Search NASA⌕ Search

SEARCH · Search NASA

Results for “Kinetic Modelling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Probing intermediate temperature heat release in autoignition of C3-C4 iso-alcohol/gasoline blends

In this work, we report an experimental and modeling study on the blending effects of C3–C4 iso-alcohols, namely iso-propanol and iso-butanol, on the characteristics of intermediate temperature heat release (ITHR) for a research-grade gasoline (FACE-F) in a rapid compression machine operating at diluted/stoichiometric fuel loading, compressed pressure of 43 bar, and compressed temperatures from 700 to 970 K. Changes in ITHR behavior are characterized through ITHR extent and evolution at 0 to 30 vol% iso-alcohol blending levels. Experimental observations reveal the strong promoting and decelerating effects on ITHR extent and evolution, respectively, within the low-temperature regime for both iso-alcohols, with stronger effects seen for iso-propanol; within the intermediate-temperature regime, the influence of both iso-alcohols diminishes greatly. Comprehensive chemical kinetic modeling is undertaken using a recently developed gasoline surrogate/alcohol model in conjunction with a five-component gasoline surrogate (FGF-LLNL), with good agreement obtained with the experiments for all the blends. Sensitivity, rate of production and flux analyses highlight the importance of chemical kinetic interactions via both fuel-specific and non-fuel-specific reactions. Disabling all the chemical kinetic interactions between iso-alcohol and FGF-LLNL in carbonated/non-fuel-specific species leads to somewhat extended ITHR duration and reduced ignition reactivity. Direct comparison between FGF-LLNL/iso-propanol and FGF-LLNL/iso-butanol blends is also made, where iso-propanol and iso-butanol are found to influence ITHR characteristics via significantly different chemical kinetic interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mathematical analysis of laboratory microbial experiments demonstrating deterministic chaotic dynamics

Presented is a system of four ordinary differential equations and a mathematical analysis of microbiological experiments in a four-component chemostat—nutrient n, rods r, cocci c, and predators p. The analysis is consistent with the conclusion that previous experiments produced features of deterministic chaotic and classical dynamics depending on dilution rate. The surrogate model incorporates as much experimental detail as possible, but necessarily contains unmeasured parameters. The objective is to understand better the differences between model simulations and experimental results in complex microbial populations. The key methodology for simulation of chaotic dynamics, consistent with the measured dilution rate and microbial volume averages, was to cause the preference of p for r vs. c to vary with the r and c concentrations, to make r more competitive for nutrient than c, and to recycle some dying p biomass, leading to a modified version of the Monod kinetics model. Our mathematical model demonstrated that the occurrence of chaotic dynamics requires a predator, p, preference for r versus c to increase significantly with increases in r and c populations. Also included is a discussion of several generalizations of the existing model and a possible involvement of the minimum energy dissipation principle. This principle appears fundamental to thermodynamic systems including living systems. Several new experiments are suggested.

59 BASIC BIOLOGICAL SCIENCES↗

Investigation of the process of mixing reagents in the laser chamber of active medium generators of continuous-wave chemical lasers with promising nozzle arrays

It is shown that the use of a toothed nozzle array in the active medium generator (AMG) of continuous-wave chemical lasers (CWCLs) allows more efficient mixing of reagents to be achieved in the laser chamber than in an AMG with a slit nozzle array. The results of calculations of parameters of the active medium of a DF CWCL operating in the gain regime for the AMG with traditional and promising nozzle array designs are presented. A kinetic model of processes in the DF CWCL active medium is proposed, which allows obtaining a good agreement with the results of measurements of the small-signal gain. (paper)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nitrogen Trifluoride-Based Fluoride- Volatility Separations Process: Initial Studies

This document describes the results of our investigations on the potential use of nitrogen trifluoride as the fluorinating and oxidizing agent in fluoride volatility-based used nuclear fuel reprocessing. The conceptual process uses differences in reaction temperatures between nitrogen trifluoride and fuel constituents that produce volatile fluorides to achieve separations and recover valuable constituents. We provide results from our thermodynamic evaluations, thermo-analytical experiments, kinetic models, and provide a preliminary process flowsheet. The evaluations found that nitrogen trifluoride can effectively produce volatile fluorides at different temperatures dependent on the fuel constituent.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Nucleation rate controlled grain boundary and lattice creep

