a shock tube

Here, with the interest in directly burning sour gas in gas turbines, and the fact that even small amounts of H 2 S or its combustion products can alter combustion characteristics, many research studies have been performed to better understand the combustion chemistry of H 2 S. In the present study, the water formation was followed by laser absorption with N 2 O as an oxidant, instead of O 2 . Nitrous Oxide being essentially consumed via N 2 O (+M) ⇌ N 2 + O (+M), the water formation via the H 2 S + O route can then be probed to further validate the models. Three H 2 S/N 2 O mixtures diluted in 98% Ar were studied to cover the following range of equivalence ratios: 0.5, 1.0, and 2.0, over a wide range of temperatures (1580–1940 K) around atmospheric pressure. A chemical kinetic model was then developed first by validating the base N 2 O kinetics mechanism, then by investigating the experimental results presented herein. The N 2 O kinetics mechanism was updated with recent work on the low- and high-pressure limits for N 2 O decomposition (N 2 O (+M) ⇌ N 2 + O (+M)) as well as a review of rate coefficients for N 2 O + H ⇌ N 2 + OH from the literature. Good agreement is shown for H 2 /N 2 O mixtures. Updates were then made to the H 2 S kinetics mechanism, specifically, an update from the literature on SO 2 + H (+M) ⇌ SO + OH (+M) and an adjustment to SO + SH ⇌ S 2 + OH. Additionally, reactions between SH and N 2 O were determined using W1BD data and transition state theory which required the addition of an NNS sub-mechanism. With these updates, the mechanism provides good agreement with the H 2 S/N 2 O experiments.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

La 2 Zr 2 O 7 Nanoparticle-Mediated Synthesis of Porous Al-Doped Li 7 La 3 Zr 2 O 12 Garnet

In this work, we modified the reaction pathway to quickly (minutes) incorporate lithium and stabilize the ionic conducting garnet phase by decoupling the formation of a La–Zr–O network from the addition of lithium. To do this, we synthesized La 2 Zr 2 O 7 (LZO) nanoparticles to which LiNO 3 was added. This method is a departure from typical solid-state synthesis methods that require high-energy milling to promote mixing and intimate particle–particle contact and from sol–gel syntheses as a unique porous microstructure is obtained. We show that the reaction time is limited by the rate of nitrate decomposition and that this method produces a porous high-Li-ion-conducting cubic phase, within an hour, that may be used as a starting structure for a composite electrolyte.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Glass shell manufacturing in space

Residual gases always found in glass shells are CO2, O2 and N2. In those cases where high water vapor pressure is maintained in the furnace, water is also found in the shells. Other evidence for the existence of water in shells is the presence of water-induced surface weathering of the interior shell surface. Water and CO2 are the predominant volatiles generated by the pyrolysis of both inorganic and hydrolyzed metal-organic gels. The pyrolysates of unhydrolyzed metal-organic gels also contain, in addition to water and CO2, significant levels of organic volatiles, such as ethanol and some hydrocarbons; on complete oxidation, these produce CO2 and water as well. Water is most likely the initial blowing agent, it is produced copiously during the initial stages of heating. In the later stages, CO2 becomes the dominant gas as H2O is lost at increasing rates. Water in the shell arises mainly from gel dehydration, CO2 by sodium bicarbonate/carbonate decomposition and carbon oxidation, and O2 and N2 by permeation of the ambient furnace air through the molten shell wall.

Nolen, R. J.↗

A Domain-Decomposed Multi-Level Method for Adaptively Refined Cartesian Grids with Embedded Boundaries

The work presents a new method for on-the-fly domain decomposition technique for mapping grids and solution algorithms to parallel machines, and is applicable to both shared-memory and message-passing architectures. It will be demonstrated on the Cray T3E, HP Exemplar, and SGI Origin 2000. Computing time has been secured on all these platforms. The decomposition technique is an outgrowth of techniques used in computational physics for simulations of N-body problems and the event horizons of black holes, and has not been previously used by the CFD community. Since the technique offers on-the-fly partitioning, it offers a substantial increase in flexibility for computing in heterogeneous environments, where the number of available processors may not be known at the time of job submission. In addition, since it is dynamic it permits the job to be repartitioned without global communication in cases where additional processors become available after the simulation has begun, or in cases where dynamic mesh adaptation changes the mesh size during the course of a simulation. The platform for this partitioning strategy is a completely new Cartesian Euler solver tarcreted at parallel machines which may be used in conjunction with Ames' "Cart3D" arbitrary geometry simulation package.

