Search NASA⌕ Search

SEARCH · Search NASA

Results for “Connection length”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,325 records · Page 74

Enabling IP Header Compression in COTS Routers via Frame Relay on a Simplex Link

NASA is moving toward a networkcentric communications architecture and, in particular, is building toward use of Internet Protocol (IP) in space. The use of IP is motivated by its ubiquitous application in many communications networks and in available commercial off-the-shelf (COTS) technology. The Constellation Program intends to fit two or more voice (over IP) channels on both the forward link to, and the return link from, the Orion Crew Exploration Vehicle (CEV) during all mission phases. Efficient bandwidth utilization of the links is key for voice applications. In Voice over IP (VoIP), the IP packets are limited to small sizes to keep voice latency at a minimum. The common voice codec used in VoIP is G.729. This new algorithm produces voice audio at 8 kbps and in packets of 10-milliseconds duration. Constellation has designed the VoIP communications stack to use the combination of IP/UDP/RTP protocols where IP carries a 20-byte header, UDP (User Datagram Protocol) carries an 8-byte header, and RTP (Real Time Transport Protocol) carries a 12-byte header. The protocol headers total 40 bytes and are equal in length to a 40-byte G.729 payload, doubling the VoIP latency. Since much of the IP/UDP/RTP header information does not change from IP packet to IP packet, IP/UDP/RTP header compression can avoid transmission of much redundant data as well as reduce VoIP latency. The benefits of IP header compression are more pronounced at low data rate links such as the forward and return links during CEV launch. IP/UDP/RTP header compression codecs are well supported by many COTS routers. A common interface to the COTS routers is through frame relay. However, enabling IP header compression over frame relay, according to industry standard (Frame Relay IP Header Compression Agreement FRF.20), requires a duplex link and negotiations between the compressor router and the decompressor router. In Constellation, each forward to and return link from the CEV in space is treated independently as a simplex link. Without negotiation, the COTS routers are prevented from entering into the IP header compression mode, and no IP header compression would be performed. An algorithm is proposed to enable IP header compression in COTS routers on a simplex link with no negotiation or with a one-way messaging. In doing so, COTS routers can enter IP header compression mode without the need to handshake through a bidirectional link as required by FRF.20. This technique would spoof the routers locally and thereby allow the routers to enter into IP header compression mode without having the negotiations between routers actually occur. The spoofing function is conducted by a frame relay adapter (also COTS) with the capability to generate control messages according to the FRF.20 descriptions. Therefore, negotiation is actually performed between the FRF.20 adapter and the connecting COTS router locally and never occurs over the space link. Through understanding of the handshaking protocol described by FRF.20, the necessary FRF.20 negotiations messages can be generated to control the connecting router, not only to turn on IP header compression but also to adjust the compression parameters. The FRF.20 negotiation (or control) message is composed in the FRF.20 adapter by interpreting the incoming router request message. Many of the fields are simply transcribed from request to response while the control field indicating response and type are modified.

