Search NASA⌕ Search

SEARCH · Search NASA

Results for “MONOCRYSTALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Cerocene Revisited: The Electronic Structure of and Interconversion Between Ce2(C8H8)3 and Ce(C8H8)2

New synthetic procedures for the preparation of Ce(cot)2, cerocene, from [Li(thf)4][Ce(cot)2], and Ce2(cot)3 in high yield and purity are reported. Heating solid Ce(cot)2 yields Ce2(cot)3 and COT while heating Ce2(cot)3 with an excess of COT in C6D6 to 65oC over four months yields Ce(cot)2. The solid state magnetic susceptibility of these three organocerium compounds shows that Ce(cot)2 behaves as a TIP (temperature independent paramagnet) over the temperature range of 5-300 K, while that of Ce2(cot)3 shows that the spin carriers are antiferromagnetically coupled below 10 K; above 10 K, the individual spins are uncorrelated, and [Ce(cot)2]- behaves as an isolated f1 paramagnet. The EPR at 1.5K for Ce2(cot)3 and [Ce(cot)2]- have ground state of MJ= +- 1/2. The LIII edge XANES of Ce(cot)2 (Booth, C.H.; Walter, M.D.; Daniel, M.; Lukens, W.W., Andersen, R.A., Phys. Rev. Lett. 2005, 95, 267202) and 2Ce2(cot)3 over 30-500 K are reported; the Ce(cot)2 XANES spectra show Ce(III) and Ce(IV) signatures up to a temperature of approximately 500 K, whereupon the Ce(IV) signature disappears, consistent with the thermal behavior observed in the melting experiment. The EXAFS of Ce(cot)2 and Ce2(cot)3 are reported at 30 K; the agreement between the molecular parameters for Ce(cot)2 derived from EXAFS and single crystal X-ray diffraction data are excellent. In the case of Ce2(cot)3 no X-ray diffraction data are known to exist, but the EXAFS are consistent with a"triple-decker" sandwich structure. A molecular rationalization is presented for the electronic structure of cerocene having a multiconfiguration ground state that is an admixture of the two configurations Ce(III, 4f1)(cot1.5-)2 and Ce(IV, 4f0)(cot2-)2; the multiconfigurational ground state has profound effects on the magnetic properties and on the nature of the chemical bond in cerocene and, perhaps, other molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Robust isothermal electric control of exchange bias at room temperature

Voltage-controlled spin electronics is crucial for continued progress in information technology. It aims at reduced power consumption, increased integration density and enhanced functionality where non-volatile memory is combined with high-speed logical processing. Promising spintronic device concepts use the electric control of interface and surface magnetization. From the combination of magnetometry, spin-polarized photoemission spectroscopy, symmetry arguments and first-principles calculations, we show that the (0001) surface of magnetoelectric Cr{sub 2}O{sub 3} has a roughness-insensitive, electrically switchable magnetization. Using a ferromagnetic Pd/Co multilayer deposited on the (0001) surface of a Cr{sub 2}O{sub 3} single crystal, we achieve reversible, room-temperature isothermal switching of the exchange-bias field between positive and negative values by reversing the electric field while maintaining a permanent magnetic field. This effect reflects the switching of the bulk antiferromagnetic domain state and the interface magnetization coupled to it. The switchable exchange bias sets in exactly at the bulk Neel temperature.

36 MATERIALS SCIENCE↗

Lensless x-ray imaging in reflection geometry

Lensless X-ray imaging techniques such as coherent diffraction imaging and ptychography, and Fourier transform holography can provide time-resolved, diffraction-limited images. Nearly all examples of these techniques have focused on transmission geometry, restricting the samples and reciprocal spaces that can be investigated. We report a lensless X-ray technique developed for imaging in Bragg and small-angle scattering geometries, which may also find application in transmission geometries. We demonstrate this by imaging a nanofabricated pseudorandom binary structure in small-angle reflection geometry. The technique can be used with extended objects, places no restriction on sample size, and requires no additional sample masking. The realization of X-ray lensless imaging in reflection geometry opens up the possibility of single-shot imaging of surfaces in thin films, buried interfaces in magnetic multilayers, organic photovoltaic and field-effect transistor devices, or Bragg planes in a single crystal.