Aftosmis, M. J.↗

High Frequency Electromechanical Imaging of Ferroelectrics in a Liquid Environment

The coupling between electrical and mechanical phenomena is a ubiquitous feature of many information and energy storage materials and devices. In addition to involvement in performance and degradation mechanisms, electromechanical effects underpin a broad spectrum of nanoscale imaging and spectroscopies including piezoresponse force and electrochemical strain microscopies. Traditionally, these studies are conducted under ambient conditions. However, applications related to imaging energy storage and electrophysiological phenomena require operation in a liquid phase and therefore the development of electromechanical probing techniques suitable to liquid environments. Due to the relative high conductivity of most liquids and liquid decomposition at low voltages, the transfer of characterization techniques from ambient to liquid is not straightforward. Here we present a detailed study of ferroelectric domain imaging and manipulation in thin film BiFeO{sub 3} using piezoresponse force microscopy in liquid environments as model systems for electromechanical phenomena in general. We explore the use of contact resonance enhancement and the application of multifrequency excitation and detection principles to overcome the experimental problems introduced by a liquid environment. Understanding electromechanical sample characterization in liquid is a key aspect not only for ferroelectric oxides but also for biological and electrochemical sample systems.

25 ENERGY STORAGE↗

Decomposition of Rare Earth Loaded Resin Particles

The Fuel Cycle R and D (FCR and D) program within the Department of Energy Office of Nuclear Energy (DOE-NE) is evaluating nuclear fuel cycle options, including once-through, modified open, and fully closed cycles. Each of these scenarios may utilize quite different fuel management schemes and variation in fuel types may include high thermal conductivity UO{sub 2}, thoria-based, TRISO, metal, advanced ceramic (nitride, carbide, composite, etc.), and minor actinide (MA) bearing fuels and targets. Researchers from the US, Europe, and japan are investigating methods of fabricating high-specific activity spherical particles for fuel and target applications. The capital, operating, and maintenance costs of such a fuel fabrication facility can be significant, thus fuel synthesis and fabrication processes that minimize waste and process losses, and require less footprint are desired. Investigations have been performed at the Institute for Transuranium Elements (ITU) and the French Atomic Energy Commission (CEA) studying the impact of americium and curium on the fuel fabrication process. proof of concept was demonstrated for fabrication of MA-bearing spherical particles, however additional development will be needed for engineering scale-up. Researchers at the Paul Scherer Institute (PSI) and the Japan Atomic Energy Association (JAEA) have collaborated on research with ceramic-metallic (CERMET) fuels using spherical particles as the ceramic component dispersed in the metal matrix. Recent work at the CEA evaluates the burning of MA in the blanket region of sodium fast reactors. There is also interest in burning MA in Canada Deuterium Uranium (CANDU) reactors. The fabrication of uranium-MA oxide pellets for a fast reactor blanket or MA-bearing fuel for CANDU reactors may benefit from a low-loss dedicated footprint for producing MA-spherical particles. One method for producing MA-bearing spherical particles is loading the actinide metal on a cation exchange resin. The AG-50W resin is made of sulfonic acid functional groups attached to a styrene divinylbenzene copolymer lattice (long chained hydrocarbon). The metal cation binds to the sulfur group, then during thermal decomposition in air the hydrocarbons will form gaseous species leaving behind a spherical metal-oxide particle. Process development for resin applications with radioactive materials is typically performed using surrogates. For americium and curium, a trivalent metal like neodymium can be used. Thermal decomposition of Nd-loaded resin in air has been studied by Hale. Process conditions were established for resin decomposition and the formation of Nd{sub 2}O{sub 3} particles. The intermediate product compounds were described using x-ray diffraction (XRD) and wet chemistry. Leskela and Niinisto studied the decomposition of rare earth (RE) elements and found results consistent with Hale. Picart et al. demonstrated the viability of using a resin loading process for the fabrication of uranium-actinide mixed oxide microspheres for transmutation of minor actinides in a fast reactor. For effective transmutation of actinides, it will be desirable to extend the in-reactor burnup and minimize the number of recycles of used actinide materials. Longer burn times increases the chance of Fuel Clad Chemical or Mechanical Interaction (FCCI, FCMI). Sulfur is suspected of contributing to Irradiation Assisted Stress Corrosion Cracking (IASCC) thus it is necessary to maximize the removal of sulfur during decomposition of the resin. The present effort extends the previous work by quantifying the removal of sulfur during the decomposition process. Neodymium was selected as a surrogate for trivalent actinide metal cations. As described above Nd was dissolved in nitric acid solution then contacted with the AG-50W resin column. After washing the column, the Nd-resin particles are removed and dried. The Nd-resin, seen in Figure 1 prior to decomposition, is ready to be converted to Nd oxide microspheres.