Nguyen, Sam P.↗

SISGR: Atom chip microscopy: A novel probe for strongly correlated materials

Microscopy techniques co-opted from nonlinear optics and high energy physics have complemented solid-state probes in elucidating the order manifest in condensed matter materials. Up until now, however, no attempts have been made to use modern techniques of ultracold atomic physics to directly explore properties of strongly correlated or topologically protected materials. Our current program is focused on introducing a novel magnetic field microscopy technique into the toolbox of imaging probes. Our prior DOE ESPM program funded the development of a novel instrument using a dilute gas Bose-Einstein condensate (BEC) as a scanning probe capable of measuring tiny magnetic (and electric) DC and AC fields above materials. We successfully built the world's first “scanning cryogenic atom chip microscope”, and we now are in the process of characterizing its performance before using the instrument to take the first wide-area images of transport flow within unconventional superconductors, pnictides and oxide interfaces (LAO/STO), topological insulators, and colossal magnetoresistive manganites. We will do so at temperatures outside the capability of scanning SQUIDs, with ~10x better resolution and without 1/f-noise. A notable goal will be to measure the surface-to-bulk conductivity ratio in topological insulators in a relatively model-independent fashion. We have completed the construction of this magnetic microscope. The instrument uses atom chips—substrates supporting micron-sized current-carrying wires that create magnetic microtraps near surfaces for ultracold thermal gases and BECs—to enable single-shot and raster-scanned large-field-of-view detection of magnetic fields. The fields emanating from electronic transport may be detected at the 10 -7 flux quantum (Φ0) level and below; that is, few to sub-micron resolution of sub-nanotesla fields over single-shot, millimeter-long detection lengths. By harnessing the extreme sensitivity of atomic clocks and BECs to external perturbations, we are now in a position to use atom chips for imaging transport in new regimes. Scanning quantum gas atom chip microscopy introduces three very important features to the toolbox of high-resolution scanning microscopy of strongly correlated or topological materials: simultaneous detection of magnetic and electric fields (down to the sub-single electron charge level; no invasive large magnetic fields or gradients; simultaneous micro- and macroscopic spatial resolution; DC to MHz detection bandwidth; freedom from 1/ƒ flicker noise at low frequencies; and, perhaps most importantly, the complete decoupling of probe and sample temperatures. The atom chip microscope can operate at maximum sensitivity and resolution without regard to the substrate temperature. While the BEC is among the coldest objects realizable (100 nK temperatures are typical), the atom chip substrate can be positioned 1 μm away from the BEC and be as hot as 400 K or as cold as the cryostat can cool. This is because unlike superconducting probes, whose temperature is closely coupled to nearby materials, quantum gases are immune to radiative heating. The energy gap between a Rb atom’s ground state and first excited state far exceeds the typical energy of room-temperature blackbody radiation; such atoms are therefore transparent to radiation heating by materials at room temperature or below. We experimentally demonstrated a new atom chip trapping system that allows the placement and high-resolution imaging of ultracold atoms within microns from any ≤100 μm-thin, UHV-compatible material, while also allowing sample exchange with minimal experimental downtime. The sample is not connected to the atom chip, allowing rapid exchange without perturbing the atom chip or laser cooling apparatus. Exchange of the sample and retrapping of atoms has been performed within a week turnaround, limited only by chamber baking. Moreover, the decoupling of sample and atom chip provides the ability to independently tune the sample temperature and its position with respect to the trapped ultracold gas, which itself may remain in the focus of a high-resolution imaging system. We confine 100-nK BECs of 104 87Rb atoms near a gold-mirrored 100-μm-thick silicon substrate. The substrate can be cooled to 35 K without use of a heat shield, while the atom chip, 120-μm away, remains at room temperature. Atoms may be imaged with 1-μm resolution and retrapped every 16 s, allowing rapid data collection. Straightforward improvements will allow us to push sample temperatures close to 4 K, and improve imaging resolution from 1 μm down to a few-100 nm, thereby providing 10 -9 Φ0 detection sensitivity. We will test the utility of this technique by imaging the magnetic fields emanating from electronic transport and domain percolation in several interesting examples of strongly correlated or topologically protected materials. STM, transport, and x-ray scattering experiments have, among others, revealed the existence of a quantum liquid crystal state in iron (pnictide) and cuprate superconductors. This strongly correlated state of matter could also be detected by imaging the fluctuating transport (spatially and in time) of electrons as the phase/regime boundary is crossed between the pnictide non-Fermi liquid (cuprate strange metal) and the pnictide magnetic phase (cuprate pseudogap regime). Our ability to image wide-area inhomogeneous current flow from room-temperature to <10 K will allow us to study the developing domain structure and transport near twin boundary interfaces through the T N ≈50–150 K nematic transition recently identified in bulk transport experiments by Ian Fisher's group in underdoped Fe-arsinide superconductors. Again, this highlights a main feature of our cryogenic atom chip microscope: the ability to image transport regardless of the sample temperature since the BEC, at nK temperatures, is transparent to blackbody radiation, even when held a microns from the surface.

