Search NASA⌕ Search

SEARCH · Search NASA

Results for “DFT calculation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Shape-Controlled CO 2 Electrochemical Reduction on Nanosized Pd Hydride Cubes and Octahedra

Electrochemical CO 2 reduction reaction (CO 2 RR) provides a potential pathway to mitigate challenges related to CO 2 emissions. Pd nanoparticles have shown interesting properties as CO 2 RR electrocatalysts, while how different facets of Pd affect its performance in CO 2 reduction to synthesis gas with controlled H 2 to CO ratios has not been studied. Herein, we synthesized nano-sized Pd cubes and octahedra particles dominated by Pd(100) and Pd(111) facets, respectively. Here, the Pd octahedra particles show higher CO selectivity (up to 95%) and better activity than Pd cubes and commercial particles. For both Pd octahedra and cubes, the ratio of H 2 /CO products was tunable between 1 and 2, a desirable ratio for methanol production and the Fischer-Tropsch processes. Further studies of Pd octahedra in a 25-cm 2 flow cell showed a total CO current of 5.47 A was achieved at a potential of 3.4 V, corresponding to a CO partial current density of 220 mA/cm -2 . In situ X-ray absorption spectroscopy studies showed that regardless of facet Pd transformed into Pd hydride (PdH) under reaction conditions. DFT calculations show that the reduced binding energies of CO and HOCO intermediates on PdH(111) are key parameters to the high current density and Faradaic efficiency in CO 2 to CO conversion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reaching the Energy Density Limit of Layered O3‐NaNi 0.5 Mn 0.5 O 2 Electrodes via Dual Cu and Ti Substitution

Abstract Although being less competitive energy density‐wise, Na‐ion batteries are serious alternatives to Li‐ion ones for applications where cost and sustainability dominate. O3‐type sodium layered oxides could partially overcome the energy limitation, but their practical use is plagued by a reaction process that enlists numerous phase changes and volume variations while additionally being moisture sensitive. Here, it is shown that the double substitution of Ti for Mn and Cu for Ni in O3‐NaNi 0.5− y Cu y Mn 0.5− z Ti z O 2 can alleviate most of these issues. Among this series, electrodes with specific compositions are identified that can reversibly release and uptake ≈0.9 sodium per formula unit via a smooth voltage‐composition profile enlisting minor lattice volume changes upon cycling as opposed to Δ V / V ≈23% in the parent NaNi 0.5 Mn 0.5 O 2 while showing a greater resistance against moisture. The positive attributes of substitution are rationalized by structure considerations supported by density functional theory (DFT) calculations. Electrodes with sustained capacities of ≈180 mAh g −1 are successfully implemented into 18 650 Na‐ion cells having greater performances, energy density‐wise (≈250 Wh L −1 ), than today's Na 3 V 2 (PO 4 ) 2 F 3 /HC Na‐ion technology which excels in rate capabilities. These results constitute a step forward in increasing the practicality of Na‐ion technology with additional opportunities for applications in which energy density prevails over rate capability.

Wang, Qing↗

Microstructure of Methylammonium Lead iodide Perovskite Thin Films: A Comprehensive Study of the Strain and Texture

Controlling the microstructure of hybrid halide perovskite thin films is essential for optimizing their performance in optoelectronic devices. It is well established that the strain state of the perovskite layer affects its stability. Likewise, the orientation of the perovskite lattice is a determining parameter as these materials have shown pronounced anisotropies in their physical and mechanical properties. In this work, the authors focus on the understanding of the mechanisms that govern the strain and texture observed in MAPbI 3 thin films deposited on various oxide substrates. A thorough study of the evolution of the strain of the perovskite layer upon cooling down to room temperature from the crystallization temperature (100 °C) shows an essentially relaxed behavior of the perovskite layers. This result contradicts the commonly accepted hypothesis according to which MAPbI 3 layers synthesized above ambient temperature are strained due to the large mismatch in the thermal expansion coefficients of the perovskite and its substrate. The texture in MAPbI 3 layers is investigated by means of synchrotron full-field diffraction X-ray microscopy. This technique allows the direct observation of the [hh0] and [00l]-oriented domains at the origin of the observed textures, demonstrating both their twin and ferroelastic nature. The stability of the different domain orientations is investigated by DFT calculations, illustrating the determining role of the chemical environment at the film-substrate interface. PbI 2- terminated surfaces are found to favor the [hh0] orientations while for MAI-terminated ones, both [hh0] and [00l] domains are equally stabilized. The different results constitute an important step of clarification and understanding from the perspective of controlling the microstructure of perovskite layers.

