Buoyancy and solar spin-down
Rapidly rotating solar interior damping by large scale convection analysis via maximum buoyancy force in water cylinder transition
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Rapidly rotating solar interior damping by large scale convection analysis via maximum buoyancy force in water cylinder transition
The author has identified the following significant results. The main landform associations and larger landforms are readily identifiable on the better images and commonly the gross associations of surficial Quaternary deposits also can be differentiated, primarily by information on landforms and soils. Maps showing the Quaternary geologic-terrain units that can be differentiated from the ERTS-1 images are being prepared for study areas in Illinois, Iowa, Missouri, Kansas, Nebraska, and South Dakota. Preliminary maps at 1:1 million scale are given of two of the study areas, the Peoria and Decatur, Illinois, 1 deg x 2 quadrangles. These maps exemplify the first phase of investigations, which consists of identifying and mapping landform and land use characteristics and geologic-surficial materials directly from ERTS-1 images alone, without input of additional data. These maps shown that commonly the boundaries of geologic-terrain units can be identified more accurately on ERTS-1 images than on topographic maps of 1:250,000 scale. From analysis of drainage patterns, stream-divide relations, and tone and textural variations on the ERTS-1 images, the trends of numerous moraines of Wisconsinan and possibly some of Illinoian age were mapped. In the Peoria study area the trend of a buried valley of the Mississippi River is revealed.
Heating of the neutral atmosphere by auroral particle fluxes and by orthogonal electric fields is responsible for large changes in the thermospheric composition that have been observed by satellite mass spectrometers. Vertical winds of a few meters per second are produced in the region subject to auroral heating; this vertical upwelling drives circulation cells that extend the effects of heating in the auroral region on a global scale. Our analysis focuses on the initial phase of a magnetic storm within the auroral region.
A shear flow aerodynamic theory for steady incompressible flows is presented for both the lifting and non lifting problems. The slow variation of the boundary layer thickness is considered. The slowly varying behavior is treated by using multitime scales. The analysis begins with the elementary wavy wall problem and, through Fourier superpositions over the wave number space, the shear flow equivalents to the aerodynamic transfer functions of classical potential flow are obtained. The aerodynamic transfer functions provide integral equations which relate the wall pressure and the upwash. Computational results are presented for the pressure distribution, the lift coefficient, and the center of pressure travel along a two dimensional flat plate in a shear flow. The aerodynamic load is decreased by the shear layer, compared to the potential flow. The variable thickness shear layer decreases it less than the uniform thickness shear layer based upon equal maximum shear layer thicknesses.
The space shuttle solid rocket booster performance evaluation model (SRB-II) is made up of analytical and functional simulation techniques linked together so that a single pass through the model will predict the performance of the propulsion elements of a space shuttle solid rocket booster. The available options allow the user to predict static test performance, predict nominal and off nominal flight performance, and reconstruct actual flight and static test performance. Options selected by the user are dependent on the data available. These can include data derived from theoretical analysis, small scale motor test data, large motor test data and motor configuration data. The user has several options for output format that include print, cards, tape and plots. Output includes all major performance parameters (Isp, thrust, flowrate, mass accounting and operating pressures) as a function of time as well as calculated single point performance data. The engineering description of SRB-II discusses the engineering and programming fundamentals used, the function of each module, and the limitations of each module.
The experimental oceanographic satellite Seasat-A produced microwave observations of the world's oceans for some three months in the summer of 1978. Study of a small set of the data collected at a time and in the area of intensive conventional surface observations have shown that the technology represented by this satellite can provide useful information on waves, winds and sea surface temperature on a global scale. Further analysis is required to quantitatively assess the potential contribution of satellite height and orbit determination to the study ocean dynamics, but early results are quite encouraging.