36 MATERIALS SCIENCE↗

Interfacial Properties and Design of Functional Energy Materials

The vital importance of energy to society continues to demand a relentless pursuit of energy responsive materials that can bridge fundamental chemical structures at the molecular level and achieve improved functionality, such as efficient energy conversion/storage/transmission, over multiple length scales. This demand can potentially be realized by harnessing the power of self-assembly a spontaneous process where molecules or much larger entities form ordered aggregates as a consequence of predominately non-covalent (weak) interactions. Self-assembly is the key to bottom-up design of molecular devices, because the nearly atomic-level control is very difficult to realize in a top-down, e.g., lithographic approach. However, while function (e.g., charge mobility) in simple systems such as single crystals can often be predicted, predicting the function of the great variety of self-assembled molecular architectures is complicated by the lack of understanding and control over nanoscale interactions, mesoscale architectures, and macroscale (long-range) order. To establish a foundation toward delivering practical solutions, it is critical to develop an understanding of the chemical and physical mechanisms responsible for the self-assembly of molecular and hybrid materials on various substrates. Typically molecular self-assembly involves poorly understood non-covalent intermolecular and substrate-molecule interactions compounded by local and/or collective influences from the substrate atomic lattice (symmetry and/or topological features) and electronic structure. Thus, progress towards unraveling the underlying physicochemical processes that control the structure and macroscopic physical, mechanical, electrical, and transport properties of materials increasingly requires tight integration of theory, modeling and simulation with precision synthesis, advanced experimental characterization, and device measurements. In this mode, theory and simulation can greatly accelerate the process of materials discovery by providing atomic level understanding of physicochemical phenomena and for making predictions of trends. In particular, this approach can provide understanding, prediction and exploration of new materials and conditions before they are realized in the lab, to illuminate connections between experimental observations, and help identify new materials for targeted synthesis. Toward this end, Density Functional Theory (DFT) can provide a suitable computational framework for investigating the inter- and intramolecular bonding, molecular conformation, charge and spin configurations that are intrinsic to self-assembly of molecules on substrates. This Account highlights recent advances in using an integrated approach based on DFT and scanning probe microscopy [STM(s), AFM] to study/develop electronic materials formed from the self-assembly of molecules into supramolecular or polymeric architectures on substrates. Here it is the interplay between molecular interactions and surface electrons that is used to control the final architecture and subsequent bulk properties of the two-dimensional patterns/assemblies. Indeed a rich variety of functional energy materials become possible.

Sumpter, Bobby G↗

An Experimental Investigation of the Flow of Air in a Flat Broadening Channel

The wide use of diffusers, in various fields of technology, has resulted in several experimental projects to study the action and design of diffusers. Most of the projects dealt with steam (steam turbine nozzles). But diffusers have other applications - that is, ventilators, smoke ducts, air coolers, refrigeration, drying, and so forth. At present there is another application for diffusers in wind-tunnel design. Because of higher requirements and increased power of such installations more attention must be paid to the correctness of work and the decrease in losses due to every section of the tunnel. A diffuser, being one of the component parts of a tunnel , can in the event of faulty construction introduce considerable losses. Therefore, in the design of the new CAHI wind tunnel, it was suggested that an experimental study of diffusers be made, with a view to applying the results to wind tunnels. The experiments conducted by K. K. Baulin in the laboratories of CAHI upon models of diffusers of different cross sections, lengths, and angles of divergence, were a valuable source of experimental data. They were of no help, however, in reaching any conclusion regarding the optimum shape because of the complexity and diversity of the factors which all appeared simultaneously, thereby precluding the.study of the effects of any one factor separately. On the suggestion of the director of the CAHI,Prof. B. N. Ureff, it was decided to experiment on a two-dimensional diffuser model and determine the effect, of the angle of divergence. The author is acquainted with two experimental projects of like nature: the first was conducted with water, the other with air. The first of these works, although containing a wealth of experimental data, does not indicate the nature of flow or its relation to the angle of divergence. The second work is limited to four angles - that is, 12 deg, 24 deg, 45 deg, 90 deg. The study of this diffuser did not supply any information about the effect of smaller angles which, because of their advantages, are more commonly used, The author was able to acquaint himself with the second work only after the experiments were started. For these reasons, as well as because on the basis of those works no conclusion can be reached regarding the nature of flow distribution, of eddies, and so forth, experimental work was continued. The need for determining flow patterns follows from the fact that from them are determined methods of measurement - that is, the determination of velocities by means of the pitot tube, which, as is well known, gives correct indications only when placed with its axis parallel to the axis of flow. The data contained in this report were obtained from experiments conducted by the Aerodynamical Laboratories of the CAHI. The solutions to some. of the mathematical problems connected with the experiments are due to Prof. S. A, Chapligin.

