Search NASA⌕ Search

SEARCH · Search NASA

Results for “Continuous”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Integration of fixed-frequency and FM-CW (frequency-modulated continuous-wave) reflectometers for coincident turbulence measurements on LTX- β (Lithium Tokamak eXperiment- β )

The fixed-frequency and frequency-modulated continuous-wave (FM-CW) reflectometers on LTX-β (Lithium Tokamak eXperiment-β) have been configured to use the same transmission lines and antenna arrays for coincident views of the core and edge plasma. The fixed-frequency channels (13.1–20.5 and 20–40 GHz, tunable between discharges) provide time-resolved measurements of density fluctuations, while the FM-CW channels (13.1–20.2 and 19.5–33.5 GHz) measure the density profile and fluctuations, with high spatial resolution and a sampling rate determined by the frequency sweep interval (5 μs). Data from both reflectometers are synchronously acquired to simultaneously leverage the wide bandwidth and high spatial resolution of the respective systems. Experiments showed that mutual crosstalk interference is momentary and does not diminish the capability of either system. Spectral analysis indicated broad power spectra (several hundreds of kHz) and suggests that the signals from the FM-CW system are consistent with under-sampled fixed-frequency signals. Radial correlations were explored using data from the two reflectometers, as well as from the FM-CW system alone. The core channels showed high levels of agreement between these two comparisons, suggesting that the data from the reflectometers are interchangeable for statistical estimates. For the edge channels, comparisons using data from the FM-CW reflectometer alone showed significant decorrelation due to time lag caused by the finite frequency up-sweep duration. Alternatively, this effect is eliminated when cross-correlating data from the different reflectometers. Finally, these results highlight the advantages of operating the fixed-frequency and FM-CW reflectometers in this manner, where the combined system can overcome the limitations of each separate system.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A Jacobian-free pseudo-arclength continuation method for phase transitions in inhomogeneous thermodynamic systems

Developing phase diagrams for inhomogeneous systems in thermodynamics is difficult, in part, due to the large phase space and the possibility of unstable and metastable solutions arising from first-order phase transitions. Pseudo-arclength continuation (PAC) is a method that allows one to trace out stable and unstable solutions of nonlinear systems. Typically, PAC utilizes the Jacobian in order to implement Newton (or quasi-Newton) steps. In this work, we present a Jacobian-free PAC method that is amenable to the usual workflows in inhomogeneous thermodynamics. We demonstrate our method in systems that have first-order phase transitions, including a novel example of polyelectrolyte complex coacervation in confinement, where multiple surface phase transitions occur and can overlap with one another.

Chemistry↗

Continuous-wave Cr{sup 2+}:CdS laser

Continuous-wave lasing is obtained for the first time in a Cr{sup 2+}:CdS crystal pumped by a thulium fibre laser at 1908 nm. The output power of the laser at 2534 nm achieved 0.81 W with the slope efficiency with respect to the absorbed pump power equal to 52.3%. The parameters of Cr{sup 2+}:CdS and Cr{sup 2+}:CdSe lasers are compared. A Cr{sup 2+}:CdSe crystal generated 1.7 W of cw radiation at 2638 nm with the slope efficiency with respect to the absorbed power equal to 53.4%. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Pulsed Fe{sup 2+}:ZnS laser continuously tunable in the wavelength range of 3.49 - 4.65 {mu}m

A laser based on a Fe{sup 2+}:ZnS crystal is demonstrated for the first time. Lasing in this crystal is obtained at room temperature under pumping by 40-ns pulses of an Er:YAG laser at a wavelength of 2.94 nm. The slope efficiency of the Fe{sup 2+}:ZnS laser with respect to the absorbed pump energy was 32%, and the output energy reached 3.4 mJ. Continuous tuning of the laser wavelength within the range of 3.49 - 4.65 nm was achieved using an intracavity dispersion prism. (lasers)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Continuous-wave parametric oscillation in polarisation-maintaining optical fibre

Continuous-wave parametric oscillation in a polarisation-maintaining optical fibre has been achieved for the first time using polarisation phase matching. Up-conversion with a frequency shift of {approx}8.6 THz has been demonstrated experimentally. The single-pass optical power generated at 1017 nm in a 85-m-long Nufern PM980-XP fibre exceeded 40 mW. The conversion efficiency was 3.3%, which is an order of magnitude higher than that reported previously for cw parametric up-conversion in the 1-{mu}m spectral region. We compare theoretical predictions with experimental data and analyse factors that may influence output power saturation with increasing signal and pump powers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spectroscopy and tunable continuous-wave operation of Cr{sup 2+}:Zn{sub 1-x}Mg{sub x}Se single crystal around 2.5 μm

