Search NASA⌕ Search

SEARCH · Search NASA

Results for “Display type.”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Interpretation of discrepancies in mass spectroscopy data obtained from different experimental configurations

Many helium mass spectrometer leak detectors at KSC employ sampling systems that feature hand held sniffer probes. Authors of general leakage-testing literature recommend sniffer probes for leak location but not for quantitative leakage measurement. Their use in the latter application at KSC involves assumptions that may be subtle. The purpose of the research effort reported herein was to establish the significance of indicated leak rates displayed by sniffer-probe equipped leak detectors and to determine whether the use of alternative hardware or testing procedures may reduce the uncertainty of leakage measurements made with them. The report classifies probe-type sampling systems for helium leak detectors according to their internal plumbing (direct or branched), presents a basic analysis of the fluid dynamics in the sampling system in the branched-conduit case, describes the usual test method for measuring the internal supply-to-sample flowrate ratio (a.k.a permeation ratio), and describes a concept for a sponge-tipped probe whose external supply-to-sample flowrate ratio promises to be lower than that of a simple-ended probe. One conclusion is that the main source of uncertainty in the use of probe-type sampling systems for leakage measurement is uncertainty in the external supply-to-sample flowrate ratio. In contrast, the present method for measuring the internal supply-to-sample flowrate ratio is quantitative and satisfactory. The implication is that probes of lower external supply-to-sample flowrate ratio must be developed before this uncertainty may be reduced significantly.

Russell, John M.↗

Latex samples for RAMSES electrophoresis experiment on IML 2

The objectives of these reported studies were to provide ground based support services for the flight experiment team for the RAMSES experiment to be flown aboard IML-2. The specific areas of support included consultation on the performance of particle based electrophoresis studies, development of methods for the preparation of suitable samples for the flight hardware, the screening of particles to obtain suitable candidates for the flight experiment, and the electrophoretic characterization of sample particle preparations. The first phases of these studies were performed under this contract, while the follow on work was performed under grant number NAG8 1081, 'Preparation and Characterization of Latex Samples for RAMSES Experiment on IML 2.' During this first phase of the experiment the following benchmarks were achieved: Methods were tested for the concentration and resuspension of latex samples in the greater than 0.4 micron diameter range to provide moderately high solids content samples free of particle aggregation which interferred with the normal functioning of the RAMSES hardware. Various candidate latex preparations were screened and two candidate types of latex were identified for use in the flight experiments, carboxylate modified latex (CML) and acrylic acid-acrylamide modified latex (AAM). These latexes have relatively hydrophilic surfaces, are not prone to aggregate, and display sufficiently low electrophoretic mobilities in the flight buffer so that they can be used to make mixtures to test the resolving power of the flight hardware.

Seaman, Geoffrey V. F.↗

High-Resolution LDA Measurements of Reynolds Stress in Boundary Layers and Wakes

The turbulent character of the boundary layer and wake associated with an airfoil has been studied at a Reynolds number of 10(exp 6) and a Mach number of 0.1. To accomplish these measurements, a unique laser Doppler anemometer (LDA) has been developed that is capable of sensing two velocity components from a remote distance of 2.13 m. Using special simultaneity logic and counter-type signal processors, the geometrical features of the LDA have been exploited to provide variable spatial resolution as low as 0.2 mm. By combining the LDA with an on-line computerized data acquisition and display system, it has been possible to measure mean velocity and Reynolds stress tensor distribution at several locations along the upper surface of a 0.9 m chord, flapped airfoil installed in the Ames 7- by 10-Foot Wind Tunnel.

Orloff, Kenneth↗

Smagglce: Surface Modeling and Grid Generation for Iced Airfoils: Phase 1 Results

SmaggIce (Surface Modeling and Grid Generation for Iced Airfoils) is a software toolkit used in the process of aerodynamic performance prediction of iced airfoils with grid-based Computational Fluid Dynamics (CFD). It includes tools for data probing, boundary smoothing, domain decomposition, and structured grid generation and refinement. SmaggIce provides the underlying computations to perform these functions, a GUI (Graphical User Interface) to control and interact with those functions, and graphical displays of results, it is being developed at NASA Glenn Research Center. This paper discusses the overall design of SmaggIce as well as what has been implemented in Phase 1. Phase 1 results provide two types of software tools: interactive ice shape probing and interactive ice shape control. The ice shape probing tools will provide aircraft icing engineers and scientists with an interactive means to measure the physical characteristics of ice shapes. On the other hand, the ice shape control features of SmaggIce will allow engineers to examine input geometry data, correct or modify any deficiencies in the geometry, and perform controlled systematic smoothing to a level that will make the CFD process manageable.