Vedernikoff, A. N.↗

A Multi-Disciplinary Analysis Framework for the Design of Small Launch Vehicles

Between the years of 1995 and 2014 the number of small satellites (1-500 kg) went up from 20 to 180. [1] Out of the 180 launched in 2014 66% were Nano satellites (1-10 kg). [1] With this trend of smaller satellites, one would expect a rise in number of small launch vehicles (SLVs are defined by capability to carry 1-100 kg to orbit), but this has not happened: [3] only 8% of all small satellites are launched on SLVs and the others become secondary payloads on regular launch vehicles. [1] This results in small satellites being placed into either suboptimal orbits or waiting for launch schedules to align with bigger launches, resulting in long waiting times. Dedicated SLVs could improve the responsiveness of small satellite launches, but SLV design is complicated by the large architecture space needed to be explored in order to find efficient and affordable designs. The SLV architecture trade space contains many discrete options, e.g. solid vs. liquid fuels, air launch vs. ground launch, number of stages, etc. [2][3] Performing detailed analysis for all the options at once would be prohibitive. Thus, a sizing environment/framework that is capable of providing necessary information for conceptual-level trade studies and can rapidly explore the vast SLV architecture space is necessary. The framework, illustrated in Figure 1, consists of four disciplines central to the sizing and synthesis of launch vehicles: propulsion, aerodynamics, structures, and trajectory. For the aerodynamics and trajectory disciplines, Missile DATCOM and POST2 are used, respectively. The propulsion and structures disciplines are represented in the framework with tools developed at ASDL Georgia Tech. For propulsion, the Solid Motor Analysis Code (SMAC) is a physics-based conceptual design tool for solid rocket motors. SMAC is capable of geometric burn simulation, ballistic analysis, and prediction of thrust performance. [4] For structures, Launch Vehicle Structural Analysis (LVSA) tool is a physics-based tool that focuses on structural dynamic analysis with sizing capability. These tools are integrated into the framework illustrated in Figure 1 with the corresponding connections described in Table 1. The process flow is as follows: first, SMAC sizes insulation and calculates maximum operating pressures for each vehicle stage. The MEOP and insulation thickness values from SMAC are fed to LVSA which then utilizes this information to size the motor casing. This creates a feedback loop between LVSA and SMAC that converges on the radius available for fuel, casing, and insulation thickness. Once the stage sizing is converged on SMAC creates an engine deck that is passed to POST2. Next, the data from SMAC and LVSA goes into Missile DATCOM which generates an aerodynamics database for POST2. Finally, POST2 performs a targeting optimization while maximizing the payload mass to orbit. Within the framework, POST2 is automated in order to be robust to a wide variety of possible designs by performing a Monte Carlo simulation over the initialization vector of the POST2 optimization variables. To demonstrate the capability of this framework, a sample problem of exploring the design space of an SLV capable of placing satellites into a low Earth orbit (inclination=47 deg, 196.5 by 211.3 nm) is used. This sample problem is a ground-launched SLV consisting of four in-line SRM stages. The multidisciplinary design analysis (MDA) environment is utilized to explore a design space consisting of 22 continuous and 12 discrete variables, shown by Table 1 by blocks 1,2,3. Running a full factorial design of experiments (DOE) would have been prohibitively expensive even with this reduced design space, thus a space filling design with 3,502 and then additional expansion of 2,602 cases was used. The first DOE consisted of 3,502 cases, and all of the variables were varied. These input variables are listed in blocks 1, 2, and 3 in Table 1. Most of the variables are propulsion related with stage lengths determining the delta-V split of the SLV. The expansion consisted of 2,602 cases, and the continuous variables were set to be equal to the most promising designs from the sizing of first DOE. For each set of continuous variables, the discrete variables (grain type, star points, and propellant) were to varied. The results of the DOE can be seen in Figure 2; each of the points in this plot represents a closed launch vehicle that reaches the targeted orbit. For each of the cases, there is information on flown trajectory, structural, and propulsion properties of the SLV. For example, Figure 3 shows changes in altitude and velocity with time for a particular case. The right side of Figure 3 clearly shows the coasting (slow decrease) and burning phases (sharp increase) of the SLV mission. LV mass is positively correlated with the optimized payload mass to orbit because heavier LVs carry more fuel and thus have more stored chemical energy. Furthermore, for any given payload mass to orbit, the most efficient design would result in the smallest LV. The results as visualized in Figure 2 shows this tradeoff, and the Pareto frontier of the efficient designs can be seen along the dotted line. Figure 2 can be divided into regions with the lowest mass vehicles corresponding to the minimum bound on radius, and the highest mass vehicles corresponding to the maximum bound on radius. Within a mass region, the discrete variables, such as propellant type and propellant grain arrangement, have the most effect on payload mass. This paper presents an MDA framework that can perform an automated physics-based sizing of SLV designs and a corresponding methodology to utilize the MDA to explore the design space of SLVs. The proposed methodology was applied to a perform a design space exploration for a four stage SLV. The outputs show the expected pareto frontier forming and provide detailed information about the SLV performance and staging. Using the produced data, it will be possible to select a set of pareto optimal designs that can then be further explored in subsequent design cycles. This demonstration shows that automated design space exploration should be used in the early phase design of future SLV concepts.

