Search NASA⌕ Search

SEARCH · Search NASA

Results for “data dependencies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

High temperature stability and transport characteristics of hydrogen in alumina via multiscale computation

Here, the impact of hydrogen charge states on the stability and transport characteristics of hydrogen interstitials in alumina polymorphs is evaluated by multiscale computational methods including density functional theory (DFT), ab initio molecular dynamics (AIMD) and machine learned force fields. Thermodynamic calculations show that the protonic H i +1 interstitial is the most stable defect species for most values of the electronic bandgap in both and amorphous alumina (Al 2 O 3 ). Further, active learned Gaussian approximation potentials (GAP) were developed using AIMD data to study temperature dependent long time proton diffusion in alumina. Diffusivity calculations from GAP-MD simulations are found to be comparable with of the AIMD data, while being ~340 times faster and scalable to larger systems. Comparisons with diffusivity values for other interstitial charge states (H i 0 and H i -1 ) and published experimental literature indicate that H i +1 diffusion is the likely mechanism of hydrogen transport. A good agreement is obtained between H i +1 diffusivity calculated in α-Al 2 O 3 from DFT: 5.05 10 -3 exp(-0.81 eV/k B /T) cm 2 /s and reported experiment: 9.7X10 -4 exp(-0.83 eV/k B /T) cm 2 /s. Computationally and experimentally calculated energy barriers (0.81 and 0.83 eV respectively) only differ by 2.5%. Similarly, the pre-exponential diffusion coefficients only differ by 0.5 orders of magnitude. Moreover, the diffusivity of H i +1 in amorphous Al 2 O 3 in the 1000–2000 K range is calculated to be 2.53X10 -2 exp(-0.89 eV/k B /T), just one order of magnitude higher than the corresponding value in α-Al 2 O 3 . This suggests that local structural disorder does not significantly affect the energy landscape and diffusion behavior of H i +1 in Al 2 O 3 . Overall, these results show promise for the application of alumina polymorphs as hydrogen permeation barriers.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Measuring the NuMI Beam Flux for MINERvA

MINERvA is employing multiple tools to understand its neutrino beam flux. We utilize external hadron production data, but we also depend heavily on in situ techniques in which we reduce our hadron production uncertainties by tuning our Monte Carlo to both MINERvA detector data and muon monitor data.

43 PARTICLE ACCELERATORS↗

Machine learning-based inversion for acoustic impedance with large synthetic training data: Workflow and data characterization

Where wells are sparse or training data are difficult to label with high-quality wireline-derived impedance logs, machine learning (ML)-based inversion of acoustic impedance typically depends on small training data sets, leading to biased prediction. We have advanced a novel workflow that applies large synthetic seismic training data to reduce facies-related bias. Using a geologically realistic model as the truth model, we randomly select sparse seed wells to perform sequential Gaussian simulation (SGS) for impedance models of the same geometry and simulate facies variability. We implement random forest regression on 30 features extracted from the synthetic volume. We observe that more seed wells tend to reduce facies-induced bias by sampling more types of facies, resulting in a better prediction. We then focus on the responses of SGS models to facies changes, the number of seed wells necessary for a useful synthetic model, and how much a synthetic model can help ML-based inversion. Here, we observe that the SGS synthetic training model outperforms well-direct training in general. For modeled clastic shore-zone systems in Miocene Gulf of Mexico, two or more seed wells are necessary for a significant reduction of root-mean-square error and outliners, and improvement of facies imaging. In a field-data test, we apply a similar workflow to quantitatively predict acoustic impedance, which is then converted to a sand-volume map at a high-frequency sequence (10–100 m), revealing detailed facies and sandstone patterns. Such results are valuable in many geologic and engineering applications, such as hydrocarbon and CO 2 reservoir prospecting, reserve estimation, simulation, etc.

3D seismic↗

RTN-099: Photometric Transformation Relations for the LSST Data Preview 1

This technical note provides photometric transformation relations between the Vera C. Rubin Observatory's LSSTCam and LSSTComCam systems and other photometric systems. These transformations are derived using both synthetic and empirical data and are intended to support calibration and comparison across survey systems. We present both polynomial equations and lookup-table-based methods, depending on the available data and desired accuracy. The transformations are generally valid for stars with typical spectral energy distributions (SEDs), and caution should be used when applying them to objects with strong emission lines or atypical colors.