Hexagonal single crystals of the Cr{sup 2+}:Zn{sub 1-x}Mg{sub x}Se solid solution are grown by the Bridgman – Stockbarger technique. We study their optical and photoluminescent characteristics and determine the temperature dependences of the photoluminescence kinetics within the range 5 – 440 K. The crystals possess a broad gain band in the range from 2 to 3.5 μm and exhibit a weak quenching of luminescence with a quantum yield exceeding 80% at room temperature. Tunable continuous-wave oscillation is demonstrated in the region of 2.5 μm. (lasers)

36 MATERIALS SCIENCE↗

Semiconductor lasers with a continuous tuning range above 100 nm in the nearest IR spectral region

We have developed two new types of lasers based on quantum-confined semiconductor optical amplifiers with an acousto-optic tunable filter in an external fibre ring cavity. The lasers offer continuous wavelength tuning ranges from 780 to 885 and from 880 to 1010 nm, 20 mW of cw output power, and a tuning rate up to 10{sup 4} nm s{sup -1} at an instantaneous spectral linewidth less than 0.1 nm. (lasers)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Continuous-wave and actively Q-switched resonantly dual-end-pumped Er : YAG ceramic laser emitting at 1.6 μm

We demonstrate a continuous-wave (cw) and actively Q-switched Er : YAG ceramic laser resonantly dual-end-pumped by a 1532 nm fibre-coupled laser diode. A maximum cw output power of 1.48 W at 1645.3 nm is obtained at an absorbed pump power of 12.72 W, corresponding to a slope efficiency of 19.2%. In the Q-switched regime the maximum pulse energy of 0.84 mJ is reached at a pulse repetition rate of 100 Hz, pulse duration of 48.03 ns and absorbed pump power of 10.51 W. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Generation of solitary waves from continuous radiation in a nonlinear oppositely directed coupler

We consider a nonlinear coupler formed by two tunnelcoupled waveguides, one waveguide being made of a conventional dielectric and the other – of a negative-index material. The possibility of the formation of solitary waves from continuous radiation having a constant intensity is shown provided that the radiation is coupled into the input of a negative-index coupler channel (on the back side of the waveguide system). With increasing intensity of the input light, the speed and amplitude of the generated solitary waves increase and the period of their formation is reduced. (nonlinear optical phenomena)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Bismuth-doped fibre laser continuously tunable within the range from 1.36 to 1.51 μm

A single-mode bismuth-doped fibre laser continuously tunable within the wavelength range from 1366 to 1507 nm with the help of an external diffraction grating has been developed. Such a wide wavelength tuning range is achieved by inserting a long-period fibre grating in the laser cavity. The grating smoothes the gain spectrum and thus ensures stable lasing at the edges of the above-mentioned spectral range. The output laser power varies from 25 mW at the tuning range edges to 50 mW in the centre upon pumping at 1.34 μm with a power of 300 mW. (paper)

42 ENGINEERING↗

Combined optical parametric oscillator with continuous tuning of radiation wavelength in the spectral range 2.5–10.8 μm

A combined optical parametric oscillator (OPO) with continuous tuning of the radiation wavelength in the spectral range 2.5–10.8 μm, optically pumped with the radiation from a Q -switched Nd : YLF laser (1.053 μm), is developed and tested. The oscillation is provided by an OPO1 based on a MgO : PPLN ‘fan-out’ structure in the spectral region 2.5–4.5 μm and by an OPO2 based on HgGa{sub 2}S{sub 4} nonlinear crystals in the spectral region 4.18–10.8 μm, respectively. The angles of phase matching are measured for the HgGa{sub 2}S{sub 4} crystals in the spectral range 4.18–10.8 μm for the type II conversion (eo-e), which virtually coincide with the calculated ones. The experimental absorption spectra of a gas mixture in the range 2.5–10.8 μm obtained using a gas-filled sealed-off photoacoustic cell are presented. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Continuous-wave bismuth fibre laser tunable from 1.65 to 1.8 μm

