Search NASA⌕ Search

SEARCH · Search NASA

Results for “program architectures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Status of NASA's Space Launch System

NASA's Space Launch System (SLS) continued to make significant progress in 2015, completing hardware and testing that brings NASA closer to a new era of deep space exploration. The most significant program milestone of the year was completion of Critical Design Review (CDR). A team of independent reviewers concluded that the vehicle design is technically and programmatically ready to move to Design Certification Review (DCR) and launch readiness in 2018. Just four years after program start, every major element has amassed development and flight hardware and completed key tests that will set the stage for a growing schedule of manufacturing and testing in 2016. Key to SLS' rapid progress has been the use of existing technologies adapted to the new launch vehicle. The space shuttle-heritage RS-25 engine is undergoing adaptation tests to prove it can meet SLS requirements and environments with minimal change. The four-segment shuttle-era booster has been modified and updated with an additional propellant segment, new insulation, and new avionics. The Interim Cryogenic Upper Stage is a modified version of an existing upper stage. The first Block I SLS configuration will launch a minimum of 70 metric tons (t) of payload to low Earth orbit (LEO). The vehicle architecture has a clear evolutionary path to more than 100t and, ultimately, to 130t. Among the program's major accomplishments in 2015 were the first booster qualification hotfire test, a series of seven RS-25 adaptation hotfire tests, manufacturing of most of the major components for both core stage test articles and first flight tank, delivery of the Pegasus core stage barge, and the upper stage simulator. Renovations to the B-2 test stand for stage green run testing was completed at NASA Stennis Space Center. This year will see the second booster qualification motor hotfire, flight and additional development RS-25 engine tests, and completion of core stage test articles and test stands and several flight article sections. This paper will discuss these and other technical and programmatic successes and challenges over the past year and provide a preview of work ahead before the first flight of this new capability.

Lyles, Garry↗

MBASIC batch processor architectural overview

The MBASIC (TM) batch processor, a language translator designed to operate in the MBASIC (TM) environment is described. Features include: (1) a CONVERT TO BATCH command, usable from the ready mode; and (2) translation of the users program in stages through several levels of intermediate language and optimization. The processor is to be designed and implemented in both machine-independent and machine-dependent sections. The architecture is planned so that optimization processes are transparent to the rest of the system and need not be included in the first design implementation cycle.

Reynolds, S. M.↗

Performance Portability of HPC Discovery Science Software: Fusion Energy Turbulence Simulations at Extreme Scale

As HPC R&D moves forward on a variety of “path to exascale” architectures today, an associated objective is to demonstrate performance portability of discovery-science-capable software. Important application domains, such as Magnetic Fusion Energy (MFE), have improved modelling of increasingly complex physical systems -- especially with respect to reducing “time-to-solution” as well as “energy to solution.” The emergence of new insights on confinement scaling in MFE systems has been aided significantly by efficient software capable of harnessing powerful supercomputers to carry out simulations with unprecedented resolution and temporal duration to address increasing problem sizes. Specifically, highly scalable particle-in-cell (PIC) programing methodology is used in this paper to demonstrate how modern scientific applications can achieve efficient architecture-dependent optimizations of performance scaling and code portability for path-to-exascale platforms.

97 MATHEMATICS AND COMPUTING↗

Cassini Archive Tracking System

The Cassini Archive Tracking System (CATS) is a computer program that enables tracking of scientific data transfers from originators to the Planetary Data System (PDS) archives. Without CATS, there is no systematic means of locating products in the archive process or ensuring their completeness. By keeping a database of transfer communications and status, CATS enables the Cassini Project and the PDS to efficiently and accurately report on archive status. More importantly, problem areas are easily identified through customized reports that can be generated on the fly from any Web-enabled computer. A Web-browser interface and clearly defined authorization scheme provide safe distributed access to the system, where users can perform functions such as create customized reports, record a transfer, and respond to a transfer. CATS ensures that Cassini provides complete science archives to the PDS on schedule and that those archives are available to the science community by the PDS. The three-tier architecture is loosely coupled and designed for simple adaptation to multimission use. Written in the Java programming language, it is portable and can be run on any Java-enabled Web server.