36 MATERIALS SCIENCE↗

Unconventional Highly Active and Stable Oxygen Reduction Catalysts Informed by Computational Design Strategies

Abstract Discovering and engineering new materials with fast oxygen surface exchange kinetics and robust long‐term stability is essential for the large‐scale, economically viable commercialization of solid oxide fuel cell (SOFC) technology. The perovskite catalyst material BaFe 0.125 Co 0.125 Zr 0.75 O 3 (BFCZ75), predicted to be promising from recent density functional theory (DFT) calculations and unconventional due to its extremely high Zr content and low electronic conductivity, exhibits oxygen reduction reaction surface exchange rates on par with Ba 0.5 Sr 0.5 Co 0.8 Fe 0.2 O 3 (BSCF) and excellent stability at typical operating temperatures. New composite electrodes are engineered by integrating BFCZ75 with commercial electrode materials La 1– x Sr x MnO 3 (LSM) and La 1– x Sr x Co y Fe 1– y O 3 (LSCF) and achieve high performance as measured by low area specific resistance (ASR) values, with the LSCF/BFCZ75 ASR values comparable to top performing noncomposite electrode materials such as SrCo 0.8 Sc 0.2 O 3– δ , BaNb 0.05 Fe 0.95 O 3– δ and BaCo 0.7 Fe 0.22 Y 0.08 O 3– δ . The use of BFCZ75 as a composite with LSCF achieving low ASR values shows that BFCZ75 is highly active and can easily integrate into existing SOFC material supply chains, lowering the barrier for potential commercial application of new electrode materials. Finally, these findings point to a broader unexplored class of perovskite materials with high fractions of redox inactive species (e.g., Zr, Nb, and Ta) that may unlock new pathways to realizing improved commercial SOFCs.

Jacobs, Ryan↗

Enhancing Photostability of Sn-Pb Perovskite Solar Cells by an Alkylammonium Pseudo-Halogen Additive

High-performance tin-lead perovskite solar cells (PSCs) are needed for all-perovskite-tandem solar cells. However, iodide related fast photodegradation severely limits the operational stability of Sn-Pb perovskites despite the demonstrated high efficiency and thermal stability. Herein, this work employs an alkylammonium pseudo-halogen additive to enhance the power conversion efficiency (PCE) and photostability of methylammonium (MA)-free, Sn-Pb PSCs. Density functional theory (DFT) calculations reveal that the pseudo-halogen tetrafluoroborate (BF 4 - ) has strong binding capacity with metal ions (Sn 2+ /Pb 2+ ) in the Sn-Pb perovskite lattice, which lowers iodine vacancy formation. Upon combining BF 4 - with an octylammonium (OA + ) cation, the PCE of the device with a built-in light-scattering layer is boosted to 23.7%, which represents a new record for Sn-Pb PSCs. The improved efficiency benefits from the suppressed defect density. Under continuous 1 sun illumination, the OABF 4 embodied PSCs show slower generation of interstitial iodides and iodine, which greatly improves the device photostability under open-circuit condition. Moreover, the device based on OABF 4 retains 88% of the initial PCE for 1000 h under the maximum-power-point tracking (MPPT) without cooling.

