Search NASA⌕ Search

SEARCH · Search NASA

Results for “Particle Size Distribution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Factors and Dynamics of Cu Nanocrystal Reconstruction under CO 2 Reduction

Cu nanocrystals as catalysts for CO 2 reduction are a subject of considerable contemporary interest, but their stability has not been considered as extensively. In this paper, we report on the reconstruction of Cu nanocrystals during CO 2 reduction and discuss the factors influencing the observed changes with computer-based quantitative analysis and spectroscopic techniques. The timelines of opposing phenomena, sintering and declustering, previously reported separately, are detailed with a focus on two forces affecting the final morphology: Applied potential and reaction intermediates. This intriguing system demonstrates the need for fundamental understanding of catalyst behavior preceding the ability to control its performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Material Characterization-Based Wear Mechanism Investigation for Biomass Hammer Mills

Biomass, as harvested, is composed of inorganic compounds both intrinsically and extrinsically and can be abrasive. The present study investigates the wear modes and mechanisms of two types of blades of hammer mills used in biomass size reduction (impacting the particle size and distribution) and densification (impacting the size, shape, and density). The dominant wear modes for the stage 1 steel blades are determined to be erosive and polishing wear. For the stage 2 blades with a carbide weld overlay, the main wear mechanisms are erosion and fracture. Partial replacement of Co by Fe in the outer layer of the carbide grits, likely induced by diffusion during high-temperature welding, has been correlated to the observed microcracking. Finally, the microcracking is believed to weaken the grit strength and fracture toughness to make the overlay prone to fracture and erosion due to repetitive contact with the inorganic contents in chopping biomass.

42 ENGINEERING↗
DOE OSTI2015

Synthesis and Characterization of Graft Copolymers Poly(isoprene-g-styrene) of High Molecular Weight by a Combination of Anionic Polymerization and Emulsion Polymerization

In this study, high molecular weight “comb-shaped” graft copolymers, poly(isoprene-g-styrene), with polyisoprene as the backbone and polystyrene as side chains, were synthesized via free radical emulsion polymerization by copolymerization of isoprene with a polystyrene macromonomer synthesized using anionic polymerization. A small amount of toluene was used in order to successfully disperse the macromonomer. Both a redox and thermal initiation system were used in the emulsion polymerization, and the latex particle size and distribution were investigated by dynamic light scattering. The structural characteristics of the macromonomer and comb graft copolymers were investigated through use of size exclusion chromatography, spectroscopy, microscopy, thermal analysis, and rheology. While the macromonomer was successfully copolymerized to obtain the desired multigraft copolymers, small amounts of unreacted macromonomer remained in the products, reflecting its reduced reactivity due to steric effects. Nevertheless, the multigraft copolymers obtained were very high in molecular weight (5–12 × 10 5 g/mol) and up to 10 branches per chain, on average, could be incorporated. A material incorporating 29 wt% polystyrene exhibits a disordered microphase separated morphology and elastomeric properties. As a result, these materials show promise as new, highly tunable, and potentially low cost thermoplastic elastomers.

36 MATERIALS SCIENCE↗
DOE OSTI2024

A Comprehensive Northern Hemisphere Particle Microphysics Data Set From the Precipitation Imaging Package

Microphysical observations of precipitating particles are critical data sources for numerical weather prediction models and remote sensing retrieval algorithms. However, obtaining coherent data sets of particle microphysics is challenging as they are often unindexed, distributed across disparate institutions, and have not undergone a uniform quality control process. This work introduces a unified, comprehensive Northern Hemisphere particle microphysical data set from the National Aeronautics and Space Administration precipitation imaging package (PIP), accessible in a standardized data format and stored in a centralized, public repository. Data is collected from 10 measurement sites spanning 34° latitude (37°N–71°N) over 10 years (2014–2023), which comprise a set of 1,070,000 precipitating minutes. The provided data set includes measurements of a suite of microphysical attributes for both rain and snow, including distributions of particle size, vertical velocity, and effective density, along with higher-order products including an approximation of volume-weighted equivalent particle densities, liquid equivalent snowfall, and rainfall rate estimates. The data underwent a rigorous standardization and quality assurance process to filter out erroneous observations to produce a self-describing, scalable, and achievable data set. Case study analyses demonstrate the capabilities of the data set in identifying physical processes like precipitation phase-changes at high temporal resolution. Bulk precipitation characteristics from a multi-site intercomparison also highlight distinct microphysical properties unique to each location. This curated PIP data set is a robust database of high-quality particle microphysical observations for constraining future precipitation retrieval algorithms, and offers new insights toward better understanding regional and seasonal differences in bulk precipitation characteristics.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2017

pH-Dependent Single-Step Rapid Synthesis of CuO Nanoparticles and Their Optical Behavior

