Search NASA⌕ Search

SEARCH · Search NASA

Results for “consistent scheme”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Reduction Kinetics of Perovskite Oxides for Selective Hydrogen Combustion in the Context of Olefin Production

Chemical looping represents a novel approach for generating light olefins in which thermal cracking or catalytic dehydrogenation is coupled with selective hydrogen combustion (SHC) by a metal oxide redox catalyst, which enables autothermal operation, increased per-pass conversion, and greater-than-equilibrium yields. Recent studies indicate that Na 2 WO 4 -promoted perovskite oxides are effective redox catalysts with high olefin selectivity. Herein, kinetic parameters, rates, and reaction models for the reduction of unpromoted and Na 2 WO 4 -promoted CaMnO 3 redox catalysts by H 2 , C 2 H 4 , and C 2 H 6 , is reported. Reduction rates of CaMnO 3 under ethylene and ethane are significantly lower than under H 2 . Additionally, model fitting of reduction kinetics show good agreement with reaction order–controlled models for CaMnO 3 reduction and predict greater oxygen site dependence and higher activation energy for CaMnO 3 reduction by C 2 H 4 as compared with H 2 . Avrami–Erofe'ev nucleation and growth models provide the best fit to the reduction of Na 2 WO 4 /CaMnO 3 in H 2 and in C 2 H 4 . After Na 2 WO 4 promotion, the reduction rate of CaMnO 3 is three orders of magnitude lower in ethylene in comparison to hydrogen, consistent with its superior selectivity to hydrogen combustion. The models developed can be applied toward reactor design and optimization in the context of enhanced olefin production via SHC under a cyclic redox scheme.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Accurate and Efficient ab Initio Calculations for Supramolecular Complexes: Symmetry-Adapted Perturbation Theory with Many-Body Dispersion

Symmetry-adapted perturbation theory (SAPT) provides a chemically meaningful energy decomposition scheme for nonbonded interactions that is useful for interpretive purposes. Although formally a dimer theory, we have previously introduced an “extended” version (XSAPT) that incorporates many-body polarization via self-consistent charge embedding. Here, we extend the XSAPT methodology to include nonadditive dispersion, using a modified form of the many-body dispersion (MBD) method of Tkatchenko and co-workers. Dispersion interactions beyond the pairwise atom–atom approximation improve total interaction energies even in small systems, and for large π-stacked complexes these corrections can amount to several kilocalories per mole. The XSAPT+MBD method introduced here achieves errors of ≲1 kcal/mol (as compared to high-level ab initio benchmarks) for the L7 data set of large dispersion-bound complexes and ≲4 kcal/mol (as compared to experiment) for the S30L data set of host–guest complexes. This is superior to the best contemporary density functional methods for noncovalent interactions, at comparable or lower cost. XSAPT+MBD represents a promising method for application to supramolecular assemblies, including protein–ligand binding.

74 ATOMIC AND MOLECULAR PHYSICS↗

Focusing a round coherent beam by spatial filtering the horizontal source

This paper illustrates the use of spatial filtering with a horizontal slit near the source to enlarge the horizontal coherence in an experimental station and produce a diffraction-limited round focus at an insertion device beamline for X-ray photon correlation spectroscopy experiments. Simple expressions are provided to guide the optical layout, and wave propagation simulations confirm their applicability. The two-dimensional focusing performance of Be compound refractive lenses to produce a round diffraction-limited focus at 11 keV capable of generating a high-contrast speckle pattern of an aerogel sample is demonstrated. The coherent scattering patterns have comparable speckle sizes in both horizontal and vertical directions. The focal spot sizes are consistent with hybrid ray-tracing calculations. Producing a two-dimensional focus on the sample can be helpful to resolve speckle patterns with modern pixel array detectors with high visibility. This scheme has now been in use since 2019 for the 8-ID beamline at the Advanced Photon Source, sharing the undulator beam with two separate beamlines, 8-ID-E and 8-ID-I at 7.35 keV, with increased partially coherent flux, reduced horizontal spot sizes on samples, and good speckle contrast.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The Homogeneous Cooling State as a Verification Test for Kinetic Theory-Based Continuum Models of Gas–Solid Flows

Granular and multiphase (gas–solids) kinetic theory-based models have emerged a leading modeling strategy for the simulation of particle flows. Similar to the Navier–Stokes equations of single-phase flow, although substantially more complex, kinetic theory-based continuum models are typically solved with computational fluid dynamic (CFD) codes. Under the assumptions of the so-called homogeneous cooling state (HCS), the governing equations simplify to an analytical solution describing the “cooling” of fluctuating particle velocity, or granular temperature. The HCS is used here to verify the implementation of a recent multiphase kinetic theory-based model in the open source mfix code. In this work, results from the partial verification test show that the available implicit (backward) Euler time integration scheme converges to the analytical solution with the expected first-order rate. A second-order accurate backward differentiation formula (BDF) is also implemented and observed to converge at a rate consistent with its formal accuracy.