14 SOLAR ENERGY↗

Tuned Reactivity at the Lithium Metal–Argyrodite Solid State Electrolyte Interphase

Thin intermetallic Li 2 Te–LiTe 3 bilayer (0.75 µm) derived from 2D tellurene stabilizes the solid electrolyte interphase (SEI) of lithium metal and argyrodite (LPSCl, Li 6 PS 5 Cl) solid-state electrolyte (SSE). Tellurene is loaded onto a standard battery separator and reacted with lithium through single-pass mechanical rolling or transferred directly to SSE surface by pressing. State-of-the-art electrochemical performance is achieved, e.g., symmetric cell stable for 300 cycles (1800 h) at 1 mA cm -2 and 3 mAh cm -2 (25% DOD, 60 µm foil). Cryo-stage focused ion beam (Cryo-FIB) sectioning and Raman mapping demonstrate that the Li 2 Te–LiTe 3 bilayer impedes SSE decomposition. The unmodified Li–LPSCl interphase is electrochemically unstable with a geometrically heterogeneous reduction decomposition reaction front that extends deep into the SSE. Decomposition drives voiding in Li metal due to its high flux to the reaction front, as well as voiding in the SSE due to the associated volume changes. Analysis of cycled SSE found no evidence for pristine (unreacted) lithium metal filaments/dendrites, implying failure driven by decomposition phases with sufficient electrical conductivity that span electrolyte thickness. In conclusion, DFT calculations clarify thermodynamic stability, interfacial adhesion, and electronic transport properties of interphases, while mesoscale modeling examines interrelations between reaction front heterogeneity (SEI heterogeneity), current distribution, and localized chemo-mechanical stresses.

25 ENERGY STORAGE↗

Effect of the Nature of Both Cation and Anion Substitution on the Structural Symmetry of Li‐Rich 3 d ‐Metal Chalcogenide Electrodes

Abstract Li‐rich layered chalcogenides have recently led to better understanding of the anionic redox process and its associated high capacity while providing ways to overcome its practical limitations of voltage fade and irreversibility. This study reports on the feasibility of triggering anionic activity in Li 2 TiS 3 , through anionic substitution (Se for S) or cationic substitution (Fe for Ti). Herein, the chalcogenide chemical space is further explored to prepare mono‐substituted Li 1.7 Ti 0.85 Mn 0.45 Ch 3 (Ch = S/Se) and doubly substituted cationic and anionic phases (Li 1.7 Ti 0.85 Fe 0.45 S 3‐z Se z ) which crystallize either in the O3‐ or O1‐type structures depending upon substituents. All series show a bell‐shape capacity variation as function of the transition metal (TM) substitution degree with values up to 240 mAh g −1 . For specific compositions, a structural O3 to O1 phase transition is observed upon Li removal, which is not reversible upon Li re‐insertion due to kinetic limitations and negatively affects long‐term cycling performance. Density functional theory (DFT) calculations confirm the O3/O1 relative stability along the different series and point subtle electronic differences in the TM‐doping, rationalizing the structural and electrochemical behaviors of these phases upon cycling. These findings provide further insights into the link between structural and electronic stability, which is of key importance for designing chalcogenide‐based anionic redox compounds.

Chemistry↗

Long‐Range Confinement‐Driven Enrichment of Surface Oxygen‐Relevant Species Promotes C−C Electrocoupling in CO 2 Reduction

Abstract CO 2 reduction is a highly attractive route to transform CO 2 into useful feedstocks, of which C 2 products are more desired than C 1 , yet face high kinetic barriers of C−C electrocoupling. Here, the engineering of pore‐enabled local confinement reaction environments is reported for tuning the enrichment of surface‐adsorbed oxygen‐relevant species and the establishment of their pronounced benefits in promoting C−C coupling over oxide‐derived Cu‐based catalysts. A new approach of utilizing the microphase separation of a block copolymer is developed to fabricate bicontinuous mesoporous CuO nanofibers (CuO‐BPNF). The enhanced confinement from long‐range mesochannels enables the adsorption of OH ad /O ad on the Cu surface at a wide negative potential range of −0.7 – −1.3 V in CO 2 reduction, which cannot be achieved over conventional deficient and short‐range pores. Constant‐potential DFT calculations reveal that the surface‐bound oxygen species weakens *CO affinity with the Cu (111) surface and lowers the kinetic barriers for both *CO−CO dimerization and *CO hydrogenation to enable *CO−CHO coupling. Accordingly, a CO 2 ‐to‐C 2 Faradaic efficiency of 74.7% over CuO‐BPNF is shown, significantly larger than counterparts with conventional pores. This work offers a general design principle of confinement engineering to manage the adsorption of reactive species for steering reaction pathways in interfacial catalysis.

