Search NASA⌕ Search

SEARCH · Search NASA

Results for “dislocation density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Low-dark current 10 Gbit/s operation of InAs/InGaAs quantum dot p-i-n photodiode grown on on-axis (001) GaP/Si

We demonstrate 10 Gbit/s operation of InAs/InGaAs quantum dot (QD) p-i-n photodiodes (PDs) grown on on-axis (001) GaP/Si substrates. A 3.0 × 50 μm2 QD PD shows a small dark current of 0.2 nA at a bias voltage of −3 V, which corresponds to a dark current density of 0.13 mA/cm2. This low-dark current characteristic obtained from a narrow-stripe device indicates that sidewall and threading dislocations have small effects on the dark current. The 3 dB bandwidth was 5.5 GHz at a bias voltage of −5 V. Large signal measurement with non-return-to-zero signals shows 10 Gbit/s eye opening.

Inoue, D.↗

Tailoring mechanical properties of a multi-principal element alloy through a multi-length-scale approach

In this study, a multi-length-scale strengthening approach was used to tailor the microstructure and the mechanical properties of a NiCoCr-based multi-principal element alloy (MPEA). Grain size refinement, severe lattice distortion, and stacking fault energy (SFE) reduction with Mo addition (up to 10 at.%) enhance yield strength by 85% with only 10% reduction in ductility in as-annealed MPEAs. A pronounced increase in the strain hardening rate was observed with the addition of Mo, which is ascribed to the promotion of complex stacking fault (SF) interaction and intersection, accompanied by Lomer-Cottrell (L-C) and Hirth locks inhibiting dislocation motion and substantial increase in the accumulation of back stress. To push the limit of the yield strength further, the Suzuki segregation phenomenon was manipulated by a careful control of SF density by pre-straining and a subsequent 500 °C heat treatment. The stress-strain responses of the pre-strained and heat treated MPEAs showed an obvious SF density and Mo concentration dependence. Furthermore, the yield strength of the pre-strained Mo-added MPEAs with subsequent heat treatment was increased up to true stress of 2.3 GPa with a corresponding fracture elongation of 12% true strain. SFs formed during pre-straining served as Cr segregation sites during subsequent heat treatment, which substantially varies the local SFE within the SF, presenting a roughened landscape and frustrating the dislocation dynamics.

mechanical properties↗

Decoupling between Shockley partials and stacking faults strengthens multiprincipal element alloys

We report that mechanical properties are fundamental to structural materials, where dislocations play a decisive role in describing their mechanical behavior. Although the high-yield stresses of multiprincipal element alloys (MPEAs) have received extensive attention in the last decade, the relation between their mechanistic origins remains elusive. Our multiscale study of density functional theory, atomistic simulations, and high-resolution microscopy shows that the excellent mechanical properties of MPEAs have diverse origins. The strengthening effects through Shockley partials and stacking faults can be decoupled in MPEAs, breaking the conventional wisdom that low stacking fault energies are coupled with wide partial dislocations. This study clarifies the mechanistic origins for the strengthening effects, laying the foundation for physics-informed predictive models for materials design.

36 MATERIALS SCIENCE↗

Effect of Plastic Deformation on Passivation Characteristics of Type 304 Stainless Steel

Electrochemical response of Type 304 stainless steel, with different levels of plastic deformation, was investigated in solutions containing different amounts of H{sub 2}SO{sub 4} and KSCN at room temperature. Potentiodynamic polarization and double-loop electrochemical potentiokinetic reactivation (DL-EPR) techniques were used to characterize different levels of plastic deformation. The results have indicated that DL-EPR values and passivation current density increased with increase in plastic deformation. The DL-EPR values were correlated well with hardness and fraction of strain-induced martensite. Attack during DL-EPR tests occurred on strain regions within the matrix such as dislocations in austenite and martensite and/or interface between austenite and martensite. No well-defined correlation was observed between the levels of plastic deformation and potentiodynamic polarization behavior.

36 MATERIALS SCIENCE↗

Heavy-ion irradiations of Fe and Fe-Cr model alloys, part 1: damage evolution in thin-foils at lower doses.

