Search NASA⌕ Search

SEARCH · Search NASA

Results for “phase separation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Cubic Form of Pb 2-x Sn x S 2 Stabilized through Size Reduction to the Nanoscale

We demonstrate the synthesis of semiconductor Pb 2-x Sn x S 2 nanocrystals with a cubic rock salt crystal structure in a composition range where this structure is unstable in the bulk. The cubic Pb 2-x Sn x S 2 nanocrystals were prepared using a modified hot injection colloidal synthetic route. The x value is in the range 0.40 < x < 1. Even though these compositions lie in a region of the PbS-SnS phase diagram where no single phase exists, and despite the fact that PbSnS 2 is a distorted orthorhombic phase, the Pb 2-x Sn x S 2 nanocrystals are single phase solid solutions with cubic NaCl-type structure. Experimental evidence for this derives from powder X-ray diffraction (PXRD), electron diffraction, and pair distribution function (PDF) analysis. Elemental compositions determined using scanning transmission electron microscopy/energy dispersive spectroscopy (STEM/EDS), inductively coupled plasma-atomic emission spectroscopy (ICP-AES), and electron energy loss spectroscopy (EELS) reveal a composition close to the nominal ones. The band gaps of the Pb 2-x Sn x S 2 nanocrystals (0.52-0.57 eV) are blue-shifted by quantum confinement relative to that of the hypothetical cubic PbSnS2 phase which density functional theory (DFT) calculations show to be much narrower (0.2 eV) than in the case of orthorhombic PbSnS 2 (1.1 eV). The Pb 2-x Sn x S 2 nanocrystals exhibit a well-defined band gap in the near-IR region and are stable up to 300 °C above which they phase separate into cubic PbS and orthorhombic α-SnS.

36 MATERIALS SCIENCE↗

Simultaneously tuning dense skin and porous substrate of asymmetric hollow fiber membranes for efficient purification of aggressive natural gas

Highly permeable, selective, and stable asymmetric membranes are required to replace the traditional separation approaches for natural gas purification with higher energy efficiency and smaller footprints. In this work, we report on the design and engineering of defect-free asymmetric hollow fiber membranes with a thin dense skin and highly porous substrate to effectively deal with aggressive natural gas. A crosslinkable polymer with rigid molecular structure and high molecular weight was synthesized for developing spinning dope with desirable solution properties. Phase separation behavior of the polymer was carefully controlled by systematic formulation of the dope composition and optimizing spinning conditions, thereby realizing simultaneously tuning dense skins and porous substrates of the spun asymmetric hollow fiber membranes. The crosslinked hollow fiber membrane, with well-preserved delicate asymmetric nanostructures, exhibited unprecedentedly high and stable separation performance for long-term processing extremely aggressive CO 2 /CH 4 mixtures (with pressure up to 820 psi containing C6(+) hydrocarbons), thereby showing great potential for practical application of natural gas purification. This research provides a new platform to create hollow fiber membranes with both high permeance and plasticization resistance in natural gas service.

36 MATERIALS SCIENCE↗

A New Approach to Processing Rutile from Ilmenite Ore Utilizing the Instability of Pseudobrookite

Rutile (TiO{sub 2}) is a vital industrial material used in pigments and in many other valuable chemicals. A new production process to synthesize rutile from natural ilmenite ore and therefore overcome the environmental problems associated with conventional rutile extraction processes was developed. Because the simple phase separation of ilmenite (FeTiO{sub 3}) into Fe{sub 2}O{sub 3} and TiO{sub 2} occurs due to air oxidation, extracting TiO{sub 2} by removing Fe{sub 2}O{sub 3} may be possible if pseudobrookite (Fe{sub 2}TiO{sub 5}), known as a stable compound in the Fe{sub 2}O{sub 3}-TiO{sub 2} system at higher temperatures, is of unstable phase in the lower-temperature range. In order to clarify the potential of this new approach, the phase stability of pseudobrookite in the lower-temperature range is discussed. The free energy of formation of pseudobrookite from the respective pure oxides was measured at temperatures ranging from 1073 K to 1473 K by the chemical equilibrium technique using Al{sub 2}O{sub 3} as the reference oxide. The observed free energy is given as a function of temperature: ∆G{sup 0} = 7715 − 7.7T (J/mol). The results indicate that pseudobrookite has an unstable phase below 929 K. This has important industrial implications as a new approach to producing synthetic rutile from ilmenite ore by oxidation at low temperatures and acid leaching.