Computational fluid dynamics↗

Three-dimensional multiphase segmentation of X-ray CT data of porous materials using a Bayesian Markov random field framework

Advancements in noninvasive imaging methods such as X-ray computed tomography (CT) have led to a recent surge of applications in porous media research with objectives ranging from theoretical aspects of pore-scale fluid and interfacial dynamics to practical applications such as enhanced oil recovery and advanced contaminant remediation. While substantial efforts and resources have been devoted to advance CT technology, microscale analysis, and fluid dynamics simulations, the development of efficient and stable three-dimensional multiphase image segmentation methods applicable to large data sets is lacking. To eliminate the need for wet-dry or dual-energy scans, image alignment, and subtraction analysis, commonly applied in X-ray micro-CT, a segmentation method based on a Bayesian Markov random field (MRF) framework amenable to true three-dimensional multiphase processing was developed and evaluated. Furthermore, several heuristic and deterministic combinatorial optimization schemes required to solve the labeling problem of the MRF image model were implemented and tested for computational efficiency and their impact on segmentation results. Test results for three grayscale data sets consisting of dry glass beads, partially saturated glass beads, and partially saturated crushed tuff obtained with synchrotron X-ray micro-CT demonstrate great potential of the MRF image model for three-dimensional multiphase segmentation. While our results are promising and the developed algorithm is stable and computationally more efficient than other commonly applied porous media segmentation models, further potential improvements exist for fully automated operation.

42 ENGINEERING↗

On a finite-difference method for solving transient viscous flow problems

A method has been developed to solve the unsteady, compressible Navier-Stokes equation with the property of consistency and the ability of minimizing the equation stiffness. It relies on innovative extensions of the state-of-the-art finite-difference techniques and is composed of: (1) the upwind scheme for split-flux and the central scheme for conventional flux terms in the inviscid and viscous regions, respectively; (2) the characteristic treatment of both inviscid and viscous boundaries; (3) an ADI procedure compatible with interior and boundary points; and (4) a scalar matrix coefficient including viscous terms. The performance of this method is assessed with four sample problems; namely, a standing shock in the Laval duct, a shock reflected from the wall, the shock-induced boundary-layer separation, and a transient internal nozzle flow. The results from the present method, an existing hybrid block method, and a well-known two-step explicit method are compared and discussed. It is concluded that this method has an optimal trade-off between the solution accuracy and computational economy, and other desirable properties for analyzing transient viscous flow problems.

Li, C. P.↗

UV laser deposition of metal films by photogenerated free radicals

A novel photochemical method for liquid-phase deposition of metal films is described. In the liquid phase deposition scheme, a metal containing compound and a metal-metal bonded carbonyl complex are dissolved together in a polar solvent and the mixture is irradiated using a UV laser. The optical arrangement consists of a HeCd laser which provides 7 mW of power at a wavelength of 325 nm in the TEM(OO) mode. The beam is attenuated and may be expanded to a diameter of 5-20 mm. Experiments with photochemical deposition of silver films onto glass and quartz substrates are described in detail. Mass spectrometric analysis of deposited silver films indicated a deposition rate of about 1 A/s at incident power levels of 0.01 W/sq cm. UV laser-induced copper and palladium films have also been obtained. A black and white photograph showing the silver Van Der Pauw pattern of a solution-deposited film is provided.

Montgomery, R. K.↗

Nonlinear robust controller design for multi-robot systems with unknown payloads

This work is concerned with the control problem of a multi-robot system handling a payload with unknown mass properties. Force constraints at the grasp points are considered. Robust control schemes are proposed that cope with the model uncertainty and achieve asymptotic path tracking. To deal with the force constraints, a strategy for optimally sharing the task is suggested. This strategy basically consists of two steps. The first detects the robots that need help and the second arranges that help. It is shown that the overall system is not only robust to uncertain payload parameters, but also satisfies the force constraints.