The evolution of radiation damage in Fe and Fe-Cr alloys under heavy-ion irradiation was investigated using transmission electron microscopy. Thin foils were irradiated with 100 or 150 keV Fe{sup +} and Xe{sup +} ions at room temperature (RT) and 300 C. Dynamic observations followed the evolution of damage and the early stages in damage development are reported. Small (2-5 nm) dislocation loops first appeared at doses between 10{sup 16} and 10{sup 17} ions m{sup -2} in all materials. Loop number densities depended strongly on the foil orientation in pure Fe but not in Fe-Cr alloys. Number densities did not depend strongly on Cr content. For a given material, defect yields were higher for Xe{sup +} ions than for Fe{sup +} ions, and were higher at RT than at 300 C. Loops with both 100 and 1/2 111 Burgers vectors were identified. The proportion of 100 loops was larger, especially in pure Fe. Dynamic observations showed that: the contrast of some new loops developed over intervals as long as 0.2 s; hopping of 1/2 111 loops was induced by the ion and electron beams and was pronounced in ultra-pure iron; and many loops were lost during and after ion irradiation by glide to the foil surface. The number of loops retained was strongly dependent on the foil orientation in Fe, but less so in Fe-Cr alloys. This is due to lower loop mobility in Fe-Cr alloys, probably due to pinning by Cr atoms. Reduced loop loss probably explains the higher loop number densities in Fe-Cr alloys compared with pure Fe.

36 MATERIALS SCIENCE↗

Understanding H isotope adsorption and absorption of Al-alloys using modeling and experiments (LDRD: #165724)

Current austenitic stainless steel storage reservoirs for hydrogen isotopes (e.g. deuterium and tritium) have performance and operational life-limiting interactions (e.g. embrittlement) with H-isotopes. Aluminum alloys (e.g.AA2219), alternatively, have very low H-isotope solubilities, suggesting high resistance towards aging vulnerabilities. This report summarizes the work performed during the life of the Lab Directed Research and Development in the Nuclear Weapons investment area (165724), and provides invaluable modeling and experimental insights into the interactions of H isotopes with surfaces and bulk AlCu-alloys. The modeling work establishes and builds a multi-scale framework which includes: a density functional theory informed bond-order potential for classical molecular dynamics (MD), and subsequent use of MD simulations to inform defect level dislocation dynamics models. Furthermore, low energy ion scattering and thermal desorption spectroscopy experiments are performed to validate these models and add greater physical understanding to them.

36 MATERIALS SCIENCE↗

Dependence of the Bulk Electrical Properties of Multisilicon on the Grain Misorientation Parameters

The recombination activity of intragrain defects in multicrystalline silicon is investigated by the electron or laser beam induced current methods. The interrelation of the grain orientation with the character of the distribution of intragrain defects (dislocations and impurity inclusions) and their recombination activity is revealed. The defect grain structure is investigated using various etching procedures to reveal the defects. It is shown that the defect density and distribution in the grains depend on their orientation relative the growth axis. Therefore, it is intragrain defects and impurities that are to a large degree responsible for degradation of the nonequilibrium carrier lifetime when compared with grain boundaries.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Twinning and Dislocation Pileups in Heavily Implanted LiNbO3

The nature of a striking pattern of extended defects formed by very high dose implantation of helium in a complex oxide, for example, ferroelectricz-cut LiNbO{sub 3}, is studied. After irradiation, a high concentration of defects is found to collect and create a network of thick prismatic planar defects, which have typical dimensions of {approx}1.5 {micro}m and 200 nm parallel and perpendicular to the z axis, respectively. This defect network and its effect on the lattice were studied using a set of x-ray and electron microscopy probes of the lattice structure and spatial variation. Optical microscopy shows that there is strong temperature dependence for forming the network; the density of these extended defects reaches a maximum value for an annealing temperature of 250 C but is fully eliminated by a temperature of 380 C. High-resolution transmission electron microscopy studies indicate that these extended defects are probably localized twinning and dislocation pileups due to plastic deformation of the lattice to relieve He-implantation-induced stress. During this deformation, He accumulates at the twin boundaries. The study also shows that the He interstitials evolve into bubbles causing high stress and resulting in a formation of thick prismatic planar defects. Finally, a mechanism is proposed for defect creation and elimination.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Quantifying the mechanical effects of He, W and He + W ion irradiation on tungsten with spherical nanoindentation