The results are presented for investigations on noise overload around the Warszawa-Okecie airport on persons inhabiting the area where it exceeds 100 dB for a single aircraft flight. Of 256 subjects, 91.1 percent complained about aircraft noise overload. In the population studied considerable differences were noted respecting the subjective sensitivity scale. Statistical analysis showed numerous correlations between the individual noise sensitivity threshold and the subject's state of health, age, sex, type of work, etc. At the same time investigations demonstrated various forms and levels of disturbance in the organism for individual subjects and groups. The most frequent complaint was chronic fatigue (68.1 percent), followed by nervousness (36.6 percent), frequent headaches (36.2 percent), hearing disturbances (30.0 percent) and sleep disorders (23.9 percent).
The Seasat Synthetic Aperture Radar (SAR) has proved to be an instrument of great utility in the sensing of ocean conditions on a global scale. An analysis of oceanographic and atmospheric aspects of Seasat data has shown that the features observed in the imagery are linked to ocean phenomena such as storm sources and their resulting swell systems. However, there remains one central problem which has not been satisfactorily solved to date. This problem is related to the accurate measurement of wind-generated ocean wave spectra. Investigations addressing this problem are currently being conducted. The problem has two parts, including the accurate measurement of the image spectra and the inference of actual surface wave spectra from these measurements. A description is presented of the progress made towards solving the first part of the problem, taking into account a digital rather than optical computation of the image transforms.
The development, testing, production activities, and associated costs that were required to produce five-and-one-half advanced-composite stabilizer shipsets for Boeing 737 aircraft are defined and discussed.
During the First Global Atmospheric Research Program (GARP) Global Experiment (FGGE), determinations of temperature and moisture were made from TIROS-N and NOAA-6 satellite infrared and microwave sounding radiance measurements. The data were processed by two methods differing principally in their horizontal resolution. At the National Earth Satellite Service (NESS) in Washington, D.C., the data were produced operationally with a horizontal resolution of 250 km for inclusion in the FGGE Level IIb data sets for application to large-scale numerical analysis and prediction models. High horizontal resolution (75 km) sounding data sets were produced using man-machine interactive methods for the special observing periods of FGGE at the NASA/Goddard Space Flight Center and archived as supplementary Level IIb. The procedures used for sounding retrieval and the characteristics and quality of these thermodynamic observations are given.
Spatially resolved (aproximately 1 arcmin) X-ray maps of the Vela supernova remnant have been constructed in two spectral bands, 0.2-1.0 keV and 0.8-2.0 keV, from a series of 36 separate observations with the Imaging Proportional Counter of the Einstein Observatory. The maps exhibit substantial structure on all angular scales. Spectral analysis shows that the emission from the remnant can be consistently described as thermal radiation from hot gas which is nonuniform in density and temperature, but which is in approximate pressure equilibrium. It is found that p/k is approximately 3-4 x 10 to the 5th/cu cm K. The soft X-ray emission exhibits a high degree of correlation with the optical filamentary structure, in the sense that the most prominent filaments either tightly surround or are coincident with the brightest X-ray regions. This suggests that the softest X-radiation may originate in 'warm' gas which is evaporated from the denser clouds responsible for the optical and ultraviolet filaments. Such an interpretation is quantitatively investigated, and shown to be only marginally consistent with the observations.
A partitioned procedure developed for the efficient solution of control-structure interaction (CSI) problems is presented with emphasis on its computational stability, implementation aspects, and accuracy characteristics. The partitioned CSI procedure proposed here can facilitate the use of large-scale structural analysis for control-structure interaction problems. It is anticipated that real-time CSI simulations will become routine if adequate advances are made in the construction of reduced-order observers and, for some time variant problems, if substantially faster parallel solution procedures for the Riccati equations become available.
The acoustic development of the Energy Efficient Engine combined testing and analysis using scale model rigs and an integrated Core/Low Spool demonstration engine. The scale model tests show that a cut-on blade/vane ratio fan with a large spacing (S/C = 2.3) is as quiet as a cut-off blade/vane ratio with a tighter spacing (S/C = 1.27). Scale model mixer tests show that separate flow nozzles are the noisiest, conic nozzles the quietest, with forced mixers in between. Based on projections of ICLS data the Energy Efficient Engine (E3) has FAR 36 margins of 3.7 EPNdB at approach, 4.5 EPNdB at full power takeoff, and 7.2 EPNdB at sideline conditions.