Nucleation versus diffusion rate-limited bicrystal and single crystal creep exhibit different scaling dependencies that enable the mechanisms to be isolated when measured as a function of sample size. It has recently been suggested that nucleation rate-limited kinetic models generally describe the non-Newtonian portion of the creep response well, but more direct evidence is required. This work analyzes the grain boundary creep response of UO 2 , a pyrochlore high entropy oxide, silver, and palladium, along with the lattice creep of silver using small-scale in situ loading in the transmission electron microscope. At small sizes, each system exhibits scale dependence associated with nucleation rate-limited kinetics. Fits of the data produce activation volumes on the order of a few Burgers vectors cubed with positive temperature coefficients as expected for nucleation kinetics. The activation enthalpies fall in the range of about 0.4 eV to 1.7 eV, being lower for the metals and higher for the oxides.

36 MATERIALS SCIENCE↗

Low O{sub 2} dissociation barrier on Pt(111) due to adsorbate-adsorbate interactions

O{sub 2} dissociation on Pt(111) has been followed at low and saturation coverage using temperature-programmed x-ray photoelectron spectroscopy and simulated with mean-field kinetic modeling, yielding dissociation (E{sub a}) and desorption (E{sub d}) barriers of 0.32 and 0.36 eV, respectively. Density functional theory calculations show that E{sub a} is strongly influenced by the O-O interatomic potential in the atomic final state: of the supercells considered, that which maximizes attractive third-nearest-neighbor interactions in the atomic final state yields both the lowest computed dissociation barrier (0.24 eV) and the best agreement with experiment. It is proposed that the effect of adsorbate-adsorbate interactions must be considered when modeling catalytic processes involving dissociative steps.

36 MATERIALS SCIENCE↗

Neural network and area method interpretation of pulsed experiments

The determination of the subcriticality level is an important issue in accelerator-driven system technology. The area method, originally introduced by N. G. Sjoestrand, is a classical technique to interpret flux measurement for pulsed experiments in order to reconstruct the reactivity value. In recent times other methods have also been developed, to account for spatial and spectral effects, which were not included in the area method, since it is based on the point kinetic model. The artificial neural network approach can be an efficient technique to infer reactivities from pulsed experiments. In the present work, some comparisons between the two methods are carried out and discussed. (authors)

43 PARTICLE ACCELERATORS↗

Nonisothermal Crystallization Kinetics of Glassy Mold Fluxes

Crystallization of the solid glassy mold flux film occurring in the gap between the initial shell and mold wall is important, as it determines the in-mold heat transfer and mold lubrication during the process of continuous casting. In order to study the nonisothermal crystallization behavior of the glassy mold flux film in the continuous casting mold, the continuous heating transformation diagram, crystallization mechanism, and precipitate phases were investigated using the single hot thermocouple technique, kinetic models, a scanning electron microscope, and an energy-dispersive spectrometer (EDS). The results show that the initial crystallization temperature for CaO-SiO{sub 2} based flux A ranges from [1086 K to 1147 K (813 °C to 874 °C)], which is lower than the case of CaO-Al{sub 2}O{sub 3} based flux B ranging from [1205 K to 1245 K (932 °C to 972 °C)]. The crystallization kinetics for flux A are constant nucleation rate, two-dimensional growth, and control by diffusion. For flux B, they are constant nucleation rate, three-dimensional growth, and control by interface reaction. Besides, the EDS results indicate that the precipitate crystals in fluxes A and B are CaSiO{sub 3} and Ca{sub 2}AlSiO{sub 4}, respectively.

