Search NASA⌕ Search

SEARCH · Search NASA

Results for “Analytical Method Development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Methods and Piezoelectric Imbedded Sensors for Damage Detection in Composite Plates Under Ambient and Cryogenic Conditions

New methods for structural health monitoring are being assessed, especially in high-performance, extreme environment, safety-critical applications. One such application is for composite cryogenic fuel tanks. The work presented here attempts to characterize and investigate the feasibility of using imbedded piezoelectric sensors to detect cracks and delaminations under cryogenic and ambient conditions. A variety of damage detection methods and different Sensors are employed in the different composite plate samples to aid in determining an optimal algorithm, sensor placement strategy, and type of imbedded sensor to use. Variations of frequency, impedance measurements, and pulse echoing techniques of the sensors are employed and compared. Statistical and analytic techniques are then used to determine which method is most desirable for a specific type of damage. These results are furthermore compared with previous work using externally mounted sensors. Results and optimized methods from this work can then be incorporated into a larger composite structure to validate and assess its structural health. This could prove to be important in the development and qualification of any 2" generation reusable launch vehicle using composites as a structural element.

Engberg, Robert↗

Injection Induced Mixing in Flows Separating From Smooth Surfaces

An analytic model for predicting the effect of unsteady local surface injection on the flow separating from a streamlined body at angle of attack is proposed. The model uses the premise that separation control results from enhanced mixing along the shear layer that develops between the main stream and the fluid in the underlying recirculation zone. High-Reynolds-number asymptotic methods are used to connect the unsteady surface injection to an instability wave propagating on the separating shear layer and then to the large-scale coherent structures that produce the increased mixing. The results is a tool that can guide the choice of fluid-actuator parameters to maximize flow-control effectiveness and may also facilitate computer-based numerical experiments.

Adamczyk, John J.↗

Investigation of Methods for the Structural Weight Analysis of a Mach 2.4 Axisymmetric Inlet

Structural design and analysis tools appropriate for estimating the structural weight of an axisymmetric inlet designed for Mach 2.4 cruise were evaluated. Little information regarding the inlet mechanical design is available in the preliminary design phase, so it is necessary to first develop a reasonable structural design before estimating the inlet weight. The Internally Pressurized Structure Synthesis and Optimization (IPSSO) program, employing an analytical approach, was chosen for evaluation due to its combined design and analysis capabilities. The inlet design produced by IPSSO was then analyzed using the NASTRAN finite element program. The finite element analysis was performed to help identify the limitations of the analytically based code as well as to evaluate NASTRAN for this application. Comparison between the IPSSO inlet weight and that of a similar inlet developed by the Boeing Commercial Airplane Group was also made. Program evaluation concluded that the combined use of IPSSO to create an initial design and NASTRAN to perform a numerical analysis would provide the capability to evaluate a limited number of inlet design The development of a new tool for the minimum weight design and analysis of inlet structures would be required for greater flexibility in evaluating inlet conceptual designs.

Nadell, Shari-Beth↗

Detecting Organic Compounds in Martian Soil Analogues Using Gas Chromatography Mass Spectrometry

One of the primary objectives of the 1976 Viking missions was to determine whether organic compounds, possibly of biological origin, were present in the Martian surface soils. The Viking gas chromatography mass spectrometry (GCMS) instruments found no evidence for any organic compounds of Martian origin above a few parts per billion in the upper 10 cm of surface soil [l], suggesting the absence of a widely distributed Martian biota. However, Benner et d. have suggested that significant amounts of non-volatile organic compounds, possibly including oxidation products of bioorganic molecules (e.g. carboxylic acids) would not have been detected by the Viking GCMS [2]. Moreover, other key organic compounds important to biology, such as amino acids and nucleobases, would also likely have been missed by the Viking GCMS as these compounds require chemical derivatization to be stable in a GC column [3]. Recent pyrolysis experiments with a Mars soil analogue that had been innoculated with Escherichia coli bacteria have shown that amino acid decomposition products (amines) and nucleobases are among the most abundant products generated after pyrolysis of the bacterial cells [4,5]. At the part per billion level (Viking GCMS detection limit), these pyrolysis products generated from several million bacterial cells per gram of Martian soil would not have been detected by the Viking GCMS instruments [4]. Analytical protocols are under development for upcoming in situ lander opportunities to target several important biological compounds including amino acids and nucleobases. For example, extraction and chemical derivatization techniques [3] are being adapted for space flight use to transform reactive or fragile molecules that would not have been detected by the Viking GCMS instruments, into species that are sufficiently volatile to be detected by GCMS. Recent experiments carried out at NASA Goddard have shown that using this derivatization technique all of the targeted compounds mentioned above can be separated on a GC column and detected by MS at sub-picomole (< 10(exp -l2 mole) levels. With these methods, the detection limit for amino acids, carboxylic acids and nucleobases is several orders of magnitude more sensitive than the Viking GCMS instruments for these compounds. Preliminary results using this analytical technique on a variety of Martian soil analogues will be presented.

