Search NASA⌕ Search

SEARCH · Search NASA

Results for “Object Model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Introduction to the analysis of delamination related fracture processes in composites

This research concerns the analysis and prediction of delamination damage that occurs in composite structures on the sublaminate scale - that is, the scale of individual plies or groups of plies. The objective was to develop analytical models for fixed-mode delamination in composites. These include: (1) the influence of residual thermal and moisture strains; (2) local or transverse crack tip delamination originating at the tip of transverse matrix cracks; and (3) delamination in tapered composite under tensile loading. Computer codes based on the analytical models were developed and comparisons of predictions with available experimental and analytical results in the literature were performed.

Armanios, Erian A.↗

The formation of low-mass stars

Visible to millimeter wavelength observations of the global and individual aspects of low-mass star formation are discussed. Infrared and millimeter-wave techniques reveal large collections of dust-embedded young stellar objects associated with the densest regions of molecular clouds. Special attention is given to studies of the Taurus-Auriga and Rho Opiuchi molecular cloud complexes. Properties such as the bolometric luminosities and evolutionary states of young objects can be determined by modeling the 1-100-micron spectral energy distributions.

Wilking, Bruce A.↗

Probabilistic Determination Of Motions Of Robots

Heuristic-path-planner method reduces computing time. Probability of successful motion of robot through region of space obtained from geometric model and captures effects of objects in region and kinematics of robot arm. Information used to guide on-line search and results, in most cases, in successful determination of path within reasonably short time.

Balaram, J.↗

JPL reuse program

The goal of the JPL reuse activity is to develop a quantitative understanding of the factors which encourage or inhibit software reuse, and of productivity improvements achievable through reuse. The primary activity is the measurement of parameters relevant to reuse in the environment of actual projects. The program has three objectives: (1) to develop a model to allow assessment of competing reuse techniques, (2) to extend reuse from the unit to the sub-system level, and (3) to expand from specific applications to a broader application domain. Application domains, which apply to all interplanetary projects, include Mission Operations, Science Information Systems, Flight Software, and Simulations. The program is targeting all phases and activities of the life cycle and a full range of software products. The approach will be both experimental (observe, hypothesize and evaluate) and constructive (introduce new tools and techniques). The primary target projects are Deep Space Network activities - the Ground Facilities facility upgrade, the Network Operations Control Center upgrade, and the Signal Processing Center. This is the first group of closely related projects being done in Ada at JPL. A reuse base will be developed initially by classifying potentially reusable components from one project; it will be used and expanded with additional projects.

Brown, James W.↗

The intensity dependent spread model and color constancy

Odetics is investigating the use of the intensity dependent spread (IDS) model for determining color constancy. Object segmentation is performed effortlessly by the human visual systems, but creating computer vision that takes an image as input and performs object identification on the basis of color has some difficulties. The unknown aspects of the light illuminating a scene in space or anywhere can seriously interfere with the use of color for object identification. The color of an image depends not only on the physical characteristics of the object, but also on the wavelength composition of the incident illumination. IDS processing provides the extraction of edges and of reflectance changes across edges, independent of variations in scene illumination. IDS depends solely on the ratio of the reflectances on the two sides of the edge. Researchers are in the process of using IDS to recover the reflectance image.

Kurrasch, Ellie↗

Fatigue In Continuous-Fiber/Metal-Matrix Composites

Report describes experimental approaches to quantification of fatigue damage in metal-matrix composites (MMC's). Discusses number of examples of development of damage and failure along with associated analytical models of behavior of MMC. Objectives of report are twofold. First, present experimental procedures and techniques for conducting meaningful fatigue tests to detect and quantify fatigue damage in MMC's. Second, present examples of how fatigue damage initiated and grows in various MMC's. Report furnishes some insight into what type of fatigue damage occurs and how damage quantified.

Johnson, William S.↗

Fault-tolerant wait-free shared objects

A concurrent system consists of processes and shared objects. Previous research focused on the problem of tolerating process failure. We study the complementary problem of tolerating failures. We divide object failures into two broad classes: responsive and non-responsive. With responsive failures, a faulty object responds to every invocation, but responses may be incorrect. With non-responsive failures, a faulty object may also 'hang' without responding. For each class, we consider crash, and arbitrary types of failures. For each type of failure, we are seeking a universal implementation for fault-tolerant wait-free shared objects. We present (deterministic) implementations for all types of responsive failures, including arbitrary failures. In contrast, we show that even the most benign type of non-responsive failures requires the use of randomization. Of special interest is the problem of implementing fault-tolerant objects using only objects of the same type. We present such fault-tolerant self-implementations for many common object types. Graceful degradation is a desirable property of fault-tolerant implementations: the implemented object never fails more severely than the base objects it is derived from, even if all the base objects fail. For several failure models, we show whether this property can be achieved, and, if so, how. In addition to the above possibility/impossibility results, we also consider the resources complexity of fault-tolerant implementations. In many cases, we present lower bounds and give matching algorithms.

