Search NASA⌕ Search

SEARCH · Search NASA

Results for “acceleration factor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Production of the X(3872) at the Tevatron and the LHC

We predict the differential cross sections for production of the X(3872) at the Tevatron and the Large Hadron Collider from both prompt QCD mechanisms and from decays of b hadrons. The prompt cross section is calculated using the nonrelativistic QCD (NRQCD) factorization formula. Simplifying assumptions are used to reduce the nonperturbative parameters to a single nonrelativistic QCD matrix element that is determined from an estimate of the prompt cross section at the Tevatron. For X(3872) with transverse momenta greater than about 4 GeV, the predicted cross section is insensitive to the simplifying assumptions. We also discuss critically a recent analysis that concluded that the prompt production rate at the Tevatron is too large by orders of magnitude for the X(3872) to be a weakly bound charm-meson molecule. We point out that if charm-meson rescattering is properly taken into account, the upper bound is increased by orders of magnitude and is compatible with the observed production rate at the Tevatron.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Model-independent determination of the astrophysical S factor in laser-induced fusion plasmas

In this paper, we present a new and general method for measuring the astrophysical S factor of nuclear reactions in laser-induced plasmas and we apply it to 2 H(d,n) 3 He. The experiment was performed with the Texas Petawatt Laser, which delivered 150–270 fs pulses of energy ranging from 90 to 180 J to D 2 or CD 4 molecular clusters (where D denotes 2 H). After removing the background noise, we used the measured time-of-flight data of energetic deuterium ions to obtain their energy distribution. We derive the S factor using the measured energy distribution of the ions, the measured volume of the fusion plasma, and the measured fusion yields. This method is model independent in the sense that no assumption on the state of the system is required, but it requires an accurate measurement of the ion energy distribution, especially at high energies, and of the relevant fusion yields. In the 2 H(d,n) 3 He and 3 He(d,p) 4 He cases discussed here, it is very important to apply the background subtraction for the energetic ions and to measure the fusion yields with high precision. While the available data on both ion distribution and fusion yields allow us to determine with good precision the S factor in the d+d case (lower Gamow energies), for the d+ 3 He case the data are not precise enough to obtain the S factor using this method. Our results agree with other experiments within the experimental error, even though smaller values of the S factor were obtained. This might be due to the plasma environment differing from the beam target conditions in a conventional accelerator experiment.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Absolute acceleration measurements on STS-50 from the Orbital Acceleration Research Experiment (OARE)

Orbital Acceleration Research Experiment (OARE) data on Space Transportation System (STS)-50 have been examined in detail during a 2-day time period. Absolute acceleration levels have been derived at the OARE location, the orbiter center-of-gravity, and at the STS-50 spacelab Crystal Growth Facility. During the interval, the tri-axial OARE raw telemetered acceleration measurements have been filtered using a sliding trimmed mean filter in order to remove large acceleration spikes (e.g., thrusters) and reduce the noise. Twelve OARE measured biases in each acceleration channel during the 2-day interval have been analyzed and applied to the filtered data. Similarly, the in situ measured x-axis scale factors in the sensor's most sensitive range were also analyzed and applied to the data. Due to equipment problem(s) on this flight, both y- and z-axis sensitive range scale factors were determined in a separate process using orbiter maneuvers and subsequently applied to the data. All known significant low-frequency corrections at the OARE location (i.e., both vertical and horizontal gravity-gradient, and rotational effects) were removed from the filtered data in order to produce the acceleration components at the orbiter center-of-gravity, which are the aerodynamic signals along each body axis. Results indicate that there is a force being applied to the Orbiter in addition to the aerodynamic forces. The OARE instrument and all known gravitational and electromagnetic forces have been reexamined, but none produces the observed effect. Thus, it is tentatively concluded that the orbiter is creating the environment observed. At least part of this force is thought to be due to the Flash Evaporator System.