Glavin, D. P.↗

Engineering and programming manual: Two-dimensional kinetic reference computer program (TDK)

The Two Dimensional Kinetics (TDK) computer program is a primary tool in applying the JANNAF liquid rocket thrust chamber performance prediction methodology. The development of a methodology that includes all aspects of rocket engine performance from analytical calculation to test measurements, that is physically accurate and consistent, and that serves as an industry and government reference is presented. Recent interest in rocket engines that operate at high expansion ratio, such as most Orbit Transfer Vehicle (OTV) engine designs, has required an extension of the analytical methods used by the TDK computer program. Thus, the version of TDK that is described in this manual is in many respects different from the 1973 version of the program. This new material reflects the new capabilities of the TDK computer program, the most important of which are described.

Nickerson, G. R.↗

Extension of state-vector splitting to the Navier-Stokes equations

A multi-dimensional upwind scheme for solving the Euler equations has been extended to solve the Navier-Stokes equations. These methods share the property of not requiring body-fitted computational grids. A time advance scheme which is second-order accurate in time and space has been developed for use in conjunction with state-vector splitting to accurately resolve regions with significant gradients in flow quantities. The scheme has been tested on several simple viscous flow problems for which analytic solutions are known; the agreement of computation with theory is excellent.

Gooch, Carl F.↗

Experimental facilities for system identification

Future space vehicles will differ significantly from the space systems used in the past. The planned spacecraft configurations will include extremely large structures, up to 100-200 meters across. Because the allowable launch weights are limited, the large space structures must be constructed of lightweight, flexible elements, and active control of the shape and attitude of the spacecraft will be required. The behavior of large structures is characterized by many closely spaced natural modes, and some applications may also include large on-board disturbances. Consequently, the control and disturbance forces will invariably spill over to a large number of modes. Structural identification will be necessary for precision pointing and shape controls to be effective. An accurate mathematical model of a structure is essential for the success of precision control system design. However, the currently available analytical modeling codes, such as NASTRAN, are incapable of producing numerical models of the required precision. The favored approach for model determination is to refine the mathematical model based on experiments in the orbital environment. It is to this effect that we must develop techniques to reliably generate the accurate models required for future missions, and the arena in which these methods will be developed and proved is through ground-based system identification experiments and demonstrations. The Air Force Astronautics Laboratory (AFAL) has expanded the on-site ground-test facilities in recent years, and additional sites are planned for the immediate future. We shall review the plans for laboratory growth at AFAL with regard to the type of experiments proposed and the availability of the new facilities.

Das, Alok↗

Pollution Monitoring: An Engineering Challenge

One purpose in presenting this material is to bring to the attention of engineers background material which they would not normally encounter in the course of routine development work. An excellent and timely reference is as follows: Seminar on Methods of Detection, Measurement and Monitoring of Pollutants in the Marine Environment. The international seminar was organized by FAO with the support of UNESCO, IAEA, SCOR and WMO, and was held in Rome, Italy, 4-10 December 1970. The final report, the title of which was given, is a very thoroughgoing document and certainly a must reference for anyone seriously considering the development of sensors for pollution measurement. Perhaps it would be appropriate to present some exact quotations selected from the referenced document. The quotations follow: 1) "The pressures to develop sensitive and reliable methods come about when those responsible for the management of our environment need an objective evaluation of existing or potential perils." 2) "Nearly all of the Panels concerned with the contaminants identified specific examples of man's waste products which may be leaking to the environment in substantial quantities and for which as yet there are no analytical techniques available ". 3) "Very few analyses for organochlorine pesticides appear to have been carried out on sea water and the panel considered that the present methodology was not capable of detecting, on a routine basis, the quantities of these compounds in open sea waters." and 4) "This corresponds essentially to the ratio of useful data produced to the labour expended, since instrumentation costs in the long run become negligible."

