Search NASA⌕ Search

SEARCH · Search NASA

Results for “Core Analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Small Sample Reactivity Measurements in the RRR/SEG Facility: Reanalysis using TRIPOLI-4

This work involved reanalyzing the RRR/SEG integral experiments performed at the Rossendorf facility in Germany throughout the 1970s and 80s. These small sample reactivity worth measurements were carried out using the pile oscillator technique for many different fission products, structural materials, and standards. The coupled fast-thermal system was designed such that the measurements would provide insight into elemental data, specifically the competing effects between neutron capture and scatter. Comparing the measured to calculated reactivity values can then provide adjustment criteria to ultimately improve nuclear data for fast reactor designs. Due to the extremely small reactivity effects measured (typically less than 1 pcm) and the specific heterogeneity of the core, the tool chosen for this analysis was TRIPOLI-4. This code allows for high fidelity 3-dimensional geometric modeling, and the most recent, unreleased version, is capable of exact perturbation theory.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Cr-coated Accident Tolerant Fuel Concept Source Term Accident Sequence Analysis - High Burnup Fuel Source Term Accident Sequence Analysis Supplement

To extend NUREG-1465 and high burnup fuel source term (SAND2023-01313) recommendations, representative radiological releases to containment – patterned after NUREG-1465 – have been evaluated for LWRs utilizing the chromium-coating on major zircaloy structures (cladding and fuel canisters) and high burnup fuel with enrichments of 8% and 10% for PWRs and BWRs, respectively. Representative radionuclide releases are generated for this accident tolerant fuel concept by applying non-parametric bootstrap methods to MELCOR simulation results. Accident scenarios considered in this analysis include principle contributors to historical core damage frequency estimates for a range of nuclear reactor technologies representative of the operating U.S.A. fleet of nuclear reactors.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

High-Speed Layup and Forming of Automotive Composite Components

This Project is focused on the design and manufacture of automotive components that meet functional and environmental requirements of an existing automotive application at a cost of ≤ $\$$11.00 per kilogram weight reduction. This project fosters the development of composite material technologies suitable for high volume automotive processes and run rates as well as industry workforce development with these technologies. Current automotive manufacturing involves utilizing steel or aluminum in sheet form which is rapidly stamped into components at rates up to 3600 per hour. The metallic sheets are available in many different thicknesses, strength levels, and manufacturing rates are reasonable independent of part size. While composite materials are available for use in automotive applications, the material cost, labor to manufacture and the processing of the waste far exceed the cost compared to metallic designs. Typical composite layer by layer layup procedures don’t meet the desired 60 second layup time that current automotive processes require and are also restricted by part size. Due to these factors, composites have not yet made advances into today’s high volume automotive applications. Industry partners DURA, BASF, Ford, and IACMI core innovation partner MSU collaborated to develop a manufacturing process technology that is capable of manufacturing composite blanks at high volume and independent of part size. IACMI core innovation partner Purdue provided FEA analysis and cost modelling. The objective of this project was to demonstrate a composite sheet layup and consolidation process that can be commercialized for high volume requirements, identify potential layup equipment suppliers, and develop a process of 60 second layup, forming, and trimming of a continuous fiber automotive component for the mainstream market.