Song, Y. D.↗

Project PARAS: Phased array radio astronomy from space

An orbiting radio telescope is proposed which, when operated in a very long baseline interferometry (VLBI) scheme, would allow higher than currently available angular resolution and dynamic range in the maps and the ability to observe rapidly changing astronomical sources. Using passive phased array technology, the proposed design consists of 656 hexagonal modules forming a 150-m diameter antenna dish. Each observatory module is largely autonomous, having its own photovoltaic power supply and low-noise receiver and processor for phase shifting. The signals received by the modules are channeled via fiber optics to the central control computer in the central bus module. After processing and multiplexing, the data are transmitted to telemetry stations on the ground. The truss frame supporting each observatory panel is a novel hybrid structure consisting of a bottom graphite/epoxy tubular triangle and rigidized inflatable Kevlar tubes connecting the top observatory panel and the bottom triangle. Attitude control and station keeping functions will be performed by a system of momentum wheels in the bus and four propulsion modules located at the compass points on the periphery of the observatory dish. Each propulsion module has four monopropellant thrusters and four hydrazine arcjets, the latter supported by either a photovoltaic array or a radioisotope thermoelectric generator. The total mass of the spacecraft is about 20,500 kg.

Nuss, Kenneth↗

New very large array maps of highly core-dominated BL Lacs: Testing unified schemes

We present high dyanamic range (greater than 10 000:1) Very Large Array (VLA) maps of four highly c ore-dominated BL Lacertae Objects (PKS 0735+178, OJ 287, 1219+285, and PKS 1413+135), all of which had been reported previously as being unresolved at dynamic ranges approximately 1000-3000:1. Three of the four possess low surface brightness kpc-scale structure, with extended power levels and morphologies reasonable for FR 1 radio galaxies. One, however (PKS 1413+135), possesses no extended structure at dynamic range 9600:1. Only one of the sources exhibits aligned Very Large Array (VLA) and VLBI structures, suggesting bends on approximately 100-1000 pc size scales for the other two. As these four have extremely high core-to-extended flux ratios (f approximately 30-5000), they provide an extreme test of unified schemes. By deriving minimum constraints for the beaming angles and Lorentz factors which are required to produce the degrees of core dominance seen, we find that the three extended radio sources are consistent with being beamed FR 1 radio galaxies. PKS 1413+135 remains an anomalous BL Lac Object for several reasons.

Perlman, Eric S.↗

Holographic Compact Disk Read-Only Memories

Compact disk read-only memories (CD-ROMs) of proposed type store digital data in volume holograms instead of in surface differentially reflective elements. Holographic CD-ROM consist largely of parts similar to those used in conventional CD-ROMs. However, achieves 10 or more times data-storage capacity and throughput by use of wavelength-multiplexing/volume-hologram scheme.

Liu, Tsuen-Hsi↗

Analysis of Buzz in a Supersonic Inlet

A dual-stream, low-boom supersonic inlet designed for use on a small, Mach 1.6 aircraft was tested experimentally in the 8- by 6-Foot Supersonic Wind Tunnel (SWT) at the NASA Glenn Research Center (GRC). The tests showed that the inlet had good recovery and stable operation over large mass flow range. The inlet went into buzz at mass flows well below that needed for engine operation, and the experiments generated a wealth of data during buzz. High frequency response pressure measurements and high-speed schlieren videos were recorded for many buzz events. The objective of the present work was to use computational fluid dynamics (CFD) to predict some of the experimental data taken during buzz, compare those predictions to the experimental data, and to use both datasets to explain the physics of the buzz cycle. The calculations were done with the Wind-US CFD code using a second-order time-accurate differencing scheme and the SST turbulence model. Computed Mach number contours were compared with schlieren images, and ensemble-averaged unsteady pressures were compared to data. The results showed that the buzz cycle consisted partly of spike buzz, an unsteady oscillation of the main shock at the spike tip while the inlet pressure dropped, and partly of choked flow while the inlet repressurized. Most of the results could be explained by theory proposed by Dailey in 1954, but did not support commonly used acoustic resonance explanations.