americium↗

Benchmarking ADMM in Nonconvex NLPs

Here, we study connections between the alternating direction method of multipliers (ADMM), the classical method of multipliers (MM), and progressive hedging (PH). The connections are used to derive benchmark metrics and strategies to monitor and accelerate convergence and to help explain why ADMM and PH are capable of solving complex nonconvex NLPs. Specifically, we observe that ADMM is an inexact version of MM and approaches its performance when multiple coordination steps are performed. In addition, we use the observation that PH is a specialization of ADMM and borrow Lyapunov function and primal-dual feasibility metrics used in ADMM to explain why PH is capable of solving nonconvex NLPs. This analysis also highlights that specialized PH schemes can be derived to tackle a wider range of stochastic programs and even other problem classes. Our exposition is tutorial in nature and seeks to to motivate algorithmic improvements and new decomposition strategies.

42 ENGINEERING↗

White luminescence from CdS nanocrystals under the blue light excitation

Trap-rich CdS nanocrystals were synthesized by employing CdSt{sub 2} and sulfur as precursors via thermal decomposition. Furthermore, X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), absorption and photoluminescence (PL) spectra were used to characterize structure, morphology and luminescence properties of CdS nanocrystals (NCs). CdS NCs have a broad emission across 500–700 nm under the excitation of blue light with 460 nm, consequently, white light can be produced by mixing broad emission from CdS NCs excited by blue light, with the remaining blue light. In addition, the broad emission generation is closely and inseparably related to surface defects. Moreover, LaMer model was used to explain the phenomenon that the intensity of the trap emission gradually decreases as the reaction time increases in contrast with that of the band-edge emission. - Graphical abstract: Trap-rich CdS nanocrystals were synthesized. Furthermore, white light is produced by mixing broad emission across 500–700 nm from CdS NCs excited by blue light, in combination with the remaining blue light. - Highlights: • Trap-rich CdS nanocrystals were synthesized. • CdS NCs have a broad emission across 500–700 nm under the excitation of blue light. • White light can be produced by mixing broad emission with the remaining blue light.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Process for capturing CO{sub 2} arising from the calcination of the CaCO{sub 3} used in cement manufacture

This paper outlines a new CaCO{sub 3} calcination method for producing a stream of CO{sub 2} (suitable for permanent geological storage after purification and compression). The process is based on the use of very hot CaO particles (T {gt} 1000{sup o}C) to transfer heat from a circulating fluidized bed combustor (CFBC) to a calciner (fluidized with CO{sub 2} and/or steam). Since the fluidized bed combustor and calciner have separate atmospheres, the CO{sub 2} resulting from the decomposition of CaCO{sub 3} can be captured, while the CO{sub 2} generated in the combustion of the fuel in air is emitted to the atmosphere. We demonstrate that with this system it is possible to reduce the CO{sub 2} emissions of a cement plant by around 60%. Furthermore, since the key pieces of equipment are similar to the commercial CFBCs used in power generation plants, it is possible to establish the additional investment required for the system and to estimate the cost per ton of CO{sub 2} avoided for this process to be about 19 $/tCO{sub 2} avoided. 19 refs., 4 figs.