42 ENGINEERING↗

MEASUREMENT OF SPECIFIC HEAT CAPACITY OF SALTSTONE

One of the goals of the Saltstone variability study is to identify (and quantify the impact of) the operational and compositional variables that control or influence the important processing and performance properties of Saltstone grout mixtures. The heat capacity of the Saltstone waste form is one of the important properties of Saltstone mixes that was last measured at SRNL in 1997. It is therefore important to develop a core competency for rapid and accurate analysis of the specific heat capacity of the Saltstone mixes in order to quantify the impact of compositional and operational variations on this property as part of the variability study. The heat capacity, coupled with the heat of hydration data obtained from isothermal calorimetry for a given Saltstone mix, can be used to predict the maximum temperature increase in the cells within the vaults of the Saltstone Disposal Facility (SDF). The temperature increase controls the processing rate and the pour schedule. The maximum temperature is also important to the performance properties of the Saltstone. For example, in mass pours of concrete or grout of which Saltstone is an example, the maximum temperature increase and the maximum temperature difference (between the surface and the hottest location) are controlled to ensure durability of the product and prevent or limit the cracking caused by the thermal gradients produced during curing. This report details the development and implementation of a method for the measurement of the heat capacities of Saltstone mixes as well as the heat capacities of the cementitious materials of the premix and the simulated salt solutions used to batch the mixes. The developed method utilizes the TAM Air isothermal calorimeter and takes advantage of the sophisticated heat flow measurement capabilities of the instrument. Standards and reference materials were identified and used to validate the procedure and ensure accuracy of testing. Heat capacities of Saltstone mixes were {approx} 55% higher than the previous measurement of specific heat capacity on a reference Saltstone mix in 1997. Values of mixes prepared using Deliquification, Dissolution and Adjustment (DDA), Modular Caustic Side Solvent Extraction Unit (MCU) and Salt Waste Processing Facility (SWPF) simulants and premix at 0.60 w/cm ratio were {approx} 1.95 J/g/{sup o}C and were equivalent within experimental error. The simple law of mixtures was used to predict the heat capacities of the Saltstone and the results were in excellent agreement with experimental data. This simple law of mixtures can therefore be used to predict the heat capacities of Saltstone mixes in those cases where measurements have not been made. The time dependence of the heat capacity is important as an input to the modeling of temperature increase in Saltstone vaults. The heat capacity of a mix of MCU and premix at 0.60 w/cm ratio was measured immediately after initial mixing and then periodically up to times greater than 100 days. Within experimental error, the heat capacity did not change with time. Therefore, the modeling is not complicated by requiring a time dependent function for specific heat capacity. The water to cementitious material (w/cm) ratio plays a key role in determining the value of the heat capacity. Both experimental and predictive values for SWPF mixes as function of the w/cm ratio were obtained and presented in this report. Predictions of the maximum temperatures of the Saltstone mixes were made using the heat of hydration data from previous isothermal measurements and the newly measured heat capacities for DDA, MCU and SWPF mixes. The maximum temperature increase ranged from 37 to 48 C for these mixes. The presence of aluminate at 0.33 M produced a temperature increase of 68 C which is close to the adiabatic temperature rise of 74 C observed by Steimke and Fowler in 1997 for a mix containing 0.35 M aluminate. Aluminum dissolution of the sludge will increase the aluminate in the DSS which in turn will result in a larger temperature increase in the Saltstone vaults during the curing period. The initial temperature of the Saltstone mixes in the Saltstone Production Facility (SPF) can be predicted using the specific heat capacities of Decontaminated Salt Solutions (DSS), the specific heat capacities of cementitious materials, and the initial temperatures of the DSS and the premix. This initial mix temperature is dominated by the DSS temperature due to its high heat capacity relative to the cementitious materials. Therefore, controlling the initial temperature of the DSS to lower temperatures will lead to lower maximum temperatures in the vault for a given batch of Saltstone.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Preliminary Assessment of ATR-C Capabilities to Provide Integral Benchmark Data for Key Structural/Matrix Materials that May be Used for Nuclear Data Testing and Analytical Methods Validation

