Search NASA⌕ Search

SEARCH · Search NASA

Results for “Synthesis Design”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Pulse Electrodeposition of Cu-ZnO and Mn-Cu-ZnO Nanowires

Cu–ZnO and Mn–Cu–ZnO nanowires are attractive catalysts for alcohol synthesis from CO hydrogenation reactions. Nanowire alloys are pulse electrodeposited into track etched polycarbonate membranes using aqueous electrolytes including Mn(NO 3 ) 2 , Cu(NO 3 ) 2 , Zn(NO 3 ) 2 , and NH 4 NO 3 . Pulse waveforms with a cathodic current density of 50.7mAcm -2 for 50 ms (on-time), with varying off-times (400, 500, and 600 ms), are used to fabricate nanowire arrays (400 nm diameter, 25μm long, and pore density of 1.5×10 8 pores cm -2 ). Pulse waveforms allow significantly higher copper concentrations and better control of zinc and manganese concentrations within nanowires. X-ray diffraction results show preferential growth in the (111) direction and crystallite size increases with an increase in off-time. Waveforms with longer off-times (500 and 600 ms) resulted in nanowires with relatively higher copper concentrations due to improved copper transport in nanopores. The nanowire surface has no manganese; however, the core shows manganese, which increases with the decrease in off-time. The effect of deposition conditions and electrolyte composition on nanowire properties are explained and discussed.

36 MATERIALS SCIENCE↗

Formic Acid Decomposition on Au catalysts: DFT, Microkinetic Modeling, and Reaction Kinetics Experiments

A combined theoretical and experimental approach is presented that uses a comprehensive mean-field microkinetic model, reaction kinetics experiments, and scanning transmission electron microscopy imaging to unravel the reaction mechanism and provide insights into the nature of active sites for formic acid (HCOOH) decomposition on Au/SiC catalysts. All input parameters for the microkinetic model are derived from periodic, self-consistent, generalized gradient approximation (GGA-PW91) density functional theory calculations on the Au(111), Au(100), and Au(211) surfaces and are subsequently adjusted to describe the experimental HCOOH decomposition rate and selectivity data. It is shown that the HCOOH decomposition follows the formate (HCOO) mediated path, with 100% selectivity toward the dehydrogenation products (CO21H2) under all reaction conditions. An analysis of the kinetic parameters suggests that an Au surface in which the coordination number of surface Au atoms is 4 may provide a better model for the active site of HCOOH decomposition on these specific supported Au catalysts.

active sites↗

Water Adsorption in Porous Metal-Organic Frameworks and Related Materials

Water adsorption in porous materials is important for many applications such as dehumidification, thermal batteries, and delivery of drinking water in remote areas. In this study, we have identified three criteria for achieving high performing porous materials for water adsorption. These criteria deal with condensation pressure of water in the pores, uptake capacity, and recyclability and water stability of the material. In search of an excellently performing porous material, we have studied and compared the water adsorption properties of 23 materials, 20 of which are metal organic frameworks (MOFs). Among the MOFs are 10 zirconium(IV) MOFs with a subset of these, MOF-801-SC (single crystal form), -802, -805, -806, -808, -812, and -841 reported for the first time. MOF-801-P (microcrystalline powder form) was reported earlier and studied here for its water adsorption properties. MOF-812 was only made and structurally characterized but not examined for water adsorption because it is a byproduct of MOF-841 synthesis. All the new zirconium MOFs are made from the Zr6O4(OH)(4)(-CO2)(n) secondary building units (n = 6, 8, 10, or 12) and variously shaped carboxyl organic linkers to make extended porous frameworks. The permanent porosity of all 23 materials was confirmed and their water adsorption measured to reveal that MOF-801-P and MOF-841 are the highest performers based on the three criteria stated above; they are water stable, do not lose capacity after five adsorption/desorption cycles, and are easily regenerated at room temperature. An X-ray single-crystal study and a powder neutron diffraction study reveal the position of the water adsorption sites in MOF-801 and highlight the importance of the intermolecular interaction between adsorbed water molecules within the pores.

Furukawa, H↗

Carborane-Based Metal-Organic Framework with High Methane and Hydrogen Storage Capacities

A Cu-carborane-based metal organic framework (MOF), NU-135, which contains a quasi-spherical para-carborane moiety, has been synthesized and characterized. NU-135 exhibits a pore volume of 1.02 cm(3)/g and a gravimetric BET surface area of ca. 2600 m(2)/g, and thus represents the first highly porous carborane-based MOF. As a consequence of the, unique geometry of the carborane unit, NU-135 has a very high volumetric BET surface area of ca. 1900 m(2)/cm(3). CH4, CO2, and H-2 adsorption isotherms were measured over a broad range of pressures and temperatures and are in good agreement with computational predictions. The methane storage capacity of NU-135 at 35 bar and 298 K is ca. 187 v(STP)/v. At 298 K, the pressure required to achieve a methane storage density comparable to that of a compressed natural gas (CNG) tank pressurized to 212 bar, which is a typical storage pressure, is only 65 bar. The methane working capacity (5-65 bar) is 170 v(STP)/v. The volumetric hydrogen storage capacity at 55 bar and 77 K is 49 g/L. These properties are comparable to those of current record holders in the area of methane and hydrogen storage. This initial example lays the groundwork for carborane-based materials with high surface areas.

Kennedy, RD↗

Asymmetric cation nonstoichiometry in spinels: Site occupancy in Co{sub 2}ZnO{sub 4} and Rh{sub 2}ZnO{sub 4}

Two cations A and B in A{sub 2}BO{sub 4} spinels appear in precise 2:1 Daltonian ratio ('line compounds') only at very low temperature. More typically, at finite temperature, they tend to become either A rich or B rich. Here we survey the experimentally observed stoichiometry asymmetries and describe the first-principles framework for calculating these. Defect calculations based on first principles are used to calculate the enthalpies of substitution of A atom {Delta}H(A{sub T{sub d}}) and B atom {Delta}H(B{sub O{sub h}}) and determine their site occupancies leading to (non)-stoichiometry. In Co{sub 2}ZnO{sub 4}, the result of the calculation for site occupancy compares well with that measured via anomalous x-ray diffraction. Further, the calculated phase boundary also compares well with that measured via Rietveld refinement of x-ray diffraction data on bulk ceramic sintered samples of Co{sub 2}ZnO{sub 4} and Rh{sub 2}ZnO{sub 4}. These results show that Co{sub 2}ZnO{sub 4} is heavily Co nonstoichiometric above 500 deg. C, whereas Rh{sub 2}ZnO{sub 4} is slightly Zn nonstoichiometric. We found that, in general, the calculated {Delta}H(A{sub T{sub d}}) is smaller than {Delta}H(B{sub O{sub h}}), if the A-rich competing phase is isostructural with the A{sub 2}BO{sub 4} host, for example, A{sub 2}AO{sub 4}, whereas B-rich competing phase is not, for example, BO. This observation is used to qualitatively explain nonstoichiometry and solid solutions observed in other spinels.

36 MATERIALS SCIENCE↗