01 COAL, LIGNITE, AND PEAT↗

Multiferroic and magnetoelectric properties of CoFe{sub 2}O{sub 4}/Pb{sub 1−x}Sr{sub x}TiO{sub 3} composite films

To realize multiferroic and magnetoelectric properties, bi-layered nanocomposite films consisting of CoFe{sub 2}O{sub 4} (CFO)/Pb{sub 1−x}Sr{sub x}TiO{sub 3} (PST) phases (x = 0.1, 0.2, and 0.3) have been deposited on Pt/TiO{sub 2}/SiO{sub 2}/Si substrate by using a metallo-organic decomposition process. Both the PST perovskite and the CFO spinel phases are confirmed from X-ray diffraction patterns and Raman spectra of the composite films. The composite films exhibit room temperature multiferroic properties. The values of saturation magnetization (M{sub s}), remanent magnetization (M{sub r}), and coercive field (H{sub c}) of the composite films are in the range of 108–119 kA/m, 42–51 kA/m, and 44.5–64.1 kA/m, respectively. In addition, the saturation polarization (P{sub s}), remanent polarization (P{sub r}), and electrical coercive field (E{sub c}) are observed in the range of 11.3–14.4 μC/cm{sup 2}, 2.9–4.8 μC/cm{sup 2}, and 56–59.5 kV/cm, respectively. The dielectric response in the presence of applied magnetic field, H{sub dc} ∼ 238.6 kA/m shows a high magnetocapacitance value ∼385% at frequency 100 kHz for CFO/PST composite film with x = 0.1. The maximum magnetoelectric voltage co-efficient value, α{sub E} ∼ 380 kV/(m × T) has been achieved in the composite films with x = 0.1. The influence of elastic/and or interfacial strain on multiferroic magnetoelectric properties is evident from the results.

36 MATERIALS SCIENCE↗

Novel Low-Density Ablators Containing Hyperbranched Poly(azomethine)s

An ablative composite is low-density (0.25 to 0.40 g/cu cm), easy to fabricate, and superior to the current state-of-the-art ablator (phenolic impregnated carbon ablator, PICA) in terms of decomposition temperature, char yield, and mechanical strength. Initial ablative testing with a CO2 laser under high-heat-flux (1,100 W/sq cm) conditions showed these new ablators are over twice as effective as PICA in terms of weight loss, as well as transfer of heat through the specimen. The carbon fiber/poly(azomethine) composites have the same density as PICA, but are 8 to 11 times stronger to irreversible breaking by tensile compression. In addition, polyazomethine char yields by thermogravimetric analysis are 70 to 80 percent at 1,000 C. This char yield is 10 to 20 percent higher than phenolic resins, as well as one of the highest char yields known for any polymer. A high char yield holds the composite together better toward shearing forces on reentry, as well as reradiates high heat fluxes. This innovative composite is stronger than PICA, so multiple pieces can be sealed together without fracture. Researchers have also studied polyazomethines before as linear polymers. Due to poor solubility, these polymers precipitate from the polymerization solvent as a low-molecular-weight (2 to 4 repeat units) powder. The only way found to date to keep linear polyazomethines in solution is by adding solubilizing side groups. However, these groups sacrifice certain polymer properties. These hyperbranched polyazomethines are high molecular weight and fully aromatic.

Tigelaar, Dean↗

Crystal structure, microstructure and reducibility of LaNi{sub x}Co{sub 1-x}O{sub 3} and LaFe{sub x}Co{sub 1-x}O{sub 3} Perovskites (0<x<=0.5)