79 ASTRONOMY AND ASTROPHYSICS↗

RTN-125: Photometric Transformation Relations for the LSST Data Preview 2

This technical note provides photometric transformation relations between the NSF-DOE Vera C. Rubin Observatory's Data Preview 2 (DP2) and other photometric systems. These transformations are derived using both synthetic and empirical data and are intended to support calibration and comparison across survey systems. We present both polynomial equations and lookup-table-based methods, depending on the available data and desired accuracy. The transformations are generally valid for stars with typical spectral energy distributions (SEDs), and caution should be used when applying them to objects with strong emission lines or atypical colors.

79 ASTRONOMY AND ASTROPHYSICS↗

Water survey of Canada: Application for use of ERTS-A for retransmission of water resources data

The author has identified the following significant results. Over 7000 transmissions were received from six operating DCPs in 1972. Of these, only two were incorrect. One had the wrong date and the other had an invalid digit in the water level reading. Extensive checks have indicated that DCP data are accurate. The maximum number of transmissions received each day varies from 26 to 12 and the minimum from 10 to 3 depending on the site. Data has been received on as many as seven orbits in a day. The number of transmissions received from the two DCPs located in mountainous areas of southern B.C. is lower than the number received from more northerly but more open sites. The unheated DCPs have survived temperatures of -40 F and antenna loadings of two feet of snow and wind speeds over 50 mph. Two DCPs have indicated sensor malfunctions thus alerting field staff to the fact that repairs will be necessary on their next visit to the site. Also in another case, DCP data were used to fill in a period of missing record when a water level recorder malfunctioned for a few days.

Halliday, R. A.↗

Data-driven prediction of geometry- and toolpath sequence-dependent intra-layer process conditions variations in laser powder bed fusion

Geometrical features and toolpath sequence are two important factors that cause process condition variations, such as variations in the meltpool temperature or meltpool size, that might lead to undesired material properties in the laser powder bed fusion (LPBF) process. Due to the high dynamics and complex physics of the LPBF process, it is difficult to predict variations in process conditions with simulations alone. Advances in measurement technology and computational technologies open up new possibilities for smart manufacturing. In this paper, a data-driven method to predict intra-layer variations in the processing conditions that source from the toolpath sequence and part geometry is presented. The approach is demonstrated using two-color on-axis pyrometer measurements. Three demonstration cases are presented in which it is demonstrated (1) how the trained predictive model can be used as a filter to ease the interpretation of process variations and discover patterns related to toolpath and part geometry, and (2) how to generate predictions that can be used for feedforward control, i.e., for adjusting laser power or scanning speed along the toolpath using a meltpool temperature prediction model generated based on on-axis measurements. Results show that the developed prediction model is able to meaningfully predict process variations resulted from toolpath sequence and geometry. Predictions are aligned with the results from the related work of others and for the case of 180° laser path turnarounds in our high-speed X-ray imaging experiments. In conclusion, the potential issues related to the current maturity status of the process and measuring equipment that could in practice affect the performance of the proposed solutions are also discussed.

42 ENGINEERING↗

Tomographic imaging system for measuring impurity line emission in a field-reversed configuration

A 16 chord optical tomography system has been developed and implemented in the flux coil generated-field reversed configuration (FRC). The chords are arranged in two fans of eight, which cover {approx}35% of the vessel area at the midplane. Each illuminate separate photomultiplier tubes (PMTs) which are fitted with narrow band-pass filters. In this case, filters are centered at 434.8 nm to measure emission from singly ionized argon. PMT crosstalk is negligible. Background noise due to electron radiation and H{sub {gamma}} line radiation is <10% of argon emission. The spatial resolution of the reconstruction is 1.5 cm. Argon is introduced using a puff valve and tube designed to impart the gas into the system as the FRC is forming. Reconstruction of experimental data results in time-dependent, 2D emissivity profiles of the impurity ions. Analysis of these data show radial, cross-field diffusion to be in the range of 10-10{sup 3} m{sup 2}/s during FRC equilibrium.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Self-Referenced Method for Estimating Refractive Index and Absolute Absorption of Loose Semiconductor Powders

