Search NASA⌕ Search

SEARCH · Search NASA

Results for “electrical conversion efficiency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Rapid Flame-Annealed CuFe 2 O 4 as Efficient Photocathode for Photoelectrochemical Hydrogen Production

Copper ferrite (CuFe 2 O 4 ) possesses an indirect bandgap in the range of 1.54–1.95 eV. It is used as an attractive p-type photocathode in photoelectrochemical (PEC) water splitting, and theoretically it can yield a maximum photocurrent density of ~27 mA/cm 2 and a maximum solar-to-hydrogen conversion efficiency of ~33%. To date, only a few reports have been published on CuFe 2 O 4 photocathodes with very low-photocurrent densities, with a maximum value of 0.4 mA/cm2 at 0.4 V vs RHE. Herein, we prepared a CuFe 2 O 4 photocathode on FTO glass with the sol–gel method followed by either high-temperature flame annealing or furnace annealing. We found that the flame-annealed CuFe 2 O 4 photocathode generated a photocurrent density of 1.82 mA/cm 2 at 0.4 V vs RHE that is approximately 3.5 times higher than the furnace-annealed CuFe 2 O 4 (0.52 mA/cm 2 ). This photocurrent density is also higher than those of all the reported CuFe 2 O 4 photocathodes, and any Cu containing ternary oxide (Cu–M–O, M: Fe, Bi, V, and Nb) photocathode (0.1–1.3 mA/cm 2 at 0.4 V vs RHE). An improved PEC performance of the flame-annealed CuFe 2 O 4 photocathode is elicited owing to the beneficial effects of flame annealing on the physical, optical, and electrical properties of CuFe 2 O 4 . Flame annealing enhances the light absorption property of the CuFe 2 O 4 photocathode by slightly reducing the bandgap, and by forming a thicker film with increased porosity. Flame annealing also reduces the oxygen vacancy concentration in CuFe 2 O 4 , thus facilitating charge transport and interfacial charge transfer processes. Moreover, flame annealing requires only 16 min, which is much shorter than the time required for furnace annealing (~9 h). Furthermore, these results demonstrate that flame annealing is a rapid and effective means for fabricating metal oxide photoelectrodes with an enhanced PEC water splitting performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

A perspective on the device physics of lead halide perovskite semiconducting detector for gamma and x-ray sensing

Metal-halide perovskites are emerging materials for radiation sensing featuring high absorption cross section, high charge mobility, and long carrier lifetime enabling superior detection efficiencies even at room temperature. Perovskite detector technologies are more complex involving different detecting modes and device architectures. Here, to elucidate the working principles, we provide a Perspective on the device structures and the operational principles of halide perovskite direct conversion detectors for radiation sensing. We will first discuss different detection modes and introduce the commonly used device architectures and their working principles. Based on our work and pioneer developments in the field, we will next compare the performances of the reported detectors. Additionally, we will summarize the single crystal detectors and polycrystalline thin film devices and discuss their advantages and disadvantages for different applications. Finally, we provide a future Perspective on the critical problems that must be addressed to commercialize this technology.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2015

Efficient forward second-harmonic generation from planar archimedean nanospirals

Here, the enhanced electric field at plasmonic resonances in nanoscale antennas can lead to efficient harmonic generation, especially when the plasmonic geometry is asymmetric on either inter-particle or intra-particle levels. The planar Archimedean nanospiral offers a unique geometrical asymmetry for second-harmonic generation (SHG) because the SHG results neither from arranging centrosymmetric nanoparticles in asymmetric groupings, nor from non-centrosymmetric nanoparticles that retain a local axis of symmetry. Here, we report forward SHG from planar arrays of Archimedean nanospirals using 15 fs pulses from a Ti:sapphire oscillator tuned to 800 nm wavelength.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2018

Highly stable and efficient hybrid perovskite solar cells improved with conductive polyanilines