This paper reports the pH-dependent growth of copper oxide (CuO) nanoparticles by wet chemical precipitation method using pH value of the samples as the only variable parameter. The phase purity, morphology, optical behavior, and elemental analysis of synthesized nanoparticles are shown to be critically dependent on the pH of the samples. Scanning electron microscope (SEM) results shows that a higher pH results well-defined CuO nanoflakes. X-ray powder diffraction (XRD) results disclosed that the growth of pure CuO with monoclinic structure at higher pH 8, whereas mixed phase was formed at lower pH 7. The average crystallite size of samples prepared at pH 8 to 10 was varying from 23.36 to 25.78 nm. The infrared spectroscopy showed that the O–H stretching peaks become narrow with an increase in the pH value. Optical results revealed the existence of the sharp absorption edges with precise excitonic features and photoluminescence bands both located at visible and near infrared spectral region attributed to the excellent optical behavior and narrow size distribution of particles. The additional near infrared band in photoluminescence spectrum located at 860 nm is attributed the defect-related luminescence. The growth mechanism of CuO nanostructures was discussed in the light of our findings.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Geochemistry of East River, Colorado floodplain sediments from Meander Z and Meander Y collected in 2017.

This dataset includes sediment geochemical characterization data from floodplain sediments collected as a part of the Watershed Function Scientific Focus Area (SFA) located in the Upper Colorado River Basin. The data were collected in order to investigate the role of biogeochemical cycling and other river corridor processes on riverine export of solutes. Sediment cores were collected from Meander Z (MZA, MZB) and Meander Y (MYP) just upstream of the confluence with Brush Creek in September 2017 to depths of approximately 40-95 cm in 15-20 cm intervals. Analyses include moisture content, particle size analysis, total inorganic and total organic carbon, and extractions by 1 M KCl (for adsorbed NH4), anoxic HCl (for Fe(II) content), ammonium oxalate (for amorphous Fe-oxide content), and dithionite (for crystalline Fe-oxide content). Sample locations are included in both a kmz file, which can be opened in Google Earth, and a csv file, and methods are included as a text document. All characterization data is summarized in a Microsoft Excel file, and is also included as individual .csv files for each extraction (ammonium oxalate, anoxic HCl, dithionite, and KCl) and for bulk sediment data (moisture content, particle size analysis, TIC, and TOC).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

A Parameterization Study of Sew-EZ Materials: Types #6 and #8

Two material types identified by Sew-EZ were tested in various configurations, and under various conditions, by Sandia National Laboratories (SNL). The primary focus of this study was to assess the filtration performance of these two materials and identify if they perform similarly to certified N95 respirators. Testing was conducted on two systems which use distinctly different techniques to characterize the aerosol penetration characteristics of materials: a) R&D Filtration System: A large-scale R&D filtration system was used with testing parameters that mimicked NIOSH guidelines, where possible. Efficiency data as a function of particle size was attained using NaC1 as the test aerosol and a Scanning Mobility Particle Sizer (SMPS) for measurements. A more detailed system description can be found in Omana et al. 2020. b) Automated Tester: A commercial, automated filter tester (100Xs, Air Techniques International) was used to provide penetration/efficiency data for Sew EZ materials. The 100Xs aerosolizes a polydisperse NaC1 aerosol with a consistent concentration and size profile. The 100Xs manual (Air Techniques International 2018) states, "The aerosol particle size and distribution are designed to meet all requirements as defined in the relevant sections of NIOSH 42 CFR, Part 84 (pg. 32)."

36 MATERIALS SCIENCE↗
DOE OSTI2019

Geochemical characterization of floodplain sediments from Meander C and O in the East River Watershed, CO, USA

This data package is part of the Watershed Function SFA data collection and contains geochemical characterization of sediments as a function of depth in the pumphouse vicinity, including Meander C and Meander O (oxbow). This data was used in the manuscript "Fox, P.M., Bill, M., Heckman, K., Conrad, M., Anderson, C., Keiluweit, M., and Nico, P.S.Shale as a Source of Organic Carbon in Floodplain Sediments of a Mountainous Watershed" published in Journal of Geophysical Research: Biogeosciences. Data includes sieving, total organic carbon (TOC), total inorganic carbon (TIC), total nitrogen (TN), carbon isotopes (14C and 13C) of whole sediment. Sediment density fractionation data is also included, with measurements of TOC, TN, 14C and 13C on density fractions. Metal and carbon concentrations from various sediment extractions (HCl, dithionite, oxalate, water, and pyrophosphate) are included. Characterization of extracted carbon by fourier transform infrared spectroscopy (FTIR) and UV-Visible light spectroscopy. Characterization of density fractionated (light fractions) organic carbon by FTIR. Carbon X-ray spectroscopy (C near edge X-ray absorption fine structure spectroscopy [NEXAFS] and scanning transmission X-ray microscopy [STXM]) is also included for shale samples and sediment samples.Additional acknowledgements:1. M.K. and C.A. were supported by the Department of Energy, Office of Biological and Environmental Research, Subsurface Biosphere Research program (award no. DE-SC0016544).2. STXM and NEXAFS data was collected at the Canadian Light Source, which is supported by the Canada Foundation for Innovation, Natural Sciences and Engineering Research Council of Canada, the University of Saskatchewan, the Government of Saskatchewan, Western Economic Diversification Canada, the National Research Council Canada, and the Canadian Institutes of Health Research.3. Radiocarbon analysis was supported in part by the Radiocarbon Collaborative, which is jointly sponsored by the USDA Forest Service Northern Research Station, the KCCAMS Facility at UC Irvine, and Michigan Technological University.Update 11/06/2019: An .kml file was added with the GPS locations for all the sampling sites.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Editorial: Functionalization of porous materials for sustainable energy applications

