Search NASA⌕ Search

SEARCH · Search NASA

Results for “MITIGATION STRATEGIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

2D material-based layer transfer: Challenges and opportunities

For future of electronics such as bioelectronics, 3D integrated electronics, and bendable electronics, needs for flexibility and stackability of electronic products have substantially grown up. However, conventional wafer-based single-crystalline semiconductors cannot catch up with such trends because they are bound to the thick rigid wafers such that they are neither flexible nor stackable. Although polymer-based organic electronic materials are more compatible as they are mechanically complaint and less costly than inorganic counterparts, their electronic/photonic performance is substantially inferior to that of single-crystalline inorganic materials. For the past few decades, many different strategies to mitigate such performance-mechanical compliance dilemma by developing methods to obtain cheap, flexible, stackable, single-crystalline inorganic systems. In today’s talk, I will discuss about various strategies to realize such a dream electronic system and how these strategies unlock new ways of manufacturing advanced electronic systems. One of the most promising approaches is to fabricate freestanding ultrathin membranes from existing functional material wafers by peeling the active layers from the top. I will overview all freestanding membrane methods and especially dive deeply into 2D materials-based layer transfer (2DLT) technique that has been recently emerging as one of the very promising options. In the 2DLT process, one can produce single-crystalline freestanding membranes from 3D materials by performing remote epitaxy or van der Waals epitaxy on 2D materials followed by peeling active single-crystalline films from the 2D materials. I will discuss about the challenges and opportunities of this technology. In addition, I will present unprecedented artificial heterostructures that can be enabled by stacking those freestanding 3D material membranes.

Kim, Jeehwan↗
DOE OSTI2022

Two-dimensional material based layer transfer: challenges and opportunities

For future of electronics such as bioelectronics, 3D integrated electronics, and bendable electronics, needs for flexibility and stackability of electronic products have substantially grown up. However, conventional wafer-based single-crystalline semiconductors cannot catch up with such trends because they are bound to the thick rigid wafers such that they are neither flexible nor stackable. Although polymer-based organic electronic materials are more compatible as they are mechanically complaint and less costly than inorganic counterparts, their electronic/photonic performance is substantially inferior to that of single-crystalline inorganic materials. For the past few decades, many different strategies to mitigate such performance-mechanical compliance dilemma by developing methods to obtain cheap, flexible, stackable, single-crystalline inorganic systems. In today’s talk, I will discuss about various strategies to realize such a dream electronic system and how these strategies unlock new ways of manufacturing advanced electronic systems. One of the most promising approaches is to fabricate freestanding ultrathin membranes from existing functional material wafers by peeling the active layers from the top. I will overview all freestanding membrane methods and especially dive deeply into 2D materials-based layer transfer (2DLT) technique that has been recently emerging as one of the very promising options. In the 2DLT process, one can produce single-crystalline freestanding membranes from 3D materials by performing remote epitaxy or van der Waals epitaxy on 2D materials followed by peeling active single-crystalline films from the 2D materials. I will discuss about the challenges and opportunities of this technology. In addition, I will present unprecedented artificial heterostructures that can be enabled by stacking those freestanding 3D material membranes.

KIM, JEEHWAN↗
DOE OSTI2024

Suppressing metal corrosion through identification of optimal crystallographic plane for Zn batteries

Direct use of metals as battery anodes could significantly boost the energy density, but suffers from limited cycling. To make the batteries more sustainable, one strategy is mitigating the propensity for metals to form random morphology during plating through orientation regulation, e.g., hexagonal Zn platelets locked horizontally by epitaxial electrodeposition or vertically aligned through Zn/electrolyte interface modulation. Current strategies center around obtaining (002) faceted deposition due to its minimum surface energy. Here, benefiting from the capability of preparing a library of faceted monocrystalline Zn anodes and controlling the orientation of Zn platelet deposits, we challenge this conventional belief. We show that while monocrystalline (002) faceted Zn electrode with horizontal epitaxy indeed promises the highest critical current density, the (100) faceted electrode with vertically aligned deposits is the most important one in suppressing Zn metal corrosion and promising the best reversibility. Such uniqueness results from the lowest electrochemical surface area of (100) faceted electrode, which intrinsically builds upon the surface atom diffusion barrier and the orientation of the pallets. These new findings based on monocrystalline anodes advance the fundamental understanding of electrodeposition process for sustainable metal batteries and provide a paradigm to explore the processing–structure–property relationships of metal electrodes.