Blanchard, Robert C.↗

Development of C{sup 6+} laser ion source and RFQ linac for carbon ion radiotherapy

A prototype C{sup 6+} injector using a laser ion source has been developed for a compact synchrotron dedicated to carbon ion radiotherapy. The injector consists of a laser ion source and a 4-vane radio-frequency quadrupole (RFQ) linac. Ion beams are extracted from plasma and directly injected into the RFQ. A solenoid guides the low-energy beams into the RFQ. The RFQ is designed to accelerate high-intensity pulsed beams. A structure of monolithic vanes and cavities is adopted to reduce its power consumption. In beam acceleration tests, a solenoidal magnetic field set between the laser ion source and the RFQ helped increase both the peak currents before and after the RFQ by a factor of 4.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Adaptive matching of the iota ring linear optics for space charge compensation

Many present and future accelerators must operate with high intensity beams when distortions induced by space charge forces are among major limiting factors. Betatron tune depression of above approximately 0.1 per cell leads to significant distortions of linear optics. Many aspects of machine operation depend on proper relations between lattice functions and phase advances, and can be i proved with proper treatment of space charge effects. We implement an adaptive algorithm for linear lattice re matching with full account of space charge in the linear approximation for the case of Fermilab’s IOTA ring. The method is based on a search for initial second moments that give closed solution and, at the same predefined set of goals for emittances, beta functions, dispersions and phase advances at and between points of interest. Iterative singular value decomposition based technique is used to search for optimum by varying wide array of model parameters

43 PARTICLE ACCELERATORS↗

SCALED ELECTRON MODEL OF A DOGBONE MUON RLA WITH MULTI-PASS ARCS

The design of a dogbone RLA with linear-field multi-pass arcs was earlier developed for accelerating muons in a Neutrino Factory and a Muon Collider. It allows for efficient use of expensive RF while the multi-pass arc design based on linear combined-function magnets exhibits a number of advantages over separate-arc or pulsed-arc designs. Such an RLA may have applications going beyond muon acceleration. This paper describes a possible straightforward test of this concept by scaling a GeV scale muon design for electrons. Scaling muon momenta by the muon-to-electron mass ratio leads to a scheme, in which a 4.5 MeV electron beam is injected at the middle of a 3 MeV/pass linac with two double-pass return arcs and is accelerated to 18 MeV in 4.5 passes. All spatial dimensions including the orbit distortion are scaled by a factor of 7.5, which arises from scaling the 200 MHz muon RF to a readily available at CEBAF 1.5 GHz. The footprint of a complete RLA fits in an area of 25 by 7 m. The scheme utilizes only fixed magnetic fields including injection and extraction. The hardware requirements are not very demanding, making it straightforward to implement. In this report, we have shown first of all that measuring the energy spectrum of the fast neutrons in the liquid scintillators allows one to distinguish the two chemical forms of plutonium. In addition, combining this information with the Feynman 2-neutron and 3-neutron correlations allows one to extract the {alpha}-ratio without explicitly knowing the multiplication. Given the {alpha}-ratio one can then extract the multiplication as well as the {sup 239}Pu and {sup 240}Pu masses directly from the moment equations.

43 PARTICLE ACCELERATORS↗

Intestinal anastomotic injury alters spatially defined microbiome composition and function

When diseased intestine (i.e., from colon cancer, diverticulitis) requires resection, its reconnection (termed anastomosis) can be complicated by non-healing of the newly joined intestine resulting in spillage of intestinal contents into the abdominal cavity (termed anastomotic leakage). Furthermore, while it is suspected that the intestinal microbiota have the capacity to both accelerate and complicate anastomotic healing, the associated genotypes and functions have not been characterized. As a result, using 16S rRNA amplicon sequencing of samples collected on the day of surgery (postoperative day 0 (POD0)) and the 6th day following surgery (postoperative day 0 (POD6)), we analyzed the changes in luminal versus tissue-associated microbiota at anastomotic sites created in the colon of rats. Results indicated that anastomotic injury induced significant changes in the anastomotic tissue-associated microbiota with minimal differences in the luminal microbiota. The most striking difference was a 500-fold and 200-fold increase in the relative abundance of Enterococcus and Escherichia/Shigella , respectively. Functional profiling predicted the predominance of bacterial virulence-associated pathways in post-anastomotic tissues, including production of hemolysin, cytolethal toxins, fimbriae, invasins, cytotoxic necrotizing factors, and coccolysin. Taken together, our results suggest that compositional and functional changes accompany anastomotic tissues and may potentially accelerate or complicate anastomotic healing.