A single-mode fibre based on bismuth-doped germanosilicate glass with a high germanium concentration is considered as an active medium of a laser continuously tunable within the range 1.65 – 1.8 μm. The laser scheme included a broadband ring cavity, and the laser wavelength was controlled by an external plane diffraction grating in the Littrow configuration. For a pump power of 300 mW at a wavelength of 1.564 μm, the maximum output laser power was 15 mW in the zero diffraction order and 6 mW at the fibre output. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Continuous-wave 80-W lasing in Yb : YAG ceramics

We report on continuous-wave lasing at a wavelength of 1030 nm with a maximum power of 80 W and a slope efficiency of 26% in a thin disk element made of domestic ytterbium-doped yttrium – aluminium – garnet ceramics [(Yb{sub 0.05}Y{sub 0.95}){sub 3}Al{sub 5}O{sub 12}]. The studied ceramic sample was fabricated by solid-phase sintering of a mixture of (Yb{sub 0.05}Y{sub 0.95}){sub 2}O{sub 3} and Al{sub 2}O{sub 3} nanopowders synthesised by laser ablation. The measured laser characteristics in cw and repetitively pulsed regimes are presented. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Efficiency of using nitrogen trifluoride as an oxidiser in a supersonic continuous-wave chemical HF laser

We report the results of an experimental study of possible ways to increase the efficiency of using NF{sub 3} nitrogen trifluoride as an oxidiser in an atomic fluorine generator of a supersonic continuous-wave chemical HF laser with a flat nozzle block corresponding to the nozzle – nozzle reagent mixing scheme. As such ways, we consider increasing the residence time of reagents in the combustion chamber and rising temperature in the chemical reaction zone. Comparison of specific energy characteristics of an HF laser operating with the use of the studied (NF{sub 3}) and ‘basic’ (F{sub 2}) oxidisers shows that the replacement of molecular fluorine with nitrogen trifluoride during the burning with deuterium in the combustion chamber of an atomic fluorine generator with allowance for the proposed measures leads to a reduction in the specific laser energy output by no more than 23 % – 24 % at high burning completeness. (paper)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation of the process of mixing reagents in the laser chamber of active medium generators of continuous-wave chemical lasers with promising nozzle arrays

It is shown that the use of a toothed nozzle array in the active medium generator (AMG) of continuous-wave chemical lasers (CWCLs) allows more efficient mixing of reagents to be achieved in the laser chamber than in an AMG with a slit nozzle array. The results of calculations of parameters of the active medium of a DF CWCL operating in the gain regime for the AMG with traditional and promising nozzle array designs are presented. A kinetic model of processes in the DF CWCL active medium is proposed, which allows obtaining a good agreement with the results of measurements of the small-signal gain. (paper)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Martingale ergodic and ergodic martingale processes with continuous time

In a paper dedicated to unifying martingales and ergodic averages, Kachurovskii introduced certain unifying discrete-time martingale ergodic and ergodic martingale processes, for which he proved convergence theorems and established maximal and dominant inequalities. Our purpose in this article is to obtain similar results for such processes with continuous time. In addition, the results are used to assert convergence of yet another unifying process relating to Rota's approach to unification of martingales and Abel ergodic averages. Bibliography: 13 titles.

97 MATHEMATICS AND COMPUTING↗

Time, space and equilibrium means of continuous vector functions on the phase space of a dynamical system

For a dynamical system {tau} with 'time' Z{sup d} and compact phase space X, we introduce three subsets of the space R{sup m} related to a continuous function f:X{yields}R{sup m}: the set of time means of f and two sets of space means of f, namely those corresponding to all {tau}-invariant probability measures and those corresponding to some equilibrium measures on X. The main results concern topological properties of these sets of means and their mutual position. Bibliography: 18 titles.

97 MATHEMATICS AND COMPUTING↗

On the rate of convergence in von Neumann's ergodic theorem with continuous time

The rate of convergence in von Neumann's mean ergodic theorem is studied for continuous time. The condition that the rate of convergence of the ergodic averages be of power-law type is shown to be equivalent to requiring that the spectral measure of the corresponding dynamical system have a power-type singularity at 0. This forces the estimates for the convergence rate in the above ergodic theorem to be necessarily spectral. All the results obtained have obvious exact analogues for wide-sense stationary processes. Bibliography: 7 titles.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