25 ENERGY STORAGE↗
DOE OSTI2020

Resiliency-based restoration optimization for dependent network systems against cascading failures

Due to the increasing importance of large-scale and complex network systems and the potential for massive cascading failures in these real-world systems, modeling of system resiliency and optimization of restoration strategies to mitigate system performance loss caused by diverse disruptions is of significant interest among researchers and practitioners. Although society has experienced many incidents that demonstrate the influence of cascading failures aggravated by dependencies inside network systems, existing resiliency-based restoration optimization research rarely if ever jointly considers the impact of system dependencies on cascading failures. In this paper, different restoration prioritization strategies are applied to network systems subject to cascading failures that take into account system dependencies. By conducting case studies on synthetic networks and the U.S. airport network system, the effects of restoration strategies are evaluated using a system resiliency metric and two system performance measurements. Furthermore, the influence of system dependency characteristics and the interplay between them and restoration strategies on system resiliency regarding cascading failures are also investigated. This work demonstrates the distinct effects of restoration prioritization actions against cascading failures to mitigate the performance loss in network systems with different properties. It also provides insights about restoration improvement by considering dependency impacts to effectively reduce the intensity and extent of cascading failures.

42 ENGINEERING↗
DOE OSTI2023

GaAs solar cells grown on acoustically spalled GaAs substrates with 27% efficiency

Acoustic spalling presents a potentially low-cost reuse pathway for III–V epitaxial growth substrates via exfoliation of device layers with recovery and reuse of the substrate. However, surface features formed during spalling can reduce the performance of subsequently grown devices. Here, we develop an understanding of how the surface morphology of acoustically spalled substrates affects GaAs solar cell performance and develop strategies to mitigate these impacts. We demonstrate that minor planarization of the surface by wet chemical etching and/or epitaxial growth, or the redesign of the device structure to thicken critical layers, prevents performance degradation. Using these strategies, we demonstrate a 0.25 cm 2 single-junction GaAs device with 26.9% ± 0.2% photovoltaic conversion efficiency under the AM1.5G spectrum grown on an acoustically spalled substrate. These results enable the growth of high-performance III–V devices on non-traditional substrates with the potential for significantly reduced device costs.

14 SOLAR ENERGY↗
DOE OSTI2026

Quantitative Evaluation of Potassium Iodide Implementation Strategies for Emergency Preparedness and Response

This study evaluates the effectiveness of potassium iodide (KI) distribution strategies in mitigating exposure to radioiodine during severe nuclear power plant accidents. This analysis quantitatively compares various KI distribution methods (pre-distributed versus stockpiles), including scenarios with and without KI administration. The results indicate that differences in distribution strategies impact the projected thyroid dose by at least an order of magnitude. The results also indicate that the timing of KI administration is critical, as expected. For scenarios involving delayed releases of significant quantities of radionuclides, evacuation is the most effective protection strategy regardless of KI distribution method. For scenarios involving rapid releases, retrieving KI from stockpiles can have a detrimental effect. Pre-distributed KI is potentially the most effective approach when used as a supplement to evacuation and sheltering. However, these model results are based on idealized conditions for KI distribution and administration; the actual benefits of KI prophylaxis are likely to be less than estimated in this report due to many variables. The results highlight the importance of considering the cost and rigor of different distribution programs and public compliance with emergency instructions. This report includes suggested research to explore KI distribution plans for advanced reactors.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRSDate not supplied

Understanding the Impact of Unobservable Variables on the Performance of Predictive Models: The Need for Feature Space Partitioning and Fusion

When developing predictive models over a dataset, the model is globally optimized across the entire feature space to learn a decision boundary. However, when unobservable variables—which cannot be measured or estimated—interact with the observable variables, this can negatively impact the optimization applied to the decision boundary since the data samples introduced by unobservable variables may have little to no association with the applied global optimization. This, consequently, penalizes the entire decision boundary and model performance. This paper examines some of the detrimental effects of unobservable variables, particularly their role in creating new modes in the distribution of observable variables and reducing the separability of class distributions. Such challenges result in skewed or warped decision boundaries and decreased accuracy of model predictions, particularly for interpretable models like logistic regression and decision trees. Through two illustrative case examples, we highlight the need to address the challenges imposed by unobservable variables. We propose a strategy to mitigate these challenges by creating local regions within the feature space through partitioning. This enables the optimization of local models within the regions to overcome the impact of unobservability in different feature space localities. Research into a more sophisticated partitioning strategy and where the partition should be relative to the sample of interest is left as future work. Through the analysis of the impact of unobservability and the development of a partitioning method, we demonstrate the clear need for a partitioning strategy that integrates knowledge from multiple local models to estimate risk factors using information fusion. Thus, we establish the foundation and motivation for using partitioning and information fusion to overcome the effects of unobservability in predictive models. Formal fusion methods, such as Dempster-Shafer theory, can better leverage the information from local regions to improve the performance of interpretable predictive models in the presence of unobservable variables.