Highlights: • MAPbI{sub 3} perovskite film has been fabricated and modified with polyanilines for highly stable and efficient solar cells. • For the C-PNAI modified perovskite solar cells, a PCE enhanced from 7.91% to 9.43% as the fill factor improved. • The C-PNAI surfaces of perovskite film assists in the hole transport to the conductive carbon in the device. • The improved stability is attributed to the –NH{sub 2}{sup +}– of C-PNAI cations on the surface of the perovskites. - Abstract: Methyl ammonium lead iodide (MAPbI{sub 3}) perovskite film has been fabricated and modified with conductive polyanilines (C- PANI) and demonstrated for highly stable and efficient solar cells. For the C-PANI modified perovskite solar cells (PSCs), the average short circuit current density increased by 13.8% compared with pristine perovskite film (i.e., from 15.9 to 18.1 mA/cm{sup 2}) and the fill factor also improved, eventually leading to a power conversion efficiency (PCE) enhancement from 7.91% to 9.43% with high reproducibility. The C-PANI acts as a scaffold for crystallization of the perovskite layer, and improves the perovskite photovoltaic performance and stability, attributed to the favorable interfacial interaction between –NH{sub 2}{sup +}– groups of C-PANI and I{sup −} of MAPbI{sub 3} perovskite. The C-PANI-rich surfaces of MAPbI{sub 3}/PNAI perovskite film may also assists in the hole transport to the conductive carbon in the device. This work demonstrates that C-PANI can enhance the PCE and stability of PSCs.

14 SOLAR ENERGY↗
DOE OSTI2018

High Energy Density Lithium Battery

The primary objectives of this project were to develop the anode and cathode materials for high-energy density cells for use in plug-in hybrid electric vehicles (PHEVs) and in electric vehicles (EV) that offer substantially enhanced performance over current batteries used in PHEVs and with reduced cost. This was accomplished by performing research on both the anode and cathode components to improve their volumetric (and gravimetric) capacity. On the anode side the goal of doubling the capacity of today’s graphite based anodes was accomplished, using a tin-iron composite anode. This anode was found to have a coulombic efficiency greater than silicon allowing for more than 500 cycles. It shows the technical viability of alternative anodes. On the cathode side, two materials were investigated, both of which can react with two lithium ions. The intercalation cathode, Li x VOPO 4 , where 0≤x≤2, was shown to be highly reversible over two voltage plateaus, one at around 3.8 volts and the other at 2.5 volts. The total capacity exceeded 300 Ah/kg at low rates. The SnFe//Li x VOPO 4 couple was effectively cycled in full cells; the lifetime was limited by side-reactions on the cathode, which limited the overal cell coulombic efficiency to 98-99%. The conversion cathode, CuF 2 , had an initial capacity of 500 Ah/kg, but that fell rapidly due to transport of cuprous ions through all electrolytes studied. Summarizing, a new alternative anode for graphitic carbon was found that shows the technicla feasibility of using metal-based hosts for advanced anodes.

25 ENERGY STORAGE↗
DOE OSTI2020

Transportation Energy Data Book: Edition 38

The Transportation Energy Data Book: Edition 38 is a statistical compendium prepared and published by Oak Ridge National Laboratory (ORNL) under contract with the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Vehicle Technologies Office. Designed for use as a desk-top reference, the Data Book represents an assembly and display of statistics and information that characterize transportation activity, and presents data on other factors that influence transportation energy use. The purpose of this document is to present relevant statistical data in the form of tables and graphs. The latest edition of the Data Book is available via the Internet. This edition of the Data Book has 13 chapters which focus on various aspects of the transportation industry. Chapter 1 - focuses on petroleum; Chapter 2 - energy; Chapter 3 - highway vehicles; Chapter 4 - light vehicles; Chapter 5 - heavy vehicles; Chapter 6 - alternative fuel vehicles; Chapter 7 - transit and shared mobility; Chapter 8 - fleet vehicles; Chapter 9 - household vehicles; Chapter 10 - nonhighway modes; Chapter 11 - transportation and the economy; Chapter 12 - greenhouse gas emissions; and Chapter 13 - criteria pollutant emissions. The sources used represent the latest available data. There are also three appendices which include detailed source information for some tables, measures of conversion, and energy tables and figures with electricity generation and distribution taken into account. A glossary of terms is also included for the reader’s convenience.