The absolute absorption coefficient, α(E), is a critical design parameter for devices using semiconductors for light harvesting associated with renewable energy production, both for classic technologies such as photovoltaics and for emerging technologies such as direct solar fuel production. While α(E) is well-known for many classic simple semiconductors used in photovoltaic applications, the absolute values of α(E) are typically unknown for the complex semiconductors being explored for solar fuel production due to the absence of single crystals or crystalline epitaxial films that are needed for conventional methods of determining α(E). In this work, a simple self-referenced method for estimating both the refractive indices, n(E), and absolute absorption coefficients, α(E), for loose powder samples using diffuse reflectance data is demonstrated. In this method, the sample refractive index can be deduced by refining n to maximize the agreement between the relative absorption spectrum calculated from bidirectional reflectance data (calculated through a Hapke transform which depends on n) and integrating sphere diffuse reflectance data (calculated through a Kubleka–Munk transform which does not depend on n). This new method can be quickly used to screen the suitability of emerging semiconductor systems for light-harvesting applications. The effectiveness of this approach is tested using the simple classic semiconductors Ge and Fe 2 O 3 as well as the complex semiconductors La 2 MoO 5 and La 4 Mo 2 O 11 . The method is shown to work well for powders with a narrow size distribution (exemplified by Fe 2 O 3 ) and to be ineffective for semiconductors with a broad size distribution (exemplified by Ge). As such, it provides a means for rapidly estimating the absolute optical properties of complex solids which are only available as loose powders.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Assessing alcohol intake & its dose-dependent effects on liver enzymes by 24-h recall and questionnaire using NHANES 2001-2010 data

Alcohol is a significant component of the diet with dose-dependent risks and benefits. High doses of alcohol damage the liver and early symptoms of liver disease include changes in routinely assessed liver enzymes. Less is known regarding the mechanisms responsible for the benefits of moderate alcohol consumption, including their effects on the liver. The objectives of this study were to examine alcohol’s dose-dependent effects on markers of liver function (alkaline phosphatase (ALP), alanine aminotransferase (ALT), aspartate aminotransferase (AST), gamma glutamyl transferase (GGT), and bilirubin), as well as to compare the different methods of assessing alcohol intake using NHANES 2001–2010 adult data (N =24,807). Three methods were used to estimate alcohol intake from all volunteers: 24-h recall; the National Cancer Institute (NCI) method of usual intake; and a specific alcohol intake questionnaire. Mean alcohol intake by 24-h recall, NCI method and questionnaire was 41.0 ± 0.8 g/d, 10.9 ± 0.2 g/d and 11.0 ± 0.2 g/d, respectively. Alcohol consumers had significantly lower levels of ALP and higher levels of AST, GGT and bilirubin compared to non-consumers (P < 0.01) and activities of ALT, AST, and GGT increased and of ALP decreased as alcohol intake increased, regardless of intake assessment method used. The most sensitive measure of alcohol consumption was GGT. Since alcohol had a graded linear effect on several liver enzymes, including at low and moderate doses, benefits as well as risks of alcohol intake may be related to liver function. In conclusion, since the NCI method and alcohol questionnaire yielded very similar alcohol intake estimates, this study cross-validated these methods and demonstrated the robustness of the NCI method for estimating intake of irregularly consumed foods.

60 APPLIED LIFE SCIENCES↗

An automated multiplexed turbidometric and data collection system for measuring growth kinetics of anaerobes dependent on gaseous substrates

Standard methods of monitoring the growth kinetics of anaerobic microorganisms are generally impractical when there is a protracted or indeterminate period of active growth, and when high numbers of samples or replications are required. As part of our studies of the adaptive evolution of a simple anaerobic syntrophic mutualism, requiring the characterization of many isolates and alternative syntrophic pairings, here we developed a multiplexed growth monitoring system using a combination of commercially available electronics and custom designed circuitry and materials. This system automatically monitors up to 64 sealed, and as needed pressurized, culture tubes and reports the growth data in real-time through integration with a customized relational database. The utility of this system was demonstrated by resolving minor differences in growth kinetics associated with the adaptive evolution of a simple microbial community comprised of a sulfate reducing bacterium, Desulfovibrio vulgaris, grown in syntrophic association with Methanococcus maripaludis, a hydrogenotrophic methanogen.