Jayanti, Prasad↗

The need for GPS standardization

A desirable and necessary step for improvement of the accuracy of Global Positioning System (GPS) time comparisons is the establishment of common GPS standards. For this reason, the CCDS proposed the creation of a special group of experts with the objective of recommending procedures and models for operational time transfer by GPS common-view method. Since the announcement of the implementation of Selective Availability at the end of last spring, action has become much more urgent and this CCDS Group on GPS Time Transfer Standards has now been set up. It operates under the auspices of the permanent CCDS Working Group on TAI and works in close cooperation with the Sub-Committee on Time of the Civil GPS Service Interface Committee (CGSIC). Taking as an example the implementation of SA during the first week of July 1991, this paper illustrates the need to develop urgently at least two standardized procedures in GPS receiver software: monitoring GPS tracks with a common time scale and retaining broadcast ephemeris parameters throughout the duration of a track. Other matters requiring action are the adoption of common models for atmospheric delay, a common approach to hardware design and agreement about short-term data processing. Several examples of such deficiencies in standardization are presented.

W. Lewandowski↗

Tools and techniques for estimating high intensity RF effects

Tools and techniques for estimating and measuring coupling and component disturbance for avionics and electronic controls are described. A finite-difference-time-domain (FD-TD) modeling code, TSAR, used to predict coupling is described. This code can quickly generate a mesh model to represent the test object. Some recent applications as well as the advantages and limitations of using such a code are described. Facilities and techniques for making low-power coupling measurements and for making direct injection test measurements of device disturbance are also described. Some scaling laws for coupling and device effects are presented. A method for extrapolating these low-power test results to high-power full-system effects are presented.

Zacharias, Richard L.↗

Eigenstructure assignment approach for structural damage detection

In this work, a methodology for incorporating measured modal data into an existing refined finite element model is examined with the objective of detecting and locating structural damage. The algorithm is based on the partial inverse problem, in that only partial spectral information is required. The technique utilizes a symmetric eigenstructure assignment algorithm to perform the partial spectral assignment. Algorithms to enhance mode shape assignability and to preserve sparsity in the damaged FEM are developed. The sparsity preservation is of particular importance when considering damage detection in trusslike structures. Several examples are presented to highlight the key points made within the paper.

Zimmerman, David C.↗

Gamma-ray bursts as the death throes of massive binary stars

We propose that gamma-ray bursts are created in the mergers of double neutron star binaries and black hole neutron star binaries at cosmological distances. Two different processes provide the electromagnetic energy for the bursts: neutrino-antineutrino annihilation into electron-position pairs during the merger, and magnetic flares generated by the Parker instability in a postmerger differentially rotating disk. In both cases, an optically thick fireball of size less than or approximately equal to 100 km is initially created, which expands ultrarelativistically to large radii before radiating. The scenario is only qualitative at this time, but it eliminates many previous objections to the cosmological merger model. The strongest bursts should be found close to, but not at the centers of, galaxies at redshifts of order 0.1, and should be accompanied by bursts of gravitational radiation from the spiraling-in binary which could be detected by LIGO.

Narayan, Ramesh↗

Sea level response to wind forcing in the tropical Atlantic

The circulation of the warm-water layer of the tropical Atlantic varies seasonally. This predominant signal is imposed by the annual migration of the Intertropical Covergence Zone separating two trade-wind regimes. As the migration varies interannually, so does the ocean circulation. A long-time objective of climate studies is to understand this interannual variability: to define its range, to fully explain the causal relationship between wind and ocean response, and eventually to understand how the resulting changes in sea surface temperature affect the wind field itself. Our initial objective is to observe and model the oceanic response.

Katz, Eli Joel↗

Root damage analysis of aircraft engine blade subject to ice impact

The blade root response due to ice impact on an engine blade is simulated using the NASA in-house code BLASIM. The ice piece is modeled as an equivalent spherical object impacting on the leading edge of the blade and has the velocity opposite to that of the aircraft with direction parallel to the engine axis. The effect of ice impact is considered to be an impulse load on the blade with its amplitude computed based on the momentum transfer principle. The blade response due to the impact is carried out by modal superposition using the first three modes. The maximum dynamic stresses at the blade root are computed at the quarter cycle of the first natural frequency. A combined stress failure function based on modified distortion energy is used to study the spanwise bending damage response at the blade root. That damage function reaches maximum value for very low ice speeds and increases steeply with increases in engine speed.