36 MATERIALS SCIENCE↗

Hydration of MgO/SiO{sub 2} and Portland cement mixtures: A structural investigation of the hydrated phases by means of X-ray diffraction and solid state NMR spectroscopy

The phases formed during the hydration of several MgO/SiO{sub 2} and Portland cement mixtures were investigated by performing X-ray diffraction and {sup 29}Si and {sup 27}Al solid state NMR experiments on samples hydrated for 1, 7 and 28 days. The structural properties and relative amount of magnesium silicate hydrate (M-S-H) and calcium silicate hydrate (C-S-H) gels, which form as separate phases, were found to significantly depend on the initial composition of the mixtures. Faster hydration kinetics was observed for all mixtures with respect to the “pure” MgO/SiO{sub 2} and Portland cement samples, pH and excess of silica playing a major role. Moreover, the addition of the MgO/SiO{sub 2} mixture to Portland cement affects the formation of aluminum-containing hydrated phases.

36 MATERIALS SCIENCE↗

The possibility of hydrogen-water demixing in Uranus, Neptune, K2-18 b and TOI-270 d

Context. The internal structures of Uranus and Neptune remain unknown. In addition, sub-Neptunes are now thought to be the most common type of exoplanets. Improving our understanding of the physical processes that govern the interiors of such planets is therefore essential. Phase separation between planetary constituents may occur, in particular, hydrogen-water immiscibility in cold, water-rich intermediate-mass planets. Aims. We assess whether hydrogen-water demixing could occur in Uranus, Neptune, K2-18 b and TOI-270 d, and investigate its effect on the planetary evolution and inferred internal structure. Methods. We couple planetary evolution models with recent ab initio calculations of the hydrogen-water phase diagram, allowing for temperature shifts to account for uncertainties in miscibility gaps. Results. We find that demixing may occur and could lead to a complete depletion of water in the outermost regions of Uranus and Neptune. Temperature offsets of up to 1100 K lead to a depleted region comprising as much as 16% of the planet’s mass, and an increase in planetary radius by nearly 20%. For K2-18 b, our models suggest that hydrogen-water demixing is ongoing and may explain the absence of water features in its JWST spectrum. A temperature offset of 500 K is required to get a complete depletion of water in the atmosphere of K2-18b. TOI-270d may also have experienced hydrogen-water demixing. When applying a similar temperature offset on the phase diagram as for K2-18 b, we find a partial depletion of water in the atmosphere of TOI-270 d, consistent with JWST’s detection of water. Conclusions. Hydrogen-water immiscibility may play a key role in shaping the structure and evolution of both Solar System giant planets like Uranus and Neptune, and cold/temperate exoplanets such as K2-18 b and TOI-270 d. Accounting for such internal processes is crucial to accurately interpret atmospheric observations from current (e.g., JWST) and upcoming (e.g., ARIEL) missions.

planets and satellites: composition↗

Coarsening in Solid-Liquid Mixtures Studied on the Space Shuttle

Ostwald ripening, or coarsening, is a process in which large particles in a two-phase mixture grow at the expense of small particles. It is a ubiquitous natural phenomena occurring in the late stages of virtually all phase separation processes. In addition, a large number of commercially important alloys undergo coarsening because they are composed of particles embedded in a matrix. Many of them, such as high-temperature superalloys used for turbine blade materials and low-temperature aluminum alloys, coarsen in the solid state. In addition, many alloys, such as the tungsten-heavy metal systems, coarsen in the solid-liquid state during liquid phase sintering. Numerous theories have been proposed that predict the rate at which the coarsening process occurs and the shape of the particle size distribution. Unfortunately, these theories have never been tested using a system that satisfies all the assumptions of the theory. In an effort to test these theories, NASA studied the coarsening process in a solid-liquid mixture composed of solid tin particles in a liquid lead-tin matrix. On Earth, the solid tin particles float to the surface of the sample, like ice in water. In contrast, in a microgravity environment this does not occur. The microstructures in the ground- and space-processed samples (see the photos) show clearly the effects of gravity on the coarsening process. The STS-83-processed sample (right image) shows nearly spherical uniformly dispersed solid tin particles. In contrast, the identically processed, ground-based sample (left image) shows significant density-driven, nonspherical particles, and because of the higher effective solid volume fraction, a larger particle size after the same coarsening time. The "Coarsening in Solid-Liquid Mixtures" (CSLM) experiment was conducted in the Middeck Glovebox facility (MGBX) flown aboard the shuttle in the Microgravity Science Laboratory (MSL-1/1R) on STS-83/94. The primary objective of CSLM is to measure the temporal evolution of the solid particles during coarsening.