Chima, Rodrick V.↗

Solar vs. Fission Surface Power for Mars

A multi-discipline team of experts from the National Aeronautics and Space Administration (NASA) developed Mars surface power system point design solutions for two conceptual missions. The primary goal of this study was to compare the relative merits of solar- versus fission-powered versions of each surface mission. First, the team compared three different solar power options against a fission power system concept for a sub-scale, uncrewed demonstration mission. The 4.5 meter (m) diameter pathfinder lander's primary mission would be to demonstrate Mars entry, descent, and landing techniques. Once on the Martian surface, the lander's In Situ Resource Utilization (ISRU) payload would demonstrate liquid oxygen propellant production using atmospheric resources. For the purpose of this exercise, location was assumed to be at the Martian equator. The three solar concepts considered included a system that only operated during daylight hours (at roughly half the daily propellant production rate of a round-the-clock fission design), a battery-augmented system that operated through the night (matching the fission concept's propellant production rate), and a system that operated only during daylight, but at a higher rate (again, matching the fission concept's propellant production rate). Including 30% mass growth allowance, total payload masses for the three solar concepts ranged from 1,116 to 2,396 kg, versus the 2,686 kg fission power scheme. However, solar power masses are expected to approach or exceed the fission payload mass at landing sites further from the equator, making landing site selection a key driver in the final power system decision. The team also noted that detailed reliability analysis should be performed on daytime-only solar power schemes to assess potential issues with frequent ISRU system on/off cycling. Next, the team developed a solar-powered point design solution for a conceptual four-crew, 500-day surface mission consisting of up to four landers per crewed expedition mission. Unlike the demonstration mission, a lengthy power outage due to the global dust storms that are known to occur on Mars would pose a safety hazard to a crewed mission. A similar fission versus solar power trade study performed by NASA in 2007 concluded that fission power was more reliable-with a much lower mass penalty-than solar power for this application. However, recent advances in solar cell and energy storage technologies and changes in operational assumptions prompted NASA to revisit the analysis. For the purpose of this exercise a particular landing site at Jezero Crater, located at 18o north latitude, was assumed. A fission power system consisting of four each 10 kW Kilopower fission reactors was compared to a distributed network of Orion-derived Ultraflex solar arrays and Lithium ion batteries mounted on every lander. The team found that a solar power system mass of about 9,800 kg would provide the 22 kilowatts (kW) keep-alive power needed to survive a dust storm lasting up to 120-days at average optical depth of 5, and 35 kW peak power for normal operations under clear skies. Although this is less than half the mass estimated during the 2007 work (which assumed latitudes up to 30o) it is still more than the 7,000 kg mass of the fission system which provides full power regardless of dust storm conditions.

Rucker, Michelle A.↗

A Computationally Efficient Algorithm for Computing Convex Hull Prices

Electricity markets worldwide allow participants to bid non-convex production offers. While non-convex offers can more accurately reflect a resource's capabilities, they create challenges for market clearing processes. For example, system operators may execute side payments when a participant’s cost is not covered through energy sale settlements from locational marginal pricing schemes, or when a participant incurs lost opportunity costs to follow the dispatch signal. Convex hull pricing minimizes these and other types of side payments while providing uniform (i.e., locationally and temporally consistent) prices. However, computing convex hull prices involves solving either a large-scale linear program - which in turn requires explicit descriptions of market participants’ convex hulls -or the Lagrangian dual of the corresponding non-convex scheduling problem. Here, we propose a computationally feasible and industrially scalable Benders decomposition approach to computing convex hull prices at least an order of magnitude faster than the current state-of-the-art while leveraging recent advances in convex hull formulations for thermal generating units.

61 RADIATION PROTECTION AND DOSIMETRY↗

Study on the well-posedness, convergence and the stability of the semi-implicit upwind numerical solver for the multi-fluid model

The well-posedness, convergence and the stability of the two-fluid code has been studied for a long time. Most of the investigations concern the semi-implicit upwind solution scheme for the six equation two-fluid model such as used in RELAP5 3 or TRACE 21. Since the system code, SPACE 2, adopts one more field, a droplet field, it consists of nine equations (3 mass, 3 momentum and 3 energy balance equations) and thus more involved investigations are necessary to confirm the stability and convergence. For this objective, the old issue of the well-posedness, convergence and the stability is revisited and some general guidelines to develop a well-posed numerical multi-fluid model are derived as follows; (1) Hyperbolicity of the corresponding system of partial differential equations is not a necessary condition for the development of a numerical model for multi-phase flow, but whether or not it is hyperbolic can provide guidance relative to initial conditions, boundary conditions, and expected high frequency behavior of the model. (2) A necessary condition for a well-posed numerical model is stability in the von Neumann sense, i.e. growth factor less than 1.0 for the shortest wave-length, 2{Delta}x. (3) The smallest node size used for convergence studies should be of the order of the characteristic dimension of the average description, i.e. smaller nodes can be used so long as they do not result in unphysical growth of wave-lengths less than the characteristic dimension. The usual mathematical definition of convergence i.e. the behavior of the solution as the node size approaches zero, is not appropriate for the discrete averaged numerical model, since there is diminished physical meaning to behavior at wavelengths less than the characteristic dimension of the average description. Under these guidelines, dispersion analysis and von Neumann stability analysis are performed for the three field multi-fluid, semi-implicit, upwind numerical model to show that the necessary conditions for well-posedness are met. To study the non-linear stability and the convergence, various runs with the torus problem using the SPACE code are utilized to confirm the frequency cascading effects that augment non-linear stability. A robust mechanism for the flow regime change is also a very important factor for developing non-linearly stable and convergent code. A open pipe flow problem is also simulated to investigate the non-linear stability effects in a flow geometry more typical of real safety code applications. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

SHOULD ONE USE THE RAY-BY-RAY APPROXIMATION IN CORE-COLLAPSE SUPERNOVA SIMULATIONS?

