Search NASA⌕ Search

SEARCH · Search NASA

Results for “interface diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

X-ray reciprocal space mapping of dislocation-mediated strain relaxation during InGaAs/GaAs(001) epitaxial growth

Dislocation-mediated strain relaxation during lattice-mismatched InGaAs/GaAs(001) heteroepitaxy was studied through in situ x-ray reciprocal space mapping (in situ RSM). At the synchrotron radiation facility SPring-8, a hybrid system of molecular beam epitaxy and x-ray diffractometry with a two-dimensional detector enabled us to perform in situ RSM at high-speed and high-resolution. Using this experimental setup, four results in terms of film properties were simultaneously extracted as functions of film thickness. These were the lattice constants, the diffraction broadenings along in-plane and out-of-plane directions, and the diffuse scattering. Based on correlations among these results, the strain relaxation processes were classified into four thickness ranges with different dislocation behavior. In addition, the existence of transition regimes between the thickness ranges was identified. Finally, the dominant dislocation behavior corresponding to each of the four thickness ranges and transition regimes was noted.

36 MATERIALS SCIENCE↗

Cu-doped CdS and its application in CdTe thin film solar cell

Cu is widely used in the back contact formation of CdTe thin film solar cells. However, Cu is easily to diffuse from the back contact into the CdTe absorber layer and even to the cell junction interface CdS/CdTe. This phenomenon is generally believed to be the main factor affecting the CdTe solar cell stability. In this study Cu was intentionally doped in CdS thin film to study its effect on the microstructural, optical and electrical properties of the CdS material. Upon Cu doping, the V{sub Cd{sup −}} and the surface-state-related photoluminescence emissions were dramatically decreased/quenched. The presence of Cu atom hindered the recrystallization/coalescence of the nano-sized grains in the as-deposited CdS film during the air and the CdCl{sub 2} annealing. CdTe thin film solar cell fabricated with Cu-doped CdS window layers demonstrated much decreased fill factor, which was induced by the increased space-charge recombination near the p-n junction and the worsened junction crystalline quality. Temperature dependent current-voltage curve measurement indicated that the doped Cu in the CdS window layer was not stable at both room and higher temperatures.

36 MATERIALS SCIENCE↗

Superconducting Tunneling Spectroscopy of Spin-Orbit Coupling and Orbital Depairing in Nb : SrTiO 3

We have examined here the intrinsic spin-orbit coupling and orbital depairing in thin films of Nb-doped ${\mathrm{SrTiO}}_{3}$ by superconducting tunneling spectroscopy. The orbital depairing is geometrically suppressed in the two-dimensional limit, enabling a quantitative evaluation of the Fermi level spin-orbit scattering using Maki's theory. The response of the superconducting gap under in-plane magnetic fields demonstrates short spin-orbit scattering times ${{\tau}}_{\mathrm{so}}{\le}1.1\text{ }\text{ }\mathrm{ps}$. Analysis of the orbital depairing indicates that the heavy electron band contributes significantly to pairing. These results suggest that the intrinsic spin-orbit scattering time in ${\mathrm{SrTiO}}_{3}$ is comparable to those associated with Rashba effects in ${\mathrm{SrTiO}}_{3}$ interfacial conducting layers and can be considered significant in all forms of superconductivity in ${\mathrm{SrTiO}}_{3}$.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Buffer-layer effect on the ferromagnetism of manganite heterojunctions

Identifying and understanding interfacial magnetic structures of transition-metal oxides are of great importance not only for fundamental physics but also for potential device applications. Among them, manganite and ruthenate heterostructures have attracted considerable interest due to their intriguing interfacial properties induced by complex magnetic interactions. Here, we report the observation of dramatic buffer-layer dependence of ferromagnetism in ultrathin (L⁢a 2/3 ⁢C⁢a 1/3 )⁢Mn⁢O 3 (LCMO)-based heterostructures. Though all trilayers are nonmetallic, the SrRu⁢O 3 -buffered LCMO trilayer exhibits enhanced ferromagnetism with the Curie temperature (𝑇 C ∼ 198K) much higher than for CaRu⁢O 3 (𝑇 C ∼ 99K)- and SrTi⁢O 3 (𝑇 C ∼ 42K)-buffered counterparts, as well as the monolithic LCMO films with similar thickness. Combining atomically resolved scanning transmission electron microscopy imaging with electron energy loss spectroscopy mapping, we reveal that asymmetric interfaces exist in the SrRu⁢O 3 buffered trilayer, with one exhibiting 1 unit-cell Sr diffusion into LCMO, which is responsible for the 𝑇 C enhancement. In contrast, charge transfer, which has been proposed previously as a possible mechanism, is excluded in this study. In conclusion, our results may pave a promising road toward effective atomic control of interfacial magnetism.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Sealed Attics Exposed to Two Years of Weathering in a Hot and Humid Climate