Vickerman, Mary B.↗

Comparison of Ridges on Triton and Europa

Triton and Europa each display a variety of ridges and associated troughs. The resemblance of double ridges on these two satellites has been previously noted [R. Kirk, pers. comm.], but as yet, the similarities and differences between these feature types have not been examined in any detail. Triton s ridges, and Europa s, exhibit an evolutionary sequence ranging from isolated troughs, through doublet ridges, to complex ridge swaths [1, 2]. Comparison of ridges on Europa to those on Triton may provide insight into their formation on both satellites, and thereby have implications for the satellites' histories.

Prockter, L. M.↗

Remote Sensing Time Series Product Tool

The TSPT (Time Series Product Tool) software was custom-designed for NASA to rapidly create and display single-band and band-combination time series, such as NDVI (Normalized Difference Vegetation Index) images, for wide-area crop surveillance and for other time-critical applications. The TSPT, developed in MATLAB, allows users to create and display various MODIS (Moderate Resolution Imaging Spectroradiometer) or simulated VIIRS (Visible/Infrared Imager Radiometer Suite) products as single images, as time series plots at a selected location, or as temporally processed image videos. Manually creating these types of products is extremely labor intensive; however, the TSPT development tool makes the process simplified and efficient. MODIS is ideal for monitoring large crop areas because of its wide swath (2330 km), its relatively small ground sample distance (250 m), and its high temporal revisit time (twice daily). Furthermore, because MODIS imagery is acquired daily, rapid changes in vegetative health can potentially be detected. The new TSPT technology provides users with the ability to temporally process high-revisit-rate satellite imagery, such as that acquired from MODIS and from its successor, the VIIRS. The TSPT features the important capability of fusing data from both MODIS instruments onboard the Terra and Aqua satellites, which drastically improves cloud statistics. With the TSPT, MODIS metadata is used to find and optionally remove bad and suspect data. Noise removal and temporal processing techniques allow users to create low-noise time series plots and image videos and to select settings and thresholds that tailor particular output products. The TSPT GUI (graphical user interface) provides an interactive environment for crafting what-if scenarios by enabling a user to repeat product generation using different settings and thresholds. The TSPT Application Programming Interface provides more fine-tuned control of product generation, allowing experienced programmers to bypass the GUI and to create more user-specific output products, such as comparison time plots or images. This type of time series analysis tool for remotely sensed imagery could be the basis of a large-area vegetation surveillance system. The TSPT has been used to generate NDVI time series over growing seasons in California and Argentina and for hurricane events, such as Hurricane Katrina.

Predos, Don↗

Fluence Uniformity Measurements in an Electron Accelerator Used for Irradiation of Extended Area Solar Cells and Electronic Circuits for Space Applications

It is common to have liquid crystal displays and electronic circuit boards with area sizes of the order of 20x20 sq cm on board of satellites and space vehicles. Usually irradiating them at different fluence values assesses the radiation damage in these types of devices. As a result, there is a need for a radiation source with large spatial fluence uniformity for the study of the damage by radiation from space in those devices. Kent State University s Program on Electron Beam Technology has access to an electron accelerator used for both research and industrial applications. The electron accelerator produces electrons with energies in the interval from 1 to 5 MeV and a maximum beam power of 150 kW. At such high power levels, the electron beam is continuously scanned back and forth in one dimension in order to provide uniform irradiation and to prevent damage to the sample. This allows for the uniform irradiation of samples with an area of up to 1.32 sq m. This accelerator has been used in the past for the study of radiation damage in solar cells (1). However in order to irradiate extended area solar cells there was a need to measure the uniformity of the irradiation zone in terms of fluence. In this paper the methodology to measure the fluence uniformity on a sample handling system (linear motion system), used for the irradiation of research samples, along the irradiation zone of the above-mentioned facility is described and the results presented. We also illustrate the use of the electron accelerator for the irradiation of large area solar cells (of the order of 156 sq cm) and include in this paper the electrical characterization of these types of solar cells irradiated with 5 MeV electrons to a total fluence of 2.6 x 10(exp 15) e/sq cm.