Caruso, John J.↗

Computer code for gas-liquid two-phase vortex motions: GLVM

A computer program aimed at the phase separation between gas and liquid at zero gravity, induced by vortex motion, is developed. It utilizes an explicit solution method for a set of equations describing rotating gas-liquid flows. The vortex motion is established by a tangential fluid injection. A Lax-Wendroff two-step (McCormack's) numerical scheme is used. The program can be used to study the fluid dynamical behavior of the rotational two-phase fluids in a cylindrical tank. It provides a quick/easy sensitivity test on various parameters and thus provides the guidance for the design and use of actual physical systems for handling two-phase fluids.

Yeh, T. T.↗

Biomolecular transport and separation in nanotubular networks.

Cell membranes are dynamic substrates that achieve a diverse array of functions through multi-scale reconfigurations. We explore the morphological changes that occur upon protein interaction to model membrane systems that induce deformation of their planar structure to yield nanotube assemblies. In the two examples shown in this report we will describe the use of membrane adhesion and particle trajectory to form lipid nanotubes via mechanical stretching, and protein adsorption onto domains and the induction of membrane curvature through steric pressure. Through this work the relationship between membrane bending rigidity, protein affinity, and line tension of phase separated structures were examined and their relationship in biological membranes explored.

59 BASIC BIOLOGICAL SCIENCES↗

Self‐Assembled Membranes for High Ion Selectivity and Proton Blocking in Electrochemical Applications

Anion-exchange membranes (AEMs) with high anion/cation selectivity and exceptional proton-blocking ability are critical for applications such as bipolar membrane electrodialysis and electrochemical acid recovery. However, existing AEMs are constrained by a trade-off between ionic conductivity and selectivity, largely due to the intrinsic coupling between charge density and water content, and they suffer from excessive proton leakage facilitated by the Grotthuss hopping mechanism. In this work, poly(vinylimidazolium) membranes functionalized with long alkyl side chains that self-assemble into well-defined microphase-separated morphologies stabilized by hydrophobic and electrostatic interactions are reported. These unique structures localize the charge density along the polymer backbone to promote fast and selective ion transport. As a result, these membranes exhibit ionic conductivities and counter-ion diffusivities surpassing those of conventional homogeneous membranes, along with unprecedented counter-ion/co-ion selectivity and proton-blocking ability. These results establish a new design paradigm for high-performance, phase separated charged polymer membranes that overcome the limitations of homogeneous membranes, with broad implications for advanced electrochemical technologies.

36 MATERIALS SCIENCE↗

Enhanced crystalline morphology of a ladder-type polymer bulk-heterojunction device by blade-coating

A blade-coating process was employed to fabricate bulk-heterojunction (BHJ) polymer solar cells based on a ladder-type polymer (PIDT-PhanQ) with low crystallinity. Compared to the devices processed by a conventional spin-coating method, an intriguing morphology with enhanced phase-separation and increased crystallinity was achieved. As a result, power conversion efficiency up to 7.25% could be achieved from the blade-coated PIDT-PhanQ:PC 71 BM BHJ film, surpassing the original value obtained by spin-coating (6.29%). In this work, this improved photovoltaic performance is attributed to the improved charge carrier mobilities, which correlates well with the increased crystallinity and the organized network of the donor–acceptor phases that produce efficient charge-transporting pathways.

36 MATERIALS SCIENCE↗

Synthesis of monodisperse high entropy alloy nanocatalysts from core@shell nanoparticles

We report that high-entropy alloy (HEA) nanoparticles (NPs) hold great promise in electrocatalysis because of their nearly unlimited compositions, tailorable active sites, and high durability. However, the synthesis of these compositionally complex structures as monodisperse NPs remains a challenge by colloidal routes because the different rates of metal precursor reduction lead to phase separation. Here, we report the conversion of core@shell NPs into HEA NPs through annealing, with conservation of sample monodispersity. This potentially general route for high-quality HEA NPs was demonstrated by preparing PdCu@PtNiCo NPs via seed-mediated co-reduction, wherein Pt, Ni, and Co were co-deposited on PdCu seeds in solution. These multimetallic NPs were then converted to single-crystalline and single-phase PdCuPtNiCo NPs through annealing. On account of their small particle size, highly dispersed Pt/Pd content, and low elemental diffusivity, these HEA NPs were found to be a highly efficient and durable catalyst for the oxygen reduction reaction. They were also highly selective for the four-electron transfer pathway. We expect that this new synthetic strategy will facilitate the synthesis of new HEA NPs for catalysis and other applications.