The purpose of this research is to provide a fundamental computational investigation into the possible integration of experimental activities with the Advanced Test Reactor Critical (ATR-C) facility with the development of benchmark experiments. Criticality benchmarks performed in the ATR-C could provide integral data for key matrix and structural materials used in nuclear systems. Results would then be utilized in the improvement of nuclear data libraries and as a means for analytical methods validation. It is proposed that experiments consisting of well-characterized quantities of materials be placed in the Northwest flux trap position of the ATR-C. The reactivity worth of the material could be determined and computationally analyzed through comprehensive benchmark activities including uncertainty analyses. Experiments were modeled in the available benchmark model of the ATR using MCNP5 with the ENDF/B-VII.0 cross section library. A single bar (9.5 cm long, 0.5 cm wide, and 121.92 cm high) of each material could provide sufficient reactivity difference in the core geometry for computational modeling and analysis. However, to provide increased opportunity for the validation of computational models, additional bars of material placed in the flux trap would increase the effective reactivity up to a limit of 1$ insertion. For simplicity in assembly manufacture, approximately four bars of material could provide a means for additional experimental benchmark configurations, except in the case of strong neutron absorbers and many materials providing positive reactivity. Future tasks include the cost analysis and development of the experimental assemblies, including means for the characterization of the neutron flux and spectral indices. Oscillation techniques may also serve to provide additional means for experimentation and validation of computational methods and acquisition of integral data for improving neutron cross sections. Further assessment of oscillation techniques for implementation in the ATR-C may be of additional benefit. The establishment of benchmark experiment capabilities in the ATR-C would allow for the further development of techniques and facility enhancements involving neutronics experimentation in the ATR-C.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Preliminary Assessment of ATR-C Capabilities to Provide Integral Benchmark Data for Key Structural/Matrix Materials that May be Used for Nuclear Data Testing and Analytical Methods Validation

The purpose of this document is to identify some suggested types of experiments that can be performed in the Advanced Test Reactor Critical (ATR-C) facility. A fundamental computational investigation is provided to demonstrate possible integration of experimental activities in the ATR-C with the development of benchmark experiments. Criticality benchmarks performed in the ATR-C could provide integral data for key matrix and structural materials used in nuclear systems. Results would then be utilized in the improvement of nuclear data libraries and as a means for analytical methods validation. It is proposed that experiments consisting of well-characterized quantities of materials be placed in the Northwest flux trap position of the ATR-C. The reactivity worth of the material could be determined and computationally analyzed through comprehensive benchmark activities including uncertainty analyses. Experiments were modeled in the available benchmark model of the ATR using MCNP5 with the ENDF/B-VII.0 cross section library. A single bar (9.5 cm long, 0.5 cm wide, and 121.92 cm high) of each material could provide sufficient reactivity difference in the core geometry for computational modeling and analysis. However, to provide increased opportunity for the validation of computational models, additional bars of material placed in the flux trap would increase the effective reactivity up to a limit of 1$ insertion. For simplicity in assembly manufacture, approximately four bars of material could provide a means for additional experimental benchmark configurations, except in the case of strong neutron absorbers and many materials providing positive reactivity. Future tasks include the cost analysis and development of the experimental assemblies, including means for the characterization of the neutron flux and spectral indices. Oscillation techniques may also serve to provide additional means for experimentation and validation of computational methods and acquisition of integral data for improving neutron cross sections. Further assessment of oscillation techniques for implementation in the ATR-C may be of additional benefit. The establishment of benchmark experiment capabilities in the ATR-C would allow for the further development of techniques and facility enhancements involving neutronics experimentation in the ATR-C.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Development of Mechanistic Modeling Capabilities for Local Neutronically-Coupled Flow-Induced Instabilities in Advanced Water-Cooled Reactors

The major research objectives of this project included the formulation of flow and heat transfer modeling framework for the analysis of flow-induced instabilities in advanced light water nuclear reactors such as boiling water reactors. General multifield model of two-phase flow, including the necessary closure laws. Development of neurton kinetics models compatible with the proposed models of heated channel dynamics. Formulation and encoding of complete coupled neutronics/thermal-hydraulics models for the analysis of spatially-dependent local core instabilities. Computer simulations aimed at testing and validating the new models of reactor dynamics.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Advanced Simulation and Optimization Tools for Dynamic Aperture of Non-scaling FFAGs and Accelerators including Modern User Interfaces

With the U.S. experimental effort in HEP largely located at laboratories supporting the operations of large, highly specialized accelerators, colliding beam facilities, and detector facilities, the understanding and prediction of high energy particle accelerators becomes critical to the success, overall, of the DOE HEP program. One area in which small businesses can contribute to the ongoing success of the U.S. program in HEP is through innovations in computer techniques and sophistication in the modeling of high-energy accelerators. Accelerator modeling at these facilities is performed by experts with the product generally highly specific and representative only of in-house accelerators or special-interest accelerator problems. Development of new types of accelerators like FFAGs with their wide choices of parameter modifications, complicated fields, and the simultaneous need to efficiently handle very large emittance beams requires the availability of new simulation environments to assure predictability in operation. In this, ease of use and interfaces are critical to realizing a successful model, or optimization of a new design or working parameters of machines. In Phase I, various core modules for the design and analysis of FFAGs were developed and Graphical User Interfaces (GUI) have been investigated instead of the more general yet less easily manageable console-type output COSY provides.