Uribe, Roberto M.↗

Descriptive Study Analyzing Discrepancies in a Software Development Project Change Request (CR) Assessment Process and Recommendations for Process Improvements

The Change Request (CR) assessment process is essential in the display development cycle. The assessment process is performed to ensure that the changes stated in the description of the CR match the changes in the actual display requirements. If a discrepancy is found between the CR and the requirements, the CR must be returned to the originator for corrections. Data will be gathered from each of the developers to determine the type of discrepancies and the amount of time spent assessing each CR. This study will determine the most common types of discrepancies and the amount of time spent assessing those issues. The results of the study will provide a foundation for future improvements as well as a baseline for future studies.

Cunningham, Kenneth J.↗

Hydroxyapatite-binding peptides for bone growth and inhibition

Hydroxyapatite (HA)-binding peptides are selected using combinatorial phage library display. Pseudo-repetitive consensus amino acid sequences possessing periodic hydroxyl side chains in every two or three amino acid sequences are obtained. These sequences resemble the (Gly-Pro-Hyp).sub.x repeat of human type I collagen, a major component of extracellular matrices of natural bone. A consistent presence of basic amino acid residues is also observed. The peptides are synthesized by the solid-phase synthetic method and then used for template-driven HA-mineralization. Microscopy reveal that the peptides template the growth of polycrystalline HA crystals .about.40 nm in size.

60 APPLIED LIFE SCIENCES↗

Tomography of massive stars from core collapse to supernova shock breakout

Neutrinos and gravitational waves are the only direct probes of the inner dynamics of a stellar core collapse. They are also the first signals to arrive from a supernova (SN) and, if detected, establish the moment when the shock wave is formed that unbinds the stellar envelope and later initiates the optical display upon reaching the stellar surface with a burst of UV and X-ray photons, the shock breakout (SBO). We discuss how neutrino observations can be used to trigger searches to detect the elusive SBO event. Observation of the SBO would provide several important constraints on progenitor structure and the explosion, including the shock propagation time (the duration between the neutrino burst and SBO), an observable that is important in distinguishing progenitor types. Our estimates suggest that next-generation neutrino detectors could exploit the overdensity of nearby SNe to provide several such triggers per decade, more than an order-of-magnitude improvement over the present.

79 ASTRONOMY AND ASTROPHYSICS↗

Distinct abscisic acid signaling pathways for modulation of guard cell versus mesophyll cell potassium channels revealed by expression studies in Xenopus laevis oocytes

Regulation of guard cell ion transport by abscisic acid (ABA) and in particular ABA inhibition of a guard cell inward K(+) current (I(Kin)) is well documented. However, little is known concerning ABA effects on ion transport in other plant cell types. Here we applied patch clamp techniques to mesophyll cell protoplasts of fava bean (Vicia faba cv Long Pod) plants and demonstrated ABA inhibition of an outward K(+) current (I(Kout)). When mesophyll cell protoplast mRNA (mesophyll mRNA) was expressed in Xenopus laevis oocytes, I(Kout) was generated that displayed similar properties to I(Kout) observed from direct analysis of mesophyll cell protoplasts. I(Kout) expressed by mesophyll mRNA-injected oocytes was inhibited by ABA, indicating that the ABA signal transduction pathway observed in mesophyll cells was preserved in the frog oocytes. Co-injection of oocytes with guard cell protoplast mRNA and cRNA for KAT1, an inward K(+) channel expressed in guard cells, resulted in I(Kin) that was similarly inhibited by ABA. However, oocytes co-injected with mesophyll mRNA and KAT1 cRNA produced I(Kin) that was not inhibited by ABA. These results demonstrate that the mesophyll-encoded signaling mechanism could not substitute for the guard cell pathway. These findings indicate that mesophyll cells and guard cells use distinct and different receptor types and/or signal transduction pathways in ABA regulation of K(+) channels.