36 MATERIALS SCIENCE↗

Barriers to carriers: faults and recombination in non-stoichiometric perovskite scintillators

Abstract Tuning the efficiency and speed of charge carrier recombination in inorganic scintillators can potentially improve their performance in diverse applications. Recent work suggests that this maybe be achieved via a two-phase scintillator AB that naturally phase separates into A -rich and B -rich domains. In addition, a favorable electronic structure and band-edge alignment such that the charge carriers are confined or are thermodynamically driven to preferentially accumulate in one of the two domains, might lead to an improved radiative recombination rate. Here, we use density functional theory computations and ab initio molecular dynamics (AIMD), including non-adiabatic molecular dynamics (NAMD) simulations, to examine an alternative phase structure and its potential impact on recombination. Using a model perovskite SrTiO $$_3$$ 3 system with one-, two- and three-dimensional Ruddlesden–Popper (RP) phases, we demonstrate that RP faults induce band structure changes in the material that can act as barriers to carrier transport. Our AIMD/NAMD simulations indicate competing effects of a lower mean free path (potentially enhancing the desired radiative recombination and overall scintillating efficiency) and faster non-radiative recombination (undesired) due to enhanced electron–phonon coupling in the faulted system. Full exploitation of such a rational design approach would require tuning of the effective scintillation efficiency by varying the perovskite chemistry using appropriate arrangements of RP faults in the bulk material. Finally, other effects, such as the tendency of point defects to segregate at the interface, that might affect the overall performance, are briefly discussed. We expect the basic results found here to apply to other nanostructured scintillators. Graphical Abstract

36 MATERIALS SCIENCE↗

Triblock polymers for nanoporous membranes

The fabrication of nanoporous thin-film membranes from block polymers is proposed. A computational modeling effort is described, which optimizes the polymer block lengths in order to obtain thermodynamically favorable phase-separated morphologies. Synthetic rout es to access poly(ethylene oxide) and poly (methyl methacrylate)-based block polymers are outlined. These materials were then prepared using controlled free rad ical polymerization. The relative advantages and disadvantages of numerous routes are discussed. Characterization of di- and triblock polymers using nuclear magnetic resonance spectroscopy and size-exclusion chromatograph revealed less than ideal re-initiation and cha in growth o f macroinitiators. Preliminary phase-behavior of these materials is reported from small angle x-ray scattering and scanning electron microscopy.

Cordaro, Joseph Gabriel↗

Ordered, microphase-separated, noncharged-charged diblock copolymers via the sequential ATRP of styrene and styrenic imidazolium monomers

A series of imidazolium-based noncharged-charged diblock copolymers (1) was synthesized by the direct, sequential ATRP of styrene and styrenic imidazolium bis(trifluoromethyl)sulfonamide monomers with methyl, n-butyl, and n-decyl side-chains. Small-angle X-ray scattering studies on initial examples of 1 with a total of 50 repeat units and styrene:imidazolium-styrene repeat unit ratios of 25:25, 20:30, and 15:35 showed that their ability to form ordered nanostructures (i.e., sphere and cylinder phases) in their neat states depends on both the block ratio and the length of the alkyl side-chain on the imidazolium monomer. To our knowledge, the synthesis of imidazolium-based BCPs that form ordered, phase-separated nanostructures via direct ATRP of immiscible co-monomers is unprecedented. (C) 2014 Elsevier Ltd. All rights reserved.

Shi, ZX↗

Efficient and Robust Dynamic Crosslinking for Compatibilizing Immiscible Mixed Plastics through In Situ Generated Singlet Nitrenes

Abstract Creating a sustainable economy for plastics demands the exploration of new strategies for efficient management of mixed plastic waste. The inherent incompatibility of different plastics poses a major challenge in plastic mechanical recycling, resulting in phase‐separated materials with inferior mechanical properties. Here, this study presents a robust and efficient dynamic crosslinking chemistry that effectively compatibilizes mixed plastics. Composed of aromatic sulfonyl azides, the dynamic crosslinker shows high thermal stability and generates singlet nitrene species in situ during solvent‐free melt‐extrusion, effectively promoting C─H insertion across diverse plastics. This new method demonstrates successful compatibilization of binary polymer blends and model mixed plastics, enhancing mechanical performance and improving phase morphology. It holds promise for managing mixed plastic waste, supporting a more sustainable lifecycle for plastics.