Here, recent advances in spherical nanoindentation protocols have proven very useful for capturing the grain-scale mechanical response of different metals. This is achieved by converting the load–displacement response into an effective indentation stress–strain response which reveals latent information such as the elastic–plastic transition or indentation yield strength and work-hardening behavior and subsequently correlating the response with the material structure (e.g., crystal orientation) at the indentation site. Using these protocols, we systematically study and quantify the microscale mechanical effects of He, W, and He + W ion irradiation on commercially pure, polycrystalline tungsten. The indentation stress–strain response is correlated with the crystal orientation from electron backscatter diffraction, the defect structure from transmission electron microscopy micrographs, and the stopping range of ions in matter calculations of displacement damage and He concentration. He-implanted grains show a much higher indentation yield strength and saturation stress compared to W-ion-irradiated grains for the same displacement damage. There is also good agreement between the dispersed barrier hardening model with a barrier strength of 0.5–0.8 and void models (Bacon–Kochs–Scattergood and Osetsky–Bacon models) with the experimentally observed changes in indentation strength due to the presence of He bubbles. This finding indicates that a high density (~ 9 × 10 23 m –3 ) and concentration (~ 1.5 at.%) of small (~ 1 nm diameter) He bubbles can be moderate to strong barriers to dislocation slip in tungsten.

36 MATERIALS SCIENCE↗

Small-Angle Twist Grain Boundaries as Sinks for Point Defects

It is known that grain boundaries (GBs) provide sinks for defects induced into a solid by irradiation. At the same time radiation can change the atomic structure and chemistry of GBs, which in turn impacts the ability of GBs to continue absorbing defects. Although a number of studies have been reported for tilt GBs acting as defect sinks, the questions of how twist GBs evolve to absorb non-equilibrium concentrations of defects and whether GBs saturate as defect sinks for typical irradiation conditions have remained largely unanswered. Here, we used a combination of molecular dynamics and grand canonical Monte Carlo simulations to determine how twist GBs accommodate point defects. We used SiC and {001} and {111} twist GBs as model systems. We found that diffusion of defects along GBs in this material is slow and for most experimentally relevant conditions point defects will accumulate at twist GBs, driving structural and chemical evolution of these interfaces. During irradiation, screw dislocations within GB planes absorb interstitials by developing mixed dislocation segments that climb. Formation of mixed dislocations occurs either by nucleation of interstitial loops or by faulting/unfaulting of stacking faults. Furthermore both types of twist GBs can accommodate a high density of interstitials without losing the crystalline structure, irrespectively of the interstitial flux.

36 MATERIALS SCIENCE↗

Modeling and Simulating Dislocation Dynamics Near Sound Speeds in Cubic Crystals

The motion of crystal dislocations near sound speeds is investigated using atomic-scale molecular dynamics (MD) simulations and continuum equations of motion. A material’s deformation rate is influenced by whether dislocations can propagate in the high-velocity high-stress regime. In the femto-second resolved MD simulations, a shear stress is applied to a pair of partial edge dislocations in copper at T = 25 K, and the pair’s average position is tracked with time. Analysis for the steady-state motion reveals that the dislocations can move faster than at least two transverse sound speeds depending on the applied stress. On the modeling side, the dislocation glide equations govern the evolution of the local displacement field according to material elastic constants. A second-order accurate finite difference scheme is applied to solve the screw dislocation equation in the continuum limit for aluminum. This method proved difficult to implement due to numerical instabilities surrounding the dislocation core, so alternative solving schemes may be needed. Combining an external acceleration with the equation of motion should reveal whether the strain energy density remains finite at transonic and supersonic glide speeds.