36 MATERIALS SCIENCE↗

Electronic correlations in the ironpnictides

In correlated metals derived from Mott insulators, the motion of an electron is impeded by Coulomb repulsion due to other electrons. This phenomenon causes a substantial reduction in the electron's kinetic energy, leading to remarkable experimental manifestations in optical spectroscopy. The high-transition-temperature (Tc) superconducting cuprates are perhaps the most studied examples of such correlated metals. The occurrence of high-Tc superconductivity in the iron pnictides puts a spotlight on the relevance of correlation effects in these materials. Here, we present an infrared and optical study on single crystals of the iron pnictide superconductor LaFePO. We find clear evidence of electronic correlations in metallic LaFePO with the kinetic energy of the electrons reduced to half of that predicted by band theory of nearly free electrons. We deduce that electronic many-body effects are important in the iron pnictides despite the absence of a Mott transition.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Synthesis and lanthanide coordination chemistry of trifluoromethyl derivatives of phosphinoylmethyl pyridine N-oxides

A synthetic route for the formation of 2-[bis-(2-trifluoromethyl-phenyl)-phosphinoylmethyl]-pyridine N-oxide (1c) and 2-[bis-(3,5-trifluoromethyl-phenyl)-phosphinoylmethyl]-pyridine N-oxide (1d) was developed and the new ligands characterized by spectroscopic methods and single crystal X-ray diffraction analyses. The coordination chemistry of the ligands was examined with early and late lanthanide ions. The molecular structure of one complex, [Yb(1c)(NO3)3(DMF)](DMF)(H2O)0.5, was determined by single crystal X-ray diffraction methods and the ligand found to coordinate in a bidentate fashion. This coordination chemistry is compared against lanthanide coordination chemistry observed for the related ligand, [Ph2P(O)CH2] C5H4NO.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Conversion of Nonporous Helical Cadmium Organic Famework to a Porous Form

Two novel cadmium–organic frameworks containing achiral multiwalled helical nanotubular channels, [Cd(HImDC)(S)]n (S = Im(1) and Py(2)), have been synthesized and characterized using single crystal X-ray diffraction, in which 1 converts to 2 upon refluxing 1 in pyridine solution with noticeable porosity and hydrogen uptake at medium pressure.

08 HYDROGEN↗

A photo-induced excited state structure of a hetero-bimetallic ionic pair complex, Nd(DMA)[subscript 4](H[subscript 2]O)[subscript 4]Fe(CN)[subscript 6]·3H[subscript 2]O, analyzed by single crystal X-ray diffraction

The excited state crystal structure of the ionic complex Nd(DMA){sub 4}(H{sub 2}O){sub 4}-Fe(CN){sub 6} {center_dot} 3H{sub 2}O (DMA = dimethylacetamide) has been determined at 15 K upon UV illumination by single crystal X-ray diffraction. Significant structural changes are observed around the Fe site in the excited state. These changes are similar to those observed for a related molecular compound exhibiting photomagnetic properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal structure and chemical bonding of the intermetallic Zintl phase Yb[subscript 11]AlSb[subscript 9]

High resolution single crystal synchrotron X-ray diffraction data measured at 15(2) K were used to solve the structure of the complex intermetallic Zintl phase, Yb{sub 11}AlSb{sub 9} (space group Iba2), made up of Yb cations and polyanions along with isolated Sb anions. The 15(2) K cell parameters are a = 11.7383(4) {angstrom}, b = 12.3600(4) {angstrom}, c = 16.6796(6) {angstrom}. The temperature dependence of the structure was investigated through high resolution synchrotron powder X-ray diffraction (PXRD) data measured from 90 K to 1000 K. Rietveld refinements of the crystal structure revealed near linear thermal expansion of Yb{sub 11}AlSb{sub 9} with expansion coefficients of 1.49(2) x 10{sup -5} K{sup -1}, 1.71(3) x 10{sup -5} K{sup -1}, 1.13(1) x 10{sup -5} K{sup -1} for a, b and c, respectively. The chemical bonding in Yb{sub 11}AlSb{sub 9} was analyzed using atomic Hirshfeld surfaces, and the analysis supports the presence of the structural elements of Yb cations, [AlSb{sub 4}]{sup 9-} tetrahedra, [Sb{sub 2}]{sup 4-} dimers and isolated Sb{sup 3-} anions. However, indications of interatomic interactions between the Zintl anions and the Yb cations were also observed.