Chemistry↗

Local structures in mixed Li{sub x}Fe{sub 1−y}M{sub y}PO{sub 4} (M=Co, Ni) electrode materials

We employ {sup 57}Fe Mössbauer spectroscopy as a local tool to probe electrical environments of Fe{sup 2+} and Fe{sup 3+} at different lithiation (x) and cation-substitution (y) levels in Li{sub x}Fe{sub 1−y}M{sub y}PO{sub 4}/C (M=Co, Ni) Li-ion battery electrode materials. Upon delithiation the local environment of Fe{sup 3+} remains unaffected for the parent y=0 system due to the LiFePO{sub 4}/FePO{sub 4} phase separation, whereas for y>0 changes in the electrical environment are seen for Fe{sup 3+}. When the Fe{sup 2+}/Fe{sup 3+} redox couple is partially-delithiated, a decreasing quadrupole splitting value is observed for Fe{sup 3+} with increasing y, implying a more symmetric electrical environment. The increasing concentration of the Co{sup 2+}/Ni{sup 2+} substituent introduces increasing amounts of Li atoms in the Fe{sup 3+}-containing phase, and these nearest-neighbor Li atoms are suspected to cause the changes seen in the local environment of Fe{sup 3+}. - Graphical abstract: Local environment of iron in Li{sub x}Fe{sub 1−y}(Co/Ni){sub y}PO{sub 4} is studied by {sup 57}Fe Mössbauer spectroscopy at different lithiation (x) and cation-substitution (y) levels. - Highlights: • Local Fe environment in Li{sub x}Fe{sub 1−y}(Co/Ni){sub y}PO{sub 4} is studied by {sup 57}Fe Mössbauer spectroscopy. • Co/Ni-for-Fe substitution results in a more symmetric electrical environment for Fe{sup 3+}. • Due to presence of Co{sup 2+}/Ni{sup 2+}, Li atoms are introduced into the Fe{sup 3+}-containing phase. • These nearest-neighbor Li atoms are suggested to change the local Fe{sup 3+} environment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Substrate Partitioning into Protein Macromolecular Frameworks for Enhanced Catalytic Turnover

Spatial partitioning of chemical processes is an important attribute of many biological systems, the effect of which is reflected in the high efficiency of enzymes found within otherwise chaotic cellular environments. Barriers, often provided through the formation of compartments or phase segregation, gate the access of macromolecules and small molecules within the cell and provide an added level of metabolic control. Taking inspiration from nature, we have designed virus-like particles (VLPs) as nanoreactor compartments that sequester enzyme catalysts and have used these as building blocks to construct 3D protein macromolecular framework (PMF) materials, which are structurally characterized using small-angle X-ray scattering (SAXS). Additionally, the highly charged PMFs form a separate phase in suspension, and by tuning the ionic strength, we show positively charged molecules preferentially partition into the PMF, while negatively charged molecules are excluded. This molecular partitioning was exploited to tune the catalytic activity of enzymes enclosed within the individual particles in the PMF, the results of which showed that positively charged substrates had turnover rates that were 8500× faster than their negatively charged counterparts. Moreover, the catalytic PMF led to cooperative behavior resulting in charge dependent trends opposite to those observed with individual P22 nanoreactor particles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Consequences of Lattice Mismatch for Phase Equilibrium in Heterostructured Solids

Lattice mismatch - the difference in natural bond length between two species comprising a solid is a common occurrence in modern materials. Spatial patterns in certain nanocrystal heterostructures, for instance, are thought to be a result of elastic forces arising from lattice mismatch. However, the role of lattice mismatch in mediating the arrangement of atoms in such materials is incompletely understood. Here we consider a simple microscopic model for lattice mismatch, in which the difference in natural lengths between bonded atoms produces interactions mediated by elastic strain. Computer simulations reveal that the model exhibits rich phase behavior, including structures with periodic order and unusual coexistence scenarios. To explain this phase behavior, we derive an effective pairwise interaction potential between atoms, revealing preferred spatial arrangements of atoms driven by spatial variations in the interaction potential. We then develop a mean field theory based on this effective interaction which qualitatively captures observed transition to phases with modulated order. Finally, we explain the observed scenarios of coexistence between using a graphical construction, based on the realization that the free energy cost of phase separation in elastic systems grows with system size. Here, these results clarify the equilibrium effects of lattice mismatch in macroscopic solids and suggest a role for lattice mismatch in creating spatially heterogeneous compositions in nanoscale materials.

36 MATERIALS SCIENCE↗