02 PETROLEUM↗
DOE OSTI2021

Transportation Energy Data Book: Edition 39

The Transportation Energy Data Book: Edition 39 is a statistical compendium prepared and published by Oak Ridge National Laboratory (ORNL) under contract with the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Vehicle Technologies Office. Designed for use as a desk-top reference, the Data Book represents an assembly and display of statistics and information that characterize transportation activity and presents data on other factors that influence transportation energy use. The purpose of this document is to present relevant statistical data in the form of tables and graphs. The latest edition of the Data Book is available via the Internet (tedb.ornl.gov).This edition of the Data Book has 13 chapters which focus on various aspects of the transportation industry. Chapter 1 focuses on petroleum; Chapter 2 – energy; Chapter 3 – highway vehicles; Chapter 4 – light vehicles; Chapter 5 – heavy vehicles; Chapter 6 – alternative fuel vehicles; Chapter 7 – transit and other shared mobility; Chapter 8 – fleet vehicles; Chapter 9 – household vehicles; Chapter 10 – nonhighway modes; Chapter 11 – transportation and the economy; Chapter 12 – greenhouse gas emissions; and Chapter 13 – criteria pollutant emissions. The sources used represent the latest available data. There are also three appendices which include detailed source information for some tables, measures of conversion, and energy tables with electricity generation and distribution. A glossary of terms is also included for the reader’s convenience.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2024

Technical and Economic Assessment and Gap Analysis of Advanced Nuclear Reactor Integration with a Reference Oil Refinery

Efforts to identify the most-economic methods to decarbonize several sectors of the U.S. economy are underway. Industrial processes such as crude-oil refining rely heavily on energy-dense and easily stored and transported fossil fuels for powering their operations. Refineries use large amounts of energy, primarily derived from fossil sources to separate crude-oil components, break down heavier hydrocarbons into lighter compounds, remove impurities, reform hydrocarbon molecules, and generate steam and electricity for pumps and compressors and other various auxiliary systems. Crude-oil refining operations such as distillation, cracking, desulfurization, reforming, utilities systems and some offsite facilities collectively account for most of the energy consumption. Other operations such as hydrocracking or hydrotreating also require hydrogen for developing hydrogenation reactions which involve substantial heating to keep the reactors at high-temperature and pressure levels. All heat and energy demands are typically provided by natural gas (NG), oil, or other fuels, which makes refinery industry one of the most-difficult sectors to decarbonize. Nuclear power is a viable and energy-dense source of clean electricity, heat, and hydrogen to provide the large, sustainable energy supply that the refining industry demands. The U.S. Department of Energy’s (DOE’s) Integrated Energy Systems (IES) program is working to perform research and development, design, economic siting, and risk analysis. This state-of-the-art work will enable the first on-site demonstrations and commercial deployments of advanced small modular nuclear reactors (SMNRs) integrated with industries such as chemical production, refining, iron and steel making, and more. IES seeks to demonstrate the ability of advanced nuclear reactors to meet the heat and power demands of these industries while reducing carbon emissions in a sustainable and cost-competitive way. The primary objective of this research effort is to analyze industrial-scale SMNR integration intended to decarbonize refining facilities. The foreseen outcome is the provision of reliable, cost-competitive, and sustainable clean energy, alongside a reduction of carbon emissions. Specifically, the focus of this work lies on meeting the reference facilities’ heat and electricity demands with nuclear power while also supplying clean hydrogen via integrated high-temperature steam electrolysis (HTSE). This report presents a comprehensive technical and economic assessment of the integration of advanced nuclear reactors into a reference refinery, leveraging financial incentives from the Inflation Reduction Act (IRA). The evaluation aims to explore the potential economic benefits and challenges associated with incorporating advanced nuclear reactors into refinery operations, particularly in terms of energy efficiency, economic implications and environmental impact. By examining both the technical feasibility and economic viability, this analysis seeks to identify existing gaps and propose solutions for successful nuclear integration implementation. The findings are intended to provide valuable insights for stakeholders considering the adoption of advanced nuclear reactors in the refining sector. A refinery reference-plant was developed, using an open-source refinery model, Petroleum Refinery Lifecycle Inventory Model (PRELIM) and expert assessment, as a base case for comparison with various nuclear integration options. The capacity of 100 kbd/day (KBD) of heavy crude-oil feed was selected to represent a general coking-type refinery with deep conversion capabilities (incorporating heavy-oil upgrading with FCC, coking, and associated hydrotreating process units), using a heavy crude-oil feed, which represents about 70% of U.S. refineries configurations. A summary of all cases considered in this study is shown in Table 1.