Field studies in a hot, humid climate were conducted to investigate the thermal and hygrothermal performance of ventilated attics and non-ventilated semi-conditioned attics sealed with open-cell and with closed-cell spray polyurethane foam insulation. Moisture pin measurements made in the sheathing and absolute humidity sensor data from inside the foam and from the attic air show that moisture is being stored in the foam. The moisture in the foam diffuses to and from the sheathing dependent on the pressure gradient at the foam-sheathing interface which is driven by the irradiance and night-sky radiation. Ventilated attics in the same hot, humid climate showed less moisture movement in the sheathing than those sealed with either open- or closed-cell spray foam. In the ventilated attics the relative humidity drops as the attic air warms; however, the opposite was observed in the sealed attics. Peaks in measured relative humidity in excess of 80 90% and occasionally near saturation (i.e., 100%) were observed from solar noon till about 8 PM on hot, humid days. The conditioned space of the test facility is heated and cooled by an air-to-air heat pump. Therefore the partial pressure of the indoor air during peak irradiance is almost always less than that observed in the sealed attics. Field data will be presented to bring to light the critical humidity control issues in sealed attics exposed to hot, humid climates.

insulation↗

Origin of ferromagnetism enhancement in bi-layer chromium-doped indium zinc oxides

This work demonstrates that by controlling the rapid thermal annealing temperature, amorphous chromium-doped indium zinc oxide films develop an amorphous-crystalline bi-layer structure and show magnetization up to {approx}30 emu/cm{sup 3}. The crystalline layer arises from significant out-diffusion of Zn from surfaces, leading to a large difference in the Zn:In ratio in amorphous and crystalline layers. Doped Cr ions in amorphous and crystalline layers form different valence configurations, creating a charge reservoir which transfers electrons through amorphous-crystalline interfaces and in turn enhances ferromagnetism.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Instability, intermixing and electronic structure at the epitaxial LaAlO3/SrTiO3(001) heterojunction

The question of stability against diffusional mixing at the prototypical LaAlO3/SrTiO3(001) interface is explored using a multi-faceted experimental and theoretical approach. We combine analytical methods with a range of sensitivities to elemental concentrations and spatial separations to investigate interfaces grown using onaxis pulsed laser deposition. We also employ computational modeling based on the density function theory as well as classical force fields to explore the energetic stability of a wide variety of intermixed atomic configurations relative to the idealized, atomically abrupt model. Statistical analysis of the calculated energies for the various configurations is used to elucidate the relative thermodynamic stability of intermixed and abrupt configurations. We find that on both experimental and theoretical fronts, the tendency toward intermixing is very strong. We have also measured and calculated key electronic properties such as potential energy gradients and valence band discontinuity at the interface. We find no measurable electric field in either the LaAlO3 or SrTiO3, and that the valence band offset is near zero, partitioning the band discontinuity almost entirely to the conduction band edge. Significantly, we find it is not possible to account for these electronic properties theoretically without including extensive intermixing in our physical model of the interface. The atomic configurations which give the greatest electrostatic stability are those that eliminate the interface dipole by intermixing, calling into question the conventional explanation for conductivity at this interface – electronic reconstruction. Rather, evidence is presented for La indiffusion and doping of the SrTiO3 below the interface as being the cause of the observed conductivity.

36 MATERIALS SCIENCE↗

Comprehensive demonstration of spin Hall Hanle effects in epitaxial Pt thin films

In this work, we demonstrate a nonlinear Hall effect due to the boundary spin accumulation in Pt films grown on Al 2 O 3 substrates. This Hall effect and the previously demonstrated Hanle magnetoresistance provide a complete picture of the spin-precession control of the spin and charge transport at the boundary of a spin-orbit coupled material, which we refer to as spin Hall Hanle effects (SHHE). We also show that the SHHE can be employed to measure the spin diffusion length, the spin Hall angle, and the spin relaxation time of heavy metal without the need of magnetic interface or the input from other measurements. The comprehensive demonstration of SHHE in such a simple system suggests they may be ubiquitous and needs to be considered for unraveling the spin and charge transport in more complex thin-film structures of spin-orbit coupled materials.