Conner, Diane↗

System and Propagation Availability Analysis for NASA's Advanced Air Transportation Technologies

This report summarizes the research on the System and Propagation Availability Analysis for NASA's project on Advanced Air Transportation Technologies (AATT). The objectives of the project were to determine the communication systems requirements and architecture, and to investigate the effect of propagation on the transmission of space information. In this report, results from the first year investigation are presented and limitations are highlighted. To study the propagation links, an understanding of the total system architecture is necessary since the links form the major component of the overall architecture. This study was conducted by way of analysis, modeling and simulation on the system communication links. The overall goals was to develop an understanding of the space communication requirements relevant to the AATT project, and then analyze the links taking into consideration system availability under adverse atmospheric weather conditions. This project began with a preliminary study of the end-to-end system architecture by modeling a representative communication system in MATLAB SIMULINK. Based on the defining concepts, the possibility of computer modeling was determined. The investigations continue with the parametric studies of the communication system architecture. These studies were also carried out with SIMULINK modeling and simulation. After a series of modifications, two end-to-end communication links were identified as the most probable models for the communication architecture. Link budget calculations were then performed in MATHCAD and MATLAB for the identified communication scenarios. A remarkable outcome of this project is the development of a graphic user interface (GUI) program for the computation of the link budget parameters in real time. Using this program, one can interactively compute the link budget requirements after supplying a few necessary parameters. It provides a framework for the eventual automation of several computations required in many experimental NASA missions. For the first year of this project, most of the stated objectives were accomplished. We were able to identify probable communication systems architectures, model and analyze several communication links, perform numerous simulation on different system models, and then develop a program for the link budget analysis. However, most of the work is still unfinished. The effect of propagation on the transmission of information in the identified communication channels has not been performed. Propagation effects cannot be studied until the system under consideration is identified and characterized. To study the propagation links, an understanding of the total communications architecture is necessary. It is important to mention that the original project was intended for two years and the results presented here are only for the first year of research. It is prudent therefore that these efforts be continued in order to obtain a complete picture of the system and propagation availability requirements.

Ugweje, Okechukwu C.↗

Final Technical Report for: A Unified Data-Driven Approach for Programming In Situ Analysis and Visualization

The placement and movement of data is becoming the key limiting factor on both performance and energy efficiency of high performance computations. As systems generate more data, it is becoming increasingly difficult to actually move that data elsewhere for post-processing, as the rate of improvements in supporting I/O infrastructure is not keeping pace. Together, these trends are creating a shift in how we think about exascale computations, from a viewpoint that focuses on FLOPS to one that focuses on data and data-centric operations as fundamental to the reasoning about, and optimization of, scientific workflows on extreme-scale architectures. The overarching goal of our effort was the study of a unified data-driven approach for programming applications and in situ analysis and visualization. Our work was to understand the interplay between data-centric programming model requirements at extreme-scale and the overall impact of those requirements on the design, capabilities, flexibility, and implementation details for both applications and the supporting in situ infrastructure. In this context, we made many improvements to the Legion programming system (one of the leading data-centric models today) and demonstrated in situ analyses on real application codes using these improvements.

97 MATHEMATICS AND COMPUTING↗

NASA Small Spacecraft Technology Program

NASA's Small Spacecraft Technology (SST) program within NASA’s Space Technology Mission Directorate, expands the ability to execute unique missions through rapid development and demonstration of capabilities for small spacecraft applicable to exploration, science and the commercial space sector. Through targeted development and frequent in space testing, the program: Enables execution of missions at much lower cost than previously possible; Substantially reduces the time required for development of spacecraft; Enables new mission architectures through the use of small spacecraft; Expands the reach of small spacecraft to new destinations and challenging new environments; and Enables the augmentation of existing assets and future missions with supporting small spacecraft. An overview the program's technology demonstration missions will be provided.