13 HYDRO ENERGY↗
NASA NTRS1994

Alkali Metal Rankine Cycle Boiler Technology Challenges and Some Potential Solutions for Space Nuclear Power and Propulsion Applications

Alkali metal boilers are of interest for application to future space Rankine cycle power conversion systems. Significant progress on such boilers was accomplished in the 1960's and early 1970's, but development was not continued to operational systems since NASA's plans for future space missions were drastically curtailed in the early 1970's. In particular, piloted Mars missions were indefinitely deferred. With the announcement of the Space Exploration Initiative (SEI) in July 1989 by President Bush, interest was rekindled in challenging space missions and, consequently in space nuclear power and propulsion. Nuclear electric propulsion (NEP) and nuclear thermal propulsion (NTP) were proposed for interplanetary space vehicles, particularly for Mars missions. The potassium Rankine power conversion cycle became of interest to provide electric power for NEP vehicles and for 'dual-mode' NTP vehicles, where the same reactor could be used directly for propulsion and (with an additional coolant loop) for power. Although the boiler is not a major contributor to system mass, it is of critical importance because of its interaction with the rest of the power conversion system; it can cause problems for other components such as excess liquid droplets entering the turbine, thereby reducing its life, or more critically, it can drive instabilities-some severe enough to cause system failure. Funding for the SEI and its associated technology program from 1990 to 1993 was not sufficient to support significant new work on Rankine cycle boilers for space applications. In Fiscal Year 1994, funding for these challenging missions and technologies has again been curtailed, and planning for the future is very uncertain. The purpose of this paper is to review the technologies developed in the 1960's and 1970's in the light of the recent SEI applications. In this way, future Rankine cycle boiler programs may be conducted most efficiently. This report is aimed at evaluating alkali metal boiler technology for space Rankine cycle systems. Research is summarized on the problems of flow stability, liquid carryover, pressure drop and heat transfer, and on potential solutions developed, primarily those developed by the NASA Lewis Research Center in the 1960's and early 1970's.

Stone, James R.↗
NASA NTRSDate not supplied

Radiation and Nuclear Technology in Planetary Cave Environments

Many technological and environmental challenges must be resolved to enable successful lunar habitation and exploration, and to maximize scientific return. This presentation is intended as a preliminary discussion on three such areas of interest with the intent to identify likely areas of mutual benefit for collaboration and data sharing between the space nuclear and radiological disciplines with the planetary cave community. First is the previously identified and studied possible application of lunar lava tubes or pits to reduce the solar and cosmic radiation environment burden on crew health and hardware reliability. This is an area of continued interest, and should be kept in the forefront of discussion during the selection of sites for potential exploration or long-term habitation. In theory, the prospect of using existing morphology presents an enticing opportunity to reduce the requirements on landed mass or construction while also reducing dose or fluence of harmful natural radiation. However, such discussions should also include the practical implications of relocating habitation hardware and personnel from a landing site to a subsurface location. Inherent risks associated with landing in proximity to the relevant terrain must also be considered and weighed against those imposed by the natural radiation environment. Second is a discussion on the means by which a long-term habitation module or base of operations may be powered throughout the lunar day-night cycle. Fission surface power presents an opportunity to establish round-the-clock power in any lunar surface environment, including permanently shadowed regions where solar panels cannot operate, or in any other non-polar region where solar radiation is available for no more than two weeks per four-week cycle. Among the drawbacks of fission surface power is the need to either land and co-locate a heavy shield to minimize radiological consequences to personnel or equipment, land and operate construction equipment capable of restructuring the in-situ regolith to provide appropriate shielding, or to make use of existing topology features (e.g. craters or pits) to serve as pre-formed radiation barriers. A realistic assessment of the practicality of this third option should involve the selection of candidate features from existing surveys, and assess the effectiveness of the approach using modern radiation transport methodologies. Consideration must be made for the needs to reject waste heat in the thermal power conversion process, which typically requires the use of large area radiators. Energy must be exchanged from the reactor and power conversion system to such radiators, and the impacts on thermal efficiency and secondary scatter of nuclear radiation must be considered. Further consideration should be made for the implications of placement of a power source such that it does not sacrifice valuable scientific opportunity. Placement of a reactor is likely to thereafter prevent personnel access within that feature. Third is a discussion on the use of portable radioisotope power systems (RPS) within confined spaces, both with respect to the dose effects of emitted nuclear radiation and also performance associated with emitted thermal radiation. Radioisotope power systems provide a unique capability to power objects with no reliance upon solar radiance. However, their useable power production relies upon the flow of heat from ‘hot side’ (decaying radioisotope) to ‘cold side’ (radiators emitting heat to space). In the case of a confined volume in vacuum such as a lunar lava tube, that radiated energy will absorb into the wall, which is already above the ‘cold background’ temperature of dark space, and then gradually rises in temperature. That temperature rise, and its implications on availability of useable electrical power, will depend upon factors such as enclosure volume, thermal emissivity/absorptivity, and thermal conductivity through the depth of absorbing media. The advantages of nuclear technology may prove to enable unique scientific exploration opportunities, both above the lunar surface and below. In turn, the unique advantages of lunar lava tubes or pits may present unique opportunities to enhance the application of these technologies and to mitigate the effects of radiation from both natural and technological sources. A discussion on these pairings may prove to be valuable to all, in our endeavor to explore our neighboring worlds.