NASA Discipline Plant Biology↗

The Spectacular Ultraviolet Flash from the Peculiar Type Ia Supernova 2019yvq

Early observations of Type Ia supernovae (SNe Ia) provide essential clues for understanding the progenitor system that gave rise to the terminal thermonuclear explosion. Here, we present exquisite observations of SN 2019yvq, the second observed SN Ia, after iPTF 14atg, to display an early flash of emission in the ultraviolet (UV) and optical. Our analysis finds that SN 2019yvq was unusual, even when ignoring the initial flash, in that it was moderately underluminous for a SN Ia ($M_g \approx -18.5$ mag at peak) yet featured very high absorption velocities ($v \approx 15,0000$ km s -1 for Si II λ6355 at peak). We find that many of the observational features of SN 2019yvq, aside from the flash, can be explained if the explosive yield of radioactive 56 Ni is relatively low (we measure $M_{^{56}\mathrm{Ni}} = 0.31 \pm 0.05\,M_\odot$) and it and other iron-group elements are concentrated in the innermost layers of the ejecta. To explain both the UV/optical flash and peak properties of SN 2019yvq we consider four different models: interaction between the SN ejecta and a nondegenerate companion, extended clumps of 56 Ni in the outer ejecta, a double-detonation explosion, and the violent merger of two white dwarfs. Each of these models has shortcomings when compared to the observations; it is clear additional tuning is required to better match SN 2019yvq. In closing, we predict that the nebular spectra of SN 2019yvq will feature either H or He emission, if the ejecta collided with a companion, strong [Ca II] emission, if it was a double detonation, or narrow [O I] emission, if it was due to a violent merger.

79 ASTRONOMY AND ASTROPHYSICS↗

THE DISCOVERY OF NEW WARM DEBRIS DISKS AROUND F-TYPE STARS

We report the discovery of four rare debris disks with warm excesses around F stars, significantly increasing the number of such systems known in the solar neighborhood. Three of the disks are consistent with the predictions of steady-state planetesimal disk evolution models. The oldest source, HD 169666, displays a dust fractional luminosity too high to be in a steady state and we suggest that this system recently underwent a transient event of dust production. In addition, two spectra of this star separated by approximately three years show silicate emission features, indicative of submicron- to micron-sized grains. We argue that such small grains would be rapidly depleted and their presence in both spectra suggests that the production of small dust is continuous over a timescale of at least a few years. We predict that systems showing variable mid-infrared spectra, if they exist, will provide valuable help in distinguishing the possible scenarios proposed for dust replenishment.

99 GENERAL AND MISCELLANEOUS↗

Natural Displays: Anticipating the Future at NASA

There are two ways in which the human factors discipline is called upon to contribute to the development of new products or systems at NASA Ames Research Center. First, there is the application of known human factors principles in the design of a product. This type of application of human factors expertise can be called upon at any time in the evolution of a system or product, with the probability of success a direct function of how early in the system development cycle that the human factors experts are called in. This dependence on timing is due to two things. First, late in the development cycle many decisions have been made that cannot be unmade, and human factors solutions by necessity take on the nature of work-arounds. Second, in many cases where highly innovative or unusual systems are being proposed, known principles are not sufficient to answer design questions. Since most projects work to deadlines, there is generally not enough time late in a project for time-consuming human factors research efforts. In fact, due to the nature of project management, intermediate deadlines often preclude significant research efforts even when the human factors effort is brought in at the beginning. Therefore, critical research, a second function of the human factors effort at NASA Ames, is needed before projects are initiated. How do we determine the necessary research?