Nickel and iron substituted LaCoO{sub 3} with rhombohedrally distorted perovskite structure were obtained in the temperature range of 600-900 deg. C by thermal decomposition of freeze-dried citrates and by the Pechini method. The crystal structure, morphology and defective structure of LaCo{sub 1-x}Ni{sub x}O{sub 3} and LaCo{sub 1-x}Fe{sub x}O{sub 3} were characterized by X-ray diffraction and neutron powder diffraction, TEM and SEM analyses and electron paramagnetic resonance spectroscopy. The reducibility was tested by temperature programmed reduction with hydrogen. The products of the partial and complete reduction were determined by ex-situ XRD experiments. The replacement of Co by Ni and Fe led to lattice expansion of the perovskite structure. For perovskites annealed at 900 deg. C, there was a random Ni, Fe and Co distribution. The morphology of the perovskites does not depend on the Ni and Fe content, nor does it depend on the type of the precursor used. LaCo{sub 1-x}Ni{sub x}O{sub 3} perovskites (x>0.1) annealed at 900 deg. C are reduced to Co/Ni transition metal and La{sub 2}O{sub 3} via the formation of oxygen deficient Brownmillerite-type compositions. For LaCo{sub 1-x}Ni{sub x}O{sub 3} annealed at 600 deg. C, Co/Ni metal, in addition to oxygen-deficient perovskites, was formed as an intermediate product at the initial stage of the reduction. The interaction of LaCo{sub 1-x}Fe{sub x}O{sub 3} with H{sub 2} occurs by reduction of Co{sup 3+} to Co{sup 2+} prior to the Fe{sup 3+} ions. The reducibility of Fe-substituted perovskites is less sensitive towards the synthesis procedure in comparison with that of Ni substituted perovskites. - Graphical abstract: LaCo{sub 1-x}Ni{sub x}O{sub 3} and LaCo{sub 1-x}Fe{sub x}O{sub 3} with rhombohedrally distorted perovskite structure were obtained in the temperature range of 600-900 deg. C by thermal decomposition of freeze-dried La-Co/Ni(Fe)-citrates and by the Pechini method. The complete reduction of LaCo{sub 1-x}Ni{sub x}O{sub 3} with H{sub 2} proceeds to Co/Ni-metal and La{sub 2}O{sub 3}, while the interaction of LaCo{sub 1-x}Fe{sub x}O{sub 3} with H{sub 2} is not complete up to 700 deg. C. For LaCo{sub 1-x}Fe{sub x}O{sub 3}, the reaction proceeds by preferential oxidation of Co{sup 3+} to Co{sup 2+} without affecting Fe{sup 3+} ions.

36 MATERIALS SCIENCE↗

Transverse Vector Decomposition Method for Analytical Inversion of Exoplanet Transit Spectra

Abstract We develop a new method for analytical inversion of binned exoplanet transit spectra and for retrieval of planet parameters. The method has a geometrical interpretation and treats each observed spectrum as a single vector r → in the multidimensional spectral space of observed bin values. We decompose the observed r → into two orthogonal components: a wavelength-independent component r → ∥ corresponding to the spectral mean across all observed bins, and a transverse component r → ⊥ that is wavelength dependent and contains the relevant information about the atmospheric chemistry. The method allows us to extract, without any prior assumptions or additional information, the relative mass (or volume) mixing ratios of the absorbers in the atmosphere, the scale height to stellar radius ratio, H / R S , and the atmospheric temperature. The method is illustrated and validated with several examples of increasing complexity.

79 ASTRONOMY AND ASTROPHYSICS↗

An approach to identifying fibers and evolved compounds from flame resistant fabrics

Flame resistant (FR) fabrics have use in civilian, military, and industrial applications. Herein, this work describes the development of a methodology aimed at identifying the fiber composition of blended fabrics of unknown composition. Here, FR fabrics used in military uniforms, are studied using a combination of X-ray photoelectron spectroscopy (XPS), isothermal thermogravimetric analysis (TGA) and pyrolysis gas chromatography/mass spectrometry (Py-GC-MS). Elemental analysis of the fabrics using XPS yielded a preliminary determination of the composition of the polymer(s) and aided in the identification of FR additives. TGA and Py-GC-MS experiments were used for subsequent compound identification. In TGA the temperature of mass loss events was compared to reference materials, and in Py-GC-MS the pyrolysis products of the blended FR fabrics were compared to those from a series of potential parent fibers. It was possible to discern the composition of the parent fibers and the type of FR treatment added to fabrics because the thermal decomposition chemistry did not significantly change by blending the fibers to make fabrics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

PMU-Based Decoupled State Estimation for Unsymmetrical Power Systems

Modal decomposition of measurement equations has already been shown to simplify the formulation and resulting computational complexity of three-phase state estimation of systems where all the transmission lines are three-phase and fully transposed. When there are non-transposed and/or mixed-phase lines, modal decomposition can no longer fully decouple the threephase measurement equations. Here, this paper addresses the above shortcoming by proposing a simple yet practical solution based on the commonly used numerical compensation techniques. Thus, it enables application of the powerful decoupling approach to any type of three-phase networks which may contain non-transposed or mixed-phase lines and are fully observable by PMUs. The proposed procedure modifies the measurement set by deriving additive terms that compensate for the neglected unsymmetrical effects. It will be shown that unbalanced systems including nontransposed and mixed-phase elements, can still be transformed into three decoupled subsystems and solved in parallel by the proposed approach. Performance of the proposed algorithm is validated against several IEEE test cases.