Radiation↗
DOE OSTI2022

Perovskite superlattices with efficient carrier dynamics

Compared with their three-dimensional (3D) counterparts, low-dimensional metal halide perovskites (2D and quasi-2D; B 2 A n-1 M n X 3n+1 , such as B = R-NH 3 + , A = HC(NH 2 ) 2 + , Cs + ; M = Pb 2+ , Sn 2+ ; X = Cl - , Br - , I - ) with periodic inorganic-organic structures have shown promising stability and hysteresis-free electrical performance. However, their unique multiple-quantum-well structure limits the device efficiencies because of the grain boundaries and randomly oriented quantum wells in polycrystals. In single crystals, the carrier transport through the thickness direction is hindered by the layered insulating organic spacers. Furthermore, the strong quantum confinement from the organic spacers limits the generation and transport of free carriers. Also, lead-free metal halide perovskites have been developed but their device performance is limited by their low crystallinity and structural instability 11 . Here, in this paper, we report a low-dimensional metal halide perovskite BA 2 MA n-1 Sn n I 3n+1 (BA, butylammonium; MA, methylammonium; n = 1, 3, 5) superlattice by chemical epitaxy. The inorganic slabs are aligned vertical to the substrate and interconnected in a criss-cross 2D network parallel to the substrate, leading to efficient carrier transport in three dimensions. A lattice-mismatched substrate compresses the organic spacers, which weakens the quantum confinement. The performance of a superlattice solar cell has been certified under the quasi-steady state, showing a stable 12.36% photoelectric conversion efficiency. Moreover, an intraband exciton relaxation process may have yielded an unusually high open-circuit voltage (V OC ).

36 MATERIALS SCIENCE↗
DOE OSTI2019

Three-dimensional electroactive ZnO nanomesh directly derived from hierarchically self-assembled block copolymer thin films

Three-dimensional (3D) nanoarchitectures can offer enhanced material properties, such as large surface areas that amplify the structures’ interaction with environments making them useful for various sensing applications. Self-assembled block copolymers (BCPs) can readily generate various 3D nanomorphologies, but their conversion to useful inorganic materials remains one of the critical challenges against the practical application of self-assembled BCPs. This work reports the vapor-phase infiltration synthesis of optoelectrically active, 3D ZnO nanomesh architectures by combining hierarchical successive stacking of self-assembled, lamellar-phase polystyrene- block -poly(2-vinylpyridine) (PS- b -P2VP) BCP thin films and a modified block-selective vapor-phase material infiltration protocol. The 3D ZnO nanomesh exhibits optoelectrical functionality, featuring stack-layer-number-dependent electrical conductance resembling the percolative transport originating from the intrinsic morphological network connectivity of the lamellar BCP pattern with symmetric block ratio. Furthermore, the results not only illustrate the first demonstration of electrical functionality based on the ZnO nanoarchitecture directly generated by the infiltration synthesis in self-assembled BCP thin films but also present a new, large-area scalable, metal oxide thin film nanoarchitecture fabrication method utilizing industry-compatible polymer solution coating and atomic layer deposition. Given the large surface area, three-dimensional porosity, and readily scalable fabrication procedures, the generated ZnO nanomesh promises potential applications as an efficient active medium in chemical and optical sensors.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Single crystal CVD diamond membranes for betavoltaic cells