Chemistry↗

Vacancy Mediated Electrooxidation of 5‐Hydroxymethyl Furfuryl Using Defect Engineered Layered Double Hydroxide Electrocatalysts

Abstract Electrochemical biomass oxidation coupled with hydrogen evolution offers a promising route to generate value‐added chemicals and clean energy. The complex adsorption behavior of 5‐hydroxymethyl furfural (HMF) and hydroxyl ions (OH − ) on the electrocatalyst surface during HMF electrooxidation reaction (HMFOR) necessitates an in‐depth understanding of active sites available for adsorption. Herein, oxygen vacancy (V O ) defects are introduced in NiFe layered double hydroxide (LDH) using Ce dopants to manipulate electronic structure. Synchrotron‐based HE‐XRD and XAS indicate negligible V O in La‐doped NiFe while Ce doping leads to V O defects due to flexible Ce redox (Ce 3+ ↔ Ce 4+ ). The V O ‐rich Ce‐NiFe exhibits higher Faradic efficiency of ≈90% to produce 2,5‐furan dicarboxylic acid (FDCA), far greater than ≈60% for NiFe V O in Ce‐NiFe act as alternative active sites for OH − adsorption, hence reducing adsorption competition for the same metal sites. DFT calculation results corroborate experimental findings by showcasing that the presence of V O in Ce‐NiFe manipulates the adsorption energies and facilitates the chemical adsorption OH − in V O to improve HMFOR. In situ HE‐XRD derived pair distribution function coupled to RMC simulations confirm OH − trapping in V O and HMF adsorption on metal centers as evident by interlayer distance evolution. Taken together, this work showcases routes for dual‐site electrocatalyst design for improved biomass electrooxidation.

Chemistry↗

Co‐Electrolysis of CO 2 and H 2 O to Syngas on Bimetallic Pd x Cu 1‐ x Catalysts for Tandem Thermochemical Conversion to Carbon Nanofibers

Electrification of chemical production using renewable energy and abundant feedstocks offers a promising pathway for decarbonizing the chemical industry. Current efforts on CO 2 valorization largely focus on making chemicals and fuels. Here, to help achieve net-negative emissions through long-term carbon storage, this study aims to develop efficient electrocatalysts for a tandem electrochemical-thermochemical process to convert CO 2 into carbon nanofibers (CNFs). CO 2 and water are first electrochemically reduced in a membrane electrode assembly (MEA) electrolyzer to produce syngas (CO + H 2 ), which is subsequently fed into a thermochemical packed bed reactor to facilitate CNF growth. This work systematically evaluated Pd x Cu 1-x bimetallic electrocatalysts to assess the effect of Pd–Cu alloying on enhancing syngas production while reducing Pd loading. Transmission electron microscopy and Raman spectroscopy confirmed the formation of high-purity, crystalline CNFs, regardless of the syngas composition from the MEA. In situ X-ray absorption spectroscopy and X-ray diffraction measurements revealed that increasing Cu content in the Pd x Cu 1-x alloy progressively inhibited palladium hydride formation, consistent with DFT calculations on the stability of Pd x Cu 1-x under reducing electrochemical potentials.