59 BASIC BIOLOGICAL SCIENCES↗

Layer and material-type dependent photoresponse in Se 2 /WS 2 vertical heterostructures

Transition metal dichalcogenide (TMD) heterostructures are promising for a variety of applications in photovoltaics and photosensing. Successfully exploiting these heterostructures will require an understanding of their layer-dependent electronic structures. However, there is no experimental data demonstrating the layer-number dependence of photovoltaic effects (PVEs) in vertical TMD heterojunctions. Here, by combining scanning electrochemical cell microscopy (SECCM) with optical probes, we report the first layer-dependence of photocurrents in WSe 2 /WS 2 vertical heterostructures as well as in pristine WS 2 and WSe 2 layers. For WS 2 , we find that photocurrents increase with increasing layer thickness, whereas for WSe 2 the layer dependence is more complex and depends on both the layer number and applied bias (V b ). Further, we find that photocurrents in the WSe 2 /WS 2 heterostructures exhibit anomalous layer and material-type dependent behaviors. Our results advance the understanding of photoresponse in atomically thin WSe 2 /WS 2 heterostructures and pave the way to novel nanoelectronic and optoelectronic devices.

36 MATERIALS SCIENCE↗

Evaluation of modern {sup 3}He({alpha}, {gamma}){sup 7}Be data

In both the Sun and the early universe, the {sup 3}He({alpha}, {gamma}){sup 7}Be reaction plays a key role. The rate of this reaction is the least certain nuclear input needed to calculate both the primordial {sup 7}Li abundance in big-bang nucleosynthesis and the solar neutrino flux. Taking advantage of several recent highly precise experiments, we analyze modern {sup 3}He({alpha}, {gamma}){sup 7}Be data using a robust and minimally model-dependent approach capable of handling discrepant data sets dominated by systematic rather than statistical errors. We find S{sub 34}(0)=0.580{+-}0.043(0.054) keV b at the 68.3(95.4)% confidence level.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

OPERA models for predicting physicochemical properties and environmental fate endpoints

The collection of chemical structure information and associated experimental data for quantitative structure–activity/ property relationship (QSAR/QSPR) modeling is facilitated by an increasing number of public databases containing large amounts of useful data. However, the performance of QSAR models highly depends on the quality of the data and modeling methodology used. This study aims to develop robust QSAR/QSPR models for chemical properties of environmental interest that can be used for regulatory purposes. This study primarily uses data from the publicly available PHYSPROP database consisting of a set of 13 common physicochemical and environmental fate properties. These datasets have undergone extensive curation using an automated workflow to select only high-quality data, and the chemical structures were standardized prior to calculation of the molecular descriptors. The modeling procedure was developed based on the five Organization for Economic Cooperation and Development (OECD) principles for QSAR models. A weighted k-nearest neighbor approach was adopted using a minimum number of required descriptors calculated using PaDEL, an open-source software. The genetic algorithms selected only the most pertinent and mechanistically interpretable descriptors (2–15, with an average of 11 descriptors). The sizes of the modeled datasets varied from 150 chemicals for biodegradability half-life to 14,050 chemicals for logP, with an average of 3222 chemicals across all endpoints. The optimal models were built on randomly selected training sets (75%) and validated using fivefold cross-validation (CV) and test sets (25%). The CV Q2 of the models varied from 0.72 to 0.95, with an average of 0.86 and an R2 test value from 0.71 to 0.96, with an average of 0.82. Modeling and performance details are described in QSAR model reporting format and were validated by the European Commission’s Joint Research Center to be OECD compliant. All models are freely available as an open-source, command-line application called OPEn structure–activity/property Relationship App (OPERA). OPERA models were applied to more than 750,000 chemicals to produce freely available predicted data on the U.S. Environmental Protection Agency’s CompTox Chemistry Dashboard.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Turbulence modeling and experiments