16S rRNA↗

G-BAND AND HARD X-RAY EMISSIONS OF THE 2006 DECEMBER 14 FLARE OBSERVED BY HINODE/SOT AND RHESSI

We report on G-band emission observed by the Solar Optical Telescope on board the Hinode satellite in association with the X1.5-class flare on 2006 December 14. The G-band enhancements originate from the footpoints of flaring coronal magnetic loops, coinciding with nonthermal hard X-ray bremsstrahlung sources observed by the Reuven Ramaty High Energy Solar Spectroscopic Imager. At the available 2 minute cadence, the G-band and hard X-ray intensities are furthermore well correlated in time. Assuming that the G-band enhancements are continuum emission from a blackbody, we derived the total radiative losses of the white-light flare (white-light power). If the G-band enhancements additionally have a contribution from lines, the derived values are overestimates. We compare the white-light power with the power in hard X-ray producing electrons using the thick-target assumption. Independent of the cutoff energy of the accelerated electron spectrum, the white-light power and the power of accelerated electrons are roughly proportional. Using the observed upper limit of {approx}30 keV for the cutoff energy, the hard X-ray producing electrons provide at least a factor of 2 more power than needed to produce the white-light emission. For electrons above 40 keV, the powers roughly match for all four of the time intervals available during the impulsive phase. Hence, the flare-accelerated electrons contain enough energy to produce the white-light flare emissions. The observed correlation in time, space, and power strongly suggests that electron acceleration and white-light production in solar flares are closely related. However, the results also call attention to the inconsistency in apparent source heights of the hard X-ray (chromosphere) and white-light (upper photosphere) sources.

79 ASTRONOMY AND ASTROPHYSICS↗

Correcting Magnetic-Field Diffusion Effects in Beam Position Monitors

Beam position monitors (BPMs) provide timeresolved measurements of the current and centroid position of high-current electron beams in linear induction accelerators (LIAs). The data from some types of BPMs can be influenced by magnetic field diffusion into the surrounding metal. We derive an estimate of the correction factor from first principles, and show how it is applied in practice to nearly eliminate the effect from the data.

43 PARTICLE ACCELERATORS↗

High-$Q_0$ treatment of CEBAF 1.5 GHz SRF cavities

The Continuous Electron Beam Accelerator Facility (CEBAF) was the first large-scale accelerator to employ superconducting radiofrequency (SRF) cavities for continuous-wave operation. Ongoing research and development efforts continue to focus on increasing the intrinsic quality factor (Q 0 ) of these cavities in order to reduce cryogenic losses while maintaining operational gradients. Here, in this work, we report on the application of high-Q 0 surface treatments to single-cell and multicell C100 and C75 style 1.5 GHz niobium cavities used in the CEBAF accelerator. Nitrogen infusion and oxygen alloying via medium-temperature baking were applied under heat-treatment constraints relevant to existing cavity hardware. Both processes yielded substantial improvements in Q 0 at moderate accelerating gradients, achieving values of approximately 2 × 10 10 at 2.07 K and 20 MV/m. The effectiveness of nitrogen infusion at reduced annealing temperatures and the successful extension of oxygen alloying to multicell cavities are demonstrated. These results establish viable pathways for implementing high-Q 0 treatments in CEBAF-compatible cavities and support future integration into cryomodules for reduced operational cryogenic load.

Dhakal, Pashupati [Thomas Jefferson National Accel↗

Electron density and plasma dynamics of a colliding plasma experiment

We present experimental results of two head-on colliding plasma sheaths accelerated by pulsed-power-driven coaxial plasma accelerators. The measurements have been performed in a small vacuum chamber with a neutral-gas prefill of ArH{sub 2} at gas pressures between 17 Pa and 400 Pa and load voltages between 4 kV and 9 kV. As the plasma sheaths collide, the electron density is significantly increased. The electron density reaches maximum values of ≈8 ⋅ 10{sup 15} cm{sup −3} for a single accelerated plasma and a maximum value of ≈2.6 ⋅ 10{sup 16} cm{sup −3} for the plasma collision. Overall a raise of the plasma density by a factor of 1.3 to 3.8 has been achieved. A scaling behavior has been derived from the values of the electron density which shows a disproportionately high increase of the electron density of the collisional case for higher applied voltages in comparison to a single accelerated plasma. Sequences of the plasma collision have been taken, using a fast framing camera to study the plasma dynamics. These sequences indicate a maximum collision velocity of 34 km/s.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fermi acceleration in relativistic collisionless plasma shocks correlates with anisotropic energy gains

