Search NASA⌕ Search

SEARCH · Search NASA

Results for “STRESS CALCULATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

An Energy Based Fatigue Life Prediction Framework for In-Service Structural Components

An energy based fatigue life prediction framework has been developed for calculation of remaining fatigue life of in service gas turbine materials. The purpose of the life prediction framework is to account aging effect caused by cyclic loadings on fatigue strength of gas turbine engines structural components which are usually designed for very long life. Previous studies indicate the total strain energy dissipated during a monotonic fracture process and a cyclic process is a material property that can be determined by measuring the area underneath the monotonic true stress-strain curve and the sum of the area within each hysteresis loop in the cyclic process, respectively. The energy-based fatigue life prediction framework consists of the following entities: (1) development of a testing procedure to achieve plastic energy dissipation per life cycle and (2) incorporation of an energy-based fatigue life calculation scheme to determine the remaining fatigue life of in-service gas turbine materials. The accuracy of the remaining fatigue life prediction method was verified by comparison between model approximation and experimental results of Aluminum 6061-T6. The comparison shows promising agreement, thus validating the capability of the framework to produce accurate fatigue life prediction.

33 ADVANCED PROPULSION SYSTEMS↗

Minimizing the Electromechanical Stresses in Poloidal Field Coils by Optimizing their Numbers and Locations using FREDA Framework

Poloidal field (PF) and central solenoid (CS) coils play a crucial role in sustaining the equilibrium and preserving the shape of highly confined tokamak plasmas. Ensuring that PF coil current and mechanical stress stay within superconducting and structural limitations is an important check in the design assessment. Minimizing the PF coil currents and mechanical stresses influences reliability, cost, and performance. A free-boundary MHD equilibrium code—FreeGS is employed within the fusion reactor design and assessment (FREDA) whole facility modeling (WFM) framework to construct the plasma equilibrium based on the configuration and currents in the PF coils. Here, we present the capability of the FreeGS code to minimize the currents, forces, and electromagnetic stresses on the PF coils by optimizing their number, sizes, structures, and locations while maintaining an MHD stable plasma configuration with a large confinement factor. The workflow is initialized with a configuration of plasma parameters and coils’ locations from the 0-D tokamak build systems code in the FREDA framework. Then, FreeGS is called to calculate the initial equilibrium at the minimum total current in PF coils. Thereafter, FreeGS’s internal optimizer minimizes the currents and hoop and central forces on the PF coils while maintaining the reference equilibrium. Finally, the input configuration is updated with the optimized parameters for equilibria over the ramp-up phase of a burning-plasma operation. FREDA’s whole facility optimization capability, which includes all magnetic field coil systems, blanket, vacuum vessel (VV), first wall, divertor, etc., is under development and out of the scope for this study.

Hassan, Ehab [ORNL] (ORCID:0000000181060301)↗

Modelling of Superplastic Forming of AZ31 Magnesium Alloy

In this study the constitutive equation of the superplastic AZ31 magnesium-based alloy is modelled by the power law relationship between the stress, the strain and the strain-rate and an accurate procedure for determining the constants of the material is presented. Moreover, the problem of optimizing the pressure-time load curve of a free forming process is investigated and resolved by means of a pressure jump forming process. The experimental tests, carried out to support the finite-element modelling, have shown good agreement between the numerical results and the experimental data.

36 MATERIALS SCIENCE↗

Constitutive Behavior and Hot Workability of a Hot Isostatic Pressed Ti-22Al-25Nb Alloy during Hot Compression

A Ti-22Al-25Nb alloy was fabricated from prealloyed powders by hot isostatic pressing for 2 h at a temperature of 1050 °C and pressure of 100 MPa. The hot deformation behavior of the Ti-22Al-25Nb alloy was characterized by isothermal compression testing at deformation temperatures between 900 and 1060 °C and strain rates between 0.001 and 1 s{sup −1}. Based on the true stress–strain curves, a constitutive equation was constructed to describe the flow stress as a function of the strain rate and deformation temperature. Three-dimensional (3D) processing maps were developed based on dynamic material model theory using the stress flow data to identify the instability and optimization regions of the hot processing parameters. The results show that the flow stress decreases with increasing deformation temperature and decreasing strain rate, and the softening mechanisms are different under different deformation conditions. The apparent activation energies in the (α{sub 2} + β/B2 + O) and (α{sub 2} + B2) phase regions are calculated to be 865.177 and 590.661 kJ/mol, respectively, which suggests that the hot isostatic pressed (HIPed) Ti-22Al-25Nb alloy requires a high hot deformation activation energy. Combined with microstructural observations, the optimal processing domains are determined to be a temperature range of 1030-1060 °C and strain rate range of 0.01-0.1 s{sup −1} in the α{sub 2} + B2 phase region. Moreover, the results indicate that adiabatic shear bands and severe inhomogeneous deformation cause flow instability at lower temperatures (900-1005 °C) and higher strain rates (> 0.1 s{sup −1}).