Snodgrass, J. M.↗

A Historical Perspective on Dynamics Testing at the Langley Research Center

The experience and advancement of Structural dynamics testing for space system applications at the Langley Research Center of the National Aeronautics and Space Administration (NASA) over the past four decades is reviewed. This experience began in the 1960's with the development of a technology base using a variety of physical models to explore dynamic phenomena and to develop reliable analytical modeling capability for space systems. It continued through the 1970's and 80's with the development of rapid, computer-aided test techniques, the testing of low-natural frequency, gravity-sensitive systems, the testing of integrated structures with active flexible motion control, and orbital flight measurements, It extended into the 1990's where advanced computerized system identification methods were developed for estimating the dynamic states of complex, lightweight, flexible aerospace systems, The scope of discussion in this paper includes ground and flight tests and summarizes lessons learned in both successes and failures.

Horta, Lucas G.↗

Rotor/Wing Interactions in Hover

Hover predictions of tiltrotor aircraft are hampered by the lack of accurate and computationally efficient models for rotor/wing interactional aerodynamics. This paper summarizes the development of an approximate, potential flow solution for the rotor-on-rotor and wing-on-rotor interactions. This analysis is based on actuator disk and vortex theory and the method of images. The analysis is applicable for out-of-ground-effect predictions. The analysis is particularly suited for aircraft preliminary design studies. Flow field predictions from this simple analytical model are validated against experimental data from previous studies. The paper concludes with an analytical assessment of the influence of rotor-on-rotor and wing-on-rotor interactions. This assessment examines the effect of rotor-to-wing offset distance, wing sweep, wing span, and flaperon incidence angle on tiltrotor inflow and performance.

Young, Larry A.↗

Dynamic Analysis of Large In-Space Deployable Membrane Antennas

This paper presents a vibration analysis of an eight-meter diameter membrane reflectarray antenna, which is composed of a thin membrane and a deployable frame. This analysis process has two main steps. In the first step, a two-variable-parameter (2-VP) membrane model is developed to determine the in-plane stress distribution of the membrane due to pre-tensioning, which eventually yields the differential stiffness of the membrane. In the second step, the obtained differential stiffness is incorporated in a dynamic equation governing the transverse vibration of the membrane-frame assembly. This dynamic equation is then solved by a semi-analytical method, called the Distributed Transfer Function Method (DTFM), which produces the natural frequencies and mode shapes of the antenna. The combination of the 2-VP model and the DTFM provides an accurate prediction of the in-plane stress distribution and modes of vibration for the antenna.

vibrations↗

Accuracy analysis of the semi-analytical method for shape sensitivity calculation

The semianalytical method of design sensitivity analysis that is widely used for calculating derivatives of static response with respect to design variables for structures modeled by finite elements is studied. It is shown that the method can have serious accuracy problems for shape design variables in structures modeled by beam, plate, truss, frame, and solid elements. Errors are shown to be associated with an incompatibility of the sensitivity field with the structure. An error index is developed to test the accuracy of the semianalytical method. It characterizes the difference in errors between a general finite-difference method and the semianalytical method. A method for improving the accuracy of the semianalytical method (when possible) is provided. Examples are presented to demonstrate the use of the error index.

Barthelemy, Bruno↗

A substructure energy method for prediction of Space Shuttle modal damping

The results of this program demonstrate the validity of a dissipative energy approach for predicting the damping of a four-component Space Shuttle model by means of modal parameters obtained from tests of the individual components. A relationship between modal damping energy per cycle and peak strain (or kinetic) energy is first determined empirically from test data for each component. Undamped analytical models of each component are also developed, and combined into a system model from which are obtained modal kinetic (or strain) energies for its respective modes. These data are then used with the empirical damping curves to apportion the proper amount of damping energy to each component in a combined system mode, and thereby allow a prediction of damping ratio.