Johnson, Walter W.↗

Three tetranuclear copper(II) cluster-based complexes constructed from 4-amino-1,2,4-triazole and different aromatic carboxylates: Assembly, structures, electrochemical and magnetic properties

Three new tetranuclear copper(II) cluster-based complexes constructed from 4-amino-1,2,4-triazole (atrz) and three types of aromatic carboxylates, [Cu{sub 4}({mu}{sub 3}-OH){sub 2}(atrz){sub 2}(DNBA){sub 6}] (1), [Cu{sub 4}({mu}{sub 3}-OH){sub 2}(atrz){sub 2}(1,3-BDC){sub 3}]{center_dot}2H{sub 2}O (2) and [Cu{sub 4}({mu}{sub 3}-OH){sub 2}(atrz){sub 2}(SIP){sub 2}]{center_dot}4H{sub 2}O (3) (HDNBA=3,5-dinitrobenzoic acid, 1,3-H{sub 2}BDC=1,3-benzenedicarboxylic acid and NaH{sub 2}SIP=sodium 5-sulfoisophthalate), have been hydrothermally synthesized and structurally characterized. Complex 1 displays a single-molecular Cu{sup II}{sub 4} cluster structure, which is further connected by the intermolecular hydrogen-bonding interactions to form a 2D supramolecular layer. In 2, there also exist tetranuclear Cu{sup II}{sub 4} clusters, which are linked by the 1,3-BDC anions to give a 3D NaCl-type framework. In 3, the Cu{sup II}{sub 4} clusters are connected by the carboxyl and sulfo groups of SIP anions to generate 3D (4,8)-connected framework with a (4{sup 10}{center_dot}6{sup 14}{center_dot}8{sup 4})(4{sup 5}{center_dot}6){sub 2} topology. The atrz ligand conduces to the construction of tetranuclear copper(II) clusters and the carboxylates with different non-carboxyl substituent show important effects on the final structures of the title complexes. The electrochemical and magnetic properties of 1-3 have been investigated. - Graphical abstract: Three tetranuclear copper(II) cluster-based complexes based on different carboxylates have been synthesized under hydrothermal conditions. The carboxylate anions play a key role in the formation of three different structures. Highlights: Black-Right-Pointing-Pointer Three new tetranuclear copper(II) cluster-based complexes have been obtained. Black-Right-Pointing-Pointer The atrz conduces to the construction of tetranuclear copper(II) clusters. Black-Right-Pointing-Pointer Carboxylates show important effect on the structures of title complexes. Black-Right-Pointing-Pointer Magnetic properties and electrochemical behaviors have been reported.

36 MATERIALS SCIENCE↗

SOAT1 deficiency attenuates atherosclerosis by regulating inflammation and cholesterol transportation via HO-1 pathway

Highlights: • Over-expression of SOAT1 in endothelial cells contributes to atherosclerotic lesions. • SOAT1 deficiency reduces inflammation, collagen accumulation and oxidative stress in ApoE{sup –/–} mice fed with HFD. • SOAT1 deletion reduces cholesterol transportation in HFD-fed ApoE{sup −/-} mice. • SOAT1 suppression reduces inflammation and cholesterol transportation through HO-1 pathway in HUVECs. Sterol O-acyltransferase 1 (SOAT1) is a key enzyme for cholesteryl ester biosynthesis. The objective of the present study is to investigate the role and underlying molecular mechanisms of SOAT1 in atherosclerosis. Our results indicated that SOAT1 was highly expressed in endothelial cells of atherosclerotic lesions in human patients with atherosclerosis and in apolipoprotein E deficient (ApoE{sup −/-}) mice fed with high fat diet (HFD). We established a model of atherosclerosis using ApoE and SOAT1 gene double knockout (ApoE{sup −/−}SOAT1{sup −/−}) mice. SOAT1{sup −/−} alleviated HFD-induced and spontaneously developed atherosclerotic lesions in ApoE{sup −/-} mice, accompanied with the reduced triglyceride (TG), total cholesterol (TC) and low-density lipoprotein-cholesterol (LDL-C), while the enhanced high-density lipoprotein-cholesterol (HDL-C) in serum of ApoE{sup −/-} mice. SOAT1{sup −/−} decreased collagen accumulation in the lesions. SOAT1{sup −/−} reduced macrophage infiltration and suppressed inflammation in ApoE{sup −/−} mice fed with HFD, as evidenced by the decreased expressions of pro-inflammatory cytokines, including interleukin (IL)-1β, IL-6 and tumor necrosis factor α (TNF-α). Of importance, SOAT1{sup −/−}-attenuated inflammation was along with the inactivation of β-catenin and nuclear factor kappa B (NF-κB) ApoE{sup −/-} mice. Moreover, oxidative stress observed in ApoE{sup −/-} mice was inactivated by SOAT1 double knockout. In addition, expression levels of fatty acid synthase (FAS), stearoyl-CoA desaturase 1 (SCD1), protein convertase subtilisin/kexin type 9 (PCSK 9) and sterol regulatory element-binding protein-1c (SREBP-1c) were decreased in liver, peritoneal macrophages and abdominal aortas of SOAT1-knockout ApoE{sup −/-} mice. In contrast, SOAT1{sup −/−} displayed improved expressions of peroxisome proliferator-activated receptor-γ (PPAR-γ) and lipoxygenase (LOX)-α in liver, peritoneal macrophages and abdominal aortas of ApoE{sup −/-} mice. Of note, the in vitro study, oxidized low-density lipoprotein (ox-LDL) incubation reduced heme oxygenase (HO-1) expressions in human umbilical vein endothelial cells (HUVECs), which was improved by SOAT1 knockdown. Pre-treatment of sn-protoporphyrin (SnPP), an important HO-1 inhibitor, abolished the role of SOAT1 inhibition in suppressing inflammation and abnormal cholesterol transportation. These results indicated that SOAT1 deficiency protected against atherosclerosis progression via inhibiting cholesterol transportation in ApoE{sup −/-} mice, which was, at least partly, dependent on HO-1 expressions.