A single crystal diamond large area thin membrane was assembled as a p-doped/Intrinsic/Metal (PIM) structure and used in a betavoltaic configuration. When tested with a 20 keV electron beam from a high resolution scanning electron microscope, we measured an open circuit voltage (V{sub oc}) of 1.85 V, a charge collection efficiency (CCE) of 98%, a fill-factor of 80%, and a total conversion efficiency of 9.4%. These parameters are inherently linked to the diamond membrane PIM structure that allows full device depletion even at 0 V and are among the highest reported up to now for any other material tested for betavoltaic devices. It enables to drive a high short-circuit current I{sub sc} up to 7.12 μA, to reach a maximum power P{sub max} of 10.48 μW, a remarkable value demonstrating the high-benefit of diamond for the realization of long-life radioisotope based micro-batteries.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

NiFe Nanoparticle Nest Supported on Graphene as Electrocatalyst for Highly Efficient Oxygen Evolution Reaction

Abstract Designing cost‐efffective electrocatalysts for the oxygen evolution reaction (OER) holds significant importance in the progression of clean energy generation and efficient energy storage technologies, such as water splitting and rechargeable metal–air batteries. In this work, an OER electrocatalyst is developed using Ni and Fe precursors in combination with different proportions of graphene oxide. The catalyst synthesis involved a rapid reduction process, facilitated by adding sodium borohydride, which successfully formed NiFe nanoparticle nests on graphene support (NiFe NNG). The incorporation of graphene support enhances the catalytic activity, electron transferability, and electrical conductivity of the NiFe‐based catalyst. The NiFe NNG catalyst exhibits outstanding performance, characterized by a low overpotential of 292.3 mV and a Tafel slope of 48 mV dec −1 , achieved at a current density of 10 mA cm − 2 . Moreover, the catalyst exhibits remarkable stability over extended durations. The OER performance of NiFe NNG is on par with that of commercial IrO 2 in alkaline media. Such superb OER catalytic performance can be attributed to the synergistic effect between the NiFe nanoparticle nests and graphene, which arises from their large surface area and outstanding intrinsic catalytic activity. The excellent electrochemical properties of NiFe NNG hold great promise for further applications in energy storage and conversion devices.

Chemistry↗
DOE OSTI2019

Operation of a 50-kW th chemical looping combustion test facility under autothermal conditions

The United States Department of Energy is developing transformational fossil fuel combustion technologies that result in more efficient power cycles and/or substantial reductions in GHG emissions. Chemical Looping Combustion (CLC) has the potential to achieve a lower cost of electricity than a supercritical pulverized coal power plant with an amine absorption system. Although the concept and research on chemical looping has a long history, CLC has numerous technical issues that must be addressed prior to a commercial debut. This effort is directed toward the following major issues for CLC: (1) demonstrating continuous solids handling, operability, and reactor performance at autothermal conditions and (2) preliminary assessments of oxygen carrier attrition and relative material make-up costs. These are critical issues that should be addressed under realistic conditions prior to directing resources toward larger scale demonstrations. This paper will also describe NETL’s small 50-kWth natural gas circulating CLC test facility located in Morgantown, WV. Despite its small size, this experimental test unit has operated at autothermal conditions for 11 h using a copper-iron-alumina oxygen carrier developed at NETL. Here, this paper will describe the test facility and operating experiences using NETL’s “Gen 2.0” oxygen carrier material. Natural gas conversion to CO2 ranged from 70 to 90% over approximately 75 oxidation-reduction cycles during the autothermal operating period. Estimates for the process specific attrition rate during autothermal operation are also presented. Finally, estimates for the oxygen carrier makeup cost, specific to the NETL process configuration, are several orders of magnitude greater than the NETL target. Future work should focus on reducing the oxygen carrier material cost and improving the attrition resistance of the oxygen carrier material under autothermal test conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Pulsed anodic arc discharge for the synthesis of carbon nanomaterials