36 MATERIALS SCIENCE↗

Pair distribution function-derived mechanism of a single-crystal to disordered to single-crystal transformation in a hemilabile metal-organic framework

Flexible metal-organic frameworks (MOFs) are materials of great current interest. A small class of MOFs show flexibility driven by reversible bonding rearrangements that lead directly to unusual properties. Cu-SIP-3 is a MOF based on the 5-sulfoisophthalate ligand, where the strong copper-carboxylate bonds ensure that the three-dimensional integrity of the structure is retained while allowing bonding changes to occur at the more weakly bonding sulfonate group leading to unusual properties such as the ultra-selective adsorption of only certain gases. While the integrity of the framework remains intact during bonding changes, crystalline order is not retained at all times during the transformations. X-Ray diffraction reveals that highly crystalline single crystals lose order during the transformation before regaining crystallinity once it is complete. Here we show how X-ray pair distribution function analysis can be used to reveal the mechanism of the transformations in Cu-SIP-3, identifying the sequence of atomic displacements that occur in the disordered phase. A similar approach reveals the underlying mechanism of Cu-SIP-3's ultra-selective gas adsorption.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Soft x-ray measurements using photoconductive type-IIa and single-crystal chemical vapor deposited diamond detectors

Photoconductive detectors (PCDs) are routinely used alongside vacuum x-ray diodes (XRDs) to provide an alternative x-ray flux measurement at laser facilities such as HELEN at AWE Aldermaston, UK, and Omega at the Laboratory for Laser Energetics. To evaluate diamond PCDs as an alternative to XRD arrays, calibration measurements made at the National Synchrotron Light Source (NSLS) at Brookhaven National Laboratory are used to accurately calculate the x-ray flux from a laser-heated target. This is compared to a flux measurement using the Dante XRD diagnostic. Estimates indicate that the photoinduced conductivity from measurements made at Omega are too large, and calculations using the radiometric calibrations made at the NSLS agree with this hypothesis. High-purity, single-crystal, chemical vapor deposited (CVD) diamond samples are compared to natural type-IIa PCDs and show promising high resistivity effects, the corollary of which preliminary results show is a slower response time.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Sensitivity of the integrating pulse magnetometer with a first-order gradiometer

Inductive magnetometers used for measurements in pulsed magnetic fields should have proper frequency characteristics. In the present work we describe the construction of an inductive magnetometer for measurements of the magnetic moment in pulsed magnetic fields, together with the calculation procedures for determination of its sensitivity. We present a method for determination of the effective coefficient of the coupling between the coils set (gradiometer) and cylindrical samples, as well as a method for calculation of the thermal noise in the measuring system. The determination of the effective coupling coefficient permits a straightforward connection of the value of the measured signal with the magnetic moment of the sample and calibration of the gradiometer in absolute units. In the work we also present, as examples, some experimental hysteresis loops of pulse magnetization measurements for some ferromagnetic samples and a single crystal of high temperature superconductor. The results were obtained using our homemade pulse magnet and magnetometer with a gradiometer designed and constructed on basis of presented here calculations.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Molecular beam epitaxy growth of wurtzite AlN nanotips

The characteristics of structure and morphology of AlN nanotips grown under higher V/III ratio on Si (111) with plasma-assisted molecular beam epitaxy are herein investigated. We found that the AlN nanotips were single crystalline with (1-211) inclined facets and embedded in pitlike defects of N-polarity. The density and size of the AlN nanotips can be controlled by the growth conditions. The AlN nanotip growth mechanism can be rationalized as the c-type dislocations generated between two adjacent grains due to the formation of higher strain area in the early stages of growth. The c-type dislocation would reverse the stacking sequence of the following adatoms, leading to the AlN nanotip growth with inverse polarity and higher growth rate compared to the surrounding matrix. These nanotips might serve as the ideal templates for further growth of nanostructure devices.

36 MATERIALS SCIENCE↗

Growth of twin-free heteroepitaxial diamond on Ir/YSZ/Si(111)

Heteroepitaxial nucleation and growth of twin-free diamond on Ir(111) is reported. The bias enhanced nucleation (BEN) technique was applied in a microwave plasma chemical vapor deposition setup to induce diamond nucleation on the new multilayer stack Ir/YSZ/Si(111). We demonstrate that the gathering of the diamond nuclei in so-called 'domains', a pattern formation process unique for diamond nucleation on iridium, is also present on Ir(111). The 1-2 nm thick carbon layer deposited by BEN does not show any crystalline diamond structures in electron diffraction and high resolution lattice imaging microscopy. In contrast, x-ray photoelectron diffraction (XPD) measurements yield C 1s diffractograms with clear threefold symmetry. The main features are comparable to measurements on diamond (111) single crystal surfaces. The weaker fine structure in the XPD patterns of the BEN layers is attributed to some disorder due to the harsh ion bombardment. However, this ion bombardment did not induce any measurable amount of twinning as deduced from the threefold symmetry. After 3 h diamond growth, the signal due to twins in the x-ray diffraction pole figures is still below the noise level of {approx}1%. Negligible twinning and the low mosaic spread of 0.96 deg. (tilt) and 1.85 deg. (twist) indicate that these films mark a breakthrough toward heteroepitaxial diamond films with (111) orientation. They provide interesting growth substrates, e.g., for phosphorous doped diamond or for the formation of heterojunction devices by deposition of wurtzite-type wide band gap semiconductor materials.