36 MATERIALS SCIENCE↗

In situ ceramic layer growth on coated fuel particles dispersed in a zirconium metal matrix

The extent and nature of the chemical interaction between the outermost coating layer of coated fuel particles embedded in zirconium metal during fabrication of metal matrix microencapsulated fuels was examined. Various particles with outermost coating layers of pyrocarbon, SiC, and ZrC have been investigated in this study. ZrC-Zr interaction was least substantial while PyC-Zr reaction can be exploited to produce a ZrC layer at the interface in an in situ manner. The thickness of the ZrC layer in the latter case can be controlled by adjusting the time and temperature during processing. The kinetics of ZrC layer growth is significantly faster from what is predicted using literature carbon diffusivity data in ZrC. SiC-Zr interaction is more complex and results in formation of various chemical phases in a layered aggregate morphology at the interface.

Terrani, Kurt A↗

Delayed plastic relaxation limit in SiGe islands grown by Ge diffusion from a local source

The hetero-epitaxial strain relaxation in nano-scale systems plays a fundamental role in shaping their properties. Here, the elastic and plastic relaxation of self-assembled SiGe islands grown by surface-thermal-diffusion from a local Ge solid source on Si(100) are studied by atomic force and transmission electron microscopies, enabling the simultaneous investigation of the strain relaxation in different dynamical regimes. Islands grown by this technique remain dislocation-free and preserve a structural coherence with the substrate for a base width as large as 350 nm. The results indicate that a delay of the plastic relaxation is promoted by an enhanced Si-Ge intermixing, induced by the surface-thermal-diffusion, which takes place already in the SiGe overlayer before the formation of a critical nucleus. The local entropy of mixing dominates, leading the system toward a thermodynamic equilibrium, where non-dislocated, shallow islands with a low residual stress are energetically stable. These findings elucidate the role of the interface dynamics in modulating the lattice distortion at the nano-scale, and highlight the potential use of our growth strategy to create composition and strain-controlled nano-structures for new-generation devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Modeling solar thermochemical splitting of CO2 using metal oxide and a CR5.

A two-dimensional, multi-physics computational model based on the finite-element method is developed for simulating the process of solar thermochemical splitting of carbon dioxide (CO{sub 2}) using ferrites (Fe{sub 3}O{sub 4}/FeO) and a counter-rotating-ring receiver/recuperator or CR5, in which carbon monoxide (CO) is produced from gaseous CO{sub 2}. The model takes into account heat transfer, gas-phase flow and multiple-species diffusion in open channels and through pores of the porous reactant layer, and redox chemical reactions at the gas/solid interfaces. Results (temperature distribution, velocity field, and species concentration contours) computed using the model in a case study are presented to illustrate model utility. The model is then employed to examine the effects of injection rates of CO{sub 2} and argon neutral gas, respectively, on CO production rate and the extent of the product-species crossover.

14 SOLAR ENERGY↗

Electron beam induced evolution in Au, Ag, and interfaced heterogeneous Au/Ag nanoparticles

Sintering and sublimation process of nanoparticles made of Ag, Au, and interfaced Ag/Au heterodimers has been investigated by in-situ transmission electron microscopy at room temperature. Such process is driven by the illumination of high-energy electron beam accelerated at 200kV that promotes atom diffusion in the physically contacted nanoparticles. Upon electron illumination, adjacent Au nanoparticles gradually merge together to form a larger particle along with the reduction of surface area despite that orientated attachment is not observed. The nanoparticle fusion process is significantly different from the well-established thermal diffusion mechanism. In addition to the similar fusion process, Ag nanoparticles undergo apparent sublimation because the transferred energy from electron beam to nanoparticles is higher than the surface binding energy of Ag atoms when the electron scattering angle is larger than 112°. The electron beam illumination can transform the interfaced Au/Ag dimers to Au@Ag core-shell particles followed by a slow sublimation of the Ag shells. Both diffusion and sublimation of Ag atoms are dependent on the intensity of electron beam, i.e., higher beam intensity is favorable to accelerate both process.

36 MATERIALS SCIENCE↗

Feasibility Study of Making Metallic Hybrid Materials Using Additive Manufacturing

In this paper, a metallic hybrid structure, consisting of an Inconel-718 matrix and a Co-Cr internal structure, was successfully manufactured using laser direct energy deposition process. Characterizations were performed using energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), neutron-computed tomography (nCT), and electron back-scatter diffraction (EBSD) to verify the interfaces between Co-rich and Ni-rich phases. nCT revealed the internal structures to be continuous without cracking or significant intermixing due to inter-diffusion of Co and Ni (i.e., dissolved boundaries between the two structures). Minor porosity was detected. EBSD confirmed a good bond at the granular level. No precipitate phases were detected with XRD. Finally, EDS revealed dilution/intermixing between the Co and Ni interfaces presumably due to melt-pool overlay between the matrix and the internal structures.