The best way of verifying turbulence is to do a direct comparison between the various terms and their models. The success of this approach depends upon the availability of the data for the exact correlations (both experimental and DNS). The other approach involves numerically solving the differential equations and then comparing the results with the data. The results of such a computation will depend upon the accuracy of all the modeled terms and constants. Because of this it is sometimes difficult to find the cause of a poor performance by a model. However, such a calculation is still meaningful in other ways as it shows how a complete Reynolds stress model performs. Thirteen homogeneous flows are numerically computed using the second order closure models. We concentrate only on those models which use a linear (or quasi-linear) model for the rapid term. This, therefore, includes the Launder, Reece and Rodi (LRR) model; the isotropization of production (IP) model; and the Speziale, Sarkar, and Gatski (SSG) model. Which of the three models performs better is examined along with what are their weaknesses, if any. The other work reported deal with the experimental balances of the second moment equations for a buoyant plume. Despite the tremendous amount of activity toward the second order closure modeling of turbulence, very little experimental information is available about the budgets of the second moment equations. Part of the problem stems from our inability to measure the pressure correlations. However, if everything else appearing in these equations is known from the experiment, pressure correlations can be obtained as the closing terms. This is the closest we can come to in obtaining these terms from experiment, and despite the measurement errors which might be present in such balances, the resulting information will be extremely useful for the turbulence modelers. The purpose of this part of the work was to provide such balances of the Reynolds stress and heat flux equations for the buoyant plume.

Shabbir, Aamir↗

US data policy for Earth observation from space

Distribution of data from U.S. Earth observations satellites is subject to different data policies and regulations depending on whether the systems in question are operational or experimental. Specific laws, regulations, and policies are in place for the distribution of satellite data from the National Oceanic and Atmospheric Administration (NOAA) operational environmental satellites and from NASA experimental systems. There is a government wide policy for exchange of data for global change research. For the Earth Observing System (EOS) and its international partner programs, a set of data exchange principles is nearing completion. The debate over the future of the LANDSAT program in the U.S. will impact policy for the programs, but the outcome of the debate is not yet known.

Shaffer, Lisa Robock↗

Simulated retrieval of land surface parameters using multichannel satellite microwave radiometry

The current global change research emphasis on understanding water and energy fluxes at the land-atmosphere interface provided renewed interest in using passive microwave satellite data for land studies. Radiative transfer models of microwave emission and scattering in the soil-vegetation-atmosphere column, though still in the process of development, can be used to estimate the accuracies with which land surface parameters can be derived from satellite data. These parameters include surface soil moisture, surface temperature, vegetation water content, and atmospheric water content. A microwave radiative transfer model is used to develop linear and nonlinear versions of a multichannel retrieval algorithm to simulate retrievals of the surface and atmospheric parameters. These simulations include the effect of additive noise, and examine the effects of nonlinearities in the radiative transfer models. However, effects of spatial heterogeneity are not considered. Satellite data to which the retrieval algorithms may be applied include the SSMR and SSM/I, and in future will include the Multifrequency Imaging Microwave Radiometer (MIMR) to be launched as part of the Earth Observing System (EOS). The Scanning Multichannel Microwave Radiometer (SMMR) on the Nimbus-7 satellite provided data from 1978 to 1987 at five microwave frequencies between 6.6 and 37 GHz. The series of Special Sensor Microwave/Imager (SSM/I) instruments launched on the DMSP satellites provide data from 1987 to the present at four frequencies between 19.35 and 8.5 GHz. Spatial resolutions of the data range from approximately 12 to 120 km depending on the frequency. Examples using data from these sensors are shown to indicate the results of applying retrieval algorithms based on model simulations to real data.

Njoku, Eni G.↗

Correlations between jet-quenching observables at energies available at the BNL Relativistic Heavy Ion Collider

Focusing on four types of correlation plots, R{sub AA} versus v{sub 2}, R{sub AA} versus I{sub AA}, I{sub AA} versus v{sub 2}{sup I{sub AA}}, and v{sub 2} versus v{sub 2}{sup I{sub AA}}, we demonstrate how the centrality dependence of correlations between multiple jet quenching observables provide valuable insight into the energy loss mechanism in a quark-gluon plasma. In particular, we find that a qualitative energy loss model gives a good description of R{sub AA} versus v{sub 2} only when we take {Delta}E-I{sup 3} and a medium geometry generated by a model of the color glass condensate. This same {Delta}E-I{sup 3} model also qualitatively describes the trigger p{sub T} dependence of R{sub AA} versus I{sub AA} data and makes novel predictions for the centrality dependence for this R{sub AA} versus I{sub AA} correlation. Current data suggest, albeit with extremely large uncertainty, that v{sub 2}{sup I{sub AA}} >> v{sub 2}, a correlation that is difficult to reproduce in current energy loss models.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