36 MATERIALS SCIENCE↗

Thermal-Structural Analysis of the MacArthur Maze Freeway Collapse

At approximately 3:41 AM on the morning of April 29, 2007, a tractor-trailer rig carrying 8,600 gallons (32.6 m{sup 3}) of fuel overturned on Interstate 880 in Oakland, CA. The resultant fire weakened the surrounding steel superstructure and caused a 50-yard (45.7 m) long section of the above connecting ramp from Interstate 80 to Interstate 580 to fail in approximately 18 minutes. In this study, we performed a loosely-coupled thermal-structural finite element analysis of the freeway using the LLNL Engineering codes NIKE3D, DYNA3D and TOPAZ3D. First, we applied an implicit structural code to statically initialize the stresses and displacements in the roadway at ambient conditions due to gravity loading. Next, we performed a thermal analysis by approximating the tanker fire as a moving box region of uniform temperature. This approach allowed for feasible calculation of the fire-to-structure radiative view factors and convective heat transport. We used a mass scaling methodology in the thermal analysis to reduce the overall simulation time so an explicit structural analysis could be used, which provided a more computationally efficient simulation of structural failure. Our approach showed structural failure of both spans due to thermal softening under gravity loading at approximately 20 minutes for a fixed fire temperature of 1200 C and fixed thermal properties. When temperature-dependent thermal properties were applied, the south and north spans collapsed at approximately 10 minutes and 16 minutes, respectively. Finally, we performed a preliminary fully-coupled analysis of the system using the new LLNL implicit multi-mechanics code Diablo. Our investigation shows that our approach provides a reasonable first-order analysis of the system, but improved modeling of the transport properties and the girder-box beam connections is required for more accurate predictions.

42 ENGINEERING↗

Crystal Plasticity Finite Element Analysis of Loading-Unloading Behaviour in Magnesium Alloy Sheet

Magnesium alloy sheets exhibit strong inelastic response during unloading. In this study crystal plasticity finite element analysis of loading-unloading behaviour during uniaxial tension in a rolled magnesium alloy sheet was carried out, and the mechanism of this inelastic response was examined in detail in terms of macroscopic and mesoscopic deformations. The unloading behaviour obtained by the simulation was in good agreement with the experiment in terms of variation with stress of instantaneous tangent modulus during unloading. Variations of activities of each family of slip systems during the deformation showed that the activation of basal slip systems is the largest during unloading, and the slip direction during unloading is opposite from during loading. These results indicated that one of the factors of the inelastic behaviour during unloading is the fact that the basal slip systems are easily activated during unloading because of their low strengths.

36 MATERIALS SCIENCE↗

Computation of forces and stresses in solids: Towards accurate structural optimization with auxiliary-field quantum Monte Carlo

The accurate computation of forces and other energy derivatives has been a long-standing challenge for quantum Monte Carlo methods. A number of technical obstacles contribute to this challenge. We discuss how these obstacles can be removed with the auxiliary-field quantum Monte Carlo (AFQMC) approach. AFQMC is a general, high-accuracy, many-body total-energy method for molecules and solids. The implementation of back-propagation for pure estimators allows direct calculation of gradients of the energy via the Hellmann-Feynman theorem. A planewave basis with norm-conserving pseudopotentials is used for the study of periodic bulk materials. Completeness of the planewave basis minimizes the effect of so-called Pulay terms. The ionic pseudopotentials, which can be incorporated in AFQMC in exactly the same manner as in standard independent-electron methods, regulate the force and stress estimators and eliminate any potential divergence of the Monte Carlo variances. The resulting approach allows applications of full geometry optimizations in bulk materials. As a result, it also paves the way for many-body computations of the phonon spectrum in solids.