Pulsed arc discharges can improve arc control and tailor the ablation process in the production of 1D and 2D nanostructures from carbon anodes. In this work, low-dimensional carbon nanoparticles have been generated by means of anodic arc discharge in helium atmosphere excited with a square-wave modulated signal (1–5 Hz, 10% duty cycle). The discharges were performed between two graphite electrodes with maximal peak current of 250 A and maximal voltage of 65 V. The erosion rates and conversion efficiency of the ablated anode are compared to reference samples grown in DC steady arc mode. Ablation rates in pulsed arcs are typically of the order of 1 mg/s. Combination of fast Langmuir probe diagnostics and optical emission spectroscopy provided plasma parameters of the discharges at the arc column. Ranges of 10 16 –10 17 m -3 for electron density and 0.5–2.0 eV for electron temperature are estimated. The obtained samples were characterized with Raman spectroscopy and scanning electron microscopy. The deposit on the cathode after pulsed arc consisted of carbon nanostructures such as graphene nano-platelets and carbon nanotubes. Erosion dynamics of pulsed arc discharge has been described in terms of a global model and compared to steady arc discharge. A correlation is identified among discharge regimes, optical emission patterns and ablation modes. In conclusion, pulsed anodic arc discharge is a very efficient source of carbon nanomaterials. The large control of the discharge characteristics will permit to tailor accurately the production and the properties of carbon nanotubes and graphene. Here, this deposition method is promising for the fabrication of semiconducting nanomaterials with tuneable electrical and optical properties.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Semiconductor Thermal and Electrical Properties Decoupled by Localized Phonon Resonances

Abstract Thermoelectric materials convert heat into electricity through thermally driven charge transport in solids or vice versa for cooling. To compete with conventional energy‐conversion technologies, a thermoelectric material must possess the properties of both an electrical conductor and a thermal insulator. However, these properties are normally mutually exclusive because of the interconnection between scattering mechanisms for charge carriers and phonons. Recent theoretical investigations on sub‐device scales have revealed that nanopillars attached to a membrane exhibit a multitude of local phonon resonances, spanning the full spectrum, that couple with the heat‐carrying phonons in the membrane and cause a reduction in the in‐plane thermal conductivity, with no expected change in the electrical properties because the nanopillars are outside the pathway of voltage generation and charge transport. Here this effect is demonstrated experimentally for the first time by investigating device‐scale suspended silicon membranes with GaN nanopillars grown on the surface. The nanopillars cause up to 21% reduction in the thermal conductivity while the power factor remains unaffected, thus demonstrating an unprecedented decoupling in the semiconductor's thermoelectric properties. The measured thermal conductivity behavior for coalesced nanopillars and corresponding lattice‐dynamics calculations provide evidence that the reductions are mechanistically tied to the phonon resonances. This finding paves the way for high‐efficiency solid‐state energy recovery and cooling.

Spann, Bryan T.↗
DOE OSTI2021

Low-Cost Intermediate-Temperature Fuel-Flexible Protonic-Ceramic Fuel Cell and Stack

Large, centralized power plants are currently the most efficient way to convert fuels such as natural gas to electricity. Fuel cells, however, could become highly efficient generators across a range of sizes from tens of watts to megawatts. In particular, fuel cells with an electrical efficiency of 50% could displace small generators of 25 kilowatts (kW) or less in applications such as remote power, telecommunications, and residential cogeneration. Current 25 kW natural gas generators employing internal combustion engines are typically only 25-30% efficient and expensive to maintain. Furthermore, fuel cells could provide valuable services to the grid, such as the ability to ramp power up or down in response to load conditions. While there are different types of fuel cells, each with their strengths and weaknesses, fuel cells generally are very expensive. For example, lower temperature fuel cells can be started up quickly, but require highly pure hydrogen fuel and expensive catalysts. High-temperature fuel cells can operate on a range of fuels, but they have costly system components and can degrade rapidly.

30 DIRECT ENERGY CONVERSION↗