36 MATERIALS SCIENCE↗

Current-perpendicular-to-plane giant magnetoresistance using Co{sub 2}Fe(Ga{sub 1-x}Ge{sub x}) Heusler alloy

We investigated the current-perpendicular-to-plane giant magnetoresistance (CPP-GMR) of pseudo spin valves (PSVs) using ferromagnetic (FM) Heusler alloy Co{sub 2}Fe(Ga{sub 1-x}Ge{sub x}) (x = 0, 0.5, and 1) layers and an Ag spacer layer. The FM layer with x = 0.5 gave rise to the highest MR output, {Delta}RA = 8.7 m{Omega}{center_dot}{mu}m{sup 2}, at room temperature with 10 nm thick Heusler alloy layers. The MR output increased with increasing annealing temperature, T{sub a}, with a maximum at T{sub a} = 500 Degree-Sign C. Transmission electron microscopy showed no visible changes in the layered structure; however, energy dispersive x-ray analysis indicated a considerable diffusion of Ga and Ge into the other layers by annealing at T{sub a} = 550 Degree-Sign C. The {Delta}RA dependence on the thickness of the FM layers indicated that both high bulk and interface spin asymmetries contribute to the high MR output.

36 MATERIALS SCIENCE↗

Understanding the interface interaction between U3Si2 fuel and SiC cladding

Abstract Triuranium disilicide (U 3 Si 2 ) fuel with silicon carbide (SiC) composite cladding is being considered as an advanced concept/accident tolerant fuel for light water reactors thus, understanding their chemical compatibility under operational and accident conditions is paramount. Here we provide a comprehensive view of the interaction between U 3 Si 2 and SiC by utilizing density functional theory calculations supported by diffusion couple experiments. From the calculated reaction energies, we demonstrate that triuranium pentasilicide (U 3 Si 5 ), uranium carbide (UC), U 20 Si 16 C 3 , and uranium silicide (USi) phases can form at the interface. A detailed study of U 3 Si 2 and SiC defect formation energies of the equilibrated materials yielding the interfacial phases U 20 Si 16 C 3 , U 3 Si 5 and UC reveal a thermodynamic driving force for generating defects in both fuel and cladding. The absence of either the U 3 Si 2 or SiC phase, however, causes the defect formation energies in the other phase to be positive, removing the driving force for additional interfacial reactions. The diffusion couple experiments confirm the conclusion with demonstrated restricted formation of U 3 Si 5 , UC, and U 20 Si 16 C 3 /USi phases at the interface. The resulting lack of continuous interaction between the U 3 Si 2 and SiC, reflects the diminishing driving force for defect formation, demonstrating the substantial stability of this fuel-cladding system.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Quantifying the Impact of Electric Fields on the Local Structure and Migration of Potassium Ions at the Orthoclase (001) Surface

Developing an understanding of the response of mineral/water interfaces to applied electric fields is central to detecting and interpreting signatures of interfacial processes in the subsurface. Here we focus density functional theory calculations on understanding K + cation binding and diffusion across the (001) surface of orthoclase feldspar under various applied electric fields with and without surface hydration. The calculations reveal how water ligands labilize surface K + cations for diffusion while also increasing their sensitivity to electric field effects on the binding energy at different surface sites. The calculations also show how the direction and strength of the electric field systematically affect surface cation mobility, sorption, and hydration behavior. Specifically, electric fields directed toward the surface increase the potassium binding energies, facilitate K + diffusion across multiple binding sites, and increase the propensity of surface K + ions to lose their hydration shells. Furthermore, the findings help fill a major knowledge gap into the impact of electric fields on mineral/water interface structure and dynamics more generally, featuring in this case a commonly found type of feldspar involved in a multitude of atmospheric and geochemical processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Atomistic observation on diffusion-mediated friction between single-asperity contacts

Super-lubricity, a sliding regime in which friction almost vanishes, has been well-documented with the advent of atomic force microscopy (AFM) and molecular dynamics (MD) simulation due to its enormous implications for manufacturing micro-/nano-electromechanical systems (MEMS/NEMS). Nevertheless, the atomistic mechanisms for super-lubricious behaviors are still elusive, primarily due to a lack of direct observation of interface at atomic resolution during frictional process. Here by using in situ high-resolution transmission electron microscopy (HRTEM) coupled with AFM, we report diffusion-mediated formation of a loosely-packed interfacial layer between two metallic asperities at infinitesimal normal forces, which is responsible for the sliding regime, super-lubricity exhibiting ultra-low friction forces and continuous sliding. By contrast, the loosely-packed interfacial layer vanishes along with the super-lubricity, leading to typical stick-slip friction. Additionally, in situ TEM observation and MD simulations reveals the crucial role that atom diffusion plays in atomic friction, and provides new insights into the fundamental mechanisms of super-lubricity.

42 ENGINEERING↗