Reddy, E. S.↗

Dynamics of Rotating Multi-component Turbomachinery Systems

The ultimate objective of turbomachinery vibration analysis is to predict both the overall, as well as component dynamic response. To accomplish this objective requires complete engine structural models, including multistages of bladed disk assemblies, flexible rotor shafts and bearings, and engine support structures and casings. In the present approach each component is analyzed as a separate structure and boundary information is exchanged at the inter-component connections. The advantage of this tactic is that even though readily available detailed component models are utilized, accurate and comprehensive system response information may be obtained. Sample problems, which include a fixed base rotating blade and a blade on a flexible rotor, are presented.

Lawrence, Charles↗

Blasim: A computational tool to assess ice impact damage on engine blades

A portable computer called BLASIM was developed at NASA LeRC to assess ice impact damage on aircraft engine blades. In addition to ice impact analyses, the code also contains static, dynamic, resonance margin, and supersonic flutter analysis capabilities. Solid, hollow, superhybrid, and composite blades are supported. An optional preprocessor (input generator) was also developed to interactively generate input for BLASIM. The blade geometry can be defined using a series of airfoils at discrete input stations or by a finite element grid. The code employs a coarse, fixed finite element mesh containing triangular plate finite elements to minimize program execution time. Ice piece is modeled using an equivalent spherical objective that has a high velocity opposite that of the aircraft and parallel to the engine axis. For local impact damage assessment, the impact load is considered as a distributed force acting over a region around the impact point. The average radial strain of the finite elements along the leading edge is used as a measure of the local damage. To estimate damage at the blade root, the impact is treated as an impulse and a combined stress failure criteria is employed. Parametric studies of local and root ice impact damage, and post-impact dynamics are discussed for solid and composite blades.

Reddy, E. S.↗

An interpretation of the spectral properties of hot hydrogen-rich white dwarfs with stratified H/He model atmospheres

A grid of stratified H/He model atmospheres applicable to the interpretation of the spectral properties of hot H-rich white dwarfs (WDs) is computed. Samples of hot DA WDs observed with Exosat and Einstein are analyzed using the models. Six out of six objects with T(eff) = 35,000 K or less do not show a EUV/soft X-ray flux deficiency and therefore can be understood solely in terms of pure hydrogen atmospheres. A majority of DA WDs hotter than this value do show a flux deficiency and thus require the presence of some absorbers in their atmospheres. It is shown that the Exosat broadband photometry of Feige 24 and G191 B2B cannot be explained in terms of stratified atmospheres. Absorption by heavy elements is certainly responsible for the required EUV/soft X-ray opacity source in these cases. However, the Exosat data are consistent with the hypothesis of stratified atmospheres in the four remaining objects.

Vennes, Stephane↗

Dynamics of rotating multicomponent turbomachinery systems

The ultimate objective of turbomachinery vibration analysis is to predict both the overall, as well as component dynamic response. To accomplish this objective requires complete engine structural models, including multistages of bladed disk assemblies, flexible rotor shafts and bearings, and engine support structures and casings. In the present approach each component is analyzed as a separate structure and boundary information is exchanged at the inter-component connections. The advantage of this tactic is that even though readily available detailed component models are utilized, accurate and comprehensive system response information may be obtained. Sample problems, which include a fixed base rotating blade and a blade on a flexible rotor, are presented.

Lawrence, Charles↗

BLASIM - A computational tool to assess ice impact damage on engine blades

A portable computer code called BLASIM is developed at NASA LeRC to assess the ice impact damage on aircraft engine blades. In addition to the ice impact analyses, the code is also capable of carrying out static, dynamic, resonance margin and flutter analyses. The blade can be solid, hollow, superhybrid or composite material. An optional preprocessor (input generator) is also developed to generate input to the code through interactive process. The blade geometry can be defined either by a series of airfoils at discrete input stations or by a finite element grid. The code employs a coarse fixed finite element mesh with triangular plate finite elements and has quick turnaround time. The ice piece is modeled as an equivalent spherical object and has the velocity opposite to that of the aircraft with direction parallel to the engine axis. For the local impact damage assessment, the impact force is considered as a distributed load acting over a region around the impact point and the average radial strain of the finite elements along the leading edge is taken as a measure of the local damage. To estimate the damage at the blade root, the impact is considered to be an impulse and a combined stress failure criteria is employed. Parametric studies for local and root ice impact damage, and post-impact dynamics are discussed for solid and composite blades.

Reddy, E. S.↗