Roger C Hunter↗

Distributed phased array architecture study

Variations in amplifiers and phase shifters can cause degraded antenna performance, depending also on the environmental conditions and antenna array architecture. The implementation of distributed phased array hardware was studied with the aid of the DISTAR computer program as a simulation tool. This simulation provides guidance in hardware simulation. Both hard and soft failures of the amplifiers in the T/R modules are modeled. Hard failures are catastrophic: no power is transmitted to the antenna elements. Noncatastrophic or soft failures are modeled as a modified Gaussian distribution. The resulting amplitude characteristics then determine the array excitation coefficients. The phase characteristics take on a uniform distribution. Pattern characteristics such as antenna gain, half power beamwidth, mainbeam phase errors, sidelobe levels, and beam pointing errors were studied as functions of amplifier and phase shifter variations. General specifications for amplifier and phase shifter tolerances in various architecture configurations for C band and S band were determined.

Bourgeois, Brian↗

Component-Level Electronic-Assembly Repair (CLEAR) System Architecture

This document captures the system architecture for a Component-Level Electronic-Assembly Repair (CLEAR) capability needed for electronics maintenance and repair of the Constellation Program (CxP). CLEAR is intended to improve flight system supportability and reduce the mass of spares required to maintain the electronics of human rated spacecraft on long duration missions. By necessity it allows the crew to make repairs that would otherwise be performed by Earth based repair depots. Because of practical knowledge and skill limitations of small spaceflight crews they must be augmented by Earth based support crews and automated repair equipment. This system architecture covers the complete system from ground-user to flight hardware and flight crew and defines an Earth segment and a Space segment. The Earth Segment involves database management, operational planning, and remote equipment programming and validation processes. The Space Segment involves the automated diagnostic, test and repair equipment required for a complete repair process. This document defines three major subsystems including, tele-operations that links the flight hardware to ground support, highly reconfigurable diagnostics and test instruments, and a CLEAR Repair Apparatus that automates the physical repair process.

Oeftering, Richard C.↗

An architectural approach to create self organizing control systems for practical autonomous robots

For practical industrial applications, the development of trainable robots is an important and immediate objective. Therefore, the developing of flexible intelligence directly applicable to training is emphasized. It is generally agreed upon by the AI community that the fusion of expert systems, neural networks, and conventionally programmed modules (e.g., a trajectory generator) is promising in the quest for autonomous robotic intelligence. Autonomous robot development is hindered by integration and architectural problems. Some obstacles towards the construction of more general robot control systems are as follows: (1) Growth problem; (2) Software generation; (3) Interaction with environment; (4) Reliability; and (5) Resource limitation. Neural networks can be successfully applied to some of these problems. However, current implementations of neural networks are hampered by the resource limitation problem and must be trained extensively to produce computationally accurate output. A generalization of conventional neural nets is proposed, and an architecture is offered in an attempt to address the above problems.

Greiner, Helen↗

Extracting SIMD Parallelism from Recursive Task-Parallel Programs

The pursuit of computational efficiency has led to the proliferation of throughput-oriented hardware, from GPUs to increasingly wide vector units on commodity processors and accelerators. This hardware is designed to efficiently execute data-parallel computations in a vectorized manner. However, many algorithms are more naturally expressed as divide-and-conquer, recursive, task-parallel computations. In the absence of data parallelism, it seems that such algorithms are not well suited to throughput-oriented architectures. This paper presents a set of novel code transformations that expose the data parallelism latent in recursive, task- parallel programs. These transformations facilitate straightforward vectorization of task-parallel programs on commodity hardware. We also present scheduling policies that maintain high utilization of vector resources while limiting space usage. Across several task-parallel benchmarks, we demonstrate both efficient vector resource utilization and substantial speedup on chips using Intel’s SSE4.2 vector units, as well as accelerators using Intel’s AVX512 units. We then show through rigorous sampling that, in practice, our vectorization techniques are effective for a much larger class of programs.