One of the main goals of the First ISCCP Regional Experiment (FIRE) is obtaining the basic knowledge to better interpret satellite image of clouds on regional and smaller scales. An analysis of a mesoscale circulation phenomenon as observed in hourly FIRE satellite images is presented. Specifically, the phenomenon of interest appeared on satellite images as a group of propagating cloud wavelets located on the edge of a cirrus canopy on the anticylonic side of a strong, upper-level subtropical jet. These wavelets, which were observed between 1300 and 2200 GMT on 25 February 1987, are seen most distinctly in the GOES-West infrared satellite picture at 1800 GMT. The purpose is to document that these wavelets were a manifestation of asymmetric inertial instability. During their lifetime, the wavelets were located over the North American synoptic sounding network, so that the meteorological conditions surrounding their occurrence could be examined. A particular emphasis of the analysis is on the jet streak in which the wavelets were imbedded. The characteristics of the wavelets are examined using hourly satellite imagery. The hypothesis that inertial instability is the dynamical mechanism responsible for generating the observed cloud wavelets was examined. To further substantiate this contention, the observed characteristics of the wavelets are compared to, and found to be consistent with, a theoretical model of inertia instability by Stevens and Ciesielski.
Static oxidation kinetics of the super-alpha 2 titanium-aluminide alloy Ti-25Al-10Nb-3V-1Mo (at. percent) were investigated in air over the temperature range of 650 to 1000 C using thermogravimetric analysis. The oxidation kinetics were complex at all exposure temperatures and displayed up to three distinct oxidation rates. Breakaway oxidation occurred after long exposure times at high temperatures. Oxidation products were determined using x ray diffraction techniques, electron microprobe analysis, and energy dispersive x ray analysis. Oxide scale morphology was examined by scanning electron microscopy of the surfaces and cross sections of oxidized specimens. The oxides during the parabolic stages were compact and multilayered, consisting primarily of TiO2 doped with Nb, a top layer of Al2O3, and a thin bottom layer of TiN. The transition between the second and third parabolic stage was found to be linked to the formation of a TiAl layer at the oxide-metal interface. Porosity was formed during the third stage, causing degradation of the oxide and the beginning of breakaway oxidation.
Satellites acquire information on a global and repetitive basis. They are thus ideal tools for use when global scale and analysis over time is required. Data from satellites comes in digital form which means that it is ideally suited for incorporation in digital data bases and that it can be evaluated using automated techniques. The development of a global multi-source data set which integrates digital information is proposed regarding some 15,000 major industrial sites worldwide with remotely sensed images of the sites. The resulting data set would provide the basis for a wide variety of studies of the global economy. The preliminary results give promise of a new class of global policy model which is far more detailed and helpful to local policy makers than its predecessors. The central thesis of this proposal is that major industrial sites can be identified and their utilization can be tracked with the aid of satellite images.
This paper studies the intraseasonal oscillation of convection and related variables in the Southern Hemisphere tropics utilizing European Centre for Medium-range Weather Forecasts analyses of 1984 to 1986. One aspect of the research was that the original, unfiltered, time series of various variables was first analyzed to determine if a statistically significant signal occurred on the intraseasonal time scale. The analysis showed that two variables, outgoing longwave radiation and velocity potential at 200 hPa, provided the best evidence of an intraseasonal oscillation. The oscillation propagated eastward, and the convective activity for both years was more intense over the Indian Ocean-Indonesia-western Pacific region than elsewhere.
A Choleski method is described and used to solve linear systems of equations that arise in large scale structural analysis. The method uses a novel variable-band storage scheme and is structured to exploit fast local memory caches while minimizing data access delays between main memory and vector registers. Several parallel implementations of this method are described for the CRAY-2 and CRAY Y-MP computers demonstrating the use of microtasking and autotasking directives. A portable parallel language, FORCE, is used for comparison with the microtasked and autotasked implementations. Results are presented comparing the matrix factorization times for three representative structural analysis problems from runs made in both dedicated and multi-user modes on both computers. CPU and wall clock timings are given for the parallel implementations and are compared to single processor timings of the same algorithm.