Time Series Data↗
DOE OSTI2024

Moisture Performance of Unvented Attics With Vapor Diffusion Ports and Buried Ducts in Hot, Humid Climates

Energy efficiency measures, such as cool roofs, radiant barriers, interior radiative control coatings, and buried ducts are increasing in popularity and are promoted by energy codes because of their energy-saving potential. However, these strategies can also pose moisture risks in attics by lowering surface temperatures and increasing condensation potential and moisture accumulation. Of particular concern in hot-humid climates is dripping condensation on cold air-conditioning ductwork in the summer - commonly referred to as duct "sweating" - which threatens the attic floor with conditions conducive to mold growth and rot. One strategy to mitigate these moisture issues is to wrap ductwork in thicker duct-wrap insulation with an integrated exterior vapor barrier, but thick duct wrap can be difficult to come by, expensive, and unwieldy to work with. This study explores an alternative strategy of reducing moisture issues while embracing energy efficiency by using unvented attics with vapor diffusion ports and buried ductwork in hot-humid climates. Vapor diffusion ports have been studied so far in a wide range of U.S. climates, mostly in the context of conditioned attics. In this study, the strategy is implemented in the novel context of hot-humid climates with ductwork sitting atop blown-in attic floor insulation in unconditioned attics. Using a combination of field experiments and hygrothermal modeling, the findings of this project indicate that an unvented attic with vapor diffusion ports and buried ducts may be a key part of a successful low-cost method for reducing the attic moisture load by venting excess moisture out of the attic, keeping duct-jacket surfaces above dew point temperature, and keeping the roof deck safe from winter moisture accumulation.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

Comparative analysis of various pretreatments to mitigate fouling and scaling in membrane distillation

Membrane distillation (MD) has shown strong promise for treating hypersaline produced water (PW) streams. Scaling and fouling on the membrane surface, however, have been identified as major challenges for commercialization and widespread application. The focus of this study was to first identify the nature of foulants and scalants on the membrane surface and then investigate the pretreatment strategies that mitigate the extent of fouling and scaling on the membrane surface. Vacuum MD (VMD) was selected for this study because of its higher flux at more moderate feed temperatures that eventually leads better assessment of fouling and scaling on the membrane surface. VMD flux tests were carried out with three different real PW samples at total dissolved solids concentrations in the range of 120-160 g/L. It was found that an efficient pretreatment prior to MD is required to mitigate the fouling potential of the organic matter, mostly suspended constituents, in PW samples. Suspended organics fouled and quickly wetted the MD membrane. Major conventional treatments, including filtration, oxidation, coagulation, air floatation, and aeration were investigated to pretreat the PW before VMD tests. A comprehensive comparative analysis is presented showing that the ultrafiltration and coagulation pretreatments displayed the best performance in mitigating the fouling and scaling, while oxidative pretreatment was found to be effective in reducing the iron concentration to less than 5 ppm. The surface of scaled membranes was carefully characterized to further evaluate the performance of each pretreatment. The components that had the highest tendency to precipitate on the membrane surface were identified as strontium sulfate, calcium carbonate, sodium chloride, iron oxide, and silica. In closing, these findings are supported by thermodynamic estimation of the saturation index.

42 ENGINEERING↗
DOE OSTI2017

DNA-SIP based genome-centric metagenomics identifies key long-chain fatty acid-degrading populations in anaerobic digesters with different feeding frequencies