58 GEOSCIENCES↗

Simultaneously upgrading CO 2 and light alkanes into value-added products

We will discuss recent results from our group in reacting CO 2 and light alkanes to produce syngas, olefins, aromatics, and oxygenates. We will mainly use the simultaneous upgrading of CO 2 and ethane (SU-CO 2 Et) as examples to demonstrate the feasibility and reaction pathways of these processes. We will briefly discuss synthesis methods and essential structural characterization techniques that can be applied to SU-CO 2 Et catalysts. We will then illustrate how to identify and apply distinct active sites for different upgrading processes, using a combination of kinetic studies, in situ characterization, and density functional theory (DFT) calculations. We will conclude the Perspective by pointing out challenges and potential directions in catalyst design and synthesis, as well as structural characterization and mechanistic investigations, to further advance the simultaneous upgrading of CO 2 and light alkanes.

03 NATURAL GAS↗

Propane σ‐Complexes on PdO(101): Spectroscopic Evidence of the Selective Coordination and Activation of Primary CH Bonds

Abstract Achieving selective CH bond cleavage is critical for developing catalytic processes that transform small alkanes to value‐added products. The present study clarifies the molecular‐level origin for an exceptionally strong preference for propane to dissociate on the crystalline PdO(101) surface via primary CH bond cleavage. Using reflection absorption infrared spectroscopy (RAIRS) and density functional theory (DFT) calculations, we show that adsorbed propane σ‐complexes preferentially adopt geometries on PdO(101) in which only primary CH bonds datively interact with the surface Pd atoms at low propane coverages and are thus activated under typical catalytic reaction conditions. We show that a propane molecule achieves maximum stability on PdO(101) by adopting a bidentate geometry in which a HPd dative bond forms at each CH 3 group. These results demonstrate that structural registry between the molecule and surface can strongly influence the selectivity of a metal oxide surface in activating alkane CH bonds.

Zhang, Feng↗

Identifying Different Types of Catalysts for CO 2 Reduction by Ethane through Dry Reforming and Oxidative Dehydrogenation

Abstract The recent shale gas boom combined with the requirement to reduce atmospheric CO 2 have created an opportunity for using both raw materials (shale gas and CO 2 ) in a single process. Shale gas is primarily made up of methane, but ethane comprises about 10 % and reserves are underutilized. Two routes have been investigated by combining ethane decomposition with CO 2 reduction to produce products of higher value. The first reaction is ethane dry reforming which produces synthesis gas (CO+H 2 ). The second route is oxidative dehydrogenation which produces ethylene using CO 2 as a soft oxidant. The results of this study indicate that the Pt/CeO 2 catalyst shows promise for the production of synthesis gas, while Mo 2 C‐based materials preserve the CC bond of ethane to produce ethylene. These findings are supported by density functional theory (DFT) calculations and X‐ray absorption near‐edge spectroscopy (XANES) characterization of the catalysts under in situ reaction conditions.

Porosoff, Marc D.↗

Water Oxidation by Ruthenium Complexes Incorporating Multifunctional Bipyridyl Diphosphonate Ligands

Abstract We describe herein the synthesis and characterization of ruthenium complexes with multifunctional bipyridyl diphosphonate ligands as well as initial water oxidation studies. In these complexes, the phosphonate groups provide redox‐potential leveling through charge compensation and σ donation to allow facile access to high oxidation states. These complexes display unique pH‐dependent electrochemistry associated with deprotonation of the phosphonic acid groups. The position of these groups allows them to shuttle protons in and out of the catalytic site and reduce activation barriers. A mechanism for water oxidation by these catalysts is proposed on the basis of experimental results and DFT calculations. The unprecedented attack of water at a neutral six‐coordinate [Ru IV ] center to yield an anionic seven‐coordinate [Ru IV −OH] − intermediate is one of the key steps of a single‐site mechanism in which all species are anionic or neutral. These complexes are among the fastest single‐site catalysts reported to date.