43 PARTICLE ACCELERATORS↗

A proton-cyclotron wave storm generated by unstable proton distribution functions in the solar wind

We use audification of 0.092 s cadence magnetometer data from the Wind spacecraft to identify waves with amplitudes >0.1 nT near the ion gyrofrequency (∼0.1 Hz) with duration longer than 1 hr during 2008. We present one of the most common types of event for a case study and find it to be a proton-cyclotron wave storm, coinciding with highly radial magnetic field and a suprathermal proton beam close in density to the core distribution itself. Using linear Vlasov analysis, we conclude that the long-duration, large-amplitude waves are generated by the instability of the proton distribution function. The origin of the beam is unknown, but the radial field period is found in the trailing edge of a fast solar wind stream and resembles other events thought to be caused by magnetic field footpoint motion or interchange reconnection between coronal holes and closed field lines in the corona.

79 ASTRONOMY AND ASTROPHYSICS↗

The First ALMA Observation of a Solar Plasmoid Ejection from an X-Ray Bright Point

Eruptive phenomena such as plasmoid ejections or jets are important features of solar activity and have the potential to improve our understanding of the dynamics of the solar atmosphere. Such ejections are often thought to be signatures of the outflows expected in regions of fast magnetic reconnection. The 304 Å EUV line of helium, formed at around 10{sup 5} K, is found to be a reliable tracer of such phenomena, but the determination of physical parameters from such observations is not straightforward. We have observed a plasmoid ejection from an X-ray bright point simultaneously at millimeter wavelengths with ALMA, at EUV wavelengths with SDO /AIA, and in soft X-rays with Hinode /XRT. This paper reports the physical parameters of the plasmoid obtained by combining the radio, EUV, and X-ray data. As a result, we conclude that the plasmoid can consist either of (approximately) isothermal ∼10{sup 5} K plasma that is optically thin at 100 GHz, or a ∼10{sup 4} K core with a hot envelope. The analysis demonstrates the value of the additional temperature and density constraints that ALMA provides, and future science observations with ALMA will be able to match the spatial resolution of space-borne and other high-resolution telescopes.

79 ASTRONOMY AND ASTROPHYSICS↗

Acoustically treated ground test nacelle for the General Electric TF34 turbofan

A description is given of the ground test quiet nacelle for the TF34 engine. The suppression treatment consists of cylindrical splitters in the inlet and fan exhaust ducts plus duct wall treatment and core exhaust wall treatment. Aerodynamic design analysis of the inlet and exhaust ducts and overall engine performance with pressure losses from the acoustic treatment is included. The objectives of the test program are to obtain noise data for a heavily suppressed high bypass turbofan with various arrangements of exhaust systems and acoustic treatment, and to provide a basis for the power plants of the Quiet Experimental STOL Aircraft (Questol).

Edkins, D. P.↗

Ancient solar wind in lunar microbreccias

Possible components of the ancient solar wind, particularly the N-15/N-14 ratio, are investigated on the basis of lunar microbreccia studies. Nitrogen contents and isotope ratios were determined for Apollo 11 and 15 microbreccia samples by means of vacuum pyrolysis techniques. The Apollo 11 soil breccias, which had been closed to the addition of recent solar wind due to their compaction, are found to contain the lowest N-15/N-14 ratios yet reported for the solar wind, extending the range of variation of the ratio to between a delta N-15 of -190% in the past to +120% at present. Nitrogen isotope analysis of the Apollo 15 drill core, which had undergone two episodes of solar wind exposure, also support the secular variation in the N-15 content of the solar wind, which is attributed to spallation reactions in the sun. The formation of the breccias at the Apollo 11 and 15 sites is discussed on the basis of the observed nitrogen systematics, and differences between N-15 and Ne-21 cosmic ray exposure ages implied are attributed to the diffusive loss of neon from lunar soils.