We perform the first self-consistent, time-dependent, multi-group calculations in two dimensions (2D) to address the consequences of using the ray-by-ray+ transport simplification in core-collapse supernova simulations. Such a dimensional reduction is employed by many researchers to facilitate their resource-intensive calculations. Our new code (Fornax) implements multi-D transport, and can, by zeroing out transverse flux terms, emulate the ray-by-ray+ scheme. Using the same microphysics, initial models, resolution, and code, we compare the results of simulating 12, 15, 20, and 25 M {sub ⊙} progenitor models using these two transport methods. Our findings call into question the wisdom of the pervasive use of the ray-by-ray+ approach. Employing it leads to maximum post-bounce/pre-explosion shock radii that are almost universally larger by tens of kilometers than those derived using the more accurate scheme, typically leaving the post-bounce matter less bound and artificially more “explodable.” In fact, for our 25 M {sub ⊙} progenitor, the ray-by-ray+ model explodes, while the corresponding multi-D transport model does not. Therefore, in two dimensions, the combination of ray-by-ray+ with the axial sloshing hydrodynamics that is a feature of 2D supernova dynamics can result in quantitatively, and perhaps qualitatively, incorrect results.

79 ASTRONOMY AND ASTROPHYSICS↗

Multiresolution Wavelet Based Adaptive Numerical Dissipation Control for Shock-Turbulence Computations

The recently developed essentially fourth-order or higher low dissipative shock-capturing scheme of Yee, Sandham and Djomehri (1999) aimed at minimizing nu- merical dissipations for high speed compressible viscous flows containing shocks, shears and turbulence. To detect non smooth behavior and control the amount of numerical dissipation to be added, Yee et al. employed an artificial compression method (ACM) of Harten (1978) but utilize it in an entirely different context than Harten originally intended. The ACM sensor consists of two tuning parameters and is highly physical problem dependent. To minimize the tuning of parameters and physical problem dependence, new sensors with improved detection properties are proposed. The new sensors are derived from utilizing appropriate non-orthogonal wavelet basis functions and they can be used to completely switch to the extra numerical dissipation outside shock layers. The non-dissipative spatial base scheme of arbitrarily high order of accuracy can be maintained without compromising its stability at all parts of the domain where the solution is smooth. Two types of redundant non-orthogonal wavelet basis functions are considered. One is the B-spline wavelet (Mallat & Zhong 1992) used by Gerritsen and Olsson (1996) in an adaptive mesh refinement method, to determine regions where re nement should be done. The other is the modification of the multiresolution method of Harten (1995) by converting it to a new, redundant, non-orthogonal wavelet. The wavelet sensor is then obtained by computing the estimated Lipschitz exponent of a chosen physical quantity (or vector) to be sensed on a chosen wavelet basis function. Both wavelet sensors can be viewed as dual purpose adaptive methods leading to dynamic numerical dissipation control and improved grid adaptation indicators. Consequently, they are useful not only for shock-turbulence computations but also for computational aeroacoustics and numerical combustion. In addition, these sensors are scheme independent and can be stand alone options for numerical algorithm other than the Yee et al. scheme.

Sjoegreen, B.↗

Similarity renormalization group evolution of chiral effective nucleon-nucleon potentials in the subtracted kernel method approach

Research Highlights: > We study the similarity renormalization group evolution of chiral NN potentials. > We evolve an effective potential derived using a subtractive renormalization scheme. > Unitarity of the SRG evolution is verified within the subtractive scheme. > High- and low-momentum components decouple for the SRG evolved potential. - Abstract: Methods based on Wilson's renormalization group have been successfully applied in the context of nuclear physics to analyze the scale dependence of effective nucleon-nucleon (NN) potentials, as well as to consistently integrate out the high-momentum components of phenomenological high-precision NN potentials in order to derive phase-shift equivalent softer forms, the so called V{sub low-k} potentials. An alternative renormalization group approach that has been applied in this context is the similarity renormalization group (SRG), which is based on a series of continuous unitary transformations that evolve hamiltonians with a cutoff on energy differences. In this work we study the SRG evolution of a leading order (LO) chiral effective NN potential in the {sup 1}S{sub 0} channel derived within the framework of the subtracted kernel method (SKM), a renormalization scheme based on a subtracted scattering equation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