36 MATERIALS SCIENCE↗

Excitation-Dependent Recombination and Diffusion Near an Isolated Dislocation in GaAs

In low-magnification, plan-view photoluminescence images of a nominally lattice-matched, undoped GaAs/GaInP heterostructure, we observe a random distribution of isolated dark spots. We attribute the dark spots to crystal dislocations, where nonradiative recombination is augmented by transitions utilizing defect-related energy levels between the conduction and valence bands. We note that, when the laser excitation intensity is reduced, the darkened regions expand. At lower excitation, the density of photogenerated electrons and holes is reduced, and they are more likely to reach the defective region before encountering a partner for radiative recombination. When we model the behavior with a simulation that allows for Laplacian diffusion and defect-related recombination only through mid-bandgap energy levels, we do not obtain good agreement between experimental and simulated images. But if we allow for an arbitrary distribution of defect levels, such that the occupation of the levels and bands can change independently, we have more flexibility for fitting the density-dependent recombination rates. The more sophisticated model produces results that are more consistent with experimental images.

14 SOLAR ENERGY↗

Calculated thermoelectric properties of In x Ga 1-x N, In x Al 1-x N, and Al x Ga 1-x N

The thermoelectric properties of III-nitride materials are of interest due to their potential use for high temperature power generation applications and the increasing commercial importance of the material system; however, the very large parameter space of different alloy compositions, carrier densities, and range of operating temperatures makes a complete experimental exploration of this material system difficult. In order to predict thermoelectric performances and identify the most promising compositions and carrier densities, the thermoelectric properties of InxGa1-xN, InxAl1-xN, and AlxGa1-xN are modeled. The Boltzmann transport equation is used to calculate the Seebeck coefficient, electrical conductivity, and the electron component of thermal conductivity. Scattering mechanisms considered for electronic properties include ionized impurity, alloy potential, polar optical phonon, deformation potential, piezoelectric, and charged dislocation scattering. The Callaway model is used to calculate the phonon component of thermal conductivity with Normal, Umklapp, mass defect, and dislocation scattering mechanisms included. Thermal and electrical results are combined to calculate ZT values. InxGa1-xN is identified as the most promising of the three ternary alloys investigated, with a calculated ZT of 0.85 at 1200 K for In0.1Ga0.9N at an optimized carrier density. AlxGa1-xN is predicted to have a ZT of 0.57 at 1200 K under optimized composition and carrier density. InxAl1-xN is predicted to have a ZT of 0.33 at 1200 K at optimized composition and carrier density. Calculated Seebeck coefficients, electrical conductivities, thermal conductivities, and ZTs are compared with experimental data where such data are available.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

On the capability of deep level transient spectroscopy for characterizing multi-crystalline silicon

The suitability of the deep level transient spectroscopy (DLTS) technique in exploring locations with high and degraded carrier lifetimes containing grain-boundaries (GBs) in multicrystalline silicon (mc-Si) wafers was studied. The types and locations of GBs were determined in mc-Si samples by electron backscatter diffraction. Mesa-type Schottky diodes were prepared at (along) GBs and at reference, GB-free locations. Detected DLTS signals varied strongly along the same GB. Experiments with dislocation networks, model structures for GBs, showed that GB-related traps may be explored only using special arrangement of a GB and the diode contacts. Iron-related carrier traps were detected in locations with degraded carrier lifetimes. Densities of the traps for near-GB and for GB free locations were compared to the lifetime measurement results.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Direct Visualization of Localized Vibrations at Complex Grain Boundaries

Abstract Grain boundaries (GBs) are a prolific microstructural feature that dominates the functionality of a wide class of materials. The functionality at a GB results from the unique atomic arrangements, different from those in the grain, that have driven extensive experimental and theoretical studies correlating atomic‐scale GB structures to macroscopic electronic, infrared optical, and thermal properties. In this work, a SrTiO 3 GB is examined using atomic‐resolution aberration‐corrected scanning transmission electron microscopy and ultrahigh‐energy‐resolution monochromated electron energy‐loss spectroscopy, in conjunction with density functional theory. This combination enables the correlation of the GB structure, nonstoichiometry, and chemical bonding with a redistribution of vibrational states within the GB dislocation cores. The new experimental access to localized GB vibrations provides a direct route to quantifying the impact of individual boundaries on macroscopic properties.