Kana, D. D.↗

Cultivating an Emergent Earth Observation Analytics Ecosystem in the Cloud

A diverse set of data analytics systems for Earth Observations are sprouting up in the Earth Science community, with a wealth of processing algorithms and analysis methods. There is a similar wealth of data resources available via myriad data providers and clearinghouses, including large institutional systems like the Earth Observing System Data and Information System, Comprehensive Large Scale Array-data Stewardship System, and Federated Earth Observation Missions gateway. With Earth system science driving a need to work with more datasets together, and the community developing more analysis tools (some of them dataset-specific), how can we develop analysis workflows that incorporate far-flung datasets and leverage analysis resources from multiple organizations? Cloud computing points the way toward a solution in two different respects. Firstly, the access to and abstraction of virtually unlimited storage and computing power provides an environment that enables more straightforward means of pulling datasets and analysis resources together. Just as importantly, however, cloud computing serves as an example of an "ecosystem" of interoperating services, since the essence of cloud computing is the presentation of all resources as a service, from hardware to infrastructure to platform to software. This enables the combination of off-the-shelf, diverse services to construct entire systems that emerge out of an equally diverse community of architects and developers. This approach can be similarly applied to the data and analysis resources in the Earth Observation community. By exposing these resources via well understood services, and consuming resources in the same way, different organizations can construct bespoke analysis workflows and systems for their own purposes. The key leap the community needs to make is to develop analysis systems in components that interact with other components via services. The result would be a rich ecosystem of analytics components that can be combined to analyze datasets at scale and in conjunction with other datasets from other sources.

chaos↗

Nonlinear effects on sound propagation through high subsonic Mach number flows in variable area ducts

A nonlinear theory for sound propagation in variable area ducts carrying a nearly sonic flow is presented. Linear acoustic theory is shown to be singular and the detailed nature of the singularity is used to develop the correct nonlinear theory. The theory is based on a quasi-one dimensional model. It is derived by the method of matched asymptotic expansions. In a nearly chocked flow, the theory indicates the following processes to be acting: a transonic trapping of upstream propagating sound causing an intensification of this sound in the throat region of the duct; generation of superharmonics and an acoustic streaming effect; development of shocks in the acoustic quantities near the throat. Several specific problems are solved analytically and numerical parameter studies are carried out. Results indicate that appreciable acoustic power is shifted to higher harmonics as shocked conditions are approached. The effect of the throat Mach number on the attenuation of upstream propagating sound excited by a fixed source is also determined.

Callegari, A. J.↗

Investigation of gas/particle heat transfer rates in solid rocket motors

The ability of the current Nusselt number prediction technique developed by Kavanau (1955) to accurately predict alumina particle heat transfer rates in solid rocket nozzles and plumes is investigated. For the solid rocket motors SRMS) analyzed, the transitional regime is the dominant regime for the majority of particles in the flowfield. The analytical approach to determine accuracy of the Kavanau correlation utilized the G2R Direct Simulation Monte Carlo code. With this method, both sphere drag, and heat transfer rates were predicted. The sphere drag prediction were compared to the Hermsen, and Henderson drag correlations, while the heat transfer results were compared to the current theory. Results have indicated, that the predicted drag coefficient is bounded by the drag correlations considered. However, the Nusselt number varies significantly from the extrapolated profile through all flowfield regimes.

Moylan, B.↗

Analytical estimates of radial segregation in Bridgman growth from low-level steady and periodic accelerations

Approximate analytical solutions are developed that are mathematically tractable but provide the elements of CFD models for estimating convective flows subjected to low-level accelerations. The estimates are applicable to dilute systems that have horizontal temperature gradients in the vertical Bridgman configuration. The Navier-Stokes momentum equation is solved in 1D and subsequently in 2D by the first-order perturbation method. The analysis used is the case of plane-front solidification of a dilute system in the vertical thermally stable configuration. The model is found to predict the degree of radial segregation within a factor of two for a range of material and processing parameters. The method provides detailed information on the effects of processing on solute distribution in the grown crystal which are of interest in the orbital experiments emphasizing the control of radial segregation.

Naumann, Robert J.↗

The analytical representation of viscoelastic material properties using optimization techniques

This report presents a technique to model viscoelastic material properties with a function of the form of the Prony series. Generally, the method employed to determine the function constants requires assuming values for the exponential constants of the function and then resolving the remaining constants through linear least-squares techniques. The technique presented here allows all the constants to be analytically determined through optimization techniques. This technique is employed in a computer program named PRONY and makes use of commercially available optimization tool developed by VMA Engineering, Inc. The PRONY program was utilized to compare the technique against previously determined models for solid rocket motor TP-H1148 propellant and V747-75 Viton fluoroelastomer. In both cases, the optimization technique generated functions that modeled the test data with at least an order of magnitude better correlation. This technique has demonstrated the capability to use small or large data sets and to use data sets that have uniformly or nonuniformly spaced data pairs. The reduction of experimental data to accurate mathematical models is a vital part of most scientific and engineering research. This technique of regression through optimization can be applied to other mathematical models that are difficult to fit to experimental data through traditional regression techniques.

Hill, S. A.↗