36 MATERIALS SCIENCE↗

Large Eddy Simulation of an n-Dodecane Spray Flame Under Different Ambient Oxygen Conditions

An n-dodecane spray flame was simulated using a dynamic structure large eddy simulation (LES) model coupled with a detailed chemistry combustion model to understand the ignition processes and the quasi-steady state flame structure at different ambient oxygen concentrations, 13\%, 15\% and 21\% at ambient temperature of 900 K and ambient density of 22.8 kg/m3, which are typical diesel-engine relevant conditions with different levels of exhaust gas recirculation (EGR). The liquid spray was treated with a traditional Lagrangian method. A 103-species skeletal mechanism was used for n-dodecane chemical kinetic model. It is observed that the main ignitions occur in rich mixture and the flames are thickened around 35 to 40 mm off the spray axis due to the enhanced turbulence induced by the strong recirculation upstream just behind the head of the flames at different oxygen concentrations. At 1 ms after start of injection, the soot production is dominated by the broader region of high temperature in rich mixture instead of the stronger oxidation of the high peak temperature. Multiple realizations were performed for the 15\% O$_2$ condition to understand the realization to realization variation and to establish best practices for ensemble-averaging diesel spray flames. Two indexes are defined. The structure-similarity index analysis suggests at least 5 realizations are needed to obtain 99\% similarity for mixture fraction if average of 16 realizations are used as the target at 0.8 ms. However, this scenario may be different for different scalars of interest. It is found that 2 realizations would be enough to reach 99\% of similarity for temperature, while 8 and 14 realizations are required to achieve 99\% similarity for soot and OH mass fraction, respectively. Similar findings are noticed at 1 ms. More realizations are needed for the magnitude-similarity index for the similar level of similarity as the structure-similarity index.

Pei, Yuanjiang↗

Non-isothermal Crystallization Kinetics of Mold Fluxes for Casting High-Aluminum Steels

This paper investigates the crystallization behavior of CaO-SiO{sub 2}- and CaO-Al{sub 2}O{sub 3}-based mold fluxes for casting high-aluminum steels using single hot thermocouple technology, developed kinetic models, and scanning electron microscope. The results showed that the crystallization ability of the typical CaO-SiO{sub 2}-based Flux A (CaO/SiO{sub 2} 0.62, Al{sub 2}O{sub 3} 2 mass pct) is weaker than that of CaO-Al{sub 2}O{sub 3}-based Flux B (CaO/SiO{sub 2} 4.11, Al{sub 2}O{sub 3} 31.9 mass pct) because of its higher initial crystallization temperature. The crystallization kinetics of Flux A was “surface nucleation and growth, interface reaction control” in the overall non-isothermal crystallization process, whereas that of Flux B was “constant nucleation rate, 1-dimensional growth, diffusion control, in the primary crystallization stage, and then transformed into constant nucleation rate, 3-dimensional growth, interface reaction control in the secondary crystallization stage.” The energy dispersive spectroscopy results for Flux B suggested that the variations in the crystallization kinetics for Flux B are due to different crystals precipitating in the primary (BaCa{sub 2}Al{sub 8}O{sub 15}) and secondary (CaAl{sub 2}O{sub 4}) crystallization periods during the non-isothermal crystallization process.

36 MATERIALS SCIENCE↗

Comparison of gasification kinetics parameters of different types of nuclear graphite

A chemical-reaction kinetics model of nuclear graphite gasification has recently been developed and successfully validated with gasification rate measurements for nuclear graphite grades of IG-110, IG-430, NBG-18 and NBG-25. The model employs 4 elementary chemical reactions with applicable parameters, including the values and Gaussian-like distributions of the specific activation energies, the pre-exponential coefficients for adsorption of oxygen and desorption of CO and CO{sub 2} gases, and the surface area of free active sites. These parameters are determined from the reported measurements of the total gasification and transient weight loss using a multi-parameter optimization algorithm. The determined chemical kinetics parameters for IG-100 and NB-25 are nearly the same, but slightly different from those for NBG-18 and IG-430. The initial specific area of free active sites is inversely proportional to the square root of the mass or volume of the graphite specimens used in experiments. The recommended chemical kinetics parameters in this paper for these grades of nuclear graphite should be applicable to future safety analysis of high-temperature gas cooled reactors in the unlikely event of a massive air ingress accident. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Isopentane Disproportionation in Lewis Acidic Chloroaluminate Ionic Liquid