Global energy demands are shifting toward a more sustainable future, with the goal of achieving carbon neutrality by 2050. Emerging technologies are driving this transition. The industry, academia, government, non-profit organizations, and the broader community are collaboratively working to reduce greenhouse gas (GHG) emissions and address climate change to ensure a sustainable future. According to the International Energy Agency, in 2022, the production, transportation, and processing of oil and gas resulted in 5.1 billion tons of CO 2 -equivalent emissions, representing nearly 15% of all energy-related GHG emissions. Moreover, the end-use of oil and gas accounted for an additional 40% of emissions. The IEA’s Net Zero Emissions by 2050 Scenario calls for immediate, collective action from the industry, transportation and other stakeholders to mitigate these emissions. In this effort, the development of energy materials will play a critical role in reducing emissions. Among these, porous materials offer an innovative solution, leveraging their high surface area, adjustable pore sizes, and chemical versatility to address these pressing challenges effectively. By carefully designing their nanostructures, the architecture and properties of these materials can be tailored for specific applications. Key factors such as chemical composition, particle size, pore distribution, and surface area optimization enhance the reactivity and energy conversion efficiency. Additionally, pre- and post-functionalization processes can introduce targeted chemical properties, further improving their performance. This Research Topic explores recent advancements in energy and materials science through four scholarly papers, showcasing innovative solutions for sustainable energy technologies while providing valuable insights into the unique properties and structure of porous materials (Figure 1). Li et al. present their work on highly defective NiFeV layered triple hydroxides, highlighting enhanced electrocatalytic activity and stability for oxygen evolution reactions (OER). Kovalskii et al. contribute a mini-review on hydrogen storage using hexagonal boron nitride (h-BN) and BN-based materials, offering an insightful overview of these promising materials. Chava et al. discuss their recent achievements in ceramic electrolytes used for improvement of performance of solid-state batteries. Lastly, Li et al. review the properties of porous materials with a focus on shrinkage behavior during the drying process, shedding light on key considerations for material design.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Editorial: Particulate Matter Emissions From Conventional and Reformulated Fuel Combustion: Advances in Experiments and Simulations

Particulate matter (PM or soot) emissions generated by combustion of conventional and reformulated fuels adversely impact the environment and human health (Bond et al., 2013; Landrigan et al., 2018; World Health Organization (WHO), 2016), generating public awareness and motivating efforts towards the mitigation of their harmful effects. Soot formation is one of the most complex phenomena in combustion, involving interactions between combustion chemistry, fluid mechanics, mass/heat transport, and particle dynamics, spanning different spatial and temporal scales. A fundamental understanding of soot formation process is thus necessary to achieve a strong reduction of PM emissions and design cleaner and more efficient combustion systems. This has motivated a longstanding and ongoing research activity aimed at improving our understanding of the physical and chemical processes involved in soot formation, well reviewed in these recent works (Wang and Chung, 2019; Michelsen et al., 2020; Martin et al., 2022). Despite the wide interest, the transition from gas-phase molecules to incipient soot particles is still elusive and the successive particle growth and oxidation processes are far from being fully understood, especially in conditions relevant to real-world applications. Recent advances in combustion PM emission diagnostic and computational capabilities helped in improving the predictability of fundamental chemical and aerosol models for practical applications, thus tackling some of the above-mentioned challenges. The aim of this research topic is to display the ongoing research efforts in addressing the existing gaps on particulate formation from various fuel sources and in conditions typical of practical combustion applications (e.g. flames, engines, pool fires), through both experimental and numerical approaches.

42 ENGINEERING↗
DOE OSTI2024

A Biochar Classification System and Associated Test Methods

In this chapter, a biochar classification system related to its use as soil amendment is proposed. This document builds upon previous work: “Standardized product definition and product testing guidelines for biochar that is used in soil” (IBI, 2015) (aka IBI Biochar Standards) and “Guidelines for biochar production for a sustainable production of biochar: European Biochar Certificate” (EBC, 2012-2022) (aka EBC Biochar Standards). It should be noted that the EBC guidelines constitute the basis for biochar certification through the independent government accredited inspection agency, Bio.Inspecta AG. The present document constrains its scope to materials with properties that satisfy the criteria for biochar as defined by either the IBI Biochar Standards or the EBC Standards (Annex I), as required by the current methodologies developed for accounting carbon credits associated with the biochar use in the voluntary market (e.g., Verra, Puro.Earth). The classification system envisions enabling stakeholders and commercial entities to (i) identify the most suitable biochar to fulfil the requirements for a particular soil and/or land-use, (ii) distinguish the application of biochar for specific niches (e.g., soilless agriculture), and (iii) assess the climate-impact value based on biochar properties, production efficiency, and alternative feedstock uses. It is based on the best current knowledge and will need to be improved as new data and knowledge become available in the scientific literature.

biochar, climate change impacts, soil amendment, c↗