42 ENGINEERING↗

Taxonomic patterns in the nitrogen assimilation of soil prokaryotes

Summary Nitrogen (N) is frequently a limiting nutrient in soil; its availability can govern ecosystem functions such as primary production and decomposition. Assimilation of N by microorganisms impacts the availability of N in soil. Despite its established ecological significance, the contributions of microbial taxa to N assimilation are unknown. Here we measure N uptake and use by microbial phylotypes and taxonomic groups within a diverse assemblage of soil microbes through quantitative stable isotope probing (qSIP) with 15 N. Following incubation with 15 , distinct patterns of 15 N assimilation among taxonomic groups were observed. For instance, glucose addition stimulated 15 N assimilation in most members of Actinobacteria and Proteobacteria but generally decreased 15 N use by Firmicutes and Bacteriodetes. While is considered a preferred and universal source of N to prokaryotes, the majority (> 80%) of N assimilation in our soils could be attributed to a handful of active orders. Characterizing N assimilation of taxonomic groups with 15 N qSIP may provide a basis for understanding how microbial community composition influences N availability in the environment.

Morrissey, Ember M.↗

Mesoscale Interfacial Dynamics in Magnetoelectric Nanocomposites (Three Years’ Report)

Theory and modeling of chessboard-like self-assembling of vertically aligned columnar nanostructures in films has been developed. By means of modeling and three-dimensional computational simulations, we proposed a novel self-assembly process that can produce good chessboard nanostructure architectures through a pseudo-spinodal decomposition of an epitaxial film under optimal thermodynamic and crystallographic conditions (appropriate choice of the temperature, composition of the film, and crystal lattice parameters of the film and substrate). These conditions are formulated. The obtained results have been published on Nano Letters. Based on the principles of the formation of chessboard nanostructured films, we are currently trying to find good decomposing material systems that satisfy the optimal conditions to produce the chessboard nanostructure architecture. In addition we are under way doing 'computer experiments' to look for the appropriate materials with the chessboard columnar nanostructures, as a potential candidate for engineering of optical devices, high-efficiency multiferroics, and high-density magnetic perpendicular recording media. We are also currently to investigate the magnetoelectric response of multiferroic chessboard nanostructures under applied electric/magnetic fields. A unified 3-dimensional phase field theory of the strain-mediated magnetoelectric effect in magnetoelectric composites is developed. The theory is based on the established equivalency paradigm: we proved that by using a variational priciple the exact values of the electric, magnetic and strain fields in a magnetoelectric composite of arbitrary morphology and their coupled magneto-electric-mechanical response can be evaluated by considering an equivalent homogeneous system with the specially chosen effective eigenstrain, polarization and magnetization. These equivalency parameters are spatially inhomogeneous fields, which are obtained by solving the time-dependent Ginzburg-Landau equations. The paper summarizing these results is to be submitted to JAP. We are currently using the computational model based on the unified phase field theory to predict the local and overall response of the magnetoelectric composites with arbitrary configuration under applied fields, and to find the optimal composite microstructure that produces the strongest ME coupling. We have developed modeling and simulations to support Dr. S. Pryia efforts to produce the strongest ME coupling by searching the optimal configuration of applied electric/magnetic fields, and microstructure of polycrystalline multiferroics. An analytical model demonstrates that the optimization of a magnetoelectric (ME) coupling of a laminar magnetic/piezoelectric polycrystalline composite could be obtained by a proper choice of the magnetic and electric poling directions and the directions of the applied a.c. fields. The results have been published on JAP. Our next step is to determine the domain of optimal parameters and configurations by using our optimization theory and computational modeling.

77 NANOSCIENCE AND NANOTECHNOLOGY↗