Lewis acidic chloroaluminate ionic liquid diluted in dichloromethane catalyzes the disproportionation of alkanes, such as isopentane, via carbenium ions in a reaction readily initiated by carbenium ion precursors such as tert-butyl chloride (TBC). The carbenium ion-AlCl 4 – ion-pairs stabilized by the ionic liquid-dichloromethane solution are the key intermediates in two distinctive kinetic regimes, i.e., a transient regime (0–5 min) and a steady-state regime (after 5 min). The transient regime constitutes the majority of isopentane conversion and is governed by the initial carbenium ion concentration. In the steady-state regime, disproportionation occurs at a considerably lower rate, affected by the carbenium ion concentration, the concentration of the ionic liquid, and the reaction temperature. The formation of alkenes observed in the 1 H NMR spectra of the reacting substrates, along with the DFT calculations, suggests that deprotonation of carbenium ion-pairs reduces their concentration, decreasing, in turn, the reaction rate. Kinetic modeling indicates that the transient regime is significantly controlled by the hydride transfer (k HT ) and the deprotonation rate constants (k DP ), while the steady-state regime is additionally influenced by the alkene protonation rate constant (k –DP ). The overall activation energy of the reaction at the steady state, expressed as E a,steady-state regime = E a,HT – E a,DP + E a,–DP , was 54 kJ/mol. The reaction mechanism and the kinetics highlight the potential of Lewis acid-catalyzed conversions of hydrocarbons under remarkably mild conditions.

Deprotonation↗

Hydrophobic pockets built in polymer micelles enhance the reactivity of Cu 2+ ions

We report the hydrophobicity-enhanced reactivity of Cu2+ ions as an ester hydrolase. Using a dipicolylamine (DPA) containing reversible addition–fragmentation chain transfer agent, the synthetic sequence, either hydrophobic or hydrophilic first in amphiphilic block copolymers of polystyrene-block-poly(N'N-dimethylacrylamide) (PS-b-PDMA), was varied to control the location of the binding motif, DPA, in the hydrophobic core or on the hydrated corona of polymer micelles. The hydrophobicity of Cu 2+ sites showed a significant impact (as large as 60 times more activity) on their catalytic efficiency towards ester hydrolase. With two different kinetic modes, including Michaelis–Menten and the reverse saturation kinetics models, the binding constant Kb of the substrates to Cu 2+ sites were quantitatively analyzed and we demonstrate that hydrophobicity favors the binding of the substrates to Cu2+ sites at polymer micelles with smaller sizes, however, K b decays exponentially with micellar diameters. Despite the diffusion barrier, hydrophobicity shows a profound impact on the catalytic rate constant kc that measures the single conversion rate of bound substrates to products. There is a 16–20 times kinetic enhancement in the hydrolase activity, completely endowed by the hydrophobic microenvironment of Cu 2+ sites compared to micelles with similar sizes. Our results indicate how the hydrophobicity of Cu 2+ -containing micelles can impact the catalytic efficiency and potentially illustrate a promising way toward the design of bioinspired catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development of a Reduced-Order Model for Reacting Gas-Solids Flow using Proper Orthogonal Decomposition

This report summarizes the objectives, tasks and accomplishments made during the three year duration of this research project. The report presents the results obtained by applying advanced computational techniques to develop reduced-order models (ROMs) in the case of reacting multiphase flows based on high fidelity numerical simulation of gas-solids flow structures in risers and vertical columns obtained by the Multiphase Flow with Interphase eXchanges (MFIX) software. The research includes a numerical investigation of reacting and non-reacting gas-solids flow systems and computational analysis that will involve model development to accelerate the scale-up process for the design of fluidization systems by providing accurate solutions that match the full-scale models. The computational work contributes to the development of a methodology for obtaining ROMs that is applicable to the system of gas-solid flows. Finally, the validity of the developed ROMs is evaluated by comparing the results against those obtained using the MFIX code. Additionally, the robustness of existing POD-based ROMs for multiphase flows is improved by avoiding non-physical solutions of the gas void fraction and ensuring that the reduced kinetics models used for reactive flows in fluidized beds are thermodynamically consistent.