36 MATERIALS SCIENCE↗

A robust return-map algorithm for general multisurface plasticity

Three new contributions to the field of multisurface plasticity are presented for general situations with an arbitrary number of nonlinear yield surfaces with hardening or softening. A method for handling linearly dependent flow directions is described. A residual that can be used in a line search is defined. An algorithm that has been implemented and comprehensively tested is discussed in detail. Examples are presented to illustrate the computational cost of various components of the algorithm. The overall result is that a single Newton-Raphson iteration of the algorithm costs between 1.5 and 2 times that of an elastic calculation. Examples also illustrate the successful convergence of the algorithm in complicated situations. For example, without using the new contributions presented here, the algorithm fails to converge for approximately 50% of the trial stresses for a common geomechanical model of sedementary rocks, while the current algorithm results in complete success. Since it involves no approximations, the algorithm is used to quantify the accuracy of an efficient, pragmatic, but approximate, algorithm used for sedimentary-rock plasticity in a commercial software package. Furthermore, the main weakness of the algorithm is identified as the difficulty of correctly choosing the set of initially active constraints in the general setting.

15 GEOTHERMAL ENERGY↗

On the Virasoro six-point identity block and chaos

We study six-point correlation functions in two dimensional conformal field theory, where the six operators are grouped in pairs with equal conformal dimension. Assuming large central charge $c$ and a sparse spectrum, the leading contribution to this correlation function is the six-point Virasoro identity block - corresponding to each distinct pair of operators fusing into the identity and its descendants. We call this the star channel. One particular term in the star channel identity block is the stress tensor $SL(2,\mathbb{R})$ (global) block, for which we derive an explicit expression. In the holographic context, this object corresponds to a direct measure of nonlinear effects in pure gravity. We calculate additional terms in the star channel identity block that contribute at the same order at large $c$ as the global block using the novel theory of reparametrizations, which extends the shadow operator formalism in a natural way. We investigate these blocks' relevance to quantum chaos in the form of six-point scrambling in an out-of time ordered correlator. Interestingly, the global block does not contribute to the scrambling mode of this correlator, implying that, to leading order, six-point scrambling is insensitive to the three-point graviton coupling in the bulk dual. Finally, we compare our findings with a different OPE channel, called the comb channel, and find the same result for the chaos exponent in this decomposition.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Strength of Reinforced Concrete Structures of Hydroelectric Power Plants and Nuclear Power Plants

The reinforced concrete structures of hydroelectric power plants and nuclear power plants differ from civil structures by their massive nature, including high cross-sections, low reinforcement percentage, and the presence of block seams. A decrease in the safety of these structures results when these features are not taken into account. Methods of calculation that take these features into account are proposed.

42 ENGINEERING↗

Spall fracture in additive manufactured Ti-6Al-4V

Here, we present a study on the spall strength of additive manufactured (AM) Ti-6Al-4V. Samples were obtained from two pieces of selective laser melted (SLM, a powder bed fusion technique) Ti-6Al-4V such that the response to dynamic tensile loading could be investigated as a function of the orientation between the build layers and the loading direction. A sample of wrought bar-stock Ti-6Al-4V was also tested to act as a baseline representing the traditionally manufactured material response. A single-stage light gas-gun was used to launch a thin flyer plate into the samples, generating a region of intense tensile stress on a plane normal to the impact direction. The rear free surface velocity time history of each sample was recorded with laser-based velocimetry to allow the spall strength to be calculated. The samples were also soft recovered to enable post-mortem characterization of the spall damage evolution. Results showed that when the tensile load was applied normal to the interfaces between the build layers caused by the SLM fabrication process the spall strength was drastically reduced, dropping to 60% of that of the wrought material. However, when loaded parallel to the AM build layer interfaces the spall strength was found to remain at 95% of the wrought control, suggesting that when loading normal to the AM layer interfaces, void nucleation is facilitated more readily due to weaknesses along these boundaries. Quasi-static testing of the same sample orientations revealed a much lower degree of anisotropy, demonstrating the importance of rate-dependent studies for damage evolution in AM materials.