Nikita S Birbasov↗

DAISY Benchmark Performance Data

This repository contains the underlying data from benchmark experiments for Drifting Acoustic Instrumentation SYstems (DAISYs) in waves and currents described in "Performance of a Drifting Acoustic Instrumentation SYstem (DAISY) for Characterizing Radiated Noise from Marine Energy Converters" (https://link.springer.com/article/10.1007/s40722-024-00358-6). DAISYs consist of a surface expression connected to a hydrophone recording package by a tether. Both elements are instrumented to provide metadata (e.g., position, orientation, and depth). Information about how to build DAISYs is available at https://www.pmec.us/research-projects/daisy. The repository's primary content is three compressed archives (.zip format), each containing multiple MATLAB binary data files (.mat format). A table relating individual data files to figures in the paper, as well as the structure of each file, is included in the repository as a Word document (Data Description MHK-DR.docx). Most of the files contain time series information for a single DAISY deployment (file naming convention: [site]_DAISY_[Drift #].mat) consisting of processed hydrophone data and associated metadata. For a limited number of DAISY deployments, the hydrophone package was replaced with an acoustic Doppler velocimeter (file naming convention: [site]_DAISY_[Drift #]_ADV.mat). Data were collected over several years at three locations: (1) Sequim Bay at Pacific Northwest National Laboratory's Marine & Coastal Research Laboratory (MCRL) in Sequim, WA, the energetic tidal channel in Admiralty Inlet, WA (Admiralty Inlet), and the U.S. Navy's Wave Energy Test Site (WETS) in Kaneohe, HI. Brief descriptions of data files at each location follow. - MCRL - (1) Drift #4 and #16 contrast the performance of a DAISY and a reference hydrophone (icListen HF Reson), respectively, in the quiescent interior of Sequim Bay (September 2020). (2) Drift #152 and #153 are velocity measurements for a drifting acoustic Doppler velocimeter in in the tidally-energetic entrance channel inside a flow shield and exposed to the flow, respectively (January 2018). (3) Two non-standard files are also included: DAISY_data.mat corresponds to a subset of a DAISY drift over an Adaptable Monitoring Package (AMP) and AMP_data.mat corresponds to approximately co-temporal data for a stationary hydrophone on the AMP (February 2019). - Admiralty Inlet - (1) Drift #1-12 correspond to tests with flow shielded DAISYs, unshielded DAISYs, a reference hydrophone, and drifting acoustic Doppler velocimeter with 5, 10, and 15 m tether lengths between surface expression and hydrophone recording package (July 2022). (2) Drift #13-20 correspond to tests of flow shielded DAISYs with three different tether materials (rubber cord, nylon line, and faired nylon line) in lengths of 5, 10, and 15 m (July 2022). - WETS - (1) Drift #30-32 correspond to tests with a heave plate incorporated into the tether (standard configuration for wave sites), rubber cord only, and rubber cord, but with a flow shielded hydrophone (November 2022). (2) Drift #49-58 and Drift #65-68 correspond to measurements around mooring infrastructure at the 60 m berth where time-delay-of-arrival localization was demonstrated for different DAISY arrangements and hydrophone depths (November 2022).

16 TIDAL AND WAVE POWER↗

Separating Spatial and Temporal Variations of the Aurora Using Two Nearly Colocated Satellites

This final report describes the efforts accomplished during the grant's period of performance, covering the period of 1 May 1997 to 30 April 2001, of a NASA Supporting Research and Technology Program grant under the Ionospheric, Thermospheric, and Mesospheric Physics component of the Sun-Earth Connections program. We have met and exceeded the goals set forth in the proposed research objectives. Referred publications have appeared in the scientific literature and several others are in the review process. In addition, numerous invited and contributed presentations of these studies were presented at national and international meetings during the performance period. One graduate student completed his PhD and won two AGU Best Student Paper awards based on research funded by this grant. These studies are summarized below. The science goal delineated in the initial proposal was "to systematically explore the temporal and spatial characteristics of the aurora in a way heretofore impossible, using data from two coplanar DMSP spacecraft." We accomplished this goal through a series of related studies. One study used these unique data to establish the role of Ps6 waves in coupling between the magnetosphere and the auroral ionosphere (omega bands) during the recovery phase of a magnetic storm; the published paper demonstrated the causal relationships between geospace processes occurring in different regions and established a simple conceptual model based on the fortuitous constellation of observations. In the second string of papers, we used these data to explore velocity-dispersed ions (VDIS) in and near the cusp, to test region identification models, and to look at space/time structure of auroral precipitation. On the first topic, the unique DMSP data revealed a remarkable double VDIS with a latitudinal overlap. This could only be explained in terms of a unified reconnection geometry that builds on several earlier unrelated models. The paper outlining this discovery has drawn considerable attention from the community and is currently in press - it adds significantly to the debate over whether reconnection is study state versus bursty and patchy versus global. The second paper develops the model further by incorporating the electron signature - these ionospheric particle precipitation signatures reveal the presence of magnetospheric "fossilized" FTEs, demonstrating the power of ionospheric measurements as a remote diagnostic of magnetospheric processes. Finally, the general nature of aurora] stability and coherence and region identification by particle characteristics were fully explored in a final paper. We identify candidate mechanisms controlling coherence time scales and length scales and refine boundary region identification criteria. We also use the dual-DMSP observations to identify the open and closed LLBL region and related its significance to the generalized bursty, multiple x-line model developed in the first paper. All of these topics are chapters of Dr. Boudouridis' recently completed PhD thesis.