42 ENGINEERING↗

Tutorial: Understanding residual stress in polycrystalline thin films through real-time measurements and physical models

Residual stress is a long-standing issue in thin film growth. Better understanding and control of film stress would lead to enhanced performance and reduced failures. In this work, we review how thin film stress is measured and interpreted. The results are used to describe a comprehensive picture that is emerging of what controls stress evolution. Examples from multiple studies are discussed to illustrate how the stress depends on key parameters (e.g., growth rate, material type, temperature, grain size, morphology, etc.). The corresponding stress-generating mechanisms that have been proposed to explain the data are also described. To develop a fuller understanding, we consider the kinetic factors that determine how much each of these processes contributes to the overall stress under different conditions. This leads to a kinetic model that can predict the dependence of the stress on multiple parameters. The model results are compared with the experiments to show how this approach can explain many features of stress evolution.

Chason, Eric↗

Computational Investigation of the Pyrolysis Product Selectivity for α-Hydroxy Phenethyl Phenyl Ether and Phenethyl Phenyl Ether: Analysis of Substituent Effects and Reactant Conformer Selection

Using computational methods, we determine product selectivities for the pyrolysis of two model compounds for the β-O-4 linkage in lignin: phenethyl phenyl ether (PPE) and α-hydroxy phenethyl phenyl ether (α-hydroxy PPE). We investigate the dependence of the product selectivities on the number of reactant conformers included. Utilizing density functional theory in combination with transition state theory, we obtain rate constants for hydrogen abstraction reactions by the key chain-carrying radicals, which determine the product selectivity within a steady-state kinetic model. The inclusion of the energetically second lowest reactant conformer of PPE and α-hydroxy PPE has a large effect on the product selectivity. The final product selectivity computed for PPE agrees well with experiment. We find that the α-hydroxy substituent affects energetic as well as entropic contributions to the rate constant differently for alternative pathways of hydrogen abstraction and, thereby, significantly alters product distributions.

Chemistry↗

Computational Investigation of the Pyrolysis Product Selectivity for alpha-Hydroxy Phenethyl Phenyl Ether and Phenethyl Phenyl Ether: Analysis of Substituent Effects and Reactant Conformer Selection

Using computational methods, we determine product selectivities for the pyrolysis of two model compounds for the beta-O-4 linkage in lignin: phenethyl phenyl ether (PPE) and alpha-hydroxy phenethyl phenyl ether (alpha-hydroxy PPE). We investigate the dependence of the product selectivities on the number of reactant conformers included. Utilizing density functional theory in combination with transition state theory, we obtain rate constants for hydrogen abstraction reactions by the key chain-carrying radicals, which determine the product selectivity within a steady-state kinetic model. The inclusion of the energetically second lowest reactant conformer of PPE and alpha-hydroxy PPE has a large effect on the product selectivity. The final product selectivity computed for PPE agrees well with experiment. We find that the alpha-hydroxy substituent affects energetic as well as entropic contributions to the rate constant differently for alternative pathways of hydrogen abstraction and, thereby, significantly alters product distributions.

Beste, Ariana↗

Experimental Study of Gas-Hydrate Dissociation Kinetics at Constant Temperatures Above 0°C

Recently, gas-hydrate storage technology has been drawing increasing attention as a new means of gas storage and transportation and may in the future become the optimal means of gas storage as compared with LNG technology because of its economic and safety advantages. The main purpose of the present work was to investigate experimentally the hydrate dissociation mechanism using a kinetic model at different temperatures and atmospheric pressure in the range 5-15°C. The obtained results have great significance for gas-hydrate storage technology and its application in industry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