Thiemens, M. H.↗

The application of encapsulation material stability data to photovoltaic module life assessment

For any piece of hardware that degrades when subject to environmental and application stresses, the route or sequence that describes the degradation process may be summarized in terms of six key words: LOADS, RESPONSE, CHANGE, DAMAGE, FAILURE, and PENALTY. Applied to photovoltaic modules, these six factors form the core outline of an expanded failure analysis matrix for unifying and integrating relevant material degradation data and analyses. An important feature of this approach is the deliberate differentiation between factors such as CHANGE, DAMAGE, and FAILURE. The application of this outline to materials degradation research facilitates the distinction between quantifying material property changes and quantifying module damage or power loss with their economic consequences. The approach recommended for relating material stability data to photovoltaic module life is to use the degree of DAMAGE to (1) optical coupling, (2) encapsulant package integrity, (3) PV circuit integrity or (4) electrical isolation as the quantitative criterion for assessing module potential service life rather than simply using module power loss.

Coulbert, C. D.↗

Atmospheric methane in the recent and ancient atmospheres Concentrations, trends, and interhemispheric gradient

Rasmussen and Khalil (1981) have shown that the concentration of methane is increasing in the earth's atmosphere. A continuing increase of methane may perturb the global environment in the future by warming the earth and leading to more ozone and carbon monoxide in the atmosphere. It appears that the present concentration of methane may be more than twice as high as the natural levels of 150 years ago. An analysis of air bubbles buried long ago in polar ice makes it possible to deduce the concentrations of methane in the old and ancient atmospheres. The present investigation is concerned with the results of an analysis of more than 80 ice core samples, taking into account both polar regions of the earth. The samples range in age from about 100 to nearly 3000 years old. It is found that the concentration of methane started changing significantly about 150 years ago. These findings suggest that the increase of methane is probably indirectly caused by the rapid increase of human population.

Rasmussen, R. A.↗

Samples at the Apollo 15 landing site: Types and distribution

Samples, consisting of more than 350 individually numbered samples of rock and regolith, were collected during the three EVAs on the Apollo 15 mission. Samples consisted of rock specimens, and scooped, trenched, and cored regolith samples. Petrographic and chemical analysis are discussed.

Ryder, G.↗

Motion and decay of vortex rings submerged in a rotational flow

The interaction between vortex rings of finite strength and an axisymmetric rotational background flow is studied by a singular perturbation method, because it is difficult to use a finite-difference method to analyze the viscous decay in the small core of a vortex ring. The analysis is carried out by combining a composite solution of a vortex ring and an unsteady Euler solution for the background rotational flow. Using the method of averaging, a numerical scheme is developed to obtain an Euler solution in which the grid and time-step sizes depend solely on the length and velocity scales of the background flow. Numerical results are presented to illustrate the interaction between the trajectories and decay rates of the vortex rings and the background rotational flow.

Ishii, K.↗

Telerobotics for the efficient utilization of space

Telerobotics is a new technology that is being developed to perform remote manipulation in space. It seeks to accommodate the needs arising from a rapidly increasing investment in space assets and from the large costs deriving from human operations in space, especially EVA. Telerobotics applies advanced automation and artificial intelligence technology and combines the immediacy of execution of teleoperation (the replication at a distance of the physical motions of the operator) with the efficiency and precision of supervised robotic autonomy (the accomplishment of assignments through machine task decomposition and interpretation of sensor information). One of the key goals of this approach is the achievement of a seamless transition between teleoperation and supervised autonomy. The basis of this technology and of the NASA telerobotics research and development activities are described. They consist of five elements: core research, laboratory integration testbed, mission analysis, application demonstrations and flight experiments. Current advances, both in research and system integration are reported including the first integration of the laboratory testbed and quantitative comparisons obtained in a buoyant facility. Planned future goals are outlined.

Varsi, Giulio↗