Spence, Harlan E.↗

Alternative Setup for Long-Duration Low-Duty-Cycle 600°C Ambient Testing of SiC Integrated Circuits

A scalable, compact oven testbed system for simultaneously evaluating a multitude of high temperature integrated circuits (ICs) for prolonged operating times of up to 600 °C has been prototyped. The new testbed system enables long-duration high temperature testing in sufficient statistical quantities consistent with standard aerospace electronics engineering standards. This setup is comprised of multiple compact ovens housing chips or packages mounted to ceramic circuit boards. Each oven is a compact 15.2 cm length by 15.2 cm width by 12.7 cm depth with a maximum 400 Watts of heating power. The custom-made silicon oxide ceramic heating block inside each oven is based on a 3D printed design adapted for the easy insertion of the IC device under test (DUT). This innovative design provides the quick insertion of ICs with or without a ceramic package into a 600 °C environment by utilizing a movable 11.43 cm long ceramic substrate with electrical traces extending from the oven hot zone to external standard plastic-based board connectors. Another key oven design feature is the minimization of the DUT exposure to electromagnetic interference (EMI) by utilizing a filtered DC power source to reduce heating element noise. Additionally, the ovens can be configured in a parallel arrangement allowing global data monitoring over a single industrial RS422 serial port. This feature is important for scaling up to test multiple ICs semi-simultaneously. A USB serial port is provided to independently control the operating parameters of each oven such as the oven target temperature and oven ramp rate. The oven temperature can reach up to 600 °C with a confirmed +/- 4 °C maximum deviation across the test zone region. The ramp rate can be programmed from 1 °C/minute up to 10 °C/minute. Furthermore, a programmable switchboard is used to interface with the DUT. This switchboard comprises a National Instruments Peripheral Component Interconnect eXtension for Instrumentation (NI PXI) system and a breakout board to send and receive power, analog or digital test signals. By using this unique oven testbed system, a variety of ICs can now be tested in parallel using the same test components configured for a diverse set of requirements.

DC Powered Oven↗

Evaluating the potential of short-term instrument deployment to improve distributed wind resource assessment

Distributed wind projects, which are connected at the distribution level of an electricity system or in off-grid applications to serve specific or local energy needs, often rely solely on wind resource models to establish wind speed and energy generation expectations. Historically, anemometer loan programs have provided an affordable avenue for more accurate onsite wind resource assessment, and the lowering cost of lidar systems has shown similar advantages for more recent assessments. While a full 12 months of onsite wind measurement is the standard for correcting model-based long-term wind speed estimates for utility-scale wind farms, the time and capital investment involved in gathering onsite measurements must be reconciled with the energy needs and funding opportunities that drive expedient deployment of distributed wind projects. Much literature exists to quantify the performance of correcting long-term wind speed estimates with 1 or more years of observational data, but few studies explore the impacts of correcting with months-long observational periods. This study aims to answer the question of how short you can go in terms of the observational time period needed to make impactful improvements to model-based long-term wind speed estimates. Three algorithms, multivariable linear regression, adaptive regression splines, and regression trees, are evaluated for their skill at correcting long-term wind resource estimates from the European Centre for Medium-Range Weather Forecasts Reanalysis version 5 (ERA5) using months-long periods of observational data from 66 locations across the US. On average, correction with even 1 month of observations provides significant improvement over the baseline ERA5 wind speed estimates and produces median bias magnitudes and relative errors within 0.22 m s −1 and 4 percentage points of the median bias magnitudes and relative errors achieved using the standard 12 months of data for correction. However, in cases when the shortest observational periods (1 to 2 months) used for correction are not well correlated with the overlapping ERA5 reference, the resultant long-term wind speed errors are worse than those produced using ERA5 without correction. Summer months, which are characterized by weaker relative wind speeds and standard deviations for most of the evaluation sites, tend to produce the worst results for long-term correction using months-long observations. The three tested algorithms perform similarly for long-term wind speed bias; however, regression trees perform notably worse than multivariable linear regression and adaptive regression splines in terms of correlation when using 6 months or less of observational data for correction. Translating the analysis to wind energy, median relative errors in the capacity factor are on average within 10 % using 1 month of training. If the observation period used for correction is not well correlated with the reference data, however, misrepresentation of the observed capacity factor can be substantial. The risk associated with poor correlation between the observed and reference datasets decreases with increasing training period length. In the worst-correlation scenarios, the median capacity factor relative errors from using 1, 3, and 6 months are within 47 %, 26 %, and 16 %, respectively.