36 MATERIALS SCIENCE↗

Atomic-Scale Tracking of Topological Defect Motion and Incommensurate Charge Order Melting

Charge order pervades the phase diagrams of quantum materials where it competes with superconducting and magnetic phases, hosts electronic phase transitions and topological defects, and couples to the lattice generating intricate structural distortions. Incommensurate charge order is readily stabilized in manganese oxides, where it is associated with anomalous electronic and magnetic properties, but its nanoscale structural inhomogeneity complicates precise characterization and understanding of its relationship with competing phases. Leveraging atomic-resolution variable-temperature cryogenic scanning transmission electron microscopy, we characterize the thermal evolution of charge order as it transforms from its ground state in a model manganite system. We find that mobile networks of discommensurations and dislocations generate phase inhomogeneity and induce global incommensurability in an otherwise lattice-locked modulation. Driving the order to melt at high temperatures, the discommensuration density grows, and regions of order locally decouple from the lattice periodicity. Published by the American Physical Society 2025

Schnitzer, Noah (ORCID:0000000210421146)↗

Nanoscale Kondo Physics and Nanomechanics of Metallic Systems from First Principles

Kohn-Sham density functional theory (DFT) is a powerful, well-established tool for the study of condensed phase electronic structure. However, there are still a number of situations where its applicability is limited. The basic theme of our research is the development of first principles electronic structure approaches for condensed matter that goes beyond what can currently be done with standard implementations of Kohn-Sham DFT. Our efforts to this end have focused on two classes of methods. The first addresses the well-known inability of DFT to handle strong, many-body electron correlation effects. Our approach is a DFT-based embedding theory, to treat localized features (e.g. impurity, adsorbate, vacancy, etc.) embedded in a periodic, metallic crystal. A description for the embedded region is provided by explicitly correlated, ab initio wave function methods. DFT, as a formally ground state theory, does not give a good description of excited states; an additional feature of our approach is the ability to obtain excitations localized in this region. We apply our method to a first-principles study of the adsorption of a single magnetic Co adatom on non-magnetic Cu(111), a known Kondo system whose behavior is governed by strong electron correlation. The second class of methods that we are developing is an orbital-free density functional theory (OFDFT), which addresses the speed limitations of Kohn-Sham DFT. OFDFT is a powerful, 0(A) scaling method for electronic structure calculations. Unlike Kohn-Sham DFT, OFDFT goes back to the original Hohenberg-Kohn idea of directly optimizing an energy functional which is an explicit functional of the density, without invoking an orbital description. This eliminates the need to manipulate orbitals, which leads to O(N 3 ) scaling in the Kohn-Sham approach. The speed of OFDFT allows direct electronic structure calculations on large systems on the order of thousands to tens of thousands of atoms, an expensive feat within Kohn-Sham. Due to our incomplete knowledge of the exact, universal energy density functional, this speedup comes at the cost of some accuracy with respect to Kohn-Sham methods. However, OFDFT has been shown to be remarkably accurate with respect to Kohn-Sham when used in the study of nearly-free-electron-like metals, e.g., Al, for which good density functionals have been derived. Examples of past applications of OFDFT include the prediction of properties of bulk crystals, surfaces, vacancies, vacancy clusters, nanoclusters, and dislocations, as well as OFDFT-based multiscale simulations of nanoindentation in Al and Al-Mg alloys.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Deconvoluting the Effect of Chromium and Aluminum on the Radiation Response of Wrought FeCrAl Alloys After Low-Dose Neutron Irradiation

FeCrAl alloys have been extensively investigated over the past decade as a candidate material for accident-tolerant fuel cladding in light water reactors. Here, we have completed a first of its kind study where Al and Cr concentrations are varied systematically under neutron irradiation to elucidate the post irradiation microstructural and mechanical response as a direct result of alloying content. Neutron irradiations were performed on alloys with composition Fe-(10-13)Cr-(5-7)Al in wt.% at temperatures of 214, 357, and 557°C to a dose of ~1.8 dpa (displacements per atom). Dislocation loop sizes and dispersion characteristics did not show strong compositional dependence. However, there were noticeable effects of composition on the dispersion of Cr-rich α'-precipitates, particularly a decrease in number density with increasing Al content or a decrease in Cr content. The present results confirm previous studies indicating the Cr concentration in these precipitates is lower than that expected in binary FeCr alloys and that Al can act as a destabilizing alloying element for the deleterious α'-phase.

36 MATERIALS SCIENCE↗