Xie, Yan↗

Ordered PdCu‐Based Nanoparticles as Bifunctional Oxygen‐Reduction and Ethanol‐Oxidation Electrocatalysts

Abstract The development of superior non‐platinum electrocatalysts for enhancing the electrocatalytic activity and stability for the oxygen‐reduction reaction (ORR) and liquid fuel oxidation reaction is very important for the commercialization of fuel cells, but still a great challenge. Herein, we demonstrate a new colloidal chemistry technique for making structurally ordered PdCu‐based nanoparticles (NPs) with composition control from PdCu to PdCuNi and PtCuCo. Under the dual tuning on the composition and intermetallic phase, the ordered PdCuCo NPs exhibit better activity and much enhanced stability for ORR and ethanol‐oxidation reaction (EOR) than those of disordered PdCuM NPs, the commercial Pt/C and Pd/C catalysts. The density functional theory (DFT) calculations reveal that the improved ORR activity on the PdCuM NPs stems from the catalytically active hollow sites arising from the ligand effect and the compressive strain on the Pd surface owing to the smaller atomic size of Cu, Co, and Ni.

Jiang, Kezhu↗

Thermally Stable and Regenerable Platinum–Tin Clusters for Propane Dehydrogenation Prepared by Atom Trapping on Ceria

Abstract Ceria (CeO 2 ) supports are unique in their ability to trap ionic platinum (Pt), providing exceptional stability for isolated single atoms of Pt. The reactivity and stability of single‐atom Pt species was explored for the industrially important light alkane dehydrogenation reaction. The single‐atom Pt/CeO 2 catalysts are stable during propane dehydrogenation, but are not selective for propylene. DFT calculations show strong adsorption of the olefin produced, leading to further unwanted reactions. In contrast, when tin (Sn) is added to CeO 2 , the single‐atom Pt catalyst undergoes an activation phase where it transforms into Pt–Sn clusters under reaction conditions. Formation of small Pt–Sn clusters allows the catalyst to achieve high selectivity towards propylene because of facile desorption of the product. The CeO 2 ‐supported Pt–Sn clusters are very stable, even during extended reaction at 680 °C. Coke formation is almost completely suppressed by adding water vapor to the feed. Furthermore, upon oxidation the Pt–Sn clusters readily revert to the atomically dispersed species on CeO 2 , making Pt–Sn/CeO 2 a fully regenerable catalyst.

Xiong, Haifeng↗

Single‐Domain Ferromagnet of Noncentrosymmetric Uniaxial Magnetic Ions and Magnetoelectric Interaction

Abstract The feasibility of a single‐domain ferromagnet based on uniaxial magnetic ions was examined. For a noncentrosymmetric uniaxial magnetic ion of magnetic moment μ at a site of local electric dipole moment p , it is unknown to date whether μ prefers to be parallel or antiparallel to μ . The nature of this magnetoelectric interaction was probed in terms of analogical reasoning based on the Rashba effect and density functional theory (DFT) calculations. We show that μ and p prefer an antiparallel arrangement, predict that Fe‐doped CaZnOS is a single‐domain ferromagnet like a bar magnet, and find the probable cause for the ferromagnetism and weak magnetization hysteresis in Fe‐doped hexagonal ZnO and ZnS at very low dopant concentrations.

Koo, Hyun‐Joo↗

A High‐Valent Non‐Heme μ‐Oxo Manganese(IV) Dimer Generated from a Thiolate‐Bound Manganese(II) Complex and Dioxygen

Abstract This study deals with the unprecedented reactivity of dinuclear non‐heme Mn II –thiolate complexes with O 2 , which dependent on the protonation state of the initial Mn II dimer selectively generates either a di‐μ‐oxo or μ‐oxo‐μ‐hydroxo Mn IV complex. Both dimers have been characterized by different techniques including single‐crystal X‐ray diffraction and mass spectrometry. Oxygenation reactions carried out with labeled 18 O 2 unambiguously show that the oxygen atoms present in the Mn IV dimers originate from O 2 . Based on experimental observations and DFT calculations, evidence is provided that these Mn IV species comproportionate with a Mn II precursor to yield μ‐oxo and/or μ‐hydroxo Mn III dimers. Our work highlights the delicate balance of reaction conditions to control the synthesis of non‐heme high‐valent μ‐oxo and μ‐hydroxo Mn species from Mn II precursors and O 2 .

Brazzolotto, Deborah↗