36 MATERIALS SCIENCE↗

Parity violation of primordial magnetic fields in the CMB bispectrum

We study the parity violation in the cosmic microwave background (CMB) bispectrum induced by primordial magnetic fields (PMFs). Deriving a general formula for the CMB bispectrum generated from not only non-helical but also helical PMFs, we find that helical PMFs produce characteristic signals, which disappear in parity-conserving cases, such as the intensity-intensity-intensity bispectra arising from Σ{sup 3}{sub n=1}l{sub n} = odd. For fast numerical calculation of the CMB bispectrum, we reduce the one-loop formula to the tree-level one by using the so-called pole approximation. Then, we show that the magnetic anisotropic stress, which depends quadratically on non-helical and helical PMFs and acts as a source of the CMB fluctuation, produces the local-type non-Gaussianity. Comparing the CMB bispectra composed of the scalar and tensor modes with the noise spectra, we find that assuming the generation of the nearly scale-invariant non-helical and helical PMFs from the grand unification energy scale (10{sup 14}GeV) to the electroweak one (10{sup 3}GeV), the intensity-intensity-intensity bispectrum for Σ{sup 3}{sub n=1}l{sub n} = odd can be observed by the WMAP experiment under the condition that B{sub 1Mpc;}{sup 2/3}B{sub 1Mpc;}{sup 1/3} > 2.7−4.5nG with B{sub 1Mpc;} and B{sub 1Mpc;} being the non-helical and helical PMF strengths smoothed on 1 Mpc, respectively.

79 ASTRONOMY AND ASTROPHYSICS↗

Thermal interpretation of infrared dynamics in de Sitter

The infrared dynamics of a light, minimally coupled scalar field in de Sitter spacetime with Ricci curvature R = 12 H {sup 2}, averaged over horizon sized regions of physical volume V {sub H} = (4π/3)(1/ H ){sup 3}, can be interpreted as Brownian motion in a medium with de Sitter temperature T {sub DS} = h-bar H /2π. We demonstrate this by directly deriving the effective action of scalar field fluctuations with wavelengths larger than the de Sitter curvature radius and generalizing Starobinsky's seminal results on stochastic inflation. The effective action describes stochastic dynamics and the fluctuating force drives the field to an equilibrium characterized by a thermal Gibbs distribution at temperature T {sub DS} which corresponds to a de Sitter invariant state. Hence, approach towards this state can be interpreted as thermalization. We show that the stochastic kinetic energy of the coarse-grained description corresponds to the norm of ∂{sub μ}φ and takes a well defined value per horizon volume ½((∇φ){sup 2}) = − ½ T {sub DS}/ V {sub H} . This approach allows for the non-perturbative computation of the de Sitter invariant stress energy tensor ( T {sub μν}) for an arbitrary scalar potential.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Massive neutrinos and magnetic fields in the early universe

Primordial magnetic fields and massive neutrinos can leave an interesting signal in the CMB temperature and polarization. We perform a systematic analysis of general perturbations in the radiation-dominated universe, accounting for any primordial magnetic field and including leading-order effects of the neutrino mass. We show that massive neutrinos qualitatively change the large-scale perturbations sourced by magnetic fields, but that the effect is much smaller than previously claimed. We calculate the CMB power spectra sourced by inhomogeneous primordial magnetic fields, from before and after neutrino decoupling, including scalar, vector and tensor modes, and consistently modeling the correlation between the density and anisotropic stress sources. In an appendix we present general series solutions for the possible regular primordial perturbations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Development of a statistically based access delay timeline methodology.

The charter for adversarial delay is to hinder access to critical resources through the use of physical systems increasing an adversary s task time. The traditional method for characterizing access delay has been a simple model focused on accumulating times required to complete each task with little regard to uncertainty, complexity, or decreased efficiency associated with multiple sequential tasks or stress. The delay associated with any given barrier or path is further discounted to worst-case, and often unrealistic, times based on a high-level adversary, resulting in a highly conservative calculation of total delay. This leads to delay systems that require significant funding and personnel resources in order to defend against the assumed threat, which for many sites and applications becomes cost prohibitive. A new methodology has been developed that considers the uncertainties inherent in the problem to develop a realistic timeline distribution for a given adversary path. This new methodology incorporates advanced Bayesian statistical theory and methodologies, taking into account small sample size, expert judgment, human factors and threat uncertainty. The result is an algorithm that can calculate a probability distribution function of delay times directly related to system risk. Through further analysis, the access delay analyst or end user can use the results in making informed decisions while weighing benefits against risks, ultimately resulting in greater system effectiveness with lower cost.