Recursive Programs, task parallelism, vectorizatio↗

XMOS XC-2 Development Board for Mechanical Control and Data Collection

The scanning microwave limb sounder (SMLS) will use technological improvements in low-noise mixers to provide precise data on the Earth s atmospheric composition with high spatial resolution. This project focuses on the design and implementation of a realtime control system needed for airborne engineering tests of the SMLS. The system must coordinate the actuation of optical components using four motors with encoder readback, while collecting synchronized telemetric data from a GPS receiver and 3-axis gyrometric system. A graphical user interface for testing the control system was also designed using Python. Although the system could have been implemented with an FPGA(fieldprogrammable gate array)-based setup, a processor development kit manufactured by XMOS was chosen. The XMOS architecture allows parallel execution of multiple tasks on separate threads, making it ideal for this application. It is easily programmed using XC (a subset of C). The necessary communication interfaces were implemented in software, including Ethernet, with significant cost and time reduction compared to an FPGA-based approach. A simple approach to control the chopper, calibration mirror, and gimbal for the airborne SMLS was needed. The XMOS board allows for multiple threads and real-time data acquisition. The XC-2 development kit is an attractive choice for synchronized, real-time, event-driven applications. The XMOS is based on the transputer microprocessor architecture developed for parallel computing, which is being revamped in this new platform. The XMOS device has multiple cores capable of running parallel applications on separate threads. The threads communicate with each other via user-defined channels capable of transmitting data within the device. XMOS provides a C-based development environment using XC, which eliminates the need for custom tool kits associated with FPGA programming. The XC-2 has four cores and necessary hardware for Ethernet I/O.

Jarnot, Robert F.↗

Fortran Transformational Tools in Support of Scientific Application Development for Petascale Computer Architectures

This document is the final report for a multi-year effort building infrastructure to support tool development for Fortran programs. We also investigated static analysis and code transformation methods relevant to scientific programmers who are writing Fortran programs for petascale-class high performance computing systems. This report details our accomplishments, technical approaches, and provides information on where the research results and code may be obtained from an open source software repository. The report for the first year of the project that was performed at the University of Oregon prior to the PI moving to Galois, Inc. is included as an appendix.

97 MATHEMATICS AND COMPUTING↗

Cell-based composite materials with programmed structures and functions

The present invention is directed to the use of silicic acid to transform biological materials, including cellular architecture into inorganic materials to provide biocomposites (nanomaterials) with stabilized structure and function. In the present invention, there has been discovered a means to stabilize the structure and function of biological materials, including cells, biomolecules, peptides, proteins (especially including enzymes), lipids, lipid vesicles, polysaccharides, cytoskeletal filaments, tissue and organs with silicic acid such that these materials may be used as biocomposites. In many instances, these materials retain their original biological activity and may be used in harsh conditions which would otherwise destroy the integrity of the biological material. In certain instances, these biomaterials may be storage stable for long periods of time and reconstituted after storage to return the biological material back to its original form. In addition, by exposing an entire cell to form CSCs, the CSCs may function to provide a unique system to study enzymes or a cascade of enzymes which are otherwise unavailable.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cell-based composite materials with programmed structures and functions

The present invention is directed to the use of silicic acid to transform biological materials, including cellular architecture into inorganic materials to provide biocomposites (nanomaterials) with stabilized structure and function. In the present invention, there has been discovered a means to stabilize the structure and function of biological materials, including cells, biomolecules, peptides, proteins (especially including enzymes), lipids, lipid vesicles, polysaccharides, cytoskeletal filaments, tissue and organs with silicic acid such that these materials may be used as biocomposites. In many instances, these materials retain their original biological activity and may be used in harsh conditions which would otherwise destroy the integrity of the biological material. In certain instances, these biomaterials may be storage stable for long periods of time and reconstituted after storage to return the biological material back to its original form. In addition, by exposing an entire cell to form CSCs, the CSCs may function to provide a unique system to study enzymes or a cascade of enzymes which are otherwise unavailable.