60 APPLIED LIFE SCIENCES↗

Defect driven tailoring of colossal dielectricity of Reduced Graphene Oxide

Highlights: • Reduced graphene oxides (RGO) are prepared by two chemical routes. • Defects in RGO are characterized by Raman, FTIR and XPS studies. • Defects tailor colossal dielectricity in RGO. - Abstract: Reduced graphene oxide (RGO) is prepared in two different chemical routes where reduction of graphene oxide is performed by hydrazine hydrate and through high pressure in hydrothermal reactor. Samples are characterized by X-ray powdered diffraction (XRD), thermo gravimetric analysis (TGA), field emission scanning electron microscopy (FESEM) and tunneling electron microscopy (TEM). Types of defects are probed by Raman, FTIR spectroscopy and X-ray photoelectron spectroscopy (XPS). UV–vis absorption reveals different optical band gaps of the two RGOs. Conductivity mechanism is studied through I–V measurements displaying different characteristic features which are addressed due to the presence of defects appeared in different synthesis. Significantly high value (∼10{sup 4}) of dielectric permittivity at 10 MHz is attractive for technological application which could be tuned by the defects present in RGO.

36 MATERIALS SCIENCE↗

Synthesis, Structure, and Physical Properties of Ln(Cu,Al,Ga) 13-x (Ln = La-Pr, and Eu) and Eu(Cu,Al) 13-x

Ln(Cu,Al,Ga) 13–x (Ln = La–Pr, and Eu; x ~ 0.2) were synthesized by a combined Al/Ga flux. Single crystal X-ray and neutron diffraction experiments revealed that these compounds crystallize in the NaZn 13 structure-type (space group Fm3⁻c) with lattice parameters of a ~ 12 Å, V ~ 1600 Å, and Z ~ 8. Our final neutron models led us to conclude that Cu is occupationally disordered on the 8b Wyckoff site while Cu, Al, and Ga are substitutionally disordered on the 96i Wyckoff site of this well-known structure-type. The magnetic susceptibility data show that Ce(Cu,Al,Ga) 13–x and Pr(Cu,Al,Ga) 13–x exhibit paramagnetic behavior down to the lowest temperatures measured while Eu(Cu,Al,Ga) 13–x displays ferromagnetic behavior below 6 K. Eu(Cu,Al) 13–x was prepared via arc-melting and orders ferromagnetically below 8 K. The magnetocaloric properties of Eu(Cu,Al,Ga) 13–x and Eu(Cu,Al) 13–x were measured and compared. Additionally, an enhanced value of the Sommerfeld coefficient (γ = 356 mJ/mol-K 2 ) was determined for Pr(Cu,Al,Ga) 13–x . Herein, we present the synthesis, structural refinement details, and physical properties of Ln(Cu,Al,Ga) 13–x (Ln = La–Pr, and Eu) and Eu(Cu,Al) 13–x .

Phelan, W Adam↗