Collisionless shocks generated by two colliding relativistic electron-positron plasma shells are studied using particle-in-cell simulations. Shocks are mediated by the Weibel instability (WI), and the kinetic energy of the fastest accelerated particles is found to be anisotropically modified by WI-induced electric fields. Specifically, we show that all particles interacting with the shock bifurcate into two groups based on their final relativistic Lorentz factor γ: slow (γ < γ bf ) and fast (γ < γ bf ), where γ bf is the bifurcation Lorentz factor that was found to be approximately twice the initial (upstream) Lorentz factor γ0. We have found that the kinetic energies of the slow particles are equally affected by the longitudinal and transverse components of the shock electric field, whereas the fast particles are primarily accelerated by the transverse field component.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Cross sections for the exclusive photon electroproduction on the proton and Generalized Parton Distributions

Unpolarized and beam-polarized four-fold cross sections $\frac{d^4 \sigma}{dQ^2 dx_B dt d\phi}$ for the $ep\to e^\prime p^\prime \gamma$ reaction were measured using the CLAS detector and the 5.75-GeV polarized electron beam of the Jefferson Lab accelerator, for 110 ($Q^2,x_B,t$) bins over the widest phase space ever explored in the valence-quark region. Several models of Generalized Parton Distributions (GPDs) describe the data well at most of our kinematics. This increases our confidence that we understand the GPD $H$, expected to be the dominant contributor to these observables. Thus, through a leading-twist extraction of Compton Form Factors, these results reveal a tomographic image of the nucleon.

43 PARTICLE ACCELERATORS↗

Azimuthal asymmetries for hadron distributions inside a jet in hadronic collisions

Using a generalized parton model approach including spin and intrinsic parton motion effects, and assuming the validity of factorization for large-p{sub T} jet production in hadronic collisions, we study the azimuthal distribution around the jet axis of leading unpolarized or (pseudo)scalar hadrons, namely pions, produced in the jet fragmentation process. We identify the observable leading-twist azimuthal asymmetries for the unpolarized and single-polarized case related to quark and gluon-originated jets. We account for all physically allowed combinations of the transverse momentum-dependent (TMD) parton distribution and fragmentation functions, with special attention to the Sivers, Boer-Mulders, and transversity quark distributions, and to the Collins fragmentation function for quarks (and to the analogous functions for gluons). For each of these effects we evaluate, at central and forward rapidities and for kinematical configurations accessible at BNL-RHIC, the corresponding potentially maximized asymmetry (for {pi}{sup +} production), obtained by saturating natural positivity bounds (and the Soffer bound for transversity) for the distribution and fragmentation functions involved and summing additively all partonic contributions. We then estimate, for both neutral and charged pions, the asymmetries involving TMD functions for which parametrizations are available. We also study the role of the different mechanisms, and the corresponding transverse single-spin asymmetries, for large-p{sub T} inclusive-jet production.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The Muon Accelerator Program

Multi-TeV Muon Colliders and high intensity Neutrino Factories have captured the imagination of the particle physics community. These new types of facility both require an advanced muon source capable of producing O(10{sup 21}) muons per year. The muons must be captured within bunches, and their phase space manipulated so that they fit within the acceptance of an accelerator. In a Neutrino Factory (NF), muons from this 'front end' are accelerated to a few GeV or a few tens of GeV, and then injected into a storage ring with long straight sections. Muon decays in the straight sections produce an intense neutrino beam. In a Muon Collider (MC) the muons must be cooled by a factor O(10{sup 6}) to produce beams that are sufficiently bright to give high luminosity in the collider. Bunches of positive and negative muons are then accelerated to high energy, and injected in opposite directions into a collider ring in which they collide at one or more interaction points. Over the last decade our understanding of the concepts and technologies needed for Muon Colliders and Neutrino Factories has advanced, and it is now believed that, within a few years, with a well focused R&D effort (i) a Neutrino Factory could be proposed, and (ii) enough could be known about the technologies needed for a Muon Collider to assess the feasibility and cost of this new type of facility, and to make a detailed plan for the remaining R&D. Although these next NF and MC steps are achievable, they are also ambitious, and will require an efficient and dedicated organization to accomplish the desired goals with limited resources. The Muon Accelerator Program (MAP) has recently been created to propose and execute this R&D program.