Fats, oils and greases (FOG) are energy-dense wastes that can be added to anaerobic digesters to substantially increase biomethane recovery via their conversion through long-chain fatty acids (LCFAs). However, a better understanding of the ecophysiology of syntrophic LCFA-degrading microbial communities in anaerobic digesters is needed to develop operating strategies that mitigate inhibitory LCFA accumulation from FOG. In this research, DNA stable isotope probing (SIP) was coupled with metagenomic sequencing for a genome-centric comparison of oleate (C18:1)-degrading populations in two anaerobic codigesters operated with either a pulse feeding or continuous-feeding strategy. The pulse-fed codigester microcosms converted oleate into methane at over 20% higher rates than the continuous-fed codigester microcosms. Differential coverage binning was demonstrated for the first time to recover population genome bins (GBs) from DNA-SIP metagenomes. About 70% of the 13C-enriched GBs were taxonomically assigned to the Syntrophomonas genus, thus substantiating the importance of Syntrophomonas species to LCFA degradation in anaerobic digesters. Phylogenetic comparisons of 13C-enriched GBs showed that phylogenetically distinct Syntrophomonas GBs were unique to each codigester. Overall, these results suggest that syntrophic populations in anaerobic digesters can have different adaptive capacities, and that selection for divergent populations may be achieved by adjusting reactor operating conditions to maximize biomethane recovery.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

Pathways for mitigating thermal losses in solar photovoltaics

Abstract To improve the performance of solar photovoltaic devices one should mitigate three types of losses: optical, electrical and thermal. However, further reducing the optical and electrical losses in modern photovoltaic devices is becoming increasingly costly. Therefore, there is a rising interest in minimizing the thermal losses. These correspond to the reduction in electrical power output resultant of working at temperatures above 25 °C and the associated accelerated aging. Here, we quantify the impact of all possible strategies to mitigate thermal losses in the case of the mainstream crystalline silicon technology. Results indicate that ensuring a minimum level of conductive/convective cooling capabilities is essential. We show that sub-bandgap reflection and radiative cooling are strategies worth pursuing and recommend further field testing in real-time operating conditions. The general method we propose is suitable for every photovoltaic technology to guide the research focused on reducing thermal losses.

14 SOLAR ENERGY↗
DOE OSTI2024

Physics-informed heterogeneous graph neural networks for DC blocker placement

The threat of geomagnetic disturbances (GMDs) to the reliable operation of the bulk energy system has spurred the development of effective strategies for mitigating their impacts. One such approach involves placing transformer neutral blocking devices, which interrupt the path of geomagnetically induced currents (GICs) to limit their impact. The high cost of these devices and the sparsity of transformers that experience high GICs during GMD events, however, calls for a sparse placement strategy that involves high computational cost. To address this challenge, we developed a physics-informed heterogeneous graph neural network (PIHGNN) for solving the graph-based dc-blocker placement problem. Our approach combines a heterogeneous graph neural network (HGNN) with a physics-informed neural network (PINN) to capture the diverse types of nodes and edges in ac/dc networks and incorporates the physical laws of the power grid. We train the PIHGNN model using a surrogate power flow model and validate it using case studies. Results demonstrate that PIHGNN can effectively and efficiently support the deployment of GIC dc-current blockers, ensuring the continued supply of electricity to meet societal demands. Furthermore, our approach has the potential to contribute to the development of more reliable and resilient power grids capable of withstanding the growing threat that GMDs pose.

24 POWER TRANSMISSION AND DISTRIBUTION↗
NASA NTRS2015

Preface

The potential effects of climate change on the food production system are raising concern both globally and regionally. The system is already challenged to deliver sufficient and healthy sustenance to all people, and is certain to be even further challenged as world population grows and price shocks loom. The prospect of climate change intensifies these challenges, raising the risk that more frequent and intense extreme weather events threaten the stability of agricultural production in regions around the globe. This two-part set is an important contribution to the ongoing Imperial College Press (ICP) Series on Climate Change Impacts, Adaptation, and Mitigation. This series aims to provide the know ledge base necessary for understanding and responding to climate change, in both its current form and future manifestations. In these volumes, ·leading agricultural researchers have come together to contribute their expertise on actual and potential climate change impacts, adaptation strategies, and mitigation efforts. This ongoing series is jointly published by The American Society of Agronomy (ASA), Crop Science Society of America (CSSA), and Soil Science Society of America (SSSA), together with ICP. We hope that this fruitful cooperation will continue for many years to come, as it spurs the global effort to define and meet the great food security and climate change challenges of our time.

farmlands↗
DOE OSTI2021

Mitigating ion migration in perovskite solar cells

The intrinsic ion migration in the metal halide perovskite absorber layer and its interfaces seriously limits the device stability of perovskite solar cells (PSCs). Despite considerable efforts to mitigate the ion migration issue, it remains a formidable challenge in the commercialization of PSCs. In this paper, we provide a short review of the device failure mechanisms induced by intrinsic ion migration and discuss the detrimental effects of ion migration on different component layers of PSCs. We outline the corresponding strategies to mitigate ion migration in PSCs and provide an insight on materials engineering to attain long-term stabilized perovskite photovoltaics.