17 WIND ENERGY↗

A Geometry Based Infra-Structure for Computational Analysis and Design

The computational steps traditionally taken for most engineering analysis suites (computational fluid dynamics (CFD), structural analysis, heat transfer and etc.) are: (1) Surface Generation -- usually by employing a Computer Assisted Design (CAD) system; (2) Grid Generation -- preparing the volume for the simulation; (3) Flow Solver -- producing the results at the specified operational point; (4) Post-processing Visualization -- interactively attempting to understand the results. For structural analysis, integrated systems can be obtained from a number of commercial vendors. These vendors couple directly to a number of CAD systems and are executed from within the CAD Graphical User Interface (GUI). It should be noted that the structural analysis problem is more tractable than CFD; there are fewer mesh topologies used and the grids are not as fine (this problem space does not have the length scaling issues of fluids). For CFD, these steps have worked well in the past for simple steady-state simulations at the expense of much user interaction. The data was transmitted between phases via files. In most cases, the output from a CAD system could go to Initial Graphics Exchange Specification (IGES) or Standard Exchange Program (STEP) files. The output from Grid Generators and Solvers do not really have standards though there are a couple of file formats that can be used for a subset of the gridding (i.e. PLOT3D data formats). The user would have to patch up the data or translate from one format to another to move to the next step. Sometimes this could take days. Specifically the problems with this procedure are:(1) File based -- Information flows from one step to the next via data files with formats specified for that procedure. File standards, when they exist, are wholly inadequate. For example, geometry from CAD systems (transmitted via IGES files) is defined as disjoint surfaces and curves (as well as masses of other information of no interest for the Grid Generator). This is particularly onerous for modern CAD systems based on solid modeling. The part was a proper solid and in the translation to IGES has lost this important characteristic. STEP is another standard for CAD data that exists and supports the concept of a solid. The problem with STEP is that a solid modeling geometry kernel is required to query and manipulate the data within this type of file. (2) 'Good' Geometry. A bottleneck in getting results from a solver is the construction of proper geometry to be fed to the grid generator. With 'good' geometry a grid can be constructed in tens of minutes (even with a complex configuration) using unstructured techniques. Adroit multi-block methods are not far behind. This means that a million node steady-state solution can be computed on the order of hours (using current high performance computers) starting from this 'good' geometry. Unfortunately, the geometry usually transmitted from the CAD system is not 'good' in the grid generator sense. The grid generator needs smooth closed solid geometry. It can take a week (or more) of interaction with the CAD output (sometimes by hand) before the process can begin. One way Communication. (3) One-way Communication -- All information travels on from one phase to the next. This makes procedures like node adaptation difficult when attempting to add or move nodes that sit on bounding surfaces (when the actual surface data has been lost after the grid generation phase). Until this process can be automated, more complex problems such as multi-disciplinary analysis or using the above procedure for design becomes prohibitive. There is also no way to easily deal with this system in a modular manner. One can only replace the grid generator, for example, if the software reads and writes the same files. Instead of the serial approach to analysis as described above, CAPRI takes a geometry centric approach. This makes the actual geometry (not a discretized version) accessible to all phases of the analysis. The connection to the geometry is made through an Application Programming Interface (API) and NOT a file system. This API isolates the top-level applications (grid generators, solvers and visualization components) from the geometry engine. Also this allows the replacement of one geometry kernel with another, without effecting these top-level applications. For example, if UniGraphics is used as the CAD package then Parasolid (UG's own geometry engine) can be used for all geometric queries so that no solid geometry information is lost in a translation. This is much better than STEP because when the data is queried, the same software is executed as used in the CAD system. Therefore, one analyzes the exact part that is in the CAD system. CAPRI uses the same idea as the commercial structural analysis codes but does not specify control. Software components of the CAD system are used, but the analysis suite, not the CAD operator, specifies the control of the software session. This also means that the license issues (may be) minimized and individuals need not have to know how to operate a CAD system in order to run the suite.