Rivera, W. Gary↗

ChIMES: A Machine-Learned Interatomic Model Targeting Improved Description of Condensed Phase Chemistry in Energetic Materials

In this report we detail completion of a Physics and Engineering Model Level Two Milestone targeting improved reactive interatomic potentials (IAPs) for energetic materials (EM) through machine learning. The specific goals of this milestone were to develop, validate, and document a new reactive molecular dynamics method for EM, based on machine learning by (1) generating databases of first-principles-derived forces, stresses, and energies for HN3 and 3,4-bis(3-nitrofurazan- 4-yl)furoxan (DNTF) (2) generate atomistic force fields from these databases via ML, and (3) benchmark model performance against first principles calculations. These goals were achieved by (1) further developing a machine learned reactive IAP and generation approach (i.e. the Chebyshev Interaction Model for Efficient Simulation or “ChIMES”), for which resulting IAPs can approach the predictive power of quantum-mechanical approaches at a fraction of the computational expense, and (2) applying the ChIMES framework to develop models for HN3 and DNTF. We find that for simple energetic materials like HN3, high accuracy ChIMES models can be obtained through application of a fitting approach that does not use active machine learning. We demonstrate the suitability of ChIMES models for simulations involving EM by using the HN3 model in multiscale shock technique simulations to predict the HN3 Chapman-Jouguet detonation state and investigate chemical evolution out to 1 ns following shock compression. This model is then used in larger direct shock (DS) simulations for a preliminary investigation of how bubbles (i.e. voids) influence material response under shock compression. We find that more complex EM (i.e. DNTF) necessitate a more sophisticated fitting approach, and develop a new active learning method and python tool to meet this challenge. We demonstrate that this fitting approach yields ChIMES models that out-perform commonly used standard reactive IAPs as well as semi-empirical quantum methods, and discuss the systematic improvability of these actively learned ChIMES models. We also describe challenges related to model development for EM such as DNTF, for which few experimental or previous simulation data are available (e.g. which could otherwise inform generation of training data). To overcome this issue, we establish a semi-empirical quantum ChIMES capability which can be used to efficiently map out relevant thermodynamic and configurational space, and generate ChIMES-IAP training data in a multiscale manner. We also show that these semi-empirical quantum ChIMES models can be used to generate predictions for the shock Hugoniot (the Hugoniot is the locus of thermodynamic states found in a shocked material) equation of state, investigate related thermochemistry, and explore carbon condensation following shock compression. This work represents a substantial advance in our atomistic modeling capability for EM that will provide much needed information on the chemistry of detonation for continued development of continuum models based on the Cheetah thermochemical code.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Engineering Assessment of UO 2 and Cladding Behavior under High Burnup LOCA Conditions

To maximize the data extracted from a limited number of high-burnup fuel rod samples, several modeling efforts were performed to elucidate the fuel and the cladding responses of these fuels under transient conditions. These objectives were (1) to determine the role of the fuel stress state in fuel pulverization, (2) to ascertain the differences between conditions of cladding burst during experiments and those expected during a commercial reactor transient, and (3) to develop a method to conservatively calculate the geometry of the cladding rupture’s opening to inform fuel dispersal susceptibility.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

CASTING DEFECT MODELING IN AN INTEGRATED COMPUTATIONAL MATERIALS ENGINEERING APPROACH

To accelerate the introduction of new cast alloys, the simultaneous modeling and simulation of multiphysical phenomena needs to be considered in the design and optimization of mechanical properties of cast components. The required models related to casting defects, such as microporosity and hot tears, are reviewed. Three aluminum alloys are considered A356, 356 and 319. The data on calculated solidification shrinkage is presented and its effects on microporosity levels discussed. Examples are given for predicting microporosity defects and microstructure distribution for a plate casting. Models to predict fatigue life and yield stress are briefly highlighted here for the sake of completion and to illustrate how the length scales of the microstructure features as well as porosity defects are taken into account for modeling the mechanical properties. Thus, the data on casting defects, including microstructure features, is crucial for evaluating the final performance-related properties of the component. ACKNOWLEDGEMENTS This work was performed under a Cooperative Research and Development Agreement (CRADA) with the Nemak Inc., and Chrysler Co. for the project "High Performance Cast Aluminum Alloys for Next Generation Passenger Vehicle Engines. The author would also like to thank Amit Shyam for reviewing the paper and Andres Rodriguez of Nemak Inc. Research sponsored by the U. S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Vehicle Technologies Office, as part of the Propulsion Materials Program under contract DE-AC05-00OR22725 with UT-Battelle, LLC. Part of this research was conducted through the Oak Ridge National Laboratory's High Temperature Materials Laboratory User Program, which is sponsored by the U. S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Vehicle Technologies Program.

Sabau, Adrian S↗