14 SOLAR ENERGY↗
NASA NTRS2004

Research and Development in Optical Communications

A report in the form of lecture slides summarizes the optical-communications program of NASA s Jet Propulsion Laboratory (JPL) and describes the JPL Optical Communications Telescope Laboratory (OCTL) and its role in the program. The purpose of the program is to develop equipment and techniques for laser communication between (1) ground stations and (2) spacecraft (both near Earth and in deep space) and aircraft. The OCTL is an astronomical- style telescope facility that includes a 1-m-diameter, 75.8-m-focal length telescope in an elevation/azimuth mount, plus optical and electronic subsystems for tracking spacecraft and aircraft, receiving laser signals from such moving targets, and transmitting high-power laser signals to such targets. Near-term research at the OCTL is expected to focus on mitigating the effects of atmospheric scintillation on uplinks and on beacon-assisted tracking of ground stations by stations in deep space. Near-term experiments are expected to be performed with retroreflector-equipped aircraft and Earth-orbiting spacecraft techniques to test mathematical models of propagation of laser beams, multiple-beam strategies to mitigate uplink scintillation, and pointing and tracking accuracy of the telescope.

Wilson, Keith↗
DOE OSTI2025

Evaluation of microalgae cultivation at air-CO 2 equilibrium pH for improving carbon utilization efficiency

Microalgae are often cultivated at near-neutral pH to optimize growth. However, this results in significant CO 2 loss through outgassing in open-pond cultivation systems, leading to low CO 2 utilization efficiency and higher biomass production costs. One potential solution is algal cultivation at air-CO 2 equilibrium pH, which minimizes CO 2 outgassing but may inhibit growth due to stresses at higher pH levels. In this study, we evaluated the viability of this approach by growing Picochlorum celeri and Tetraselmis striata under outdoor relevant conditions at equilibrium pH. Compared to pH 7 cultures, biomass productivity declined by 35 % for P. celeri and 57 % for T. striata. Although CO 2 outgassing could be minimized, the significant loss in productivity led to a higher overall minimum biomass selling price (MBSP). Increased ammonia toxicity at the higher pH was found to be one of the growth-limiting factors and was mitigated by reducing ammonium fertilizer concentration. This adjustment resulted in a more moderate productivity decline of 13 % (instead of 35 %) for T. striata, and consequently, a lower MBSP was achieved. These findings suggest that equilibrium pH cultivation may be a viable method for reducing CO 2 loss without significantly compromising biomass productivity. Depending on the strain, strategies to mitigate stressors, such as ammonia toxicity, may be necessary.

09 BIOMASS FUELS↗
DOE OSTI2020

Parameterizing Perennial Bioenergy Crops in Version 5 of the Community Land Model Based on Site‐Level Observations in the Central Midwestern United States

Abstract With projected expansion of biofuel production at a global scale, there is a pressing need to develop adequate representation of bioenergy crops in land surface models to help effectively quantify the biogeophysical and biogeochemical effects of its associated land use changes. This study implements two new perennial bioenergy crops, Miscanthus and switchgrass, into the Community Land Model Version 5 based on site‐level observations from the midwestern United States by modifying parameters associated with photosynthesis, phenology, allocation, decomposition, and carbon cost of nitrogen uptake and integrating concomitantly land management practices. Sensitivity analyses indicate that carbon and energy fluxes of the perennial crops are most sensitive to photosynthesis and phenology parameters. Validation of simulated fluxes against site‐level measurements demonstrates that the model is capable of capturing the overall patterns of energy and carbon fluxes, as well as physiological transitions from leaf emergence to senescence. Compared to annual crops, perennial crops feature longer growing season, greater leaf areas, and higher productivity, leading to increased transpiration, lower annual runoff, and larger carbon uptake. The model simulations suggest that with higher CO 2 assimilation rates and lower demands for nutrients and water, high‐yielding perennial crops are promising alternatives of bioenergy feedstocks compared to traditional annual crops not only for mitigating climate change but also for environmental conservation purposes by reducing fertilizer application and therefore alleviating surface‐ and ground‐water contaminations. Although the local‐scale simulations shed light on potential benefits of using perennial grasses as bioenergy feedstocks, quantifying consequences of their plantations at larger scales warrants additional investigation.

Cheng, Yanyan↗