36 MATERIALS SCIENCE↗

Cell-based composite materials with programmed structures and functions

The present invention is directed to the use of silicic acid to transform biological materials, including cellular architecture into inorganic materials to provide biocomposites (nanomaterials) with stabilized structure and function. In the present invention, there has been discovered a means to stabilize the structure and function of biological materials, including cells, biomolecules, peptides, proteins (especially including enzymes), lipids, lipid vesicles, polysaccharides, cytoskeletal filaments, tissue and organs with silicic acid such that these materials may be used as biocomposites. In many instances, these materials retain their original biological activity and may be used in harsh conditions which would otherwise destroy the integrity of the biological material. In certain instances, these biomaterials may be storage stable for long periods of time and reconstituted after storage to return the biological material back to its original form. In addition, by exposing an entire cell to form CSCs, the CSCs may function to provide a unique system to study enzymes or a cascade of enzymes which are otherwise unavailable.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mars sample return, updated to a groundbreaking approach

A Mars Sample Return (MSR) mission is a goal of the Mars Program. Recently, NASA and JPL have been studying the possibility of a Mars Sample Return some time in the next decade of Mars exploration. In 2001, JPL commissioned four industry teams to make a fresh examination of MSR architectures. Six papers on these studies were presented at last year's conference. As new fiscal realities of a cost-capped Mars Exploration Program unfolded, it was evident that these MSR concepts, which included mobility and subsurface sample acquisition, did not fit reasonably within a balanced program. Therefore, at the request of NASA and the science community, JPL asked the four industry teams plus JPL's Team X to explore ways to reduce the cost of a MSR. A NASA-created MSR Science Steering Group (SSG) established a reduced set of requirements for these new studies that built upon the previous year's work. As a result, a new 'Groundbreaking' approach to MSR was established that is well understood based on the studies and independent cost assessments by Aerospace Corporation and SAIC. The Groundbreaking approach appears to be what a contemporary, balanced Mars Exploration Program can afford, has turned out to be justifiable by the MSR Science Steering Group, and has been endorsed by the Mars science community at large. This paper gives a brief overview of the original 2001 study results and discusses the process leading to the new studies, the studies themselves, and the results.

Mars sample return↗

Presenting Model-Based Systems Engineering Information to Non-Modelers

NASA’s Human Research Program’s (HRP) Exploration Medical Capability (ExMC) Element adopted Systems Engineering (SE) principles and Model Based Systems Engineering (MBSE) tools to capture the system functions, system architecture, requirements, interfaces, and clinical capabilities for a future exploration medical system. There are many different stakeholders who may use the information in the model: systems engineers, clinicians (physicians, nurses, and pharmacists), scientists, and program managers. Many of these individuals do not have access to MBSE modeling tools or have never used these tools. Many of these individuals (clinicians, scientists, even program managers) may have no experience with SE in general let alone interpreting a systems model. The challenge faced by ExMC was how to present the content in the model to non-modelers in a way they could understand with limited to no training in MBSE or the Systems Modeling Language (SysML) without using the modeling tool. Therefore, from the model, ExMC created an HTML report that is accessible to anyone with a browser. When creating the HTML report, the ExMC SE team talked to stakeholders and received their feedback on what content they wanted and how to display this content. Factoring in feedback, the report arranges the content in a way that not only directs readers through the SE process taken to derive the requirements, but also helps them to understand the fundamental steps in an SE approach. The report includes links to source information (i.e., NASA documentation that describes levels of care) and other SE deliverables (e.g., Concept of Operations). These links were provided to aid in the understanding of how the team created this content through a methodical SE approach. This paper outlines the process used to develop the model, the data chosen to share with stakeholders, many of the model elements used in the report, the review process stakeholders followed, the comments received from the stakeholders, and the lessons ExMC learned through producing this HTML report.1Trade names and trademarks are used in this report for identification only. Their usage does not constitute an official endorsement, either expressed or implied, by the National Aeronautics and Space Administration.

Jeffrey R. Cohen↗