43 PARTICLE ACCELERATORS↗

A Resonant Cavity Approach to Non-Invasive, Pulse-to-Pulse EmittanceMeasurement

We present a resonant cavity approach for non-invasive, pulse-to-pulse, beam emittance measurements of non-circular multi-bunch beams. In a resonant cavity, desired field components can be enhanced up to Q{sub L{lambda}}/{pi}, where Q{sub L{lambda}} is the loaded quality factor of the resonant mode {lambda}, when the cavity resonant mode matches the bunch frequency of a bunch-train beam pulse. In particular, a quad-cavity, with its quadrupole mode (TM{sub 220} for rectangular cavities) at beam operating frequency, rotated 45{sup o} with respect to the beamline, extracts the beam quadrupole moment exclusively, utilizing the symmetry of the cavity and some simple networks to suppress common modes. Six successive beam quadrupole moment measurements, performed at different betatron phases in a linear transport system determine the beam emittance, i.e. the beam size and shape in the beam's phase space, if the beam current and position at these points are known. In the presence of x-y beam coupling, ten measurements are required. One measurement alone provides the rms-beam size of a large aspect ratio beam. The resolution for such a measurement of rms-beam size with the rectangular quad-cavity monitor presented in this article is estimated to be on the order of ten microns. A prototype quad-cavity was fabricated and preliminary beam tests were performed at the Next Linear Collider Test Accelerator (NLCTA) at the Stanford Linear Accelerator Center (SLAC). Results were mainly limited by beam jitter and uncertainty in the beam position measurement at the cavity location. This motivated the development of a position-emittance integrated monitor.

43 PARTICLE ACCELERATORS↗

Exclusive production of vector mesons in pp and pp-bar collisions

Protons and antiprotons at collider energies are a source of high energy Weizsaecker-Williams photons. This opens up a possibility to study at the LHC exclusive photoproduction of heavy vector mesons at energies much larger than possible at the HERA accelerator.We present selected results on the production of vector mesons {rho}, {omega}, {phi}, J/{Psi} and {Upsilon}. We show distributions in rapidity, transverse momentum of mesons and azimuthal angle between outgoing protons for RHIC, Tevatron and LHC energies. The absorption effects are discussed.The amplitude for {gamma}p{yields}Vp is calculated in a pQCD k{sub T}-factorization approach with an unintegrated gluon distribution constrained by inclusive deep-inelastic structure function. The total cross section for diffractive meson (virtual) photo-production as a function of energy and photon virtuality is calculated and compared to HERA data. We also discuss the ratio of the first radial excitation state (2S) to the ground state (1S) in diffractive J/{Psi} and {Upsilon} production.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Star-jet Interactions and Gamma-ray Outbursts from 3C454.3

We propose a model to explain the ultra-bright GeV gamma-ray flares observed from the blazar 3C454.3. The model is based on the concept of a relativistic jet interacting with compact gas condensations produced when a star (a red giant) crosses the jet close to the central black hole. The study includes an analytical treatment of the evolution of the envelope lost by the star within the jet, and calculations of the related high-energy radiation. The model readily explains the day-long that varies on timescales of hours, GeV gamma-ray flare from 3C454.3, observed during 2010 November on top of a plateau lasting weeks. In the proposed scenario, the plateau state is caused by a strong wind generated by the heating of the stellar atmosphere due to nonthermal particles accelerated at the jet-star interaction region. The flare itself could be produced by a few clouds of matter lost by the red giant after the initial impact of the jet. In the framework of the proposed scenario, the observations constrain the key model parameters of the source, including the mass of the central black hole: Blackhole Mass is approx. equal to 10(exp 9) Solar Mass, the total jet power: L(j) is approx. equal to 10(exp 48) erg s(exp −1), and the Doppler factor of the gamma-ray emitting clouds: Delta is approx. equal to 20. Whereas we do not specify the particle acceleration mechanisms, the potential gamma-ray production processes are discussed and compared in the context of the proposed model.We argue that synchrotron radiation of protons has certain advantages compared to other radiation channels of directlyaccelerated electrons. An injected proton distribution varies as E(exp −1) or harder below the relevant energies would be favored to alleviate the tight energetic constraints and to avoid the violation of the observational low-energy constraints.

radiation mechanisms↗