36 MATERIALS SCIENCE↗

Probing the plasma chemistry in a microwave reactor used for diamond chemical vapor deposition by cavity ring down spectroscopy

Absolute column densities of C{sub 2}(a) and CH radicals and H(n=2) atoms have been measured in a diamond growing microwave reactor operating with hydrocarbon/Ar/H{sub 2} gas mixtures as functions of height (z) above the substrate surface and process conditions. The monitored species are each localized in the hot plasma region, where T{sub gas}{approx}3000 K, and their respective column densities are each reproduced, quantitatively, by two-dimensional (r,z) modeling of the plasma chemistry. The H(n=2) distribution is seen to peak nearer the substrate, reflecting its sensitivity both to thermal chemistry (which drives the formation of ground state H atoms) and the distributions of electron density (n{sub e}) and temperature (T{sub e}). All three column densities are found to be sensitively dependent on the C/H ratio in the process gas mixture but insensitive to the particular choice of hydrocarbon (CH{sub 4} and C{sub 2}H{sub 2}). The excellent agreement between measured and predicted column densities for all three probed species, under all process conditions investigated, encourages confidence in the predicted number densities of other of the more abundant radical species adjacent to the growing diamond surface which, in turn, reinforces the view that CH{sub 3} radicals are the dominant growth species in microwave activated hydrocarbon/Ar/H{sub 2} gas mixtures used in the chemical vapor deposition of microcrystalline and single crystal diamond samples.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Patterning polycrystalline thin films by defocused ion beam: The influence of initial morphology on the evolution of self-organized nanostructures

We report on self-organized patterning of polycrystalline noble metal films, supported on dielectric substrates, by defocused Ar{sup +} ion beam irradiation. The initial surface morphology affects the formation of nanostructures, forcing the growth of ripples with a lateral periodicity imposed by the pristine polycrystalline grain distribution. At the early stages, the self-organization process is dominated by the shadowing of taller grains, while a crossover to the conventional erosive regime, observed for single crystals, sets in at longer sputtering times. The grain boundaries, although providing an additional bias for diffusion of mobile defects, do not affect the propagation of nanoscale ripples across individual grains.

36 MATERIALS SCIENCE↗

Microstructure of Cs-implanted zirconia: Role of temperature

The aim of this study was to identify experimentally the phase which includes cesium in yttria stabilized zirconia (YSZ). The solubility and retention of cesium in YSZ were studied at high temperature (HT). Cesium was ion implanted (at 300 keV) into YSZ at room temperature (RT), 750 deg. C, or 900 deg. C at fluences up to 5x10{sup 16} cm{sup -2}. The temperature dependence of the radiation-induced damage and of the cesium distribution in YSZ single crystals was investigated by Rutherford backscattering spectrometry and ion channeling. Transmission electron microscopy (TEM) studies were performed in order to determine the damage nature and search for a predicted ternary phase of cesium zirconate. Whatever the implantation temperature, the thickness of the damaged layer increases inwards with ion fluence. At RT, amorphization occurs, caused by the high Cs concentration (7 at. %). In situ TEM during postannealing shows recrystallization of cubic zirconia after release of cesium. A high implantation temperature has a significant influence on the nature of radiation defects and on the retained Cs concentration. At HT, dislocation loops and voids are formed but no amorphization is observed whereas polygonization occurs at high fluence. The implanted cesium concentration reaches a saturation value of 1.5 at. % above which Cs can no longer be retained in the matrix and is then released at the surface. At that concentration, cesium forms a solid solution in YSZ; no other phase is formed, neither during irradiation nor after thermal annealing.

36 MATERIALS SCIENCE↗

Effects of 2 mass % Si admixture in a laser-produced Fe plasma

Emission of multiply charged ions and soft x-rays from the plasmas produced by laser pulses focused on (111) surface of Fe and Fe-2 mass % Si single crystals is investigated for wavelengths of 1064 and 248 nm and intensities up to {approx_equal}1x10{sup 10} W/cm{sup 2}. It is demonstrated that the Si admixture in the Fe plasma results in a higher emission of Fe{sup q+} ions (1{<=}q{<=}4) but in a markedly lower x-ray emission. The relation of wavelengths and pulse durations of laser beams used is figured in the fluence dependence of the ion emission.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