Haimes, Robert↗

Vertical Translation System for the Common Habitat Architecture

The Common Habitat is a large, long-duration habitat that uses an SLS core stage Liquid Oxygen (LOX) tank as its primary structure. Measuring 8.4 meters in diameter and 15 meters in length, it is manufactured as a habitat and launched as such into space. It is intended for use on the Moon as part of a permanently occupied outpost, on Mars as part of an outpost that will be occupied for hundreds of days at a time, and in deep space as part of the Deep Space Exploration Vehicle where it will support crewed missions up to 1200 days in duration. A study of internal orientation and crew size resulted in a Common Habitat configuration sized for a crew of eight with a three-deck horizontal orientation. The Common Habitat Vertical Translation System provides a means for transporting crew and cargo between decks in a Common Habitat spacecraft in gravity levels varying from 0g to 1g. A crowdsourcing campaign was conducted through the GrabCAD platform to initially solicit ideas for restraints and mobility aids, including vertical translation. Four of the five top responses repeated ideas that would be incorporated into features of the Vertical Translation System. The first was a safety barrier (to prevent falls into the opening between decks) that could collapse to form a floor surface covering the opening when not in use. The second idea was a folding ladder that could be stowed in the ceiling when not in use. The third idea was an elevator platform that could traverse the ladder. Several key driving requirements were established for the Vertical Translation System: it may not penetrate into or through the lower deck; it must work on the Earth, Moon, Mars, and in microgravity; it must be easy to operate; it must enable translation of any item that can fit through the Common Habitat’s 40” x 60” hatches, inclusive of suited and unsuited crew with any degree of incapacitation and any equipment or cargo item; and it must include three component systems – deploying floor / safety barriers, a deployable ladder, and an elevator platform. Additional requirements were established for each of the component systems. The safety barriers must form a roughly 40-inch tall, complete wall enclosure on all four sides when deployed; it must include an easy to open gate that allows access to/from the ladder when deployed; and when retracted, the safety barrier must form a smooth, load-bearing floor that can be walked on, and wheeled objects can be rolled across in gravity, without being a trip hazard. The deployable ladder must be composed of multiple ladders that work together; it must stow in the ceiling when not in use; and it must not penetrate into the 40” x 60” vertical passage corridor. The elevator platform must work with the deployable ladder system; it must be able to bridge any gap in ladders between decks; it must stop at each deck flush with the deck surface; it must be capable of transporting an incapacitated crew member as a single rescuer operation; it must be capable of transporting a full-size subsystems pallet; it must function as an elevator for a crew member carrying large objects; it must have safety functions to prevent falls from the platform, or crew/cargo collisions with edges of hatch openings, or entanglement with ladder rungs/structure; it must stow when not in use; and it must autonomously both connect itself to the ladder and deploy itself to any deck where needed when called (e.g., a crew member on any deck can call for the platform and it must connect itself to the ladders without assistance and translate to the requestor’s deck). These requirements were developed into a system concept with the assistance of a NASA Pathways Intern who also added the requirement to size the design based on the use of commercial components, using existing motors and other mechanisms to ensure that the resulting system could be inexpensively produced. The Floor and Safety Barrier consists of four panels, two roughly 40 inches long and two roughly 60 inches long that can fold into the floor on top of each other when not in use. The uppermost panel is load bearing and acts as the floor surface. When deployed, they connect with each other to form a rigid barrier surrounding the vertical passageway. One of the panels contains a hinged gate that can be opened when deployed to allow for access to/from the passageway. The Deploying Ladder consists of two ladder segments, one mounted on the ceiling of the lower deck and the other mounted on the ceiling of the mid deck. A rotating mechanism is mounted on the ladder to allow it to rotate into a horizontal position against the ceiling for stowage, or down to a vertical position for use. A second rotating mechanism is built into the ladder, allowing the rungs to rotate. A toothed surface intended to work with the elevator platform covers the front of the ladder rails and the top and bottom of the rails are designed to be flush when aligned with another ladder segment. The elevator platform is essentially a motorized, self-propelled deck. It has a mechanism that holds it in contact with the ladder rails and drives itself against the toothed surface. This mechanism allows the elevator platform to ascend or descend the ladder. In order to stow the platform when not in use, a set of short ladder rails (without rungs) are mounted to the ceiling of the mid deck. When the mid deck ladder is stowed, it is flush with these rails and the platform can drive itself onto those short rails for stowage. An additional mechanism on the platform can pitch its deck surface 90 degrees, such that when the ladder is to be stowed, the platform can fold up against the ceiling. As a consequence of the ladder and elevator platform design, the opening between decks in the Common Habitat was enlarged to ensure that the elevator platform can accept a payload up to 40”x